Scribd
Upload
4 views11 pages

PDF Standard Static Mixers Brochure PDF Compress

Euromixers-Primix offers a range of static mixers and heat exchangers, available from stock for various mixing applications, including liquids and gases. The brochure details the construction materials, stock options, and selection guidelines for static mixers, emphasizing their cost-effectiveness and efficiency. For assistance with product selection, customers are encouraged to contact the company's application engineers.

Uploaded by

Shiloh Tony
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views11 pages

PDF Standard Static Mixers Brochure PDF Compress

Euromixers-Primix offers a range of static mixers and heat exchangers, available from stock for various mixing applications, including liquids and gases. The brochure details the construction materials, stock options, and selection guidelines for static mixers, emphasizing their cost-effectiveness and efficiency. For assistance with product selection, customers are encouraged to contact the company's application engineers.

Uploaded by

Shiloh Tony
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Brochure E-0500

1
Mixing Technology

Static mixers – Stock Range

Introduction
Euromixers-Primix design and manufacture static mixers and heat exchangers the most
popular sizes of static mixers are available from stock to meet urgent requirements.

Static mixers are a cost effective solution for a wide range of mixing applications, most
commonly, the fluids are liquid – however static mixers can also be used to mix gas
streams, disperse gas into liquid or disperse immiscible liquids.

Flow through the static mixer is diverted into two separate streams, spiral-shaped static
mixer elements create a rotation of the fluid, by which the fluid flows from the outside to
the inside of the tube then reverse.

After one rotation through a single static


mixer element a second diversion takes
place and simultaneously a reverse of the
previous rotation.

Stock - static mixer programme


The most popular static mixers can be built from stock components for r a p id d is p a t c h ,
products and technical specifications which fall within the scope of this programme can
be found in following pages.

Materials of construction – AISI 316L or PVC. Other materials available


available on request.

For water like products please refer to the static mixer selection chart at the back of this
brochure or if you need any help please contact our application engineers
2
Mixing Technology

WELDING END MIXER

WELDING DETAIL

Notes
Tolerances in accordance with ASTM A312
Welds are inspected with Dye Penetrant
Dimensions are subject to change without notice
3
Mixing Technology

DIN 2576 FLANGE MIXER

DIN 2633 FLANGE MIXER


4
Mixing Technology

ASTM 16.5 FLANGE MIXER

BSP (M) MIXER


Static mixer housing with BSP male
male
ends
5
Mixing Technology

BSP (F) MIXER

Static mixer housing with BSP female


ends

PVC WELDING END MIXER


6
Mixing Technology

PVC UNION JOINT MIXER

PVC FLANGE MIXER


7
Mixing Technology

PVC BSP (M)

PVC BSP (F)


8
Mixing Technology

PVC - 3D

PVC –3D mixer housings are supplied with a Joint face with o-ring groove on one end
PN10 (+GF+) and a Union end & bush on the opposite end.
9
Mixing Technology

STATIC MIXER - SELECTION CHART


The following table provides a guide for selecting a static mixer operating with water like
fluids.

The static mixer can be selected based on


• Flow and allowable pressure drop at the smallest static mixer size - Option 1
• Existing pipe sizes & allowable pressure drop at maximum flow - Option 2.

OPTION 1
1 – Select the total maximum flow
2 – Find the maximum allowable pressure drop at the smallest static mixer size
3 – Select the minimum number of mixer elements

OPTION 2
1 – Select the mixer pipe size
2 – Find the maximum allowable pressure drop at maximum flow
3 – Select the number of mixer elements.

Table 1 :
Pressure drop at theoretical 96% homogenous mixing with water like fluids
10
Mixing Technology

Table 1 :
Pressure drop at theoretical 96% homogenous mixing with water like fluids

Range of the most popular mixers

Example.

Select a static mixer size DN20 for 2m3 / hour at minimum pressure drop

1 – Select the table DN20


2 – Select 2m3 / hour
3 – Find the number of mixer elements at
the lowest pressure drop
4 – Three (3) mixer elements at 0.1 bar
creates a theoretical homogenous
mixture
5 – Selected static mixer PMS20-3

Please contact our application engineers we will be pleased to help.

Euromixers Limited
P.O. Box 94
Marple
Stockport Tel : + 44 (0) 161 449 8559
Cheshire Fax : + 44 (0) 161 426 0456
SK6-6WZ Email : [email protected]
United Kingdom Web : www.euromixers-primix.com

Whilst every effort is made to ensure the information on these pages is accurate, Euromixers Limited reserves
the right to change specification without notice, in keeping with our policy of continued product development.

You might also like