EPC PEMBANGUNAN MATERIAL HANDLING SYSTEM

SALAT BARU TELUK BETUNG - KALIMANTAN TENGAH

DATA SHEET - INSTRUMENTATION

PT. ASMIN BARA BRONANG COAL LEVEL SWITCH (LS) PT. TRUBA JAGA CITA

GENERAL
1 TAG Number See List Below Service Description See List Below
2 P & ID DWG Number SBTB-ABB-X4-DW-287
ENVIRONMENTAL DATA Minimum Normal Maximum
4 Process Type COAL HANDLING
5 Process State SOLID MATERIAL
6 Fluid Corrosive Substances N/A
7 Pressure kPa (g) N/A N/A N/A
8 Temperature deg C 20 25 40
9 Humidity % 30 60 90
10
COAL LEVEL SWITCH (LS) REQUIREMENT SPEC. or EQUIVALENT

11 Manufacturer THERMO RAMSEY

12 TYPE / Model / Serial No. MERCURY FREE TILT SENSOR PROBE, 21-54-NM-SS
13 CONTROL UNIT : 21-35-NM-F-ATEX
14 Degree of Protection NEMA 4X, IP66
15 Pobe Material STAINLESS STEEL
16 Switching Activation 15 deg. PROBE INCLINATION WITH SELECTABLE DELAY TIME
17 Number of Switch Points 2 EA - SPDT
18 Contact Rating 6A - 220VAC
19 Voltage Supply 230 Vac
20 Cable Entry Connection 2 x M20
21
22
23
ACCESSORIES
24 Installation Completeness All to be Included (Hanger & S Hook, etc)
25
26
NOTES

1 Manufacturer information catalogue attached

2
3
TAG No. INSTRUMENT SERVICE / LOCATION TAG No.
1 TC1- LS- 01H TRIPPER CAR - 1
2 TC2- LS- 01H TRIPPER CAR - 2
3 CB1- LS- 01H CONTAMINANT SILO BIN
4
5
6
7
8
9
10

09_COAL LEVEL SWITCH, Page : 1 OF 1

 weighing and monitoring

Prod uc t Spec i fi c a ti ons

Thermo Scientific Ramsey
Mercury-Free Tilt Sensors

Now available in a non-mercury

version, these sensors provide you
with the stability, sensitivity and
performance you have come to expect
from the traditional mercury-based
Thermo ScientificTM RamseyTM
Tilt Switches.

Features and Benefits

• Rugged, abrasion-resistant tilt probes
• Simple installation
• All probes include mounting hardware
• Solid-state control unit with printed
circuit boards
• Control unit is available in the
following options
- Field mount NEMA 4
- Field mount NEMA 4X
- DIN mount NEMA 1
• User adjustable time delay The Thermo ScientificTM RamseyTM Mercury- The field-mount control unit includes
Free Tilt Sensor uses advanced technology the traditional green “Normal” and red
to prevent false alarms
inside the tilt probe to replicate the same “Alarm” indicators with LED illuminators
• LED status lights — no bulbs
performance found in traditional mercury- (a DIN mount control is also available).
to change
based Thermo Scientific Ramsey Tilt The DPDT relay contacts give you two
• cCSAus and ATEX approved Switches. A combination of opto-electronics normally open and two normally closed
versions suitable for hazardous and solid state circuitry inside the probe connections for your external alarms and/or
area applications prevents jitter and provides stability not controls. An internal jumper allows you to
found in the typical non-mercury options. select whether “Normal” is a horizontal
or a tilted position. An adjustable time delay
The precision manufacturing of the tilt probe
inside the control prevents a momentary
provides sensing of a 15 degree inclination
tilting of the probe from causing a false
in a full 360 degrees of direction. Multiple
or premature contact transfer. Interruption
models of the tilt probe are available for
of line power will cause a contact transfer.
applications with a wide variety of materials
and environmental conditions (see inside
for a description of the available options).
All probes have fully encapsulated
electronics and come with the necessary
mounting hardware.
2 Ramsey Mercury-Free Tilt Sensor Controls
The sensor consists of a control unit and a tilt probe.
Due to the nature of the stabilizing electronics, tilt probes cannot be used without a controller.

Field Mount Control (SST IP65/NEMA 4X)

20-35-NM-F-4X
21-35-NM-F-CSA-4X

Field Mount Control (IP65/NEMA 4)

20-35-NM-F
21-35-NM-F-CSA DIN Mount Control (IP20/NEMA 1)
21-35-NM-F-ATEX 20-35-NM-DIN

Ramsey Mercury-Free Tilt Sensor Probes

Standard 1 in. Nickel Plated 1 in. Light Weight 1 in. Stainless Steel Probe 2 in. Heavy Weight Probe
Cast Ductile Iron Probe Plastic Probe 20-54-NM-SS 20-52-NM
20-59-NM 20-55-NM-P 21-54-NM-SS 21-52-NM
21-59-NM
 Tilt Sensor Probe Models 3

371.6 mm
(14.63 in) 427.9 mm
(16.85 in)
20-59-NM
20-54-NM-SS
209.6 mm 21-59-NM
260.4 mm 21-54-NM-SS
(8.25 in) (10.25 in)

63.5 mm 33.3 mm
(2.5 in) (1.3 in)
25.4 mm
(1.0 in)

337.6 mm 318.6 mm
(13.29 in) (12.54 in)
20-55-NM-P 20-52-NM
215.2 mm 188.1 mm 21-52-NM
(8.47 in) (7.41 in)

26.7 mm 33.3 mm
(1.05 in) (1.3 in)

Typical Industry Applications

High Level High Pile Low Level

Plugged Chute Material Flow

 Thermo Scientific Ramsey Mercury-Free Tilt Sensors
Tilt Sensor Probe General Specifications

Prod uc t Spec i fi c a ti ons

Temperature Rating All models -40°C (-40°F) to +50°C (+122°F)
Protection All models IP67 (NEMA 4x)
Mounting Hardware All models Hanger and two S-hooks included)
Certifications All models cCSAus, CE
Hazardous Area Certifications 21-59-N M / 21-54-NM / 21-52-NM ATEX Zone 20/21 and cCSAus Class I, Div 1 & 2, Groups A, B, C & D and
Class II, Div 1 & 2, Group E, F & G, CE
Tilt Sensor Probe General Specifications
Input Power All models 115/230 VAC, 50/60 HZ)
Alarm Contact Rating 20-35-NM-DIN (1) NO—2 Amp @ 115/230 VAC or 3 Amp @ 24 VDC
All other models (2) SPDT—6 Amp @ 115/230 VAC or 6 Amp @ 30 VDC non-inductive
Fault Contact Rating All models (1) NO—rated for 2 Amp @ 115/230 VAC@ 24 VDC
Time Delay All models 1, 2, 4, or 6 seconds selectable by jumpers
Temperature Rating All models -40°C (-40°F) to +50°C (+122°F)
Protection 20-35-NM-DIN IP20 (NEMA 1)
All other models IP65 (NEMA 4 or NEMA 4X)
Certifications All 20-35 models cCSAus, CE
Hazardous Area Certifications 21-35-NM-F-CSA / 21-35-NM-F-CSA-4X cCSAus Class I, Div 2, Groups A, B, C & D and Class II, Div 1 & 2 Group E, F & G, CE
21-35-NM-F-ATEX ATEX Zone 22, CE

DIN Mount Control Dimensions

112.0 mm (4.41 in)

119.0 mm 45.0 mm
(4.68 in) (1.77 in)
TILTED
FAULT

PROBE
FAULT

PROBE
TILTED

Field Mount Control Dimensions

158.8 mm (6.25 in)

101.6 mm (4.0 in) 2x 7.9 mm
(0.31 in)

Conduit Holes
(by Customer)
222.3 mm 135 mm
(8.75 in) (5.31 in)
(Type 4x)
122.2 mm 95.2 mm
(4.81 in) (3.75 in)
209.6 mm (Type 12, 4) 44.5 mm
(8.35 in) (1.75 in)

38.1 mm (1.50 in)

114.3 mm
(4.50 in)

Thermo Fisher Scientific,

Minneapolis, MN USA is ISO Certified.

thermoscientific.com/bulkweighing

© 2014 Thermo Fisher Scientific Inc. All rights reserved. Results may vary under different operating conditions. Specifications, terms and pricing
are subject to change. Not all products are available in all countries. Please consult your local sales representative for details.

Australia Chile India South Africa United States & Canada

+61 (0) 8 8208 8200 +56 (0) 2 378 5080 +91 (20) 6626 7000 +27 (0) 11-822-4120 +1 (800) 445-3503
+61 (0) 8 8234 3772 fax +56 (0) 2 370 1082 fax +91 (20) 6626 7001 fax +27 (0) 11-822-3982 fax +1 (763) 783-2525 fax
+1 (763) 783-2500 direct
Brazil China Italy Spain
+55-11-2367-2192 +86 (0) 80 0810 5118 +39 02-950590-55 +34 (0) 91-484-5965
+55-11-2367-2192 fax +86 (0) 21 6445 1101 fax +39 02-953200-15 fax +34 (0) 91-484-3597 fax
Germany Mexico United Kingdom
+49 (0) 208-824930 +52 (55) 1253 9410 +44 (14) 4241 3700
PI.8045.0814 +49 (0) 208-852310 fax +52 (55) 1253 9424 fax