SAFETY DATA SHEET

Universal Gear Oil Additive Package KTE-201A

Releas：4.0
Date/Revised:Jan.1,2022

Section 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE

COMPANY/UNDERTAKING
1.1. Product identifier

Product Name KTG-201A

Chemical name: Universal Gear Oil Additive Package

1.2. Relevant identified uses of the substance or mixture and uses advised against

Recommended Use For lubricating oil

Uses advised against No information available

United Nations dangerous goods number No information available

1.3. Details of the supplier of the safety data sheet

For further information, please contact

Jinzhou Kangtai Lubricant Additives CO.,Ltd.

ADD:NO.25 Fuzhou Street, Taihe District, Jinzhou City, Liaoning Province, China
Email:[email protected]
Website:www.jzkangtai.com

1.4. Emergency telephone number

Emergency Telephone 86-0532-83889090

Section 2: HAZARD IDENTIFICATION

2.1. Classification of the substance or mixture

Skin corrosion/irritation Category 2 - (H315)

Severe eye injury/irritation Category 2 - (H319)
Harm to aquatic environment - Chronic hazard Category 3 - (H412)

2.2. Label elements

Signal word
Waring

Hazard statements
H315- Causes skin irritation
H319- Severe eye irritation

Page 1 / 6
H412- Harmful to aquatic life with long lasting effects

Precautionary Statements
P264- Clean thoroughly after operation.
P273- Do not discharge into the environment.
P280- Wear protective gloves, protective clothing, protective glasses and protective face mask.
P302+P352- Skin contact: Wash with plenty of soapy water and water.
P321- See this label for specific treatment.
P332+P313- Seek medical attention if skin irritation occurs.
P362+P364- Remove contaminated clothing and wash before reuse.
P305+P351+P338- In case of contact with eyes: Rinse carefully with water for several minutes, if contact lenses are worn and can
be easily removed, remove contact lenses and continue to rinse.
P337+P313- Seek medical attention if eye irritation continues.

2.3. Other hazards

No information available

Section 3: COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substance/ Mixture: Mixture

Ingredient(s):

Chemical name CAS No. EC No. Concentration（%）

Olefin sulfide 72162-26-6 680-213-9 30-80

4,4'-methylene bis(dibutyldithiocarbamate) 10254-57-6 233-593-1 3-20

Dibutyl phosphonate 1809-19-4 217-316-1 3-20

Base oil 64742-65-0 265-169-7 1-15

Section 4: FIRST AID MEASURES

4.1. Description of first aid measures

Inhalation If inhaled, move the patient to fresh air.

Skin contact Remove contaminated clothing and rinse skin thoroughly with soapy water and water.
If you feel unwell, seek medical advice.

Eye contact Separate eyelids and rinse with running water or saline. Seek immediate medical
attention.

Ingestion Gargle, prohibit vomiting. Seek immediate medical attention.

4.2. Most important symptoms and effects, both acute and delayed

Symptoms Cause skin irritation. Cause severe eye irritation.

4.3. Special tips for doctors: Move the patient to a safe place. Consult a doctor. Show this chemical safety
technical instruction to the doctor on site.

4.4. Personal protection of first aid It is important that medical personnel are informed of the substances involved and
personnel: take precautions to protect themselves. If exposed or concerned: Seek medical
attention. Remove all contaminated clothing immediately. Contaminated clothes can
be reused after cleaning.

Section 5: FIRE-FIGHTING MEASURES

5.1. Extinguishing media

Suitable Extinguishing Media Extinguish the fire with water spray, dry powder, foam or carbon dioxide extinguishing
agent.
Page 2 / 6
Unsuitable extinguishing media Avoid using direct running water to extinguish fires. Direct running water may cause
splashes of flammable liquids and spread the fire.

5.2. Special hazards arising from the substance or mixture

Specific hazards arising from the chemical Cause skin irritation. Cause severe eye irritation.

Hazardous combustion products There is no particular risk of explosion or combustion.

5.3. Advice for firefighters

Special protective equipment for fire-fighters Fire fighters should wear suitable protective equipment to fight fire upwind. If
possible, move containers from the fire to an open area. Spray water to keep the fire
container cool until the end of the fire. Containers in the fire must be evacuated
immediately if they are discolored or make noise from the safety relief device. Isolate
the accident site and forbid irrelevant personnel to enter. Receive and treat fire water
to prevent environmental pollution.

Section 6: ACCIDENTAL RELEASE MEASURES

6.1. Personal precautions, protective Emergency personnel are advised to wear air-carrying breathing apparatus, antistatic
equipment and emergency procedures clothing, and rubber oil-resistant gloves.
Do not touch or walk over the spill.
All equipment used during operation should be connected to the ground.
Cut off the source of leakage as much as possible. Eliminate all ignition sources.
According to the liquid flow, steam or dust diffusion of the affected area demarcated
warning zone, irrelevant personnel from the crosswind, upwind evacuation to the
safety zone.

6.2. Environmental precautions Absorb the leakage to avoid polluting the environment. Prevent leakage into sewers,
surface water and groundwater.

6.3. Methods and material for containment Small leakage: Collect the leaking liquid in an airtight container if possible. Absorb
and cleaning up with sand, activated carbon or other inert materials and transfer to a safe place. No
flushing down the drain.
Large amount of leakage: build embankment or dig pit reception. Seal the drainage
pipe. Cover with foam to inhibit evaporation. Transfer to tank car or special collector
with explosion-proof pump, recycle or transport to waste treatment site for disposal.

Section 7: HANDLING AND STORAGE

7.1. Precautions for safe handling Operators shall be specially trained and strictly abide by the operating procedures.
The operation and disposal should be carried out in places with local ventilation or
comprehensive ventilation facilities.
Avoid eye and skin contact and avoid inhaling steam.
See section 8 for individual protective measures.
Keep away from fire and heat source. No smoking in workplace.
Use explosion-proof ventilation systems and equipment.
If canning is required, the flow rate should be controlled, and there is an earthing
device to prevent static electricity accumulation.
Avoid contact with forbidden compounds such as oxidants (see section 10 for
forbidden compounds).
Handling should be carried lightly to prevent damage to packaging and containers.
Empty containers may contain hazardous materials.
Wash hands after use and do not eat or drink in the workplace.
Equipped with the corresponding variety and quantity of fire fighting equipment and
leakage emergency treatment equipment.

7.2. Conditions for safe storage, including The product is non-flammable, non-explosive and non-corrosive. The maximum
any incompatibilities storage temperature should not exceed 75°C; For long-term storage, the maximum
temperature should not exceed 45°C.

Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

Page 3 / 6
8.1. Occupational exposure limits: No information available.

8.2. Biological limitations: No information available.

8.3. Monitoring methods: No information available.

8.4. Engineering control: It is recommended that the workplace be separated from other workplaces.
Closed operation to prevent leakage.
Enhance ventilation.
Set up automatic alarm device and emergency ventilation facilities.
Set up emergency evacuation channels and necessary danger areas.
Set up red area warning line, warning mark and Warning description in Chinese, and
set up communication alarm system.
Provide safe shower and eye wash equipment.

8.5. Personal protective equipment:

Respiratory protection: Wear a protective mask and bring an air respirator if necessary.

Hand protection: Wear impermeable gloves.

Eye protection: Wear chemical eye protection.

Skin and body protection: Wear protective penetrant overalls.

Health measures: Avoid contact with eyes. Wash hands immediately before rest and after handling the
product.

Section 9: PHYSICAL AND CHEMICAL PROPERTIES

9.1. Information on basic physical and chemical properties
Physical state liquid
Appearance No information available
Color Transparent
Odor No information available.
Odor threshold No information available
Property Values Remarks • Method
pH No data available None known
Melting point / freezing point No data available None known
Boiling point / boiling range No data available None known
Flash point ≥90℃ ASTM D92
Evaporation rate No data available None known
Flammability (solid, gas) No data available None known
Flammability Limit in Air
Upper flammability limit: No data available None known
Lower flammability limit: No data available None known
Vapor pressure No data available None known
Vapor density No data available None known
Relative density No data available None known
Water solubility No data available None known
Solubility(ies) No data available None known
Partition coefficient No data available None known
Autoignition temperature No data available None known
Decomposition temperature No data available None known
Kinematic viscosity（40℃） No data available None known
Kinematic viscosity（100℃） No data available None known
Explosive properties No information available
Oxidizing properties No information available
9.2. Other information
Softening point No information available
Molecular weight No information available
VOC Content (%) No information available
Liquid Density No information available
Bulk density No information available
Particle Size No information available
Particle Size Distribution No information available
Page 4 / 6
 Section 10: STABILITY AND REACTIVITY
10.1. Stability: It is stable when stored and used at normal ambient temperature.

10.2 Possibility of hazardous reaction: This does not occur during normal processing.

10.3 Conditions to be avoided: No information available

10.4 Incompatible Substances: Incompatible material strong oxidant.

10.5 Dangerous decomposition products: No information available

Section 11: TOXICOLOGY INFORMATION

11.1. Acute toxicity:.

Oral No data available

Inhalation No data available

Dermal No data available

11.2.
Skin corrosion/irritation Cause skin irritation.

Severe eye injury/eye irritation Causing severe eye damage.

Respiratory or skin sensitization No information available.

Germ cell mutagenicity No information available.

carcinogenicity No information available.

The reproductive toxicity No information available.

Specific target organ toxicity - one No information available.

contact

Specific target organ toxicity - Repeated No information available.

exposure

Inhalation hazard No information available.

Section 12: ECOLOGICAL INFORMATION

12.1. Ecotoxicity:

Fish No information available.

M. class: No information available.

Algae: No information available.

Microbiology: No information available.

12.2. Persistence and degradability No information available.

12.3. Bioenrichment or bioaccumulation: No information available.

12.4. Mobility in soil No information available.

Section 13: DISPOSAL CONSIDERATIONS

Page 5 / 6
13.1 Waste Chemicals: Handle according to local regulations. Dispose of waste in accordance with
environmental regulations.

13.2 Contaminated Packaging: Do not reuse empty containers.

Section 14: TRANSPORTATION INFORMATION

14.1. UN/ID no Not regulated

14.2 Proper shipping name Not regulated

14.3. Hazard Class l Not regulated

14.4 Packing Group Not regulated

14.5 Marine Pollutants (yes/No) : No.

Section 15: REGULATORY INFORMATION

15.1. Status of global chemicals list::
IECSC Listed
TCSI Listed.
TSCA Listed.
NZIoC Listed.
PICCS Part of the listed.
AICS Part of the listed.
DSL Listed.
KECL Part of the listed.

Section 16: OTHER INFORMATION

DisclDisclaimer:
According to the latest knowledge, information and ideas available to us, the information provided in this material safety technical
specification is correct. The information provided is intended only as a guide for safe operation, use, processing, storage,
transportation, disposal and discharge and is not intended as a warranty or quality statement. This information applies only to
specified substances and may not apply to substances combined with any other substances or processed in any way, unless
otherwise specified in the context.

Page 6 / 6