CFS Series B150, B300 and B600
Fabricated Basket Strainers
Design Features:
• Standard sizes from 2” - 24”. Larger sizes available upon request.
• Available with RF or RTJ flanged (ASME B16.5) or Buttweld (ASME B16.9) end connections.
• Standard thru bolt cover design.
• Custom designs are available.
• Perforated screens are standard.
• May be installed in horizontal pipelines.
• All welders are qualified to ASME Section IX.
• Strainers designed to meet the requirements of ASME B31.1,ASME B31.3 and/or ASME Section VIII,Div.1.
• Drain is standard and is complete with plug.
• Vents, differentials and special covers are optional.
Pars List and Standard Materials
Part Carbon Steel Low Temp. Carbon Steel (-50° F) Stainless Steel 1
Shell A53 E/B / A106-B A333-6 A312
Nozzles A53 E/B / A106-B A333-6 A312
Reinforcement Pads 3 A516-70 A516-70 A240
Flanges A105 A350-LF2 A182
Heads A234-WPB / A516-70 A420-WPL6 A403-WP
Coupling/threadolets A105 A350-LF2 A182
Plug A105 A350-LF2 A182
Basket 2 304 SS 304 SS 304 SS
Gasket 2 304 SS Spiral Wound 304 SS Spiral Wound 304 SS Spiral Wound
Stud A193-B7 A193-B7 A193-B8-1
Nut A194-2H A194-2H A194-8
Notes: 1. 304SS strainers use 304 grade material. 316SS strainers use 316 grade material. Dual rated material may be used.
2. Recommended Spares.
3. When required and when used.
4. NACE MR01-75 qualification available upon request. Material specifications will change.
5. For strainers designed to ASME Section VIII, Div. 1 the “A” designation becomes “SA”.
Upper Pressure Limits (Non-Shock) and Lower Temperature Limits (Unless otherwise specified)
CFS Model (Flanged) Body Material Maximum Design Pressure Lower Temperature Limit -
at 100.°F psig (Bars) 1 M.D.M.T. °F (°C)
-
B150FSBW Carbon Steel 285 (19.65) -20 (-28.9)
B150FLCBW Low Temp. Carbon Steel 285 (19.65) -50 (-45.6)
B150FSS4BW / B150FSS6BW 304 / 316 SS 275 (18.96) -20 (-28.9) Optional -425 (-253.9)
B150FSS4LBW / B150FSS6LBW 304L / 316L SS 230 (15.86) -20 (-28.9) Optional -425 (-253.9)
B300FSBW Carbon Steel 740 (51.02) -20 (-28.9)
B300FLCBW Low Temp. Carbon Steel 740 (51.02) -50 (-45.6)
B300FSS4BW / B300FSS6BW 304 / 316 SS 720 (49.64) -20 (-28.9) Optional -425 (-253.9)
B300FSS4LBW / B300FSS6LBW 304L / 316L SS 600 (41.37) -20 (-28.9) Optional -425 (-253.9)
B600FSBW Carbon Steel 1480 (102.04) -20 (-28.9)
B600FLCBW Low Temp. Carbon Steel 1480 (102.04) -50 (-45.6)
B600FSS4BW / B600FSS6BW 304 / 316 SS 1440 (99.28) -20 (-28.9) Optional -425 (-253.9)
B600FSS4LBW / B600FSS6LBW 304L / 316L SS 1200 (82.74) -20 (-28.9) Optional -425 (-253.9)
Notes: 1. All strainers will be designed to the maximum design pressure at 100°F unless an alternative design pressure / temperature
combination is specified. In many cases a cost savings will result if lower design pressures are acceptable.
2. Lower and higher M.D.M.T.s are available upon request.
CFS Series B150 Dimensional Data
C
D
SERIES
B150 A/2 F
STYLE 1 A
Standard Screens
Series B150 — Style 1
Size Range Opening
2” - 8” (50mm - 200mm) 0.125 in. (3.2mm)
10” - 12” (250mm - 300mm) 0.125 in. (3.2mm)
14” - 24” (250mm - 600mm) 0.188 in. (4.8mm)
Notes: 1. Vents and Differentials are optional. General:
2. Cover lifting lug standard on sizes 10” and larger. 1. For further optional features see pages 21-22. 3. For pressure loss information see page 25.
2. Other perforations and screen materials available. 4. For ordering information please see page 38.
Please see page 24. 5. Dimensions shown are subject to change.
Contact factory for certified prints when required.
2
CFS Series B300 Dimensional Data
Standard Screens
Size Range Opening Gauge Thickness E
DISTANCE FOR
BASKET REMOVAL
2” - 8” (50mm - 200mm) 0.125 in. (3.2mm) 22
B
C
10” - 12” (250mm - 300mm) 0.125 in. (3.2mm) 16 D
14” - 16” (350mm - 400mm) 0.188 in. (4.8mm) 11 A/2 F N.P.T.
A
Dimensional Data
Size A B C D E F
in. in. in. in. in. in. in. Weight Lb. (kg.)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Cover Unit
2” 14.88 20.00 12.00 6.63 28.00 1/ 50 195
2
50 378 508 305 168 711 15 23 89
3” 16.50 25.00 15.75 8.63 34.25 3/ 81 250
4
80 419 635 400 219 870 20 37 114
4” 18.63 26.00 15.88 8.63 36.13 1 81 300
100 473 660 403 219 918 25 37 136
5” 20.25 28.00 17.13 10.75 38.88 1 125 400
125 514 711 435 273 987 25 57 182
6” 24.50 30.75 19.13 10.75 42.38 1 125 480
150 622 781 486 273 10.76 25 57 218
8” 24.88 35.50 22.00 12.75 55.75 11/2 185 681
200 632 902 559 324 1416 40 84 310
10” 35.38 42.50 27.25 16.00 57.25 11/2 295 1100
250 899 1080 692 406 1454 40 134 500
12” 39.38 47.75 30.38 18.00 65.12 11/2 395 1650
300 1000 1213 772 457 1654 40 179 750
14” 41.50 52.50 33.00 20.00 72.00 2 505 2600
350 1054 1334 838 508 1829 50 229 1182
16” 47.50 60.00 38.88 24.00 81.13 2 790 2750
400 1207 1524 988 610 2061 50 358 1250
Notes: 1. Vents and differentials are optional.
2. Cover lifting lug standard on sizes 8” and larger.
3
CFS Series B600 Dimensional Data
Standard Screens
Size Range Opening Gauge Thickness
E
DISTANCE FOR
BASKET REMOVAL
2” - 8” (50mm - 200mm) 0.125 in. (3.2mm) 22
B
C
10” - 12” (250mm - 300mm) 0.125 in. (3.2mm) 16 D
14” - 16” (350mm - 400mm) 0.188 in. (4.8mm) 11 A/2 F N.P.T.
A
Dimensional Data
Size A B C D E F
in. in. in. in. in. in. in. Weight Lb. (kg.)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Cover Unit
2” 18.38 21.88 12.00 6.63 31.75 1/ 86 245
2
50 467 556 305 168 806 15 39 111
3” 23.88 26.50 15.75 8.63 37.25 3/ 140 360
4
80 606 673 400 219 946 20 64 164
4” 23.88 29.00 17.38 8.63 44.63 1 140 400
100 606 737 441 219 1133 25 64 182
5” 28.13 32.13 19.13 10.75 45.13 1 230 750
125 714 816 486 273 1146 25 105 341
6” 29.88 36.25 21.38 10.75 51.13 1 230 825
150 759 921 543 273 1299 25 105 375
8” 37.00 38.75 23.38 12.75 54.13 11/2 295 1200
200 940 984 594 324 1375 40 134 545
10” 42.50 47.25 27.25 16.00 68.25 11/2 495 1600
250 1080 1200 692 406 1708 40 225 727
12” 44.00 53.25 30.38 18.00 76.13 11/2 630 1800
300 1118 1353 772 457 1934 40 286 818
14” 46.00 60.00 35.13 20.00 84.88 2 810 3000
350 1168 1524 892 508 2156 50 367 1364
16” 54.00 70.00 42.25 24.00 97.75 2 1250 3200
400 1372 1778 1073 610 2483 50 567 1455
Notes: 1. Vents and differentials are optional. General:
2. Cover lifting lug standard on sizes 6” and larger. 1. For further optional features see pages 21-22. 3. For pressure loss information see page 25.
2. Other perforations and screen materials available. 4. For ordering information please see page 38.
Please see page 24. 5. Dimensions shown are subject to change.
Contact factory for certified prints when required.
4
How To Order
Size In. 8"
Strainer Type TC = Conical Temporary Strainer
TB = Basket Temporary Strainer
TP = Plate Temporary Strainer
Y = Y-Strainer
T = Tee Strainer
B = Basket Strainer
DB = Duplex Strainer
ANSI Pressure Class 125, 150, 300, 600, 900, 1500
Connection Type WFN = Wafer Flat Face (Smooth Finish)
WFS = Wafer Flat Face (Serrated Finish)
WRS = Wafer Raised Face (Serrated Finish)
WRTJ = Wafer Ring Joint
T = NPT Threaded
SW = Socket Weld
F = Flanged (RF or FF depending on standard of construction)
BW = Buttweld
RTJ = Ring Joint
G = Grooved
Body Material I = Cast Iron
* Other materials available upon request
S = Carbon Steel
SS4 = 304 Stainless Steel
SS6 = 316 Stainless Steel
LC = Low Temperature Carbon Steel
Cover Type B = Bolted Cover (Gasket Seal)
* Not applicable for temporary strainers BD = Bolted Cover (Gasket Seal) with Davit
H = Swing Bolt Hinged Cover (O-ring Seal)
Y = Yoke Cover (O-Ring Seal)
T = Quick-Opening Threaded Cover (O-ring Seal)
C = Quick-Opening C-Clamp Cover (O-Ring Seal)
G = Grooved
Construction Type W = Welded
C = Cast
Style TB, TC, TP Strainers
* Style 1 will be supplied 1 = Flow inside to outside
if style not specified 2 = Flow outside to inside
3 = Bi-directional flow
-100 = 100% open area
-150 = 150% open area
-200 = 200% open area
-300 = 300% open area
Y Strainers
1 = One style only
T Strainers
1 = Inline Flow
2 = 90 degree angle flow - one direction only
3 = 90 degree angle flow - bi-directional
B (Basket) Strainers
1 = Inline oversized body
2 = Offset oversized body
3 = Inline standard capacity body
4 = Offset standard capacity body
5 = Inline UL listed
DB (Duplex) Strainers
1 = Inline manifold construction
2 = Inline elbow construction
3 = Offset compact face to face
Specials / Other 1 = Non-standard screen
2 = Non-standard gasket
3 = Special external coating
4 = Special internal coating
5 = NACE MR01-75 Compliance
6 = Special N.D.E.
7 = Code stamped (CRN)
8 = Code stamped (U, UM)
9 = Other Special
A B C D E F G H I
