Scribd
Upload
6 views

EC Declaration of Conformity

TK Elevator declares that the SYNERGY SMP GEN1 R2 lift, installed in Jeddah in 2022, meets the requirements of Directive 2014/33/EU and relevant standards. The lift has a rated load of 1000 kg, accommodates 13 passengers, and has undergone required checks and tests with no issues reported. The declaration includes details of the notified organizations involved in the conformity assessment process.

Uploaded by

Md Azaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

EC Declaration of Conformity

TK Elevator declares that the SYNERGY SMP GEN1 R2 lift, installed in Jeddah in 2022, meets the requirements of Directive 2014/33/EU and relevant standards. The lift has a rated load of 1000 kg, accommodates 13 passengers, and has undergone required checks and tests with no issues reported. The declaration includes details of the notified organizations involved in the conformity assessment process.

Uploaded by

Md Azaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TK Elevator

EU DECLARATION OF CONFORMITY

DECLARATION No.: 6080052856


INSTALLATION No.: L1 L2

Installer: TKE Saudi Arabia Fiscal Identification Code:


Address: DUCC-Ummlujj

DECLARES that the lift:


- Type or model: SYNERGY SMP GEN1 R2
- Rated load: 1000 kg. - No. passengers: 13
- Installation year: 2022 - No. stops: 3
- Installed at: JEDDAH
- City / Town: 11423 UMLUJ - Postcode:

fulfils, at the commissioning thereof, the requirements set for the applicable provisions of Directive 2014/33/EU about
governing lifts and with the applicable (*) provisions of transposition from the Directives, having been applied the
following rule: EN 12015;EN 12016;EN 12385-5;EN 13015;EN 81-20/50;EN 81-28:2018;EN 81-58;EN 81-77

That for the evaluation of the conformity of the elevator, the following procedure has been employed:
Subsection a) - Attachment IV
having taken part as Notified Organization(s): a) b) c) d)
IV) XI)
In the #EU” / #EC” type examination:
Company name: OCA ICP
Identification No.: 0058

In the unit verification:


Company name:
Identification No.:
I) II) III)
In the installer’s quality assurance system approval:
V) X) XII) VIII) XI)
Company name: AENOR 0099
Identification No.: 0099 AENOR

In the final check:


Company name:
Identification No.:

#EC” / #EU” type examination certificate number: 2800/6106/249931/010/rev.10


#EC” / #EU” design examination certificate number: Without certificate

FINAL TEST CERTIFICATE


That the elevator has undergone the required checks and tests, having passed all thereof, with no deformation or
damage having occurred which jeopardizes the use of the elevator as is stated on the Certificate.

In 20-Mar-25 , , , .

The Installer’s Officially Authorized Representative, Mr. Nadiem Ussaleh


(Installer’s Officially Authorized Representative’s Signature and Installer’s Seal)

(*) EEC Low-Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU, Directive
2006/42/EC on machinery.

You might also like