Scribd
Upload
4 views

Engine Oil Pump

The document provides specifications for the 3126B Engine Oil Pump used in Caterpillar-built machines, including detailed measurements and tolerances for various components. It includes illustrations of the pump gears and bypass valve. The publication is dated January 1, 2005, and was updated on January 28, 2005.

Uploaded by

Joel Dobbs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Engine Oil Pump

The document provides specifications for the 3126B Engine Oil Pump used in Caterpillar-built machines, including detailed measurements and tolerances for various components. It includes illustrations of the pump gears and bypass valve. The publication is dated January 1, 2005, and was updated on January 28, 2005.

Uploaded by

Joel Dobbs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1 of 2

Shutdown SIS

Previous Screen

Product: NO EQUIPMENT SELECTED


Model: NO EQUIPMENT SELECTED
Configuration: NO EQUIPMENT SELECTED

Specifications
3126B Engine for Caterpillar Built Machines
Media Number -SENR9579-05 Publication Date -01/01/2005 Date Updated -28/01/2005

i04845483

Engine Oil Pump


SMCS - 1304

Illustration 1 g02976198
Section view through pump gears
Typical example
Page 2 of 2

Illustration 2 g02976196
The section view is of the bypass valve that is located in the pump assembly.

Table 1
Specification for 189-8777 Engine Oil Pump Gp
Item Qty Part Specification Description
Distance between the front face of the gear and the housing is
A - -
43.00 ± 0.25 mm (1.693 ± 0.010 inch).
Length of the gear is 33.00 ± 0.03 mm (1.299 ± 0.001 inch).
B - - Depth of the bore for the gear is 33.13 ± 0.02 mm
(1.304 ± 0.001 inch).
Diameter of the gear shaft is 15.600 ± 0.005 mm
(0.6142 ± 0.0002 inch).
C - -
Bores in the pump bodies for the gear shaft is 15.641 ± 0.008 mm
(0.6158 ± 0.0003 inch)
Length under test force is 54.5 mm (2.15 inch).
105-1805
1 1 Test force is 51.99 ± 1.90 N (11.69 ± 0.43 lb).
Spring
Free length after test is 64.98 mm (2.558 inch).
Diameter of the plunger is 17.000 ± 0.013 mm
Relief valve (0.6693 ± 0.0005 inch).
2 1
plunger Bore in the pump body for the plunger is 17.100 ± 0.025 mm
(0.6732 ± 0.0010 inch).

Copyright 1993 - 2020 Caterpillar Inc. Wed Apr 1 20:49:55 UTC+0300 2020
All Rights Reserved.
Private Network For SIS Licensees.

You might also like