NO.
Command Name Format Notes
1 Location Check 123# or DW# OK
Charging; GPRS: Link Up; GSM Signal Level: Strong; GPS:
2 Status Check STATUS#
Fixed; ACC: ON; Defense: OFF;
3 Version Check VERSION# Version: ....
IMEI: 866551031234567; TIMER: 5, 5;
SENDS: 5; SOS: 8615618123456,,;
4 Parameter Check PARAM# CENTER:8615618123456;
Sensorset:10,1,3,1; Defense time: 10;
TimeZone: E,8,0
Current position! Lat: N31.384647, Lon:, E121.424740,
7 Lat. &Long. Check WHERE# Course: 142, Speed: 0,
DateTime: 2018-06-21 16:04:04
1. Domain setting:
9 Server setting SERVER,1,DOMAIN,PORT,0# OK
2. IP Setting: SERVER,0,IP,PORT,0# the last
"0" stands for: TCP
10 Server check SERVER#
11 Device Reboot RESET# The terminal will restart after 1 minute!
12 Add SOS Number SOS,A,Number1,Number2,Number3# OK! SOS 1: 8615618776551 SOS2: SOS3:
13 DeleteSOSNumber SOS,D,Number1,Number2,Number3#
14 Check SOS Number SOS#
14 Add Center Number CENTER,A,Center Number# The center number must be one of the sos number
16 Delete Center Number CENTER,D# OK!Center number: 15618776551
HBT,T1,T2#
T1=1~5m, ACC ON Time
Time Intervals of Heartbeat
17 Intervals of Heartbeat Upload OK
Setting
T2=1~5m, ACC OFF Time
Intervals of Heartbeat Upload
Query Time Intervals of
18 HBT# HBT:3,5;
Heartbeat Checking
TIMER,T1,T2#
Time Intervals Setting for T1=5~60s; Time Intervals of Upload When ACC
19 GPS Data Scheduled is ON. OK
Sending T2=5~60s; Time Intervals
of Upload When ACC is OFF.
Query Time Intervals
20 Checking for GPS Data TIMER# Timer:5,5;
Scheduled Sending
DEFENSE,A#
21 Delay Defense setting OK
A:1～60m,set delay defense time
22 Query delay defense setting DEFENSE# Sends, 5;
SENDS,A#
23 SENSOR CONTROL GPS OK
A=0-300 minutes 0standsforGPSalways on
24 QuerySENSOR ControlGPS SENDS#
RELAY,A#
25 Relay setting Cut off the fuel supply: Success! Speed: 0 km/h
A=0/1；0 power on,1 power off
ONLY CAN BE SET BY CENTER NUMBER
26 Query relay setting RELAY#
SENALM,A,M# A=ON
27 Vibration Alarm setting M=0～2；Alam method,0onlyPlatf ，1 OK
SMS+GPRS，2 GPRS+SMS+CALL ；
28 Turn off vibration alarm SENALM,OFF#
29 Query vibration setting SENALM# SENALM:OFF, 0
POWERALM,A,M,T1,T2,# A=ON
M=0～2；0GPRS，1 SMS
30 Power off alarm setting +GPRS，2 GPRS+SMS+CALL OK
T1=2～60s；Power off time
T2=1~300s；
31 Turn off power off alarm POWERALM,OFF#
32 Query power off alarm POWERALM# POWERALM: ON,0,5,30
BATALM,A,M# A=ON
33 Low battery alarm seetting M=0～1 OK
0GPRS，1SMS+GPRS，
34 Turn off low battery alarm BATALM,OFF#
35 Query low battery alarm BATALM# BATALML:ON,0
MOVING,A,R,M# A=ON
R=100～1000meter； moving radius M=0～2；
36 Moving alarm setting OK
0 GPRS，1 SMS
+GPRS；2 GPRS+SMS+CALL
37 Turn off moving alarm MOVING,OFF# OK
38 Query moving alarm MOVING# MOVING:OFF,100,0
SPEED,A,B,C,M# A=ON
B=5 ～600S；
39 Over Speed Alarm OK
C=1～255km/h； M=0～1；Alam methods，0
GPRS，1 SMS+GPRS；
40 Turn off overspeed alarm SPEED,OFF#
41 Query over speed alarm SPEED# SPEED,OFF,10,60,0#
APN,APN name#
42 APN Setting APN, CMMTM# APN,CMMTM,WAP,123456#
APN,APN name, admin, password#
MILESW,A#
43 Mileage switch setting A=1，Mileage on
A=0，Mileage off
