All rights reserved.

Passing on and copying of this

document, use and communication of its contents
not permitted without written authorization.
1AA 00014 0004 (9007) A4 IDSS (9206)

ED
07
Application rules

RAU–HC01–B1
ALL 11 PAGES AT EDITION 07

DATE–NO:
Official Copy
RAU–HC01–B1

SIGN: MVD SH444

211 64138 BAAA BG

1
COMPUTER GENERATED (IDSS)
 
 


CONTENTS
All rights reserved. Passing on and copying of this
document, use and communication of its contents

1.RACK DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
not permitted without written authorization.

1.1.Functional content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2.Power figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.CONSIDERATION TO BUILD UP THE RACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1.PBA equipment option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2.Cabling options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3.Strapping options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4.Optional parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.RACK LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4.BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1AA 00014 0004 (9007) A4 IDSS (9206)

ED 




2
 
 


LIST OF ILLUSTRATIONS

Figure 1 Cabling of ”c”–wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Figure 2 Rack layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
All rights reserved. Passing on and copying of this
document, use and communication of its contents

Figure 3 Block diagram I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

not permitted without written authorization.

Figure 4 Block diagram II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1AA 00014 0004 (9007) A4 IDSS (9206)

ED 




3
 Application rules Official Copy

1. RACK DESCRIPTION

1.1. Functional content

All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization.

This rack fully equipped provides for:

– 8 x DTM (Digital Trunk Modules) = 240 channels

– 6 x ASM (Analog Subscriber Modules) = 768 analog lines
– 2 x SCM (Service Circuit Modules) = 64 MF S/R (without conf. bridge)
= 32 HF S/R (with conf. bridge)
– 4 x ACE (Auxiliary Control Element)
–––––––––––––––––––––––––––––––––
– 1(2) TSU (Terminal Sub Unit) = 2(4) AS (Access Switch)

1.2. Power figures

Rack consumption for actual traffic 0,2E = 1282W

All values are given in watts and should be taken as reference; detailed calculations, based upon latest
power figures, should be made for each application.

2. CONSIDERATION TO BUILD UP THE RACK

– This rack cannot be used as leadrack

– This rack provides DTM’s without cross–over.

In case of RIM application of DTM’s the strapping plugs, connecting the PCM–busses have to be
replaced by CAE dependent cabling in order to get two RIM’s crossed over.

– Rack cabling allows for double testbus or single testbus.

The double testbus facility can be used if the corresponding HW (PBA’s ALCX , TAUA and RNGA)
and SW are provided. In case of single testbus there must be used a jumpering plug (see strapping
options).

2.1. PBA equipment option

Legend for rack layout

ACN ACEN N=1..4

 RCLX Either PBA–RCLK or PBA–RCLA
+ RLMX Either PBA–RLMA or PBA–RLMB or PBA–RLMC
< TCPX Used TCPA or TCPB
ALCX Either PBA–ALCB or PBA–ALCK
 In case of conf. bridge is required
– Equip PBA–SCB or BPA–conf in the positions 08::37 and/or 08::53
– PBA–MFP in positions 08::39 and/or 08::55 are not allowed to equip

1AA 00014 0004 (9007) A4 IDSS (9206)

DTRX Either PBA–DTRE , PBA–DTRH or PBA–DTRI (with MCUB)

MCUX Either PBA–MCUA or PBA–MCUB
∆ MCUX Either PBA–MCUA or PBA–MCUB or PBA–MCUC
PBA–MCUC is supported from SKR7.4 onwards.

ED 07

211 64138 BAAA BG 4

 Application rules Official Copy

2.2. Cabling options

The DTM’s in this rack are cabled without cross–over.

The cross–over is needed in case of RIM’s and the cabling must be adapted for the related modules by
All rights reserved. Passing on and copying of this
document, use and communication of its contents

the CAE department.

not permitted without written authorization.

Cross–over BPA Remove plug Add cables

(RIM’s)

DTM 1 & 2 TDTB15 0MW33 1FA . . . 33

0MW34 1FA . . . 34
TDTA15 0MW35 1FA . . . 35
0MW36 1FA . . . 36

DTM 3 & 4 TDTB15 0MW41 1FA . . . 41

0MW42 1FA . . . 42
TDTA15 0MW43 1FA . . . 43
0MW44 1FA . . . 44

DTM 5 & 6 TDTB15 0MW49 1FA . . . 49

0MW50 1FA . . . 50
TDTA15 0MW51 1FA . . . 51
0MW52 1FA . . . 52

DTM 7 & 8 LTCG16 0MW57 1FA . . . 57

0MW58 1FA . . . 58
0MW59 1FA . . . 59
0MW60 1FA . . . 60

2.3. Strapping options

– In case of single testbus use plug 211 27908 AAGA in positions 01BA16 from SAU 02 , 03 , 06 and
07 and in positions 33BA16 from SAU 02 and 03.

– Cabling of ’C’–wires to the MDF

There are maximum 36 C–wires sense (CWS) and 36 C–wires drive (CWD) available per line
module, (128 lines) or a max. of 72 circuits per module can be equipped with C–wire drive/sense only.
If this cabling is required, the ’C’–wires have to be connected first on 4 input/output positions
(capacity 2x9 points) by means of strap wire (211 00293 1105 slate, section 0,25) under
responsibility of the CAE engineer (strap wires will be placed during the installation of the exchange).
From each of this input/output positions a cable 211 27999 XXXA is through connected to the MDF.
For detailed information about the position of the ’C’–wires on the line boards and the reserved I/O
positions see the added figure. The exact positions of the ’C’–wires on the I/O positions have to be
defined by the CAE engineer, taking into consideration that ’C’–wires for ’sense’ and for ’drive’ must
not be placed on two neighbouring horizontal terminals. (pairing of ’C’–wires for ’sense’ and for ’drive’
1AA 00014 0004 (9007) A4 IDSS (9206)

is forbidden).

For using of more ’C’–wires there must be make connections, directly to the line PBA’s with a special
cable.

ED 07

211 64138 BAAA BG 5

 All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization.
1AA 00014 0004 (9007) A4 IDSS (9206)

ED
Figure 1

07
Application rules

Cabling of ”c”–wires
Official Copy

211 64138 BAAA BG

6
 Application rules Official Copy

2.4. Optional parts

QTY CODE DESCRIPTION

All rights reserved. Passing on and copying of this
document, use and communication of its contents

1 211 89268 AAAA Airbaffle

not permitted without written authorization.

4 004 05531 6014 Hexagon head bolt M6

4 004 16141 3164 External toothed washer
70 211 03810 AAAA Finger for fixing MPP–profile
2 211 03787 AAAA MPP profile for fixing the curtain–cabling (100MM)
Top cabling
4 211 03787 AAAA MPP profile for fixing the curtain–cabling (100MM)
Bottom cabling
18 211 03787 AADA MPP profile for fixing the curtain–cabling (120MM)
Top cabling
15 211 03787 AADA MPP profile for fixing the curtain–cabling (120MM)
Bottom cabling
15 211 03787 AABA MPP profile for fixing the curtain–cabling (140MM)
Top cabling
16 211 03787 AABA MPP profile for fixing the curtain–cabling (140MM)
Bottom cabling
24 211 02884 AACA Hook head clamp
211 00293 1105 Wire 0,25MM slate for ’C’–wires
16 005 35268 AFAA Locking latch in case of cross–over for DTM
6 211 27908 AAGA Jumpering plug in case of single testbus

3. RACK LAYOUT

In figure 2 is shown the rack layout of the full equipped rack.

Additionally the following information is given:

– BPA partnumbers
– Module numbering (refer to block diagram of fig.3 and 4)
– Power branch (A or B) of convertors
– Convertor to module power feeding (continuous lines)
– Minimum equipment

4. BLOCK DIAGRAM

See next but two pages

1AA 00014 0004 (9007) A4 IDSS (9206)

ED 07

211 64138 BAAA BG 7

 All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization.
1AA 00014 0004 (9007) A4 IDSS (9206)

ED
Figure 2

07
Application rules

Rack layout
Official Copy

211 64138 BAAA BG

8
 All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization.
1AA 00014 0004 (9007) A4 IDSS (9206)

ED
Figure 3

07
Application rules

Block diagram I
Official Copy

211 64138 BAAA BG

9
 All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization.
1AA 00014 0004 (9007) A4 IDSS (9206)

ED
Figure 4

07
Application rules

Block diagram II
Official Copy

211 64138 BAAA BG

10
 All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization.
1AA 00014 0004 (9007) A4 IDSS (9206)

ED
UNIT:
AUTHOR:

07
EXTENSION:
Application rules

DEPARTMENT:
INFORMATION ABOUT THIS DOCUMENT

BELL

SH444
M. VAN DORST
Official Copy

211CNB950222–06

END OF DOCUMENT

211 64138 BAAA BG

11