Scribd
Upload
2 views1 page

Cn Labasg4 Sp25

The assignment requires students to configure OSPF on a previously designed network topology and verify routing functionality. Students must enable OSPF on all routers, establish neighbor relationships, and document learned routes. Submission includes a demo and a report with screenshots and ping confirmations.

Uploaded by

fakhr5249
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views1 page

Cn Labasg4 Sp25

The assignment requires students to configure OSPF on a previously designed network topology and verify routing functionality. Students must enable OSPF on all routers, establish neighbor relationships, and document learned routes. Submission includes a demo and a report with screenshots and ping confirmations.

Uploaded by

fakhr5249
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

COMSATS University Islamabad, Attock Campus

Department of Computer Science


Program: BSE
Lab Assignment 4
Course: - Computer Networks
Deadline: May 23, 2025 Marks: 10

Configure OSPF on the topology you designed in Assignment 3. After successful configuration,
verify that routing is working by checking learned routes.

Task Instructions:

1. Use the existing topology you built in Assignment 3 (reuse the same IP addressing).
2. Enable OSPF Routing on all routers:
o Choose a consistent process ID (e.g., 1).
o Use the appropriate network commands to assign interfaces to OSPF.
o Ensure that all routers form OSPF neighbor relationships.
3. Verify OSPF configuration using the following commands on each router:
o show ip route
o show ip ospf neighbor
o show ip ospf interface brief
4. Ping all end devices from each router to confirm end-to-end connectivity.
5. Document the number of OSPF-learned routes on each router:
o Highlight routes marked with O in the routing table.

Submission Requirements:

Demo + A short report including:

o Screenshots of the show ip route output on all routers.


o Confirmation of successful pings between devices.

You might also like