Nemko 10atex1053
Uploaded by
Hemelly PeronicoNemko 10atex1053
Uploaded by
Hemelly PeronicoPROD 021
[1] EC-TYPE EXAMINATION CERTIFICATE
[2] Equipment or Protected System Intended for use
in Potentially explosive atmospheres
Directive 94/9/EC
[3] EC-Type Examination Certificate Number: Nemko10ATEX1053X Issue 3
[4] Equipment or Protective System: Loudspeaker
[5] Applicant/ Manufacturer: DNH AS
[6] Address: Grueveien 2-6
3770 Kragerø
Norway
[7] This equipment or protective system and any acceptable variation thereto is specified in
the schedule to this certificate and the documents therein referred to.
[8] Nemko AS, notified body number 0470 in accordance with Article 9 of Council Directive
94/9/EC of 23 March 1994, certifies that this equipment or protective system has been
found to comply with the Essential Health and Safety requirements relating to the
design and construction of equipment and protective systems intended for use in
potentially explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential D0001529-rev 1
report no.
[9] Compliance with the Essential Health and Safety Requirements has been assured by
compliance with:
EN 60079-0: 2012, EN 60079-1: 2007, EN 60079-7: 2007 and EN 60079-18: 2009.
[10] If the sign “X” is placed after the certificate number, it indicates that the equipment or
protective system is subject to special conditions for safe use specified in the schedule
to this certificate.
[11] This EC-TYPE EXAMINATION CERTIFICATE relates only to the design, examination and
tests of the specified equipment or protective system in accordance to the directive
94/9/EC.
Further requirements of the Directive apply to the manufacturing process and supply of
this equipment or protective system. These are not covered by this certificate.
[12] The marking of the equipment or protective system shall include the following:
DSP-25EExmN/T II 2G Ex d e mb IIB+H2/IIC T5 Gb -50°C ≤ Ta +55°C
DSP-25EExmNC/T II 2G Ex d e mb IIB+H2/IIC T5 Gb -20°C ≤ Ta +40°C
Oslo, 2015-07-03
Arne Hortman
Certification Manager, Ex-products
Nemko Norway Page 1/3
Nemko AS, Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532 nemko.com/no
[13] Schedule
[14] EC-TYPE EXAMINATION CERTIFICATE No Nemko10ATEX1053X Issue 3
[15] Description of Equipment or Protective System
This Certificate covers a loudspeaker. T in the designation indicates design with transformer. C
indicates that Cabelec plastic is used for enclosure. For IIC sintered metal of stainless steel, type SIKA-
R 200 is used. For IIB +H2sintered metal of bronze, type SIKA-B 200 is used.
Type Designations / Technical Data
Type Marking Ambient temperature Freq. range
DSP-25EExmN(T) -50°C ≤ Ta ≤ +55°C 150 – 20000Hz
II 2G Ex d e mb IIB+H2 T5 Gb
DSP-25EExmN(T) -50°C ≤ Ta ≤ +55°C 150 – 20000Hz
II 2G Ex d e mb IIC T5 Gb
DSP-25EExmNC(T) -20°C ≤ Ta ≤ +40°C 150 – 20000Hz
Alternative plastic II 2G Ex d e mb IIB+H2 T5 Gb
enclosure
DSP-25EExmNC(T) -20°C ≤ Ta ≤ +40°C 150 – 20000Hz
Alternative plastic II 2G Ex d e mb IIC T5 Gb
enclosure
Voltage: 100V
Current: 250mA
Power: 25W
Variants: With encapsulated e-chamber and permanent cable (DSP-25EExmNMF(T).
With moulded monitoring card (DSP-25EExmMN(T).
Ingress Protection Code: IP67
[16] Report No. D0001529 – rev 1
Descriptive Documents
Name/Number Rev. Date Title/Description Sheets
2501 1 Feb 2015 DSP-25EExmN(T) Alternative models 1
2501 3 04.05.2015 DSP-25EExmNT 2
1188-A4-G G 04.05.2015 LMC170 Variant beskrivelser 1
Page 2/3
Certificate History and Associated Nemko Reports
Issue Date Report Description
0 2011-03-01 136852 Prime Certificate released
2011-06-06 174795 The descriptive documents are updated to include IECEx components
1
and standards
2 2013-04-18 230821 Dust marking removed.
3 2015-07-03 D0001529-rev 1 Issue 3. Modifications
• New compound for cemented joint around the magnet and
moulding.
• Update to EN 60079-0: 2012.
• Thermal fuses limits the temperature to 84°C.
• "Special conditions for safe use" is updated.
[17] Special Conditions for Safe Use
• The loudspeaker shall only be installed in areas where there is a low risk of impact.
• When the bracket of the loudspeaker is mounted onto the construction, the bracket must be connected to
earth potential through the construction.
[18] Essential Health and Safety Requirements
See item 9
Page 3/3
