Hx338+ Product Data Sheet
LIQ-PDS-Hx338+ Rev BA, October 2017
Rosemount™ Hx338+
Steam Sterilizable and Autoclavable Pre-Pressurized pH Sensor
A pre-pressurized sensor for high performance sanitary pH measurements
The maintenance-free Rosemount Hx338+ pH sensor is ideal for pharmaceutical, chemical, and biotechnology industry applications
where autoclaving, steam-in-place (SIP), and clean-in-place (CIP) procedures occur frequently.
Hx338+ October 2017
A robust sensor design
JJ Able to withstand autoclaving, steam-in-place, and clean-in-
place procedures.
JJ Maximum operating temperature up to 140 °C (284 °F).
JJ Maximum pressure up to 6 bar.
JJ Available in 120 mm (4.7 in.) insertion length.
JJ Pre-pressurized reference electrode prevents clogging of
diaphragm junction.
Ease of installation
JJ Eliminate cable twisting with Variopol (VP6) cable connection
for quick cable-to-sensor release.
Contents
Ordering information........����������������������������������������������������������������������������������������������������������������������������������������������������������������3
Specifications........����������������������������������������������������������������������������������������������������������������������������������������������������������������������������3
Dimensional drawings........���������������������������������������������������������������������������������������������������������������������������������������������������������������5
Accessories........�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������6
2 www.Emerson.com/RosemountLiquidAnalysis
October 2017 Hx338+
Ordering information
The Rosemount Hx338+ pH sensor features a pre-pressurized electrolyte and integral Pt-100
RTD for temperature compensation. These sensors come with a VP6 cable connection and are
compatible with VP8 mating cables. Variopol cables sold separately (see Accessories).
Table 1 -Rosemount Hx338+ pH Sensor Ordering Information
Model Sensor type
Hx338+ pH sensor
Sensor length
01 120 mm (4.7 in.)
Cable connection
72 Pt-100 RTD with Variopol (VP6) connector (requires accessory mating cable)
Typical model number: Hx338+-01-72
Specifications
Rosemount Hx338+ pH Sensor
Measuring method: Combination electrode; pH potential measured against reference electrode
Range: 0 to 14 pH
Sensitivity: 57 to 59 mV/pH at 25 °C (77 °F)
Wetted materials: Glass, EPDM (FDA Approved)
Operating temperature range: 0 to 140 °C (32 to 284 °F)
Pressure range: 0 to 6 bar
Minimum conductivity of sample: 100 µS/cm
Temperature sensor: Pt-100
Diameter: 12 mm (.5 in.)
Process connection: PG 13.5
Compatible transmitters: All Rosemount pH transmitters
Shelf life: Standard is 1 year from manufacturing date. Follow refresh procedure in Quick Start guide at 1 year and 18 months to
extend shelf life to a maximum of 2 years.
www.Emerson.com/RosemountLiquidAnalysis 3
Hx338+ October 2017
Insertion mounting assembly (PN 9160478)
Mechanical connection: G 1¼ in.
Total length: 133 mm (5.23 in.)
Maximum diameter: 50 mm (1.96 in.)
Materials of construction: 316L stainless steel/DIN 1.4435, FDA-EPDM (O-ring)
Surface finish: < 16 micro inch Ra
Temperature range: 0 to 135 °C (32 to 275 °F)
Maximum pressure: 6 bar (87 psi)
Insertion length: 48 mm (1.89 in.)
Compatible sensors: Hx338+ -01-72, all electrodes with PG 13.5 threads and 120 mm length
Mounting accessory needed for installation: PN 9160483 weld-in socket or other G 1¼ in. threaded socket
4 www.Emerson.com/RosemountLiquidAnalysis
October 2017 Hx338+
Dimensional drawings
Figure 1. Rosemount Hx338+ 120 mm
www.Emerson.com/RosemountLiquidAnalysis 5
Hx338+ October 2017
Figure 2. Weld-in socket PN 9160483
Accessories
Part number Description
24281-00 15 ft (4.6 m) cable with mating VP8 connector
24281-01 25 ft (7.6 m) cable with mating VP8 connector
24281-02 2.5 ft (.8 m) cable with mating VP8 connector
24281-05 4 ft (1.2 m) cable with mating VP8 connector
24281-06 10 ft (3 m) cable with mating VP8 connector
24281-07 20 ft (6 m) cable with mating VP8 connector
24281-08 30 ft (9.1 m) cable with mating VP8 connector
9160478 Insertion assembly, 48 mm insertion for 120 mm sensor, G 1¼ in.
9160483 15 degree weld-in socket, G 1¼ in. thread, 44 mm
9160484 Service kit for insertion mounting assembly
9210012 Buffer solution, pH 4.01, 16 oz
9210013 Buffer solution, pH 6.86, 16 oz
9210014 Buffer solution, pH 9.18, 16 oz
6 www.Emerson.com/RosemountLiquidAnalysis
October 2017 Hx338+
Notes
www.Emerson.com/RosemountLiquidAnalysis 7
Hx338+ Product Data Sheet
LIQ-PDS-Hx338+ October 2017
Global Headquarters
Emerson Automation Solutions
6021 Innovation Blvd.
Shakopee, MN 55379, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
[email protected]
North America Regional Office
Emerson Automation Solutions
8200 Market Blvd.
Chanhassen, MN 55317, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
[email protected]Latin America Regional Office
Emerson Automation Solutions
1300 Concord Terrace, Suite 400
Sunrise, FL 33323, USA
+1 954 846 5030
+1 952846 5121
[email protected]Europe Regional Office
Emerson Automation Solutions Europe GmbH
Neuhofstrasse 19a P.O. Box 1046
CH 6340 Baar Analyticexpert.com
Switzerland
+1 954 846 5030
+1 952846 5121 Linkedin.com/company/Emerson-Automation-Solutions
[email protected] Twitter.com/Rosemount_News
Asia Pacific Regional Office
Emerson Automation Solutions Asia Pacific Pte LTD
1 Pandan Crescent Facebook.com/Rosemount
Singapore 128461
+65 6777 8211
+65 6777 0947 Youtube.com/user/RosemountMeasurement
[email protected]Middle East and Africa Regional Office Google.com/+RosemountMeasurement
Emerson Automation Solutions
Emerson FZE P.O. Box 17033
Jebel Ali Free Zone - South 2 The Emerson logo is a trademark and service mark of Emerson Electric
+971 4 8118100 Co.
Rosemount and Rosemount logotype are trademarks of Emerson.
+971 4 88665465 All other marks are the property of their respective owners.
[email protected] © 2017 Emerson. All rights reserved.