GS10-B144-GF

(525 Wp - 550 Wp)

High Saving PID Resistance

Lower LCOE, reduced BOS cost, Excellent Anti-PID Performance guarantee
shorter payback time limited power degradation for mass production

High Efficiency
21.30% IP68 Junction Box
Excellent module conversion
High waterproof level
efficiency of up to 21.30%

Low-light Performance
Advanced glass and cell surface textured design
ensure excellent performance in low-light environment

INDUSTRY LEADING PROTECTION

12 Years Warranty For 30 Years Warranty For

12 Materials And Processing
30 Linear Power Output

ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 certified facility

 Grade Quality
BEST IN Class Results

TECHNICAL DATA MECHANICAL SPECIFICATION

Electrical Parameter at STC Bifacial Monocrystalline Module Solar cells 144 pcs Bifacial monocrystalline Silicon(PERC), Multi BB
Module Type GS10-B144-GF Encapsulation PID & UV resistance
Capacity rating – Pmax(Wp) 525 530 535 540 545 550 Frame Silver Anodized Aluminium Alloy
Power Tolerance (%) 0-2 0-2 0-2 0-2 0-2 0-2
Front Glass 2.0 mm, High Transmission, AR Coated Semi Tempered Glass
Module efficiency (%) 20.33 20.53 20.72 20.91 21.11 21.30
Back Glass 2.0 mm, Heat Strengthened Glass
Rated voltage - Vmp(V) 40.68 41.88 41.04 41.27 41.45 41.63
Dimensions (L) 2279 mm x (W) 1133 mm x (H) 35 mm”
Rated current - Imp(A) 12.91 12.96 13.03 13.10 13.16 13.22
Weight ~32 Kg
Open circuit voltage - Voc(V) 49.05 49.21 49.39 49.56 49.73 49.90
Short circuit current - Isc(A) 13.42 J-box IP 68 certified, 3 diodes, Split junction box
13.49 13.56 13.63 13.70 13.77
Under Standard Test Conditions (STC) of irradiance 1000 W/m², spectrum AM 1.5 and
Series Fuse Rating 25 A
module temperature of 25°C. Except Pmax, all other parameters have a tolerance of ±3%. Cable 4 mm², Solar cable 400mm/1400mm length or Customized length

Electrical Parameter at NMOT Connectors MC 4 Type

Capacity rating – Pmax(Wp) 389 392 396 400 403 407 Application Class Class A
Rated voltage - Vmp(V) 37.94 38.13 38.28 38.49 38.66 38.83 Electrical Safety Class II
Rated current - Imp(A) 10.24 10.28 10.34 10.39 10.44 10.49 Fire Safety Class C ( Type 1)
Open circuit voltage - Voc(V) 45.87 46.02 46.19 46.35 46.50 46.66 Surface load Snow load 5400 Pa, Wind load 2400 Pa
Short circuit current - Isc(A) 10.81 10.86 10.92 10.98 11.03 11.09
DRAWING (MEASUREMENTS ARE IN MM)
Irradiance 800 W/m2, ambient temperature 20°C, wind speed 1 m/sec
35 a'
35
24.5
Electrical Characteristics with 10% rear side power gain# a

Capacity rating – Pmax(Wp) 578 583 589 594 600 605

Rated voltage - Vmp(V) 40.68 41.88 41.04 41.27 41.45 41.63
Ø9*Ø14 mm
Rated current - Imp(A) 14.20 14.25 14.33 14.41 14.47 14.54 Mounting hole
Open circuit voltage - Voc(V) 49.05 49.21 49.39 49.56 49.73 49.90 8 Nos.

Short circuit current - Isc(A) 14.76 14.83 14.91 14.99 15.07 15.14
# Additional power gain from rear side compared to power of front side at STC depends on mounting
structure (height, tilt angle etc.) and reflectivity of ground.
Ø7*Ø10 mm
Bi-Faciality Factor : 70 ± 5 %
Mounting hole
4 Nos.

PERMISSIBLE OPERATING CONDITIONS 400±1 2279±2

J.B RFID J.B Back Label J.B
2279±2
990±1
Temperature range -40°C to + 85°C
1400±1
Maximum system voltage 1500 VDC
NMOT 45± 2°C b b'
Hail resistance Max. diameter of 25 mm with velocity 23 m/s

TEMPERATURE COEFFICIENTS (TC)

Temperature Coefficient (Voc) -0.25% /°C
Temperature Coefficient (Isc) Ø4 Earthing
0.050% /°C
4 Nos.
Temperature Coefficient (Pmax) -0.32% /°C
Ø3*10
PACKAGING CONFIGURATION## Drain hole
8 Nos.
Number of Modules per Pallet 31
1086±1
No of pallet 20 1133±2
No of module, 40ft HC container 620 Back view Side view
Ø7*Ø10mm Ø9*Ø14mm 9
mounting hole mounting hole
IV CURVE PV CURVE 7
16 600
2
35 35
Incident Irrad. = 1000 W/m 2
Incident Irrad. = 1000 W/m
14 2 14
500 Incident Irrad. = 800 W/m
12 Incident Irrad. = 600 W/m
2 10
Incident Irrad. = 800 W/m2 2
Incident Irrad. = 400 W/m
400 2
24.5 35
10 Incident Irrad. = 200 W/m
Power [W]
Current [A]

Incident Irrad. = 600 W/m2 a : a' b : b'

8 300
“Unspecified dimensions tolerance are according to ISO 2768-1, class m.”
2
6 Incident Irrad. = 400 W/m

4 Incident Irrad. = 200 W/m 2

200
PRODUCT CERTIFICATIONS
100
2
IEC 61215: 2016, IEC 61730: 2016, IS 14286:2010/IEC 61215:2005,
0 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Voltage [V] Voltage [V] IS/IEC 61730-1 & 2: 2004, CEC, IEC 61701, IEC 62716, IEC 60068-2-68
UL 61730-1 &2 , IEC 62804, IEC 61853
LINEAR GRAPH
I *
100% Power Degradation: <2% for First Year
TDS-GS10B144GF-V 4.4

98% <0.50% / Year in 2-30 Years * Testing is under progress

Guaranteed Power

MANAGEMENT SYSTEM CERTIFICATIONS

ISO 9001,
83.50% ISO 14001,
ISO 45001

1 5 10 15 20 25 30

UTILITY | INDUSTRIAL | AGRICULTURE | RESIDENTIAL

##
• Quantity of modules/container may get changed without prior notice.
• For handling & installation instructions, refer to Goldi's installation manual available on the company website
• Before placing an order, confirm your requirements with our sales representative 1800 833 5511
• The electrical data provided is for reference purposes only
• PV modules needs to be disposed as per goverment regulations, after it’s life cycle [email protected]
• Refer to Goldi's warranty document for terms and conditions
• Due to constant product modifications, Goldi reserves the right to amend the above specifications without prior notice goldisolar.com
• Images in the datasheet are for representation purpose only
 GS10-T144-GF
(575 Wp - 580 Wp)

High Saving PID Resistance

Lower LCOE, reduced BOS cost, Excellent Anti-PID Performance guarantee
shorter payback time limited power degradation for mass production

High Efficiency ↑ ↑
10-30% Additional Power Generation
22.45%
Excellent module conversion ↑ ↑
More than 10-30% additional power gain
efficiency of up to 22.45% comparing with the regular modules.

Better Weak Illumination Response Wider Applicability

Higher power output even under low-light More application scenes like BIPV, vertical
environments like on cloudy or foggy days installation, snowfield, high-humid, windy and dusty area

ZERO LID (Light Induced Degradation)

No-LeTID
No-LID N-Type Solar cell Technology
offers No-LeTID & No-LID

INDUSTRY LEADING PROTECTION

12 Years Warranty For 30 Years Warranty For

12 Materials And Processing
30 Linear Power Output

ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 certified facility

 Grade Quality
BEST IN Class Results

TECHNICAL DATA MECHANICAL SPECIFICATION

Electrical Parameter at STC Bifacial Monocrystalline Module
Solar cells 144 pcs TOPCon cell technology, Multi BB
Module Type GS10-T144-GF
Encapsulation PID & UV resistance
Capacity rating – Pmax(Wp) 575 580
Power Tolerance (%) 0~2 Frame Silver Anodized Aluminium Alloy
Module efficiency (%) 22.25 22.45 Solar Glass 2.0 mm, High Transmission, AR Coated HS Glass
Rated voltage - Vmp(V) 43.01 43.22 Dimensions (L) 2278 mm x (W) 1134 mm x (H) 30 mm”
Rated current - Imp(A) 13.37 13.42 Weight ~32.5 Kg
Open circuit voltage - Voc(V) 51.28 51.48 J-box IP 68 certified, 3 diodes, Split junction box
Short circuit current - Isc(A) 14.30 14.36 Series Fuse Rating 30 A
Cable 4 mm², Solar cable 1400 mm length or Customized length
Under Standard Test Conditions (STC) of irradiance 1000 W/m², spectrum AM 1.5 and
cell temperature of 25°C. Except Pmax, all other parameters have a tolerance of ±3%. Connectors MC 4 Type
Application Class Class A
Electrical Characteristics with 10% rear side power gain# Electrical Safety Class II
Capacity rating – Pmax(Wp) 633 638 Fire Safety Class C ( Type 1)
Rated voltage - Vmp(V) 43.01 43.22 Surface load Snow load 5400 Pa, Wind load 2400 Pa
Rated current - Imp(A) 14.70 14.76
Open circuit voltage - Voc(V) 51.28 51.48 DRAWING (MEASUREMENTS ARE IN MM)
Short circuit current - Isc(A) 15.73 15.79
30 30
a' 15
# Additional power gain from rear side compared to power of front side at STC depends on mounting
a
structure (height, tilt angle etc.) and reflectivity of ground.
Bi-Faciality Factor : 80 ± 5 %

PERMISSIBLE OPERATING CONDITIONS Ø9*Ø14 mm

Mounting hole
Temperature range -40°C to + 85°C 8 Nos.

Maximum system voltage 1500 VDC

NOCT 45± 2°C
Hail resistance Max. diameter of 25 mm with velocity 23 m/s Ø7*Ø10 mm
Mounting hole
4 Nos.
TEMPERATURE COEFFICIENTS (TC) 400
J.B RFID J.B Back Label J.B
1100 2278
2278
Temperature Coefficient (Voc) -0.25% /°C 1400
Temperature Coefficient (Isc) 0.045% /°C
Temperature Coefficient (Pmax) -0.30% /°C
b b'

PACKAGING CONFIGURATION##
Number of Modules per Pallet 36
Ø4 Earthing
No of pallet 20 4 Nos.
No of module, 40ft HC container 720
Ø3*10
Drain hole
8 Nos.

1095
IV CURVE PV CURVE 1134
Back view
700 Side view
Incident Irrad. = 1000 W/m2
16 Incident Irrad. = 800 W/m2
Incident Irrad. = 1000 W/m
2 600 Incident Irrad. = 600 W/m2
14 Incident Irrad. = 400 W/m2
Incident Irrad. = 200 W/m2 Ø7*Ø10mm Ø9*Ø14mm 9
500 Cells temp. = 25°C mounting hole
12 Incident Irrad. = 800 W/m2 mounting hole
Current (A)

400 7
30

10
30

Incident Irrad. = 600 W/m2

8
Power (W)

300
14
Incident Irrad. = 400 W/m2
6 10
200 15 30
4 Incident Irrad. = 200 W/m2 a : a' b : b'
100
2
0
“Tolerance for Length & width is of ±2mm & unspecified dimensions tolerance are according to ISO 2768-1, class m.”
0
10 20 30 40 50 60 0 10 20 30 40 50 60
0
Voltage（V） Voltage（V）

PRODUCT CERTIFICATIONS
LINEAR GRAPH
Standard Module Linear Performance Warranty
99.0% Goldi N-type Bifacial Double Glass Module
97.0% Linear Performance Warranty

89.4%
87.4 % MANAGEMENT SYSTEM CERTIFICATIONS
87.4% 1.00%
1st-year Degradation
TDS-GS10T144GF-V 1

ISO 9001,
80.0% 0.40% ISO 14001,
ISO 45001
Annual Degradation
0
1 5 10 15 20 25 30

Years

12 Years Product Material & Workmanship 30 Years Linear Performance Warranty

UTILITY | INDUSTRIAL | AGRICULTURE | RESIDENTIAL

##
• Quantity of modules/container may get changed without prior notice.
• For handling & installation instructions, refer to Goldi's installation manual available on the company website
• Before placing an order, confirm your requirements with our sales representative 1800 833 5511
• The electrical data provided is for reference purposes only
• PV modules needs to be disposed as per goverment regulations, after it’s life cycle [email protected]
• Refer to Goldi's warranty document for terms and conditions
• Due to constant product modifications, Goldi reserves the right to amend the above specifications without prior notice goldisolar.com
• Images in the datasheet are for representation purpose only