15/06/2025, 08:32 mikuni hsr 42mm w hat jet sizes above 4000 feet forced air k&n air
k&n air cleaner no baffles in exhaust v-tw in motor - Google Search
mikuni hsr 42mm what jet sizes above 4000 feet forced air k&n air cleaner n
AI Mode All Shopping Images Videos Short videos Web More Tools
AI Overview
For a Mikuni HSR42 carburetor on a V-twin motor at altitudes above 4000
feet, with a forced air intake (K&N filter, no baffles), you'll likely need to
increase both the main and pilot jet sizes compared to sea level settings.
Specific jet sizes will depend on the exact engine configuration and tuning
needs, but a good starting point would be a main jet in the range of 170-175
and a pilot jet around 25-30.
Jetting Considerations:
Altitude:
Higher altitude means less dense air, requiring a richer fuel mixture. For every 2,000
feet above sea level, you may need to increase the main jet size by approximately 2-
4 sizes, according to Mikunioz.
Forced Air/K&N Filter:
This setup provides more airflow than a stock setup, necessitating a richer mixture
to compensate.
No Baffles:
A less restrictive exhaust also increases airflow, requiring further jetting adjustments
to richen the mixture.
Engine Modifications:
If the engine has other modifications (cams, head work, etc.), those will also impact
jetting needs.
General Jetting Guidelines:
Main Jet:
Start with a main jet size of 170-175 and fine-tune based on plug readings and
throttle response.
Pilot Jet:
A pilot jet in the 25-30 range is a good starting point. A rich pilot jet will make
starting and idling easier.
Needle Jet and Needle:
Consider adjusting the needle clip position for fine-tuning the mid-range. Raising the
needle (moving the clip down) leans out the mixture in the mid-range.
Slide Cutaway:
A smaller slide cutaway (e.g., 2.5) can help prevent bogging on acceleration with a
free-flowing intake and exhaust.
Tuning Process:
1. Start Rich:
It's always better to start with a jetting that is slightly too rich than too lean.
2. Plug Readings:
Check the spark plugs after a good ride to determine the correct jetting. A dark,
sooty plug indicates a rich mixture, while a white, melted plug indicates a lean
mixture.
3. Throttle Response:
Pay attention to how the engine responds to throttle changes. If it hesitates or
sputters, it needs adjustment.
https://w w w .google.com/search?sca_esv=d572c6a4b45d64e1&rlz=1C1GCEA_en-GBUS1165US1165&q=mikuni+hsr+42mm+w hat+jet+sizes+abov… 1/5
15/06/2025, 08:32 mikuni hsr 42mm w hat jet sizes above 4000 feet forced air k&n air cleaner no baffles in exhaust v-tw in motor - Google Search
4. Professional Tuning:
If you are unsure about jetting or tuning, consult with a motorcycle mechanic or
carburetor specialist.
Important Notes:
Always use genuine Mikuni jets, according to Jets R Us, as they are flow-rated and
consistent.
Keep in mind that jetting can be affected by temperature and altitude changes, so
you may need to make adjustments periodically.
Mikuni HSR carburetors are designed for performance and may require more
frequent adjustments than stock carburetors.
By following these guidelines and carefully monitoring the engine's
performance, you can fine-tune the jetting for optimal performance at your
altitude and with your specific engine setup.
HSR Carburetors - Mikuni Power
Mikuni HSR Carburetors are designed for performance engine builders who need a
standalone carburetor for custom and race applicati...
Mikuni Power
Mikuni HSR42 Air-Filter Kit: Harley Davidson Shovelhead - Mikunioz
Description. This Mikuni HSR42 Air-filter kit suits all Harley Davidson Shovelhead
using stock crankcases where the top stud betwe...
Mikunioz
Dive deeper in AI Mode
AI responses may include mistakes. Learn more Export
ChopCult
https://forum.chopcult.com › forum › nbsp › 50834-mi...
mikuni hsr 42mm
Apr 28, 2019 — It came off a 96" big twin so I'll have to re jet for my bike which is a ported 1250. I'm gonna
open it up today and see what size jets are in ...
Missing: 4000 feet forced k&n baffles
People also ask
Are all Mikuni pilot jets the same?
What is a mikuni hsr?
Are Mikuni and Keihin jets interchangeable?
AI Overview
No, Mikuni and Keihin jets are generally not interchangeable . They have different
numbering schemes, thread sizes, and flow rates, even for the same nominal jet size. A
Keihin 100 jet is not the same as a Mikuni 100 jet; Keihin jets tend to have larger flow
rates for the same number.
Here's a more detailed explanation:
Numbering Schemes:
Mikuni and Keihin use different numbering systems for their jets, meaning the same number on a jet
from one brand doesn't guarantee the same flow rate as the other.
Thread Sizes:
https://w w w .google.com/search?sca_esv=d572c6a4b45d64e1&rlz=1C1GCEA_en-GBUS1165US1165&q=mikuni+hsr+42mm+w hat+jet+sizes+abov… 2/5
