Godiag GT108

Super OBDI-OBDII Universal Conversion Adapter

For Cars, Trucks, Tractors, Mining Vehicles, Generators,
Boats, Motorcycles, etc.

2023.8

1
1. Disclaimer

Please review the following statement carefully:

The statement can help you quickly learn how to use GODIAG products. Please abide by the
relevant local laws. If you use the GODIAG equipment illegally, the user shall bear all the risks, and
the company will not assume any responsibility.
For the safety of yourself and others, and to avoid damage to equipment and vehicles, please read
the safety precautions carefully. Due to the variety of procedures, tools, parts and techniques used
in vehicle maintenance, the variability in how personnel operate, and the variety of diagnostic
programming applications, this manual cannot predict and provide safety recommendations for
every situation.
It is the responsibility of the automotive service technician to get a thorough understanding of the
system being tested and to use appropriate service methods and testing procedures reasonably.
When testing, you must use appropriate operating methods to avoid threats to yourself and others
in the work area, as well as to avoid damage to the equipment being used or the vehicle being
tested.
Before using the equipment, please refer to and follow the safety information and applicable test
procedures provided by the vehicle or equipment manufacturer. Please use the equipment in
accordance with the instructions in this manual, and read, understand and follow all safety
information and instructions in the manual.

2. Safety Precautions

In order to protect the safety of yourself and others and prevent damaging the
equipment and vehicles, please read the safety precautions carefully.
Since various programs, tools, parts and techniques are used for the vehicle maintenance
and different operators may have different operations, due to various kinds of diagnostics
compliers, the manual cannot predict every situation and provide related safety
suggestions.
Vehicle service technicians are in charge of fully learning about the system under tests,
and applying appropriate repairing approaches and testing programs.
When conducting tests, it’s necessary to apply proper operations to avoid personal
safety risks to yourself and other people inside the working area and prevent damages to
the equipment in use or vehicles under tests.
Before starting to use the equipment, please refer to and observe the safety information
provided by the vehicle or equipment manufacturer and applicable testing programs.
Please
use the equipment according to the Operation Manual, read, understand, and observe all
safety information and instructions included in this manual.
Please at least observe the following safety precautions working at the vehicle:
◆ Please work at a safe environment where it’s essential to keep the working area

2
 ventilated since the vehicle exhaust is harmful to human bodies.

◆ Wear goggles that meet the ANSI standard

◆ Set the gear to P (auto) or N (manual) and guarantee the parking brake is enabled
(hand brake pulled)

◆ Make sure your clothes, hair, hands, and tools stay away from the operating engine
parts or hot engine parts

◆ Place bricks before each wheel to prevent the vehicle from moving accidentally

◆ The vehicle must be attended during testing and operating

◆ Pay special attention when working around the ignition coil, distributor cap, ignition
wire, and ignition plug for that these parts can generate dangerous voltages

◆ Make sure fire extinguishers suitable for the gas/chemicals/are electrical provided
at the site

◆ Do not plug or unplug the equipment when the ignition switch is on or the engine is
working

◆ Keep the equipment dry, clean, and avoid touching oil, water or grease. Use a
clean cloth to clean the equipment.

◆ Do not operate the diagnostic equipment during driving to avoid accidents owing
to the distraction.

◆ Please refer to the maintenance manual when maintaining the vehicle and operate
strictly according to the precautions, otherwise it may cause human injury or damages
to the diagnostic equipment.

◆ Do not place the diagnostic equipment onto the distributor of the vehicle for that
strong EMI may damage the equipment.

◆ When replacing the battery with GT108, do not switch on the ignition switch or start
the vehicle.

3. Product Introduction
3
GODIAG GT108 Super OBDI-OBDII universal conversion adapter can convert the OBDI diagnostic
interface of cars, trucks, tractors, mining vehicles, generators, boats, motorcycles, individual ECU
control units, etc. into standard OBDII diagnostic interfaces through DIY wiring Interface,
convenient for car maintenance personnel to connect to OBDII diagnostic programming
equipment for data streams reading, fault codes diagnosis, programming, activation and coding...

Product Features:

1. DIY wiring, it can be converted to OBDII according to the car diagnostic interface. [Because the
definitions of diagnostic interfaces in different regions are inconsistent, the popular conversion
cables and adapters in the market cannot use different definitions of diagnostic interfaces.
GODIAG GT108 Super OBDI-OBDII can be used by maintenance engineers to connect according to
their own needs]

2. The device has reverse connection protection. (If the power supply is connected wrong, the
device will not burn out, and it will not cause harm to the OBDII diagnostic programming device.)

3. Independent GND4, GND5. (It is more suitable for judging the problem of poor grounding of
some control units.)

4. Analog IGN switch. (Press the IGN switch, the corresponding port outputs ING VCC)

5. Power indicator, GND4, GND5 switching indicator, IGN switching indicator.

6. DIY the way to lock the wire. Equipped with different diagnostic interface cables, ECU cables,
and locking screwdrivers.

7. Truck wiring kit, car and motorcycle wiring kit, (Different configurations of wiring kits are
different, please purchase according to maintenance needs.)

4. Outlook

4
1. OBD2 female interface
2. Indicator light group
3.GND4. GND5 switch
4.IGN switch
5. DC power interface
6. 1.2.3.GND4.GND5.6CAN-H.7K-Line.8.9.10.11.12.13.14CAN-L. 15. BAT+.O-IGN interface

5. How to Use GT108

5
Steps:

1. Find the definition of the diagnostic interface (find the maintenance manual of your own vehicle, or
search online.), or see the definition diagram of the corresponding diagnostic interface of the GT108
manual.

2. According to the interface definition, find out the connection line needed by your car, and connect
to the GT108 adapter according to the definition. (Use a screwdriver to lock the terminal.)

3. Connect the connected diagnostic cable to the vehicle OBD1 diagnostic interface according to the
definition. (Connect GND 4 or GND5 first, and then connect BAT+. If the power cable is connected
correctly, the POW light of the GT108 host will light up. If the vehicle diagnostic interface does not
have power, please connect the car battery to the DC power connector of GT108 with the battery
cable. If the vehicle needs the ignition signal, connect the O-IGN line, and press the IGN switch, the
corresponding IGN light will light up, and the O-IGN line will output the ignition power signal.)

4. Connect the communication line CAN or K-line to the diagnostic interface. (Note: If it is the truck
diagnostic software added by the car diagnostic equipment, you need to buy a GT106 24V to 12V
adapter.)

5. Connect the diagnostic device to start diagnosing the vehicle.

Note: If you cannot find the definition for your own vehicle diagnostic interface, you can first find out the
power supply of the diagnostic interface. First use the black battery clip on the battery connection cable to
connect the negative pole of the battery, and then use the BAT+ line to connect to the diagnostic interface
to find the power supply. You can also use a multimeter to find the diagnostic interface power supply. The
definition of the diagnostic interface can also be judged by the GT101 Pirt Electric Circuit Tester device.

6
7
6. Car Connection Method

7. Truck Connection Method

8
8. Truck Connection with GT106

9. Motorcycle Connection Method

9
10. The Connection Method of Mine Vehicles, Tractors,
Boats and Generators

11. ECU Connection Method

12. Car Diagnostic Interface Definition

10
AUDI VW Skoda Seat 1989-1997

AUDI VW Skoda Seat 1996-2008

BMW Motorcysle OLD S1000RR

BMW Motorcysle S1000R 2015

Ford 5or3 PIN 1989-1996

Ford Mazda 6PIN 1980-1995

AUDI

11
BMW

BMW Mini 20PIN DLC

12
BMW old 15PIN

Citroen Peugeot OBD2 car

13
Citroen Peugeot 30PIN

Citroen Peugeot OBD2

14
Citroen Peugeot 30PIN to OBD2

Citroen Peugeot 30PIN

15
Citroen Peugeot Renault PSA VAN-BUS DLC

Citroen Peugeot Renault PSA VAN-BUS 1997-2006

16
Daewoo 12PIN

Daewoo Car

17
FIAT Alfa Lancia 3PIN

Fiat Car

18
Ford 6+1 to OBDII

Ford Car

19
GM Car

Honda Accord 3PIN

20
Honda Accord 5PIN

21
Honda Accord Car

Hyundai 12PIN

Hyundai 1996 NONSTD OBDII

22
Isuzu CAR

23
Kia 20PIN

Kia Car

24
Mazda Car

Mercedes BENZ 8PIN

25
Mercedes BENZ-38PIN

Mercedes BENZ 14PIN

26
Mercedes BENZ Car

Mercedes BENZ Old 9PIN

27
Mercedes BENZ Old 16PIN

Mitsubishi Car

28
Mitsubishi Old 12PIN

Nissan 14PIN

29
Nissan Car

Opel 10PIN to OBDII

30
Opel Car

Renault CAR

31
Renault Old 12PIN

SAAB Car

32
Skoda Car

Subaru Car

33
Subaru Old 9PIN

Suzuki Car

34
Toyota 17PIN

Toyota 23PIN

35
Toyota/Lexus Car

Vendor-Specific OBDII

36
Volkswagen Car

Volvo 12PIN 1985-1995

37
Volvo Car

13. Truck, Tractor, Motorcycle Diagnostic Interface

Definition
BMW motorcycle 10PIN

38
CAT 9PIN

DAF Truck 16PIN

39
DAF Truck 16PIN For CF XF

DAF Truck 16PIN For LF CF65 and others

40
Deutz Agrotron MK3 14PIN

Interfaz Car

41
Iveco 30PIN

Iveco 30PIN

42
Jhon Deere 9PIN

Kubota 4PIN

43
Landini New Holland 30PIN

MAN Car

44
MAN 12PIN

MAN 37 PIN

45
Massey Ferguson 16PIN

McCormick tractor 9PIN

46
Nissan Atleon Truck

Renault Magnum Midlum Premium Truck

47
Renault Volvo Truck

Scania 16PIN

48
14. Packing List

1pc x GODIAG GT108 Super OBDI-OBDII Universal Conversion Adapter

1pc x Truck & Car Diagnostic Interface Connection Jumper Kit (optional)
1pc x Power Cord with Battery Clips
1pc x Screwdriver
1pc x DC Plug 5.5*2.1mm to 5.5*2.5mm

15. Warranty Service

This product provides one-year warranty service.

This warranty does not apply to damages caused by improper use, accident, flood, lightning, or if
the product was altered or repaired by anyone other than the Manufacturer’s Service Center.
If the device needs to be repaired, please fill in the service information below:
Contact name
Return address
Phone Number
Concise and Comprehensive Problem Description:
Proof of Purchase
Send the device to the local dealer.

Shenzhen Sinoy Technology Co.,Ltd

All rights reserved.
www.godiag.com
+86 18813687743
[email protected]

Thanks for reading!

49