Scribd
Upload
14 views1 page

OP1820FA3

OPELENE OP1820FA3 is a pelletized linear low density polyethylene designed for applications requiring excellent drawdown and toughness, suitable for both blown and cast film extrusion. It is commercially active in North America and can be used for various flexible and rigid packaging applications. The material features high antioxidant levels and offers specific physical properties such as tensile strength and elongation, as well as impact and tear strength.

Uploaded by

AthonioMourinho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views1 page

OP1820FA3

OPELENE OP1820FA3 is a pelletized linear low density polyethylene designed for applications requiring excellent drawdown and toughness, suitable for both blown and cast film extrusion. It is commercially active in North America and can be used for various flexible and rigid packaging applications. The material features high antioxidant levels and offers specific physical properties such as tensile strength and elongation, as well as impact and tear strength.

Uploaded by

AthonioMourinho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

OP1820FA3

Linear Low Density Polyethylene (LLDPE)


Description:
OPELENE OP1820FA3 is a pelletized linear low density polyethylene selected for applications
that require excellent drawdown and toughness. These resins offer excellent additive
homogeneity, require no transfer equipment modification and facilitate clean and safe
storage and handling. They can be used in either blown or cast film extrusion. OP1820FA3 is
formulated with higher antioxidant levels for use in cast film.
General:
Material Status  Commercial: Active

 North America
Availability

 Bags & Pouches; Can Liners; Color Concentrates; Food
Application Packaging Film; Lamination Film; Liner film; Stretch Wrap
Film
 Flexible Packaging;
Uses
Compounding; Rigid Packaging
Processing Method  Blown Film
ASTM & ISO Properties
Physical Nominal Value Unit Test Method
Base Resin Density (23 C) 0.918 g/cm3 ASTM D1505
Product Density (23 C) 0.918 g/cm3 ASTMD1505
Melt Mass-Flow Rate (190 C/2.16kg) 2.0 g/10 min ASTM D1238
Film Nominal Value Unit Test Method
Tensile Strength - MD (Break) 4900 psi ASTM D882
Tensile Strength - TD (Break) 3600 psi ASTM D882
Tensile Elongation - MD (Break) 750 % ASTM D882
Tensile Elongation - TD (Break) 800 % ASTM D882
Dart Drop Impact Strength, F50 120 g ASTM D1709
Elmedorf Tear Strength - MD 170 g ASTM D1922
Elmedorf Tear Strength - TD 400 g ASTM D1922
1% Scant Modulus - MD 32000 psi ASTM D1922
1% Scant Modulus - TD 36000 psi ASTM D1922
Additive Nominal Value Unit Test Method
Slip None None
Antiblock None None
Notes:
Typical properties: these are not to be construed as
specifications

Distributed by

Opec Plastics Joint Stock Company


13th Floor, BIDV Tower, 194 Tran Quang Khai St., Hoan Kiem Dist., Hanoi, Vietnam
Tel: +84 24 730 68868 Fax: +84 24 3795 1071 http://www.opec.vn

You might also like