Climate Control for

Regulating & Heating &

Ventilating & Lighting & Fan

WENZHOU NATURAL
AUTOMATION EQUIPMENT
CO., LTD.
www.china-natural.com
Climate Control for
Regulating & Heating & Ventilating & Lighting & Fan
Wenzhou Natural Automation Equipment Co., Ltd. is specialized in R & D, Manufacturing, Marketing and Sales
services for Thermostat, Hygrostat, Heater, Cabinet Fan Filter, Waterproof Boxes and Cabinet Accessories.

Our produsts can be used in the field of Electrical and Electronics, Telecommunications, Wind Energy, Solar
Energy, Rail Transportation and Car Manufacturing, Power Station and Outdoor Factories, Parking Control
Systems. We have provided OEM, ODM services for 13 years all over the world.

We have got ISO9001: 2008 certification, our products have got CE, RoHS, Patent, In order to offer the best
quality products to our customers, all our products are made of fireproof material, and inside contact are silver,
not copper. Another, all our products should pass the half-finished 100% testing and finished 100% testing
before delivery. For double guarantee, we use point key controlling during producing process, which monitor
quality on time. Which can keep the fault rate of our products is controlled within 1/1000.

Wenzhou Natural always adhere to the management philosophy of "People-oriented, Science and Technology
enterprises", the broad masses of users to absorb the views and requirements from the users and provide a
complete system solutions for "Cabinet Control Environment", praised by the majority of users widely.

Offer High-Class quality products and good service is our target. Build long term business with our customer is
our final content. Welcome your cooperation with us in the future.

Sincerely welcome worldwide friends to visit our factory and negotiate business, we will be happy to serve you!
 Regulating
Thermostat, Hygrostat

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD.
www.china-natural.com
 Small Compact Thermostat

NTL 10A-F / NTL 10B-F • Large setting range

NTL 10A-M / NTL 10B-M • Small size
• Simple to mount
• High switching performance

NTL 10A-F / NTL 10A-M: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens
when temperature is rising.

NTL 10B-F / NTL 10B-M: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers
or for switching signal devises when temperature limit has been exceeded. The contact closes when temperature is
rising.

Technical Data
NTL 10A-F / NTL 10B-F / NTL 10A-M / NTL 10B-M
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life >100,000 cycles
Max. switching capacity 250VAC, 10 (2) A / 120VAC, 15 (2) A
F Type M Type DC 30W at 24VDC to 72VDC

33
Max. inrush current AC 16A for 10 sec.
Connection 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm

43
Weight approx. 40g
Fitting position variable

30
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
20 40
10 50 Operating/Storage humidity max. 90% RH (non-condensing)
0 60 °C
Protection type IP20
60

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Connection diagrams
Regulating

Examples of connection
Thermostat Thermostat
NTL 10A (NC) NTL 10B (NO)
Thermostat Heater Thermostat e.g. Fan Thermostat e.g. Signal device
NTL 10A-F (NC) NTL 10B-F (NO) NTL 10B-F (NO)

A1
30 30 30
20 40 20 40 20 40
10 50 10 50 10 50
0 60 °C 0 60 °C 0 60 °C

LN

Fast Fixing Type (F Type) Manual Up down Type (M Type)

Setting range
NTL 10A-F (NC Type) NTL 10B-F (NO Type) NTL 10A-M (NC Type) NTL 10B-M (NO Type)
Heater 860001 860006 860610 860615 0 to +60°C
860002 860007 860611 860616 -10 to +50°C
Filter fan, Cooling equipment, Signal device
860003 860008 860612 860617 +20 to +80°C
860004 860009 860613 860618 +32 to +140°F
860005 860010 860614 860619 +14 to +122°F
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Small Compact Thermostat

DMO 1140-F / DMS 1141-F • Large setting range

DMO 1140-M / DMS 1141-M • Small size
• Simple to mount
• High switching performance

DMO 1140-F: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when
temperature is rising.

DMS 1141-F: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for
switching signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.

Technical Data
DMO 1140-F / DMS 1141-F / DMO 1140-M / DMS 1141-M
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life >100,000 cycles
Max. switching capacity 250VAC, 10 (2) A / 120VAC, 15 (2) A
F Type M Type DC 30W at 24VDC to 72VDC
Max. inrush current AC 16A for 10 sec.
33

Connection 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
43 Weight approx. 40g
Fitting position variable

20
30
40
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
10 50
Operating/Storage humidity max. 90% RH (non-condensing)
0 °C 60

Protection type IP20

60

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Connection diagrams

Regulating
Examples of connection
Thermostat Thermostat
DMO 1140 (NC) DMS 1141 (NO)
Thermostat Heater Thermostat e.g. Fan Thermostat e.g. Signal device
DMO 1140-F (NC) DMS 1141-F (NO) DMS 1141-F (NO)

A2
30 30 30
20 40 20 40 20 40

10 50 10 50 10 50

0 °C 60 0 °C 60 0 °C 60

LN

Fast Fixing Type (F Type) Manual Up down Type (M Type)

Setting range
DMO 1140-F (NC Type) DMS 1141-F (NO Type) DMO 1140-M (NC Type) DMS 1141-M (NO Type)
Heater 860011 860016 860620 860625 0 to +60°C
860012 860017 860621 860626 -10 to +50°C
Filter fan, Cooling equipment, Signal device
860013 860018 860622 860627 +20 to +80°C
860014 860019 860623 860628 +32 to +140°F
860015 860020 860624 860629 +14 to +122°F
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Small Compact Thermostat

NT 31-F / NT 32-F • Large setting range

NT 31-M / NT 32-M • Small size
• Simple to mount
• High switching performance

NT 31-F: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature
is rising.

NT 32-F: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching
signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.

Technical Data
NT 31-F / NT 32-F / NT 31-M / NT 32-M
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life >100,000 cycles
Max. switching capacity 250VAC, 10 (2) A / 120VAC, 15 (2) A
F Type M Type DC 30W at 24VDC to 72VDC
Max. inrush current AC 16A for 10 sec.
33
Connection 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
Weight approx. 40g
43 Fitting position variable
Operating/Storage temperature -45 to +80°C (-49 to +176°F)

20
30
40
Operating/Storage humidity max. 90% RH (non-condensing)
10 50
Protection type IP20
0 60

°C
60

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
Regulating

Examples of connection
Connection diagrams
Thermostat Heater Thermostat e.g. Fan Thermostat e.g. Signal device
Thermostat Thermostat
NT 31-F (NC) NT 32-F (NO) NT 32-F (NO)
NT 31 (NC) NT 32 (NO)

A3 20

10

0
30

60
40

50
20

10

0
30

60
40

50
20

10

0
30

60
40

50

°C °C °C

LN

Fast Fixing Type (F Type) Manual Up down Type (M Type)

Setting range
NT31-F (NC Type) NT32-F (NO Type) NT31-M (NC Type) NT32-M (NO Type)
860021 860026 860630 860635 0 to +60°C
Heater 860022 860027 860631 860636 -10 to +50°C
860023 860028 860632 860637 +20 to +80°C
Filter fan, Cooling equipment, Signal device 860024 860029 860633 860638 +32 to +140°F
860025 860030 860634 860639 +14 to +122°F
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Small Compact Thermostat

NT 33-F / NT 34-F • Large setting range

NT 33-M / NT 34-M • Small size
• Simple to mount
• High switching performance

NT 33-F: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature
is rising.

NT 34-F: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching
signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.

Technical Data
NT 33-F / NT 34-F / NT 33-M / NT 34-M
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life >100,000 cycles
Max. switching capacity 250VAC, 10 (2) A / 120VAC, 15 (2) A
F Type M Type DC 30W at 24VDC to 72VDC
Max. inrush current AC 16A for 10 sec.
33 Connection 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
Weight approx. 40g
43 Fitting position variable
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
20
30
40 Operating/Storage humidity max. 90% RH (non-condensing)
10

0 60
50

°C
Protection type IP20
60

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Regulating
Examples of connection
Connection diagrams
Thermostat Heater Thermostat e.g. Fan Thermostat e.g. Signal device
Thermostat Thermostat
NT 33-F (NC) NT 34-F (NO) NT 34-F (NO)
NT 33 (NC) NT 34 (NO)

A4
30 30 30
20 40 20 40 20 40

10 50 10 50 10 50

0 60 °C 0 60 °C 0 60 °C

LN

Fast Fixing Type (F Type) Manual Up down Type (M Type)

Setting range
NT33-F (NC Type) NT34-F (NO Type) NT33-M (NC Type) NT34-M (NO Type)
860031 860036 860640 860645 0 to +60°C
Heater 860032 860037 860641 860646 -10 to +50°C
860033 860038 860642 860647 +20 to +80°C
Filter fan, Cooling equipment, Signal device 860034 860039 860643 860648 +32 to +140°F
860035 860040 860644 860649 +14 to +122°F
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Dual Thermostat

NT 71-F • NO and NC in one casing

• Separate adjustable temperatures
• High switching capacity
• Terminals easily accessible
• Clip fixing

Two thermostats in one casing:

Thermostat (contact breaker, normally closed) for regulating heaters. The contact opens when temperature is rising.
Thermostat (contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices
when temperature limit has been exceeded. The contact closes when temperature is rising.
Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to
the usual change-over contacts.

Technical Data
NT 71-F
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life >100,000 cycles
Max. switching capacity 250VAC, 10 (2) A
Max. inrush current AC 16A for 10 sec.
50 Connection 4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 46mm
46 Weight approx. 90g
Fitting position variable
20
30
40 20
30
40
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
10 50 10 50

Operating/Storage humidity max. 90% RH (non-condensing)

0 60 0 60

°C
67

Protection type IP20

¹ When connecting with wires, wire end ferrules must be used.

11 12 23 24
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
Connection diagrams
Regulating

Thermostat NT 71 (NC/NO) Examples of connection

Heater Thermostat NT 71-F Filter fan

30 30

A5
20 40 20 40

10 50 10 50

0 60 0 60

°C

11 12 23 24

Art. No. Setting range Setting range

860041 Contact breaker (NC) 0 to +60°C Contact maker (NO) 0 to +60°C

Heater 860042 Contact breaker (NC) +32 to 140°F Contact maker (NO) +32 to 140°F
860043 Contact breaker (NC) -10 to +50°C Contact maker (NO) +20 to +80°C
Filter fan, Cooling equipment, Signal device 860044 Contact breaker (NC) +14 to 122°F Contact maker (NO) +68 to +176°F
860045 Contact maker (NO) 0 to +60°C Contact maker (NO) 0 to +60°C
860046 Contact maker (NO) +32 to 140°F Contact maker (NO) +32 to 140°F
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electronic Thermostat

NT 72-F > High DC breaking capacity

> Low hysteresis
> Adjustable temperature
> Change-over contact
> Clip fixing

Electronic thermostat for regulating high performance 24VDC equipment. Heating or cooling appliances as well as
signal devices can be switched via the potential free change-over contact. In comparison to mechanical thermostats,
the NT 72 has a low hysteresis making the switching point and setting accuracy more precise.

Technical Data
NT 72-F
Switch temperature difference approx. 3K
Sensor element PTC
Contact type change-over
Service life change-over
Max. switching capacity 28VDC, 16A
Max. inrush current DC 16A
Connection 5-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
46

Mounting clip for 35mm DIN rail, EN 60715

Casing plastic according to UL94 V-0, light grey
50 Dimensions 67 x 50 x 46mm
Weight approx. 80g
30
20

10
40

50
Fitting position vertical
0

Operating/Storage temperature -10 to +60°C (+14 to +140°F) / -45 to +80°C (-49 to +176°F)
°C 60
67

Operating/Storage humidity max. 90% RH (non-condensing)

Protection type IP20

¹ When connecting with stranded wires, wire end ferrules must be used.

Connection diagrams Examples of connection

Thermostat Heater NTL 150 Thermostat e.g. Filter fan Thermostat e.g.
NT 72-F NT 72-F for cooling NT 72-F Signal device

Regulating
30 30 30
20 40 20 40 20 40

10 50 10 50 10 50

0 0 0
°C 60 °C 60 °C 60

LN
A6

Heater
Art. No. Setting Range Operating Voltage
Filter fan, Cooling equipment, Signal device 72190.0-00 0 to +60°C 24VDC (20-28VDC)

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Switch Module

NT 73-F • High DC switching capacity

• Variety of applications
• Compact design
• Simple connection
• Clip fixing

The Switch Module is designed for switching DC equipment with high currents. It is controlled via an external, potential-
free contact (thermostat or hygrostat) connected between terminals 1 and 2. For switching the Module, the internally
generated signal current has to be used. It must ne ensured that the external contact can safely switch this signal
current. The NT 73-F is available in 24VDC and 48VDC versions.

Technical Data
NT 73-F
Contact type contact maker normally open (Relay/MOSFET)
Service life >100,000 cycles
Max. inrush current DC 16A
Connection 6-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715

50
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 46mm
Weight approx. 90g
Fitting position variable
Operating/Storage temperature -45 to +70°C (-49 to +158°F)

46 Operating/Storage humidity max. 90% RH (non-condensing)

Protection type IP20

¹ When connecting with stranded wires, wire end ferrules must be used.
67

Examples of connection
Us

DC48V - + 1 2 - + DC48V Load, e.g. heater, Switch module Control contact,

cooling device NT 73-F e.g. thermostat
Connection diagrams
Regulating

30
20 40
10 50
0 60 °C

Us

DC48V - + 1 2 - + DC48V
LN
A7

Control
contact Art. No. Max. switching capacity Signal current Operating Voltage
860047 28VDC, 16A 13mA at 20VDC / 22mA at 28VDC 24VDC (20-28VDC)
Load Power supply
860048 56VDC, 16A 10mA at 38VDC / 18mA at 56VDC 48VDC (38-56VDC)
Heater

Filter fan, Cooling equipment, Signal device

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Mechanical Hygrostat

MFR 012 > Adjustable relative humidity

> Change-over contact
> High switching capacity
> Easily accessible terminals
> Clip fixing

The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical
relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic
components is effectively prevented.

Technical Data
MFR 012
Switch difference¹ +/-5% RH
Permissible air velocity 15m/sec.
Contact type change-over contact
Service life > 50,000 cycles
Min. switching capacity 20VAC / DC 100mA
Max. switching capacity 250VAC, 5A / DC 20W
Connection 3-pole terminal for 2.5mm², clamping torque 0.5Nm max.:
rigid wire 2.5mm² (AWG 14); stranded wire² 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
38

Casing plastic according to UL94 V-0, light grey

Dimensions 67 x 50 x 38mm
50
Weight approx. 60g
Fitting position variable
Operating/Storage temperature 0 to +60°C (+32 to +140°F) / -40 to +60°C (-40 to +140°F)
Operating/Storage humidity max. 95% RH (non-condensing)
67

Protection type IP20

¹ at 50% RH
² When connecting with stranded wires, wire end ferrules must be used.

Connection diagrams Examples of connection

Heater Hygrostat Hygrostat e.g. Filter fan

MFR 012 MFR 012
Regulating

A15

Art. No. Setting Range Operating Voltage

Heater 01220.0-00 35 to 95% RH 20VAC/DC, 250VAC

Filter fan, Cooling equipment, Signal device

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Mechanical Hygrostat

NT 74-F • Adjustable relative humidity

• Change-over contact
• High switching capacity
• Easily accessible terminals
• Clip fixing

The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical
relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic
components is effectively prevented.

Technical Data
NT 74-F
Switch difference¹ +/-5% RH
Permissible air velocity 15m/sec.
Contact type change-over contact
Service life >50,000 cycles
Min. switching capacity 20VAC / DC 100mA
Max. switching capacity 250VAC, 5A / DC 20W
Connection 3-pole terminal for 2.5mm², clamping torque 0.5Nm max.:
50
rigid wire 2.5mm² (AWG 14); stranded wire² 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 38mm
38 Weight approx. 60g
Fitting position variable
Operating/Storage temperature 0 to +60°C (+32 to +140°F) / -40 to +60°C (-40 to +140°F)
Operating/Storage humidity max. 95% RH (non-condensing)
67

Protection type IP20

¹ at 50% RH
² When connecting with stranded wires, wire end ferrules must be used.

Connection diagrams Examples of connection

Regulating
Heater Hygrostat Hygrostat e.g. Filter fan
NT 74-F NT 74-F

A8
LN

Art. No. Setting Range Operating Voltage

Heater 860049 35 to 95% RH 20VAC/DC, 250VAC

Filter fan, Cooling equipment, Signal device

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electronic Thermostat

NT 75-F • Adjustable temperature

• High switching capacity
• Small hysteresis
• Change-over contact
• Clip fixing

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The
thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.
Functionality: The temperature setting on the scale equals to the upper switch point, which means that the NC contact
opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point,
which means that the NC contact closes.

Technical Data
NT 75-F
Switch temperature difference 5K (-3/+2K tolerance)¹
Sensor element NTC
Contact type change-over snap-action contact
Service life >100,000 cycles
Min. switching capacity 10mA
Max. switching capacity NC: 250VAC, 10 (4) A
NO: 250VAC, 5 (2) A
50 Max. inrush current AC 16A for 10 sec.
Connection 4-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded² wire 2.5mm² (AWG 14)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
38
Dimensions 67 x 50 x 38mm
Weight approx. 60g
20

Fitting position variable

10 30
0 40
-10 50
-20 60

Operating/Storage temperature -20 to +60°C (-4 to +140°F)

°C
67

Operating/Storage humidity max. 90% RH (non-condensing)

Protection type IP20

¹ If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal
"N" (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be
determined for each individual application.
Regulating

Connection diagrams ² When connecting with wires, wire end ferrules must be used.

Examples of connection

Heater Thermostat e.g. Filter fan Thermostat e.g. Thermostat

A9 NT 75-F for cooling NT 75-F Signal device NT 75-F

20 20 20
10 30 10 30 10 30
0 40 0 40 0 40
-10 50 -10 50 -10 50
-20 60 -20 60 -20 60

°C °C °C

LN

Art. No. Contact breaker (NC) Setting Range Operating Voltage

Heater
860050 -20 to +60°C 230VAC, 50/60Hz

Filter fan, Cooling equipment, Signal device

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electronic Thermostat

NTL 76-M (NTL 76) • Small hysteresis

• Status indicator (LED)
• Change-over contact
• Clip fxing

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The
thermostat registers the surrounding air and can switch both and inductive and resistive loads via relay with changeover
contact. The LED integrated in the adjustment knob is lit when the NC is closed. (e.g. when a connected heater is
operating).

Technical Data
NTL 76-M (NTL 76)
Switch temperature difference 4K (± 1K tolerance) at +20°C (+68°F)¹
Sensor element NTC
Reaction time approx. 5 sec.
Contact type change-over contact (relay)
Service life > 50,000 cycles
Max. switching capacity (relay output) 240VAC / 120VAC, 8 (1.6) A
Max. inrush current AC 16A for 10 sec.
42.5
Optical indicator LED
Connection 5-pole terminal, clamping torque 0.5Nm max.: rigid/stranded wire 2.5mm²
(AWG 14)
38

Mounting clip for 35mm DIN rail, EN 60715

Casing plastic according to UL 94V-0, light grey
Dimensions 64.5 x 42.5 x 38mm
30
Weight approx. 70g
20 40

10

0
50
Fitting position vertical
°C 60

Operating/Storage temperature -40 to +85°C (-40 to +185°F)

64.5

Operating/Storage humidity max. 90% RH (non-condensing)

Protection type IP20

¹ When connecting with stranded wires, wire end ferrules must be used.

Connection diagrams Examples of connection

Thermostat Heater Thermostat e.g. Filter fan Thermostat e.g.

Regulating
NT 76-M NT 76-M for cooling NT 76-M Signal device

30 30 30
20 40 20 40 20 40

10 50 10 50 10 50

0
°C 60 0
°C 60 0
°C 60

A10
1 2 4 5 1 3 4 5 1 3 4 5
1 2 3 4 5
L

N L N

N
Art. No. Setting Range Operating Voltage
860662 -20 to +60°C 230VAC, 50/60Hz
Heater
860663 -4 to +140°F 120VAC, 50/60Hz

Filter fan, Cooling equipment, Signal device

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electronic Hygrostat

NTL 77-M (NTL 77) • Adjustable and pre-set relative humidity

• Status indicator (LED)
• High switching capacity
• Clip fxing
• Temperature-compensated

The electronic hygrostat senses the relative humidity in an enclosure with electric/electronic components and turns
on a heater at the set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the
adjustment knob is lit when the connected heater is in operation.

Technical Data
NTL 77-M (NTL 77)
Switch difference 5% RH (±3% RH tolerance) at +25°C (+77°F), 50% RH
Reaction time 5 sec.
Contact type change-over contact (relay)
Service life > 50,000 cycles
Max. switching capacity (relay output) 240VAC / 120VAC 8 (1.6) A
Max. inrush current AC 16A for 10 sec.
Optical indicator LED
42.5
Connection 5-pole terminal, clamping torque 0.5Nm max.: rigid/stranded wire 2.5mm²
(AWG 14)
Mounting clip for 35mm DIN rail, EN 60715
38

Casing plastic according to UL94 V-0, light grey

Dimensions 64.5 x 42.5 x 38mm
Weight approx. 70g

60 70
Fitting position Fitting position
Operating/Storage temperature 0 to +60°C (+32 to +140°F) / -20 to +70°C (-4 to +158°F)
50 80

40 90
%rF/RH

Operating/Storage humidity max. 90% RH (non-condensing)

64.5

Protection type IP20

¹ When connecting with stranded wires, wire end ferrules must be used.

Connection diagrams Examples of connection

Regulating

Thermostat
NT 77-M Heater NTL 150

60 70

50 80

40 90
%rF/RH

A11
1 2 4 5 LN

Art. No. Setting Range Operating Voltage

Heater 860664 40 to 90% RH 230VAC, 50/60Hz

860665 40 to 90% RH 120VAC, 50/60Hz
Filter fan, Cooling equipment, Signal device

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electronic Hygrotherm

NTL 78-M (NTL 78) • Temperature and humidity adjustable

• Wide voltage range
• Operating temperature down to -40°C
• High switching capacity
• Status indicator (LED)

The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/
electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation
of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the
world.  The LED integrated in the adjustment knob on the active controller is lit when the connected device is in
operation.

Technical Data
NTL 78-M (NTL 78)
Switch difference temperature: 2K (±1K tolerance) at +25°C (+77°F), 50% RH
humidity: 4% RH (±1% tolerance) at +25°C (+77°F), 50% RH
Reaction time (humidity) approx. 5 sec.
Contact type change-over contact (relay)
Service life VDE NO/NC > 15,000 cycles; UL: NO/NC > 30,000 cycles
Max. switching capacity (relay output) 240VAC, 10(1.6) A / 120VAC, 15(1.6) A
60 Max. inrush current AC 30A for 10 sec.
Optical indicator LED
Connection 5-pole terminal, clamping torque 0.5Nm max.: rigid/stranded¹ wire 2.5mm² (AWG 14)
37.5

Mounting clip for 35mm DIN rail, EN 60715

Casing plastic according to UL94 V-0, light grey
Dimensions 77.5 x 60 x 37.5mm
Weight approx. 0.2kg
30
20 40

10 50

0
°C 60

Fitting position vertical

77.5

60 70

50

40
%rF/RH
80

90
Operating/Storage temperature -40 to +60°C (-40 to +140°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20

¹ When connecting with stranded wires, wire end ferrules must be used.

Connection diagrams Examples of connection

Regulating
Heater NTL 150
Hygrostat NT 78-M

30
20 40

10 50

0
°C 60

50
60 70

80
A12
40 90
%rF/RH

LN

Heater
Art. No. Setting Range Temperature Setting Range Humidity Operating Voltage

Filter fan, Cooling equipment, Signal device

860666 0 to +60°C 50 to 90% RH 230VAC, 50/60Hz
860667 +32 to 140°F 50 to 90% RH 120VAC, 50/60Hz
860668 0 to +60°C 50 to 90% RH 120VAC, 50/60Hz

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Small Compact Thermostat

NTL 79 / NTL 80 • Large setting range

• Small size
• Simple to mount
• High switching performance

NTL 79: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature is
rising.

NTL 80: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching
signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.

Technical Data
NTL 79 / NTL 80
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life > 100,000 cycles
Max. switching capacity 250VAC, 10 (2) A / 120VAC, 15 (2) A
DC 30W at 24VDC to 72VDC
Max. inrush current AC 16A for 10 sec.
33
Connection 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
43
Weight approx. 40g
Fitting position variable
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20
60

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Connection diagrams Examples of connection

Regulating

Thermostat Thermostat
NTL 79 (NC) NTL 80 (NO) Thermostat Heater Thermostat e.g. Fan Thermostat e.g. Signal device
NTL 79 (NC) NTL 80 (NO) NTL 80 (NO)

A13

Art. No. Contact breaker (NC) Art. No. Contact maker (NO) Setting range
860669 860674 0 to +60°C
Heater 860670 860675 -10 to +50°C
860671 860676 +20 to +80°C
Filter fan, Cooling equipment, Signal device
860672 860677 +32 to +140°F
860673 860678 +14 to +122°F

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Small Compact Thermostat

DMO 1140 / DMS 1141 > Large setting range

> Small size
> Simple to mount
> High switching performance

DMO 1140: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature
is rising.

DMS 1141: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching
signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.

Technical Data
DMO 1140 / DMS 1141
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life > 100,000 cycles
Max. switching capacity 250VAC, 10 (2) A / 120VAC, 15 (2) A
DC 30W at 24VDC to 72VDC
Max. inrush current AC 16A for 10 sec.
33 Connection 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
43 Weight approx. 40g
Fitting position variable

20
30
40
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
10
0 ȭ 60
50
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20
60

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Connection diagrams Examples of connection

Regulating
Thermostat Thermostat
DMO 1140 (NC) DMS 1141 (NO) Thermostat Heater Thermostat e.g. Fan Thermostat e.g. Signal device
DMO 1140 (NC) DMS 1141 (NO) DMS 1141 (NO)
30 30 30
20 40 20 40 20 40
10 50 10 50 10 50
0 ȭ 60 0 ȭ 60 0 ȭ 60

A14

Art. No. Contact breaker (NC) Art. No. Contact maker (NO) Setting range
860371 860376 0 to +60°C
Heater 860372 860377 -10 to +50°C
860373 860378 +20 to +80°C
Filter fan, Cooling equipment, Signal device
860374 860379 +32 to +140°F
860375 860380 +14 to +122°F

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Mechanical Thermostat

NTL-7000 • Compact design

• Set temperature
• High switching capacity

Temperature’s scale adjustment:

After almost two days from the installation, to obtain a precjse scale adjustment, measure the room temperature with a
reference thermometer, placed aside the thermostat, Holding the shagrened part of the Knob, turn the index with a coin,
to reach the same value of the thermometer, We suggest to install the equipment at about 1.5 mt from the floor and
from any heat source.

Technical Data
NTL-7000
Operating Voltage 230VAC
Max Load NTL-7000A: 16A, NTL-7000B: 4A
Temperature Range 0-40°C
Function heating, cooling
Switching Differential ±4K
Sensor NTL-7000A/7000B: internal
Ambient Temperature -10~50°C
Protect Class IP20
Material fireproof UL 94 V-0
Sensor Type NTL-7000A/7000B: thermostatic bimetal

Art. No. Control Type Control Type Description

NTL-7000A Mechanical type NO+NC type with internal thermostatic bimetal sensor
NTL-7000A1 Mechanical type NO type with internal thermostatic bimetal sensor
NTL-7000A2 Mechanical type NC type with internal thermostatic bimetal sensor
NTL-7000B Mechanical type with switch, NO+NC type with internal thermostatic bimetal sensor
NTL-7000B1 Mechanical type with switch, NO type with internal thermostatic bimetal sensor
NTL-7000B2 Mechanical type with switch, NC type with internal thermostatic bimetal sensor

Important
Accelerating resistance with voitage to 220-250V a.c.
Regulating

This thermostat is provided with an accelerating resistance which must be absolutely connected in order to obtain the
regulation’s performances. The terminal 4 has thus to be connected to the neutral according to the diagram shown on
the cover, This connection allows also the wording of the pilot lamp which indicates the operation of the heating.

A15 Wiring Diagram

60

1 1
59

Load 1 for 2 2
Cooling
3 Load 3
Load 2 for
Heating
4 4

59 L N L N
NTL-7000A NTL-7000B

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electronic Thermostat

NTL-8000 > Compact design

> Set temperature
> High switching capacity

Especially used for controlling fan filter, heater and heat exchanger, also could be monitoring the electric cabinetinner
temperature when working as signal arouser.

Technical Data
NTL-8000
Operating Voltage 24V/48V/60V/110V/250V
Max Load 16A
Temperature Range -20~60°C
Function heating, cooling
Switching Differential 1K+/-0.8K
Sensor internal
Ambient Temperature -5~60°C
Protect Class IP20
Material fireproof UL 94 V-0
Sensor Type NTC

Important
1. Makebimetal sensor as heat sensitivity set to feedback of heat
2. Contact point scheme:single switchover contact point as instant switch component
3. Voltage scope is wide any type could be used from 24V to 230V
4. Time-saving connection,terminal block could be installed with screw from outside
5. Easy installation,could be installed to 35mm din rail vertically or horizontally according to EN50 022, it could be
clipped to NS/35-ES cabinet profile with its accessory adapter.

48V (L2*)
24V (L1*) 115V
60V 250V
N L N
N N

1 2 3 4 5 6 7
Regulating

RF/Acc.

RF/Acc.

<
RF/Acc.
A23 RF/Acc.
9

$&9
$&9
9

1 2 3 4 5 6 7

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Hazardous Area Thermostat

REx 011 > Compact design

> Set temperature
> High switching capacity

Compact small mechanical thermostat for temperature regulation and monitoring of heaters, for example in transmitter
cabinets, control panels and measuring equipment which are deployed in areas with explosion hazard. The special
switch construction enables high response accuracy, small switch temperature difference and a very long service life.
High switching performance allows direct control of the heaters.

Technical Data
REx 011
Switch temperature difference 4K (±1K tolerance)
Sensor element thermostatic bimetal
Contact type (1-pole) opens with rising temperature
Service life > 100 000 cycles
Max. switching capacity 250VAC, 1.3 (0.65) A
Max. inrush current AC 4A for 12 sec.
Connection Si HF - JZ 3 x 0.5mm², length 1m
Mounting mounting bracket with nut M8 (see illustration)
Casing aluminium, black anodised
Dimensions length 110mm
Weight approx. 0.2kg
Fitting position variable
Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP65 / I (earthed)

Φ4.2 Φ3.6

SW19
Φ9

M8
20

20 24
Regulating

50
110

8.5
2
26
35

A21 Aluminium
Mounting Bracket

Art. No. Ambient temperature¹ Switch-off temperature Ex protection type II 2 GD

01180.0-00 0 to +60°C +15°C (±4K tolerance) Gases: Ex d IIC T6 Gb Dusts: Ex tb IIIC T85°C Db IP6X
01181.0-00 +32 to 140°F +25°C (±4K tolerance) Gases: Ex d IIC T6 Gb Dusts: Ex tb IIIC T85°C Db IP6X

¹ Ambient temperature inside of the cabinet/enclosure

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Heating
Semiconductor Heater, Touch-safe Heater, Fan Heater

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD.
www.china-natural.com
 Mini-Radiant Heaters

NTL 030 | 10W to 30W • Dynamic heating up

• Energy saving
• Wide voltage range

The NTL 030 Mini series of radiant heaters consists of three versions with heating performance ratings of 10, 20 and 30
Watts.
The new mini-heaters are particularly suitable for use in small housings or for the heating of isolated spots in sensitive
areas.

Technical Data
NTL 030
Rated voltage 120-260V AC/DC
Functional range 120-260 V AC/DC 50/60 Hz
Duty cycle 100%
Operating temperature range - 40 °C … + 70 °C (- 40 °F … + 158 °F)
Storage temperature range - 40 °C … + 70 °C (- 40 °F … + 158 °F)
Installation orientation as desired, preferably vertical
Device construction aluminium profile, black anodised
Type of mounting snap fastening for 35 mm profile bars according to EN 60715
Protection class II
Type of connection connecting cable (300 mm)
Protection type/Protection class IP 54

Dimensions

300
45

50(10W) 29.5
Heating

75(20~30W)
Unit: mm

B1
Art. No. Power consumption Starting current Max. surface temperature Weight (approx.)
860220 10 W 1.0 A 95 °C 85 g
860221 20 W 1.1 A 115 °C 120 g
860222 30 W 1.2 A 140 °C 120 g

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 150 | 15W to 200W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 150
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 150

Thermostat NTL 10A-F (NC)

30
20 40
10 50
0 60 °C

70

Heating
LN
50

B2

Art. No. Heating capacity² Length (L) Weight (approx.)

860055 15W 65mm 0.3kg
860056 30W 65mm 0.3kg
35
L

860057 45W 65mm 0.3kg

860058 50W 80mm 0.4kg
860059 60W 140mm 0.5kg
860060 75W 140mm 0.5kg
860061 100W 140mm 0.5kg
LN
35

860062 150W 220mm 0.7kg

39.5 24 860219 200W 220mm 0.7kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 151 | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 151
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 151

Thermostat NTL 10A-F (NC)

30
20 40
10 50
61±0.5 0 60 °C
Heating

56±0.5
64±0.5

B3

Art. No. Heating capacity² Length (L) Weight (approx.)

860063 15W 65mm 0.25kg
35

860064 30W 65mm 0.25kg

L

860065 45W 65mm 0.25kg

860066 50W 80mm 0.35kg
860067 60W 140mm 0.35kg
860068 75W 140mm 0.45kg
32

860069 100W 140mm 0.45kg

58 21.5 860070 150W 220mm 0.65kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 151S | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data

Here is with spring wiring NTL 151S

connector for fast fixing Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
for cable, just press the Heating element PTC resistor - temperature limiting
connector cover, then Heater body extruded aluminium profile, anodised
insert cable inside of the Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
wiring hole, then is ok.
Connection casing plastic according to UL94 V-0, black
Save time and Satefy.
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 151S

Thermostat NTL 10A-F (NC)

30
20 40
10 50
61±0.5 0 60 °C
Heating

56±0.5
64±0.5

B3

Art. No. Heating capacity² Length (L) Weight (approx.)

860383 15W 65mm 0.25kg
35

30W 65mm 0.25kg

L

860384
860385 45W 65mm 0.25kg
860386 50W 80mm 0.35kg
860387 60W 140mm 0.35kg
860388 75W 140mm 0.45kg
32

860389 100W 140mm 0.45kg

58 21.5 860390 150W 220mm 0.65kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 151SB | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 151SB
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection
Heater NTL
Heater NTL 151
151SB

Thermostat NTL 10A-F (NC)

30
20 40
10 50
61±0.5 0 60 °C
Heating

56±0.5
64±0.5

B3

Art. No. Heating capacity² Length (L) Weight (approx.)

860391 15W 65mm 0.25kg
35

30W 65mm 0.25kg

L

860392
860393 45W 65mm 0.25kg
860394 50W 80mm 0.35kg
860395 60W 140mm 0.35kg
860396 75W 140mm 0.45kg
32

860397 100W 140mm 0.45kg

58 21.5 860398 150W 220mm 0.65kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Touch-Safe Heater (Semiconductor)

NTL 152 | 50W to 150W • Low surface temperature

• Quick mounting due to clip fixing
• Double insulated (plastic)
• Wide voltage range
• Small size

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports
the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible
side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and
hygrostats can directly be connected to the heater NTL 152. This heater is also available in a version with plug-in
thermostat requiring no additional wiring. The heaters are designed for permanent operation.

Technical Data
NTL 152
Operating voltage 120-260V AC/DC¹ (min. 110V, max. 265V)
Fast Fixing Part
Heating element PTC resistor - temperature limiting
Surface temperature < +80°C (+176°F), except upper protective grille
Connection 4-pole terminal 2.5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Examples of connection

Heater NTL 152

Thermostat
NTL 10A-F
60

30
20 40
10 50
0 60 °C
90

Heating
AC L B4
N
L

Art. No. Heating capacity² Air outlet temperature³ Dimensions Weight (approx.)
860071 50W +86°C (+186.8°F) 110 x 60 x 90mm 0.3kg
860072 100W +120°C (+248°F) 150 x 60 x 90mm 0.4kg
860073 150W +145°C (+293°F) 150 x 60 x 90mm 0.4kg

² ambient temperature - see Heating capacity / Ambient temperature diagram;

³ measured 50mm above protective grille

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Touch-Safe Small Heater (Semiconductor)

NTL 153 | 10W, 20W, 30W • Low surface temperature

• Double insulated (plastic housing)
• Wide voltage range
• Dynamic heating up
• Clip fixing

The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a
minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for
permanent operation.

Technical Data
NTL 153
Operating voltage 120-260V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Fast Fixing Part
Surface temperature < +85°C (+185°F) (according to VDE 0100), except upper protective grille
Connection 2-pole terminal 2.5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45°C to +70°C (-49°F to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request
38.38 ¹ Operating with voltages below 140V AC/DC reduces heating performance by approx 10%.

Examples of connection
75.85

Heater NTL 153

10.08
Thermostat
NTL 10A-F

38.37 75.85
30
20 40
10 50
0 60 °C
Heating

107.55
98.59

L
N
B5

10.08 24.70 Art. No. Heating capacity² Dimensions Weight (approx.)

69.09
860245 10W 96 x 38 x 79mm 0.2kg
860246 20W 96 x 38 x 79mm 0.3kg
860247 30W 96 x 38 x 79mm 0.3kg

² at +20°C (+68°F) ambient temperature

 Semiconductor Heater

NTL 154 | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 154
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Slide up and down fixing part
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 154

Thermostat NTL 10A-F (NC)

30
20 40
10 50
61±0.5 0 60 °C

Heating
56±0.5
64±0.5

B6

Art. No. Heating capacity² Length (L) Weight (approx.)

860288 15W 65mm 0.25kg
35

860289 30W 65mm 0.25kg

L

860290 45W 65mm 0.25kg

860291 50W 80mm 0.35kg
860292 60W 140mm 0.35kg
860293 75W 140mm 0.45kg
32

860294 100W 140mm 0.45kg

58 21.5 860295 150W 220mm 0.65kg
² at +20°C (+68°F) ambient temperature
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 154S | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 154S
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)

Slide up and down fixing part Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 154S

Thermostat NTL 10A-F (NC)

30
20 40
10 50
61±0.5 0 60 °C

Heating
56±0.5
64±0.5

B6

Art. No. Heating capacity² Length (L) Weight (approx.)

860399 15W 65mm 0.25kg
35

30W 65mm 0.25kg

L

860400
860401 45W 65mm 0.25kg
860402 50W 80mm 0.35kg
860403 60W 140mm 0.35kg
860404 75W 140mm 0.45kg
32

860405 100W 140mm 0.45kg

58 21.5 860406 150W 220mm 0.65kg
² at +20°C (+68°F) ambient temperature
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 154SB | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 154SB
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Slide up and down fixing part Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 154SB

Thermostat NTL 10A-F (NC)

30
20 40
10 50
61±0.5 0 60 °C

Heating
56±0.5
64±0.5

B6

Art. No. Heating capacity² Length (L) Weight (approx.)

860407 15W 65mm 0.25kg
35

30W 65mm 0.25kg

L

860408
860409 45W 65mm 0.25kg
860410 50W 80mm 0.35kg
860411 60W 140mm 0.35kg
860412 75W 140mm 0.45kg
32

860413 100W 140mm 0.45kg

58 21.5 860414 150W 220mm 0.65kg
² at +20°C (+68°F) ambient temperature
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Small Semiconductor Heater

NTL 155 | 10W to 30W • Dynamic heating up

• Energy saving
• Wide voltage range
• Clip fixing

The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a
minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for
permanent operation.

Technical Data
NTL 155
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP44 / I (earthed)
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 155

Thermostat NTL 79 (NC)

50 25

clip for
35mm
DIN rail
L
12
Heating

300

Art. No. Operating voltage Heating capacity¹ Connection Length (L) Weight (approx.)
B7
860322 120-240V AC/DC² 10W 3 x 0.5mm² x 300mm cable (silicone) 52mm 0.1kg
860323 120-240V AC/DC² 20W 3 x 0.5mm² x 300mm cable (silicone) 60mm 0.2kg
860324 120-240V AC/DC² 30W 3 x 0.5mm² x 300mm cable (silicone) 70mm 0.2kg

¹ at +20°C (+68°F) ambient temperature,

² (min. 110V, max 265V) Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 156 | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing
• Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 156
Operating voltage 120-240V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 156

Thermostat NTL 79 (NC)

Heating
B8

70 60
50 Art. No. Heating capacity² Length (L) Weight (approx.)
5

860325 15W 65mm 0.3kg

860326 30W 65mm 0.3kg
860327 45W 65mm 0.3kg
L

860328 50W 65mm 0.3kg

860329 60W 140mm 0.4kg
860330 75W 140mm 0.5kg
39

860331 100W 140mm 0.5kg

47 20 860332 150W 220mm 0.7kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater-Screw Fixing Type

NTL 156-S 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing
• Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 156-S
Operating voltage 120-240V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection

Heater NTL 156-S

Thermostat NTL 79 (NC)

Heating
B8

70 60
50 Art. No. Heating capacity Length (L) Weight (approx.)
5

860325-S 15W 65mm 0.3kg

860326-S 30W 65mm 0.3kg
860327-S 45W 65mm 0.3kg
L

860328-S 50W 65mm 0.3kg

860329-S 60W 140mm 0.4kg
860330-S 75W 140mm 0.5kg
39

860331-S 100W 140mm 0.5kg

47 20 860332-S 150W 220mm 0.7kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 157 | 15W to 150W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing
• Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 157
Operating voltage 120-240V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and
rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Example of connection
Heater NTL 157

Thermostat NTL 79 (NC)

Heating

B9
70 60
50
3

Art. No. Heating capacity² Length (L) Weight (approx.)

860333 15W 65mm 0.3kg
860334 30W 65mm 0.3kg
L

860335 45W 65mm 0.3kg

860336 50W 80mm 0.4kg
860337 60W 140mm 0.4kg
20

860338 75W 140mm 0.5kg

860339 100W 140mm 0.5kg
500

860340 150W 140mm 0.7kg

² at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact Semiconductor Fan Heater

NTL 400 | 150W to 500W • Compact Design

• Clip fixing
• Long service life
• Temperature safety cut-out

Compact fan heater prevents formation of condensation and frost. The integrated high-performance axial fan provides
an evenly distributed interior air temperature in enclosures with electric/electronic components.

Technical Data
NTL 400
Operating voltage 120V AC or 230V AC or 120 & 230V AC or 24V DC or 48V DC
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages on request

Examples of connection

Heater Switch module Control contact Control contact Heater

NT 73-F e.g. thermostat NTL 10A-F e.g. thermostat NTL 10A-F

30 30
20 40 20 40
10 50 10 50
0 60 °C 0 60 °C

Us

DC48V - + 1 2 - + DC48V

Heating
B10
L

Art. No. Heating capacity Operating voltage Dimensions Weight (approx.)

860074 150W 230VAC, 50/60Hz 182mm 1.1kg
860075 250W 230VAC, 50/60Hz 182mm 1.1kg
L N

860076 300W 230VAC, 50/60Hz 222mm 1.4kg

105 860077 400W 230VAC, 50/60Hz 222mm 1.4kg
85
860078 500W 230VAC, 50/60Hz 222mm 1.4kg
860079 150W 120VAC, 50/60Hz 182mm 1.1kg
860080 250W 120VAC, 50/60Hz 182mm 1.1kg
85

860081 300W 120VAC, 50/60Hz 222mm 1.4kg

View from below 860082 400W 120VAC, 50/60Hz 222mm 1.4kg

860083 500W 120VAC, 50/60Hz 222mm 1.4kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 401 | 150W to 400W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 401
Operating voltage 120 & 230V AC or 24V DC or 48V DC
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages on request

Example of connection

Heater NTL 401

Control contact
e.g. thermostat NTL 10A-F

30
20 40
10 50
Heating

0 60 °C
65.00
19.00 50.00
44.00

50.00
65.00

B11

Art. No. Heating capacity¹ Operating voltage Length (L) Weight (approx.)
860084 150W 230VAC, 50/60Hz 182mm 0.8kg
35

860085 250W 230VAC, 50/60Hz 182mm 0.8kg

860086 300W 230VAC, 50/60Hz 222mm 1.2kg
860087 400W 230VAC, 50/60Hz 222mm 1.2kg
860088 150W 120VAC, 50/60Hz 182mm 0.8kg
20.00 860089 250W 120VAC, 50/60Hz 182mm 0.8kg
59.50

860090 300W 120VAC, 50/60Hz 222mm 1.2kg

860091 400W 120VAC, 50/60Hz 222mm 1.2kg
¹ at +20°C (+68°F) ambient temperature
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 401S | 150W to 400W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 401S
Operating voltage 120 & 230V AC or 24V DC or 48V DC
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages on request

Example of connection

Heater NTL 401S

Control contact
e.g. thermostat NTL 10A-F

30
20 40
10 50
Heating

0 60 °C

19

B11 65

65
Art. No. Heating capacity¹ Operating voltage Length (L) Weight (approx.)
860088 150W 120 & 230VAC, 50/60Hz 182mm 0.8kg
860089 250W 120 & 230VAC, 50/60Hz 182mm 0.8kg
860090 300W 120 & 230VAC, 50/60Hz 222mm 1.2kg
35

860091 400W 120 & 230VAC, 50/60Hz 222mm 1.2kg

L

20.00
59.50

¹ at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 402 | 150W to 400W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 402
Operating voltage 120 & 230V AC or 24V DC or 48V DC
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages on request

Example of connection
65.00
19.00 50.00 Heater NTL 402

Control contact
e.g. thermostat NTL 10A-F
44.00

50.00
65.00

Heating
30
20 40
10 50
0 60 °C

B12
35

Art. No. Heating capacity¹ Operating voltage Length (L) Weight (approx.)
20.00 860241 150W 120 & 230VAC 182mm 0.8kg
59.50

860242 250W 120 & 230VAC 182mm 0.8kg

860243 300W 120 & 230VAC 222mm 1.2kg
860244 400W 120 & 230VAC 222mm 1.2kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 402S | 150W to 400W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 402S
Operating voltage 120 & 230V AC or 24V DC or 48V DC
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
19 Note other voltages on request

Example of connection

65 Heater NTL 402S

Control contact
e.g. thermostat NTL 10A-F

Heating
30
20 40
65 10 50
0 60 °C

B12

Art. No. Heating capacity¹ Operating voltage Length (L) Weight (approx.)
860415 150W 120 & 230VAC 182mm 0.8kg
35

L 860416 250W 120 & 230VAC 182mm 0.8kg

860417 300W 120 & 230VAC 222mm 1.2kg
860418 400W 120 & 230VAC 222mm 1.2kg
59.50

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact Semiconductor Fan Heater

NTL 403 | 150W to 400W • Small, compact design

• Quiet in operation
• Dynamic heating up
• Clip or screw fixing

Fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures
with electric/electronic components. The heater is connected using the internal terminal connectors. The small size of
the NTL 403 makes it ideal for use in enclosures where space is at a premium.

Technical Data
NTL 403
Operating voltage 120V AC or 230V AC or 120 & 230V AC
Heating element PTC resistor - temperature limiting
Surface temperature 150W/250W: max. +50°C (+122°F), 400W: max. +65°C (+149°F)
each except upper protective grille at +20°C (+68°F) ambient temperature
Axial fan, ball bearing air flow, free flow
45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
Connection 2-pole clamp max. 2.5mm²,
clamping screw torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3mm)
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request

Examples of connection

Fan Heater NTL-403 Heating capacity / Ambient temperature diagram

NTL 403
Thermostat NTL 10A-F (NC)
Heating capacity (W)

30
20 40
10 50
0 60 °C
Heating

L
B13 N Temperature (°C)

Art. No. Heating capacity¹ Operating voltage Dimensions Weight (approx.)

90.80

860092 150W 230VAC, 50/60Hz 75 x 65 x 90mm 0.3kg

860093 250W 230VAC, 50/60Hz 90 x 85 x 111mm 0.5kg
85.50
860094 400W 230VAC, 50/60Hz 90 x 85 x 111mm 0.5kg
860095 150W 120VAC, 50/60Hz 75 x 65 x 90mm 0.3kg
85.50

860096 250W 120VAC, 50/60Hz 90 x 85 x 111mm 0.5kg

860097 400W 120VAC, 50/60Hz 90 x 85 x 111mm 0.5kg

¹ at +20°C (+68°F) ambient temperature

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact Semiconductor Fan Heater

NTL 404 | 150W to 500W • Compact Design

• Clip fixing
• Long service life
• Temperature safety cut-out

Compact fan heater prevents formation of condensation and frost. The integrated high-performance axial fan provides
an evenly distributed interior air temperature in enclosures with electric/electronic components.

Technical Data
NTL 404
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages on request

Examples of connection

Heater Switch module Control contact Control contact Heater

NT 73-F e.g. thermostat NTL 79 e.g. thermostat NTL 79

Us

DC48V - + 1 2 - + DC48V

Heating
Art. No. Heating capacity Operating voltage Dimensions Weight (approx.) B14
L

860341 150W 230VAC, 50/60Hz 182mm 1.1kg

860342 250W 230VAC, 50/60Hz 182mm 1.1kg
860343 300W 230VAC, 50/60Hz 222mm 1.4kg
860344 400W 230VAC, 50/60Hz 222mm 1.4kg
105
85 860345 500W 230VAC, 50/60Hz 222mm 1.4kg
860346 150W 120VAC, 50/60Hz 182mm 1.1kg
860347 250W 120VAC, 50/60Hz 182mm 1.1kg
85

860348 300W 120VAC, 50/60Hz 222mm 1.4kg

860349 400W 120VAC, 50/60Hz 222mm 1.4kg

View from below 860350 500W 120VAC, 50/60Hz 222mm 1.4kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact Semiconductor Fan Heater

NTL 405 | 100W to 400W • Compact

• Flat design
• High air through-flow
• Temperature safety cut-out
• Clip fixing

Compact high-performance fan heater prevents formation of condensation and frost and provides an evenly distributed
interior air temperature in enclosures with electric/electronic components. This fan heater may only be operated
together with a fan but is also available without fan for self-assembly (NTL 405) and with pre-configured fan (NTL 406).

Technical Data
NTL 405
Heating element high performance cartridge
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body die-cast aluminium (glass bead blasted)
Connection 3-pole screw connector 2.5mm², clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)

25 22
Φ4.2 Examples of connection

FanHeater NTL405
80°
71.5

Thermostat NTL 79 (NC)

32

68 18

a.) 25 22
Φ4.2

d.)
104.8

119°
Heating

Art. No. (230VAC) Art. No. (120VAC) Heating capacity Dimensions Weight (approx.)
860351 860361 100W 80 x 112 x 22mm 0.4kg
b.)
c.)
32

860352 860362 150W 80 x 112 x 22mm 0.4kg

68 18
B15 860353 860363 200W 119 x 151 x 22mm 0.5kg
860354 860364 300W 119 x 151 x 22mm 0.5kg
a.) Clip b.) Type plate c.) Axial fan
d.) Air direction 860355 860365 400W 119 x 151 x 22mm 0.5kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact Semiconductor Fan Heater

NTL 406 | 100W to 400W • Compact

• Flat design
• High air through-flow
• Temperature safety cut-out
• Clip fixing

Compact high-performance fan heater prevents formation of condensation and frost and provides an evenly distributed
interior air temperature in enclosures with electric/electronic components. This fan heater may only be operated
together with a fan but is also available without fan for self-assembly (NTL 405) and with pre-configured fan (NTL 406).

Technical Data
NTL 406
Heating element high performance cartridge
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body die-cast aluminium (glass bead blasted)
Connection 3-pole screw connector 2.5mm², clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Axial fan, ball bearing airflow see table, service life 50,000h at +25°C (+77°F)
Connection (axial fan) 2-pole screw connector 2.5mm² (L2/N2)
Protection type/Protection class IP20 / I (earthed)

25 22
Φ4.2 Examples of connection

FanHeater NTL406
80°
71.5

Thermostat NTL 79 (NC)

32

68 18

a.) 25 22
Φ4.2

Heating
d.)
104.8

119°

Art. No. (230VAC) Art. No. (120VAC) Heating capacity Dimensions Weight (approx.)
860356 860366 100W 80 x 112 x 22mm 0.6kg B16
b.)
c.)
32

860357 860367 150W 80 x 112 x 22mm 0.6kg

68 18
860358 860368 200W 119 x 151 x 22mm 0.9kg
860359 860369 300W 119 x 151 x 22mm 0.9kg
a.) Clip b.) Type plate c.) Axial fan
d.) Air direction 860360 860370 400W 119 x 151 x 22mm 0.9kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Semiconductor Heater

NTL 407 | 150W to 350W • Pressure clamp connectors

• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify
installation.

Technical Data
NTL 407
Operating voltage Heater: 230V AC, Fan: 24V DC
Heating element PTC resistor-temperature limiting
Inrush current ≤8.0A
Airflow 0.38m3/min (14 CFM)
Fan lifetime 70,000hrs (45°C)
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (350W)

51.90
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
69.32

Connection casing plastic according to UL94 V-0, black

Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
68.77
Operating/Storage temperature -40 to +70°C (-40 to +158°F)
9.24
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (earthed)
Note other voltages on request
124.48
93.21

Example of connection

Heater NTL 407 Control contact

Heating

e.g. thermostat NTL 10A-F

30
20 40
10 50
0 60 °C
B11
74.11

DC24V AC230V

45.42 73.56

13.91 Art. No. Heating capacity¹ Operating voltage Dimensions Weight (approx.)
860371 150W 230VAC, 50/60Hz 94 x 70 x 52mm 0.3kg
860372 200W 230VAC, 50/60Hz 94 x 70 x 52mm 0.3kg
93.50

860373 300W 230VAC, 50/60Hz 94 x 70 x 52mm 0.3kg

860374 350W 230VAC, 50/60Hz 94 x 70 x 52mm 0.3kg
¹ at +20°C (+68°F) ambient temperature
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact Semiconductor Fan Heater

NTL 408 | 150W to 400W • Small, compact design

• Quiet in operation
• Dynamic heating up
• Clip or screw fixing

Fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures
with electric/electronic components. The heater is connected using the internal terminal connectors. The small size of
the NTL 403 makes it ideal for use in enclosures where space is at a premium.

Technical Data
NTL 408
Operating voltage 120V AC or 230V AC or 120 & 230V AC
Heating element PTC resistor - temperature limiting
Surface temperature 150W/250W: max. +50°C (+122°F), 400W: max. +65°C (+149°F)
each except upper protective grille at +20°C (+68°F) ambient temperature
Axial fan, ball bearing air flow, free flow
45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
With Fast Spring Connection 2-pole clamp max. 2.5mm²,
Wiring Connector clamping screw torque 0.8Nm max.

Just press the connector Casing plastic according to UL94 V-0, black
Mounting clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3mm)
then insert cable into the
Fitting position vertical airflow (air outlet up)
hole is ok. Fast and
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
safety.
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request

Examples of connection
Heating

Fan+Heater
Fan+Heater E
E
B13

Fan
Heater
E

Art. No. Heating capacity Operating voltage Dimensions Weight (approx.)

860419 250W 230VAC, 50/60Hz 61 x 80 x 93mm 0.25kg
860420 4000W 230VAC, 50/60Hz 61 x 80 x 93mm 0.25kg
860421 250W 120VAC, 50/60Hz 61 x 80 x 93mm 0.25kg
860422 400W 120VAC, 50/60Hz 61 x 80 x 93mm 0.25kg
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Space-Saving PTC Heater Without Fan

NTL 500 | 200W to 500W • Compact

• Flat design
• Temperature safety cut-out
• Twist clip or screw fixing

The compact high-performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated
together with fan, but is also available without axial fan (for self-installation). The fan heaters are available with two
different mounting systems – either mounting by screw fixing or with a new and unique twist clip mounting system.
These options allow for a quick and easy installation of the fan heater.

Technical Data
NTL 500
Operating voltage 120V AC or 230V AC or 120 & 230V AC
Heating element PTC
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Axial fan not included in delivery, for self-assembly
Connection 2-pole dual pressure clamp for rigid wire 2.5mm², stranded wire (with wire
end ferrule) 1.5mm²
Casing plastic according to UL94 V-0, black
Mounting twist clip for 35mm DIN rail, EN 60715 or
screw fixing (M6), torque 2Nm max., washers have to be used
Fitting position vertical airflow (air outlet up)
Dimensions 160 x 127 x 43.7mm
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)

Examples of connection

43.70

Thermostat NTL 10A-F (NC)

20
30
40 Fan Heater NTL-500
10 50
0 60 °C
Heating

L
N
B17

Art. No. clip fixing Heating capacity Operating voltage Weight (approx.)
860264 200W 120V-230VAC/DC 0.56kg
860265 300W 120V-230VAC/DC 0.56kg
860266 400W 120V-230VAC/DC 0.56kg
860267 500W 120V-230VAC/DC 0.56kg
166.00

105.30

105.00
127.00

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Space-Saving PTC Fan Heater with Fan

NTL 500-F | 200W to 1200W • Compact

• Flat design
• High air through-flow
• Temperature safety cut-out
• Twist clip or screw fixing

The compact high-performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated
together with fan, but is also available without axial fan (for self-installation). The fan heaters are available with two
different mounting systems – either mounting by screw fixing or with a new and unique twist clip mounting system.
These options allow for a quick and easy installation of the fan heater.

Technical Data
NTL 500-F
Operating voltage 120V AC or 230V AC or 120 & 230V AC
Heating element PTC
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Axial fan, ball bearing airflow 150m³/h, free flow. service life 50,000h at +25°C (+77°F)
Connection 3-pole dual pressure clamp for rigid wire 2.5mm², stranded wire (with wire
end ferrule) 1.5mm²
Casing plastic according to UL94 V-0, black
Mounting twist clip for 35mm DIN rail, EN 60715 or screw fixing (M6),
torque 2Nm max., washers have to be used
Fitting position vertical airflow (air outlet up)
Dimensions 169 x 127 x 89mm
Weight approx. 1.3kg
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / heater: II (double insulated); fan: I (earthed)

91.90
Examples of connection
43.70

Thermostat NTL 10A-F (NC)

20
30
40 Fan Heater NTL-500
10 50
0 60 °C

Heating
L
N
B18
94.38

Type Art. No. Heating Operating Type Art. No. Heating Operating
clip fixing Capacity Voltage clip fixing Capacity Voltage
860268 200W 860278 200W
860269 300W 860279 300W
860270 400W 860280 400W
860271 500W 860281 500W
With 860272 600W With 860282 600W
120VAC, 120VAC,
105.30

230VAC 120VAC
860273 700W 50/60Hz 860283 700W 50/60Hz
Fan Fan
860274 800W 860284 800W
860275 900W 860285 900W
105.00
127.00 860276 1000W 860286 1000W
860277 1200W 860287 1200W
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Space-Saving PTC Heater Without Fan

NTL 700 | 200W to 700W • Compact

• Flat design
• Temperature safety cut-out
• Twist clip or screw fixing

The compact high-performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated
together with fan, but is also available without axial fan (for self-installation). The fan heaters are available with two
different mounting systems – either mounting by screw fixing or with a new and unique twist clip mounting system.
These options allow for a quick and easy installation of the fan heater.

Here is Thermostat or Hygrostat

for controlling Technical Data
NTL 700
Operating voltage 120V AC or 230V AC
Heating element 200-400W:high performance cartridge, 500W-700W: PTC
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Axial fan not included in delivery, for self-assembly
Connection 2-pole dual pressure clamp for rigid wire 2.5mm², stranded wire (with wire
end ferrule) 1.5mm²
Casing plastic according to UL94 V-0, black
Mounting twist clip for 35mm DIN rail, EN 60715 or
screw fixing (M6), torque 2Nm max., washers have to be used
Fitting position vertical airflow (air outlet up)
Dimensions 169 x 127 x 45mm
Weight approx. 0.7kg
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)

Type Art. No. clip fixing Heating Capacity Setting Range Operating Voltage
43.70 860098 200W
860099 300W
With 860100 400W 0 to +60°C
Electronic 230VAC, 50/60Hz
860101 500W +32 to +140°F
Thermostat
860102 600W
860103 700W
Heating

860104 200W
860105 300W
With 860106 400W 0 to +60°C
Electronic 120VAC, 50/60Hz
860107 500W +32 to +140°F
B19 Thermostat
860108 600W
860109 700W
860110 200W
860111 300W
With 860112 400W
Electronic 40-90%RH 230VAC, 50/60Hz
Hygrostat 860113 500W
860114 600W
166.00

860115 700W
105.30

860116 200W
860117 300W
With 860118 400W
Electronic 40-90%RH 120VAC, 50/60Hz
105.00 Hygrostat 860119 500W
127.00 860120 600W
860121 700W
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Space-Saving PTC Fan Heater with Fan

NTL 700-F | 200W to 700W • Compact

• Flat design
• High air through-flow
• Temperature safety cut-out
• Twist clip or screw fixing

The compact high-performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated
together with fan, but is also available without axial fan (for self-installation). The fan heaters are available with two
different mounting systems – either mounting by screw fixing or with a new and unique twist clip mounting system.
These options allow for a quick and easy installation of the fan heater.
Here is Thermostat or Hygrostat
for controlling
Technical Data
NTL 700-F
Operating voltage 120V AC or 230V AC
Heating element 200-400W: high performance cartridge, 500W-700W: PTC
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Axial fan, ball bearing airflow 150m³/h, free flow
service life 50,000h at +25°C (+77°F)
Connection 3-pole dual pressure clamp for rigid wire 2.5mm², stranded wire (with wire
end ferrule) 1.5mm²
Casing plastic according to UL94 V-0, black
Mounting twist clip for 35mm DIN rail, EN 60715 or
screw fixing (M6), torque 2Nm max., washers have to be used
Fitting position vertical airflow (air outlet up)
Dimensions 169 x 127 x 89mm
Weight approx. 1.3kg
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / heater: II (double insulated); fan: I (earthed)
91.90
43.70
Type Art. No. Heating Setting Operating Type Art. No. Heating Setting Operating
clip fixing Capacity Range Voltage clip fixing Capacity Range Voltage
860146 200W 860158 200W
860147 300W 860159 300W
860148 400W 860160 400W
860149 500W 860161 500W

Heating
With 860150 600W 0 to +60°C With 860162 600W
230VAC, 230VAC,
Electronic +32 to Electronic 40-90%RH
50/60Hz 50/60Hz
Thermostat 860151 700W +140°F Hygrostat 860163 700W
860248 800W 860256 800W
860249 900W 860257 900W B20
94.38

860250 1000W 860258 1000W

860251 1200W 860259 1200W
860152 200W 860164 200W
860153 300W 860165 300W
860154 400W 860166 400W
860155 500W 860167 500W
With 860156 600W 0 to +60°C With 860168 600W
120VAC, 120VAC,
105.30

Electronic +32 to Electronic 40-90%RH

50/60Hz 50/60Hz
Thermostat 860157 700W +140°F Hygrostat 860169 700W
860252 800W 860260 800W
860253 900W 860261 900W
105.00
127.00 860254 1000W 860262 1000W
860255 1200W 860263 1200W
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Compact High-Performance Fan Heater(Semiconductor)

800W-1200W

The compact high performance fan heater prevents formation of condensation and frost and
provides an evenly distributed interior air temperature in enclosures with electric/electronic
components. The plastic housing provides double insulation and acts as protection against
contact. The fan heater is available with integrated thermostat for temperature control. The
NTL 1200 was designed as a stationary unit for wall fixing. For fixing on the bottom of the
enclosure the fan heater NTL 1200 is recommended.

Technical Data

Setting range

www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]

 Compact Semiconductor Fan Heater

NTL 1500 | 200W to 1500w • Compact Design

• Clip fixing
• Long service life
• Temperature safety cut-out

Compact fan heater prevents formation of condensation and frost. The integrated high-performance axial fan provides
an evenly distributed interior air temperature in enclosures with electric/electronic components.

Technical Data
NTL 1500
Operating voltage 120V AC or 230V AC or 120 & 230V AC
Heating element PTC resistor-temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Heater body anodised extruded aluminium profile
Surface temperature max. +75°C (1500W)
Axial fan, ball bearing Airflow, free flow 45m³/h (50Hz) or 54m³/h (60Hz)
service life 50,000h at +25°C (+77°F)
Connection internal connection terminal 1.5mm² with strain relief,
clamping torque 0.8Nm max.
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Note other voltages on request

Examples of connection

Heater Thermostat Heater

NT 31-F (NC)
950W~1500W 200W~750W

30
20 40

10 50
124
116
165
157

0 60

°C
Heating

L1 N1 L2 N2

L1 N1 L2 N2

95
95 108
132 L1 N1
AC AC
N1 L2
32 90 108
B21

Art No. (230V) Art No. (120V) Art No. (120V&230V) Heating capacity¹ Dimensions Weight (approx.)
124

860223 860232 860314 200W 108 x 90 x 124mm 0.99kg

860224 860233 860315 250W 108 x 90 x 124mm 0.99kg
L1 N1 L2 N2

Air intake
860225 860234 860316 300W 108 x 90 x 124mm 0.99kg
Back view
Topview
860226 860235 860317 400W 108 x 90 x 124mm 0.99kg
860227 860236 860318 750W 108 x 90 x 124mm 0.99kg
860228 860237 860319 950W 108 x 90 x 165mm 1.60kg
860229 860238 860320 1000W 108 x 90 x 165mm 1.60kg
Air Outlet 860230 860239 860321 1200W 108 x 90 x 165mm 1.60kg
860231 860240 860322 1500W 108 x 90 x 165mm 1.60kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Hazardous Area Heater

CREx 020 | 50W to 400W > Large convection surface

> Clip fixing
> Ready for use
> Maintenance free

Compact convection heater for use in areas with explosion hazard for prevention of formation of condensation,
temperature fluctuations and for protection against frost in transmitter housings, switch cabinets and measuring
equipment.

Technical Data
CREx 020
Heating element high performance cartridge
Heater body aluminium profile, silver anodised
Connection Si HF-JZ 3 x 0.5mm² cable, length 1m
Connection PE 4mm²
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (connection on bottom)
Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP65/I(earthed)

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

118

Clip can alternatively

be fixed on long side

69
L

Thermostat REx 011

Heating
Art. No. Heating capacity Operating voltage Length (L) Weight (approx.) B12
02010.0-00 50W 230-240VAC 150mm 1.3kg
02011.0-00 100W 230-240VAC 180mm 1.5kg
02012.0-00 150W 230-240VAC 180mm 1.5kg
02013.0-00 400W 230-240VAC 180mm 1.5kg
02010.0-01 50W 110-120VAC 150mm 1.3kg
02011.0-01 100W 110-120VAC 180mm 1.5kg
02012.0-01 150W 110-120VAC 180mm 1.5kg
02013.0-01 400W 110-120VAC 180mm 1.5kg

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Ventilating
Fan Filter

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD.
www.china-natural.com
 Fan Filter

NTL-F120: Exit Filter • Beautiful deign with brand display mark

NTL-FF120: Filter Fan • Screw Fixing type
• Easy to open cover and fast change mat inside
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FF120
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 50,000h
fan body aluminium, rotor metal
Connection 2 stranded wires, 300mm
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 92 x 92mm
Mounting frame Screw Fixing Type, Easy to open the cover.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1,moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70°C (-40 to +158°F)

103.00
Operating/Storage humidity max. 90% RH (non-condensing)
82.50
71.20
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
Ventilating

Airflow Direction "In": Fan Filter NTL-FF120 (The airflow can be customer made)
103.00
71.20
82.50

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
860204 AC 230V, 50/60Hz 39/48m³/h 32/41m³/h 14W
C1 860205 AC 110V, 50/60Hz 39/48m³/h 32/41m³/h 11W

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-F120

Art. No. Operating voltage Air outlet Depth in enclosure
860206 - air-flap outlet technology 24mm

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter

NTL-F152: Exit Filter • Beautiful deign with brand display mark

NTL-FF152: Filter Fan • Screw Fixing type
• Easy to open cover and fast change mat inside
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic
components.The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and
then outside cooler air can come into enclosure . The resulting airflow prevents formation of localised hot pockets in
installations and protects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow.
Aratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard
installation with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure
(airflow direction"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FF152
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 37,000 h
fan body aluminium, rotor metal
Connection 2 stranded wires, 160mm
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 125 x 125mm
Mounting frame Screw Fixing Type, Easy to open the cover1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70°C (-40 to +158°F)

148.27 24.00
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
148.27

Ventilating
Airflow Direction "In": Fan Filter NTL-FF152 (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
860207 AC 230V, 50/60Hz 138/162m³/h 100/120m³/h 22W
131.00 860208 AC 110V, 50/60Hz 138/162m³/h 100/120m³/h 18W C2
105.00

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .
105.00
131.00

Airflow Direction "In": Exit Filter NTL-F152

Art. No. Operating voltage Air outlet Depth in enclosure
860209 - air-flap outlet technology 24mm

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter

NTL-F204: Exit Filter • Beautiful deign with brand display mark

NTL-FF204: Filter Fan • Screw Fixing type
• Easy to open cover and fast change mat inside
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FF204
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 65,000h
199.97 24.00
fan body aluminium, rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 177 x 177mm
203.97

Mounting frame Screw Fixing Type, Easy to open the cover1.

Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
186.70 Operating temperature 50 Hz: -25 to +50°C (-13 to +122°F)
105.00
90.60 60 Hz: -25 to +70°C (-13 to +158°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
105.00
186.70

Note other voltages on request

Ventilating

Airflow Direction "In": Fan Filter NTL-FF204 (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
33.00

C3 860210 AC 230V, 50/60Hz 200m³/h 150m³/h 33W

174.50 33.00

860211 AC 110V, 50/60Hz 204m³/h 187m³/h 38W

105.00
171.18
174.50

105.00

174.50

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
118.99

118.99

Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-F204

Art. No. Operating voltage Air outlet Depth in enclosure
860212 - air-flap outlet technology 24mm

Etra frame can match with NTL-FF204

Art. No. Function

861001 861001 Protect from Air leakage, offer wind gathering, can be suitable for different sizes of fan installation

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter

NTL-F255: Exit Filter • Beautiful deign with brand display mark

NTL-FF255: Filter Fan • Screw Fixing type
• Easy to open cover and fast change mat inside
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FF255
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 56,000h
253.47 24.00 rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 223 x 223mm
253.47

Mounting frame Screw Fixing Type, Easy to open the cover1.

Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
236.20
self-extinguishing class F1, moisture resistant to 100% RH, reusable
183.00
162.00 Operating temperature -25 to +65°C (-13 to +149°F)
153.00
90.50
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 75% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
105.25
134.00
153.00
212.00
236.20

Ventilating
Airflow Direction "In": Fan Filter NTL-FF255 (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
33.00

2.00

224.00 33.00 183.00 860213 AC 230V, 50/60Hz 380m³/h 310m³/h 64W C4

134.00 860214 AC 110V, 50/60Hz 400m³/h 350m³/h 81W
.30
224.00

224.00

105.25
162.00
50
Φ1

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-F255

Art. No. Operating voltage Air outlet Depth in enclosure
860215 - air-flap outlet technology 24mm

Etra frame can match with NTL-FF255

Art. No. Function

861002 861002 Protect from Air leakage, offer wind gathering, can be suitable for different sizes of fan installation

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter

NTL-F323: Exit Filter • Beautiful deign with brand display mark

NTL-FF323: Filter Fan • Screw Fixing type
• Easy to open cover and fast change mat inside
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FF323
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 56,000h
319.97 24.00
rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 291 x 291mm
319.97

Mounting frame Screw Fixing Type, Easy to open the cover1.

Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
302.70
246.00
183.85 Operating temperature 50 Hz: -25 to +55°C (-13 to +131°F)
166.50
161.50 60 Hz: -25 to +35°C (-13 to +95°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 75% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
106.50
166.50
213.00
246.50
302.70

Note other voltages on request

Ventilating

Airflow Direction "In": Fan Filter NTL-FF323 (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
35.00

35.00

C5
290.50

166.00
860216 AC 230V, 50/60Hz 480m³/h 420m³/h 95W
111.00

860217 AC 110V, 50/60Hz 510m³/h 450m³/h 90W

166.00
Φ200.00
166.00
290.50

232.00

222.00

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-F323

Art. No. Operating voltage Air outlet Depth in enclosure
860218 - air-flap outlet technology 24mm

Etra frame can match with NTL-FF323

Art. No. Function

861003 861003 Protect from Air leakage, offer wind gathering, can be suitable for different sizes of fan installation

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter IP54 Buckle Lock Door Type

NTL-FL120: Exit Filter • New air-flap outlet technology for high airflow
NTL-FFL120: Filter Fan • Easy mounting
• Protection type test/Environmental rating by independent testing institutes
• Standard enclosure cut-out sizes (5 sizes)
• One filter mat

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL120
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 50,000h
fan body aluminium, rotor metal
Connection 2 stranded wires, 300mm
Casing, hood, flaps New ABS confirm to RoHS
Enclosure cut-out 92 x 92+1mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1-4mm).
Additional use of screws possible if needed1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1,moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
21.21

Protection type/Protection class IP54 / I (earthed)

Note other voltages on request
120
¹ Drilling marks for screw mounting are indicated on mounting frame.
Ventilating

Airflow Direction "In": Fan Filter NTL-FFL120

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption Weight (approx.)
862079 AC 230V, 50/60Hz 19m³/h 13m³/h 12W 0.6kg
119.78

862084 AC 110V, 50/60Hz 23m³/h 16m³/h 11W 0.6kg

C9

Airflow Direction "In": Exit Filter NTL-FL120

Art. No. Operating voltage Air outlet Depth in enclosure Weight (approx.)
862074 - air-flap outlet technology 29mm 0.2kg

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
26.1

Please inquiry to us by email, we will offer to you by email: [email protected] .

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter

NTL-FL152: Exit Filter • New air-flap outlet technology for high airflow
NTL-FFL152: Filter Fan • Easy mounting
• Protection type test/Environmental rating by independent testing institutes
• Standard enclosure cut-out sizes (5 sizes)
• One filter mat

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL152
Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 37,000 h
fan body aluminium, rotor metal
Connection 2 stranded wires, 160mm
Casing, hood, flaps New ABS confirm to RoHS
Enclosure cut-out 124 x 124+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1-4mm).
Additional use of screws possible if needed1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
20.97

Protection type/Protection class IP54 / I (earthed)

Note other voltages on request
151.4
¹ Drilling marks for screw mounting are indicated on mounting frame.

Ventilating
Airflow Direction "In": Fan Filter NTL-FFL152
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption Weight (approx.)
862080 AC 230V, 50/60Hz 52m³/h 42m³/h 19W 0.8kg
152.03

862085 AC 110V, 50/60Hz 62m³/h 51m³/h 18W 0.8kg

C10

Airflow Direction "In": Exit Filter NTL-FL152

Art. No. Operating voltage Air outlet Depth in enclosure Weight (approx.)
862075 - air-flap outlet technology 35mm 0.3kg

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
26.1

Please inquiry to us by email, we will offer to you by email: [email protected] .

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter IP54 Buckle Lock Door Type

NTL-FL204: Exit Filter • New air-flap outlet technology for high airflow
NTL-FFL204: Filter Fan • Easy mounting
• Protection type test/Environmental rating by independent testing institutes
• Standard enclosure cut-out sizes (5 sizes)
• One filter mat

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL204
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 65,000h
fan body aluminium, rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps New ABS confirm to RoHS
Enclosure cut-out 176 x 176+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1-4mm).
Additional use of screws possible if needed1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating temperature 50 Hz: -25 to +50°C (-13 to +122°F)
60 Hz: -25 to +70°C (-13 to +158°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
23.09

Note other voltages on request

203.5
Ventilating

¹ Drilling marks for screw mounting are indicated on mounting frame.

Airflow Direction "In": Fan Filter NTL-FFL204

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption Weight (approx.)
C11
862081 AC 230V, 50/60Hz 170m³/h 123m³/h 45W 1.6kg
203.5

862086 AC 110V, 50/60Hz 204m³/h 187m³/h 38W 1.6kg

Airflow Direction "In": Exit Filter NTL-FL204

Art. No. Operating voltage Air outlet Depth in enclosure Weight (approx.)
862076 - air-flap outlet technology 43mm 0.4kg
44.5

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter IP54 Buckle Lock Door Type

NTL-FL255: Exit Filter • New air-flap outlet technology for high airflow
NTL-FFL255: Filter Fan • Easy mounting
• Protection type test/Environmental rating by independent testing institutes
• Standard enclosure cut-out sizes (5 sizes)
• One filter mat

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL255
Axial fan, ball bearing service life L10 at +40 °C (+104°F): min. 56,000h
rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps New ABS confirm to RoHS
Enclosure cut-out 223 x 223+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1-4mm).
Additional use of screws possible if needed1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating temperature -25 to +65°C (-13 to +149°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 75% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
23.5

¹ Drilling marks for screw mounting are indicated on mounting frame.

Ventilating
254.5

Airflow Direction "In": Fan Filter NTL-FFL255

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption Weight (approx.)
C12
862082 AC 230V, 50/60Hz 305m³/h 210m³/h 64W 2.4kg
254.5

862087 AC 110V, 50/60Hz 332m³/h 293m³/h 81W 2.4kg

Airflow Direction "In": Exit Filter NTL-FL255

Art. No. Operating voltage Air outlet Depth in enclosure Weight (approx.)
862077 - air-flap outlet technology 46mm 0.6kg

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
49.5

Please inquiry to us by email, we will offer to you by email: [email protected] .

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter IP54 Buckle Lock Door Type

NTL-FL323: Exit Filter • New air-flap outlet technology for high airflow
NTL-FFL323: Filter Fan • Easy mounting
• Protection type test/Environmental rating by independent testing institutes
• Standard enclosure cut-out sizes (5 sizes)
• One filter mat

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL323
Axial fan, ball bearing service life L10 at +40 °C (+104°F): min. 56,000h
rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps New ABS confirm to RoHS
Enclosure cut-out 291 x 291+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1-4mm).
Additional use of screws possible if needed1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating temperature 50 Hz: -25 to +55°C (-13 to +131°F)
60 Hz: -25 to +35°C (-13 to +95°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 75% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
23.5
Ventilating

323 ¹ Drilling marks for screw mounting are indicated on mounting frame.

Airflow Direction "In": Fan Filter NTL-FFL323

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption Weight (approx.)
C13
862083 AC 230V, 50/60Hz 433m³/h 373m³/h 95W 3.1kg
323

862088 AC 110V, 50/60Hz 394m³/h 339m³/h 90W 3.1kg

Airflow Direction "In": Exit Filter NTL-FL323

Art. No. Operating voltage Air outlet Depth in enclosure Weight (approx.)
862078 - air-flap outlet technology 50mm 1.0kg

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
49.5

Please inquiry to us by email, we will offer to you by email: [email protected] .

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Slide Type Fan Filter

NTL-FL92: Exit Filter • Slide opening function for change mat inside
NTL-FFL92: Filter Fan • Filter cover will not fall off when slide opening the cover.
• Fast Fixing with clips for different size thickness of cabinet and enclosure,
no need screw fixing
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL92
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 50,000h
fan body aluminium, rotor metal
Connection 2 stranded wires, 300mm
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 92 x 92mm
Mounting frame Fast Fixing with clips for different size thickness of cabinet and enclosure, no
need screw fixing
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1,moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
105.55
26.00 Note other voltages on request

Ventilating
Airflow Direction "In": Fan Filter NTL-FFL92 (The airflow can be customer made)
106.15

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
C6
861627 AC 230V, 50/60Hz 39/48m³/h 32/41m³/h 14W
861659 AC 110V, 50/60Hz 39/48m³/h 32/41m³/h 11W

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-FL92

Art. No. Operating voltage Air outlet Depth in enclosure
861616 - air-flap outlet technology 26mm

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Slide Type Fan Filter

NTL-FL124: Exit Filter • Slide opening function for change mat inside
NTL-FFL124: Filter Fan • Filter cover will not fall off when slide opening the cover.
• Fast Fixing with clips for different size thickness of cabinet and enclosure,
no need screw fixing
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL124
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 37,000 h
fan body aluminium, rotor metal
Connection 2 stranded wires, 160mm
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 125 x 125mm
Mounting frame Fast Fixing with clips for different size thickness of cabinet and enclosure, no
need screw fixing
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
150.72 Operating/Storage temperature -40 to +70°C (-40 to +158°F)
32.10
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
Ventilating

150.44

Airflow Direction "In": Fan Filter NTL-FFL124 (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
C7
861629 AC 230V, 50/60Hz 138/162m³/h 100/120m³/h 22W
861661 AC 110V, 50/60Hz 138/162m³/h 100/120m³/h 18W

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-FL124

Art. No. Operating voltage Air outlet Depth in enclosure
861617 - air-flap outlet technology 32mm

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Slide Type Fan Filter

NTL-FL223: Exit Filter • Slide opening function for change mat inside
NTL-FFL223: Filter Fan • Filter cover will not fall off when slide opening the cover.
• Fast Fixing with clips for different size thickness of cabinet and enclosure,
no need screw fixing
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FFL223
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 56,000h
rotor metal
Connection 3-pole clamp for 2.5mm², clamping torque 0.8Nm max.
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 223 x 223mm
Mounting frame Fast Fixing with clips for different size thickness of cabinet and enclosure, no
need screw fixing
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
249.88 Filter material synthetic fibre with progressive construction, temperature resistant to +100°C,
35.30
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating temperature -25 to +65°C (-13 to +149°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 75% RH (non-condensing)
248.22

Protection type/Protection class IP54 / I (earthed)

Ventilating
Note other voltages on request

Airflow Direction "In": Fan Filter NTL-FFL223 (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption C8
860213 AC 230V, 50/60Hz 380m³/h 310m³/h 64W
860214 AC 110V, 50/60Hz 400m³/h 350m³/h 81W

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .

Airflow Direction "In": Exit Filter NTL-FL223

Art. No. Operating voltage Air outlet Depth in enclosure
860215 - air-flap outlet technology 24mm

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter with Rain-Resistance Hood

NTL-F152-W: Exit Filter • Beautiful deign with brand display mark

NTL-FF152-W: Filter Fan • Screw Fixing type
• Easy to open cover and fast change mat inside
• Conform to CE-EMC, CE-LVD
• Can offer IP54 or IP55 to choose, use indoor and outdoor
• Normal color is RAL 7035, also can be customer made for color with MOQ
• Same Size Filter can offer different Airflow Volumn requirement

Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.
The interior temperature of an enclosure can be reduced by expelling heated internal air to outside and then outside
cooler air can come into enclosure. The resulting airflow prevents formation of localised hot pockets in installations
andprotects electronic components from overheating.

The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A
ratchet mechanism is used for mounting and provides high stability and tightness. The system is a standard installation
with a filter fan in the higher part of the enclosure which ensures that hot air come out from enclosure (airflow direction
"Out"). This system consists of a filter fan and exit filter.

Technical Data
NTL-FF152-W
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 37,000 h
fan body aluminium, rotor metal
Connection 2 stranded wires, 160mm
Casing, hood, flaps plastic according to RoHS
Enclosure cut-out 125 x 125mm
Mounting frame Screw Fixing Type, Easy to open the cover1.
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,temperature resistant to +100°C,
self-extinguishing class F1, moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70°C (-40 to +158°F)

148.27 24.00
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP54 / I (earthed)
Note other voltages on request
148.27

Ventilating
Airflow Direction "In": Fan Filter NTL-FF152-W (The airflow can be customer made)
Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption
862236 AC 230V, 50/60Hz 138/162m³/h 100/120m³/h 22W
131.00 862237 AC 110V, 50/60Hz 138/162m³/h 100/120m³/h 18W C2
105.00

Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No. here not show.
Please inquiry to us by email, we will offer to you by email: [email protected] .
105.00
131.00

Airflow Direction "In": Exit Filter NTL-F152-W

Art. No. Operating voltage Air outlet Depth in enclosure
862234 - air-flap outlet technology 24mm

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Exit Filter with Rain-Resistance Hood
NTL-F125-W
Time-saving assembly and maintenance
Cut-Out Size: 125*125mm Natural's fan filters are easily installed by one person from outside the cabinet.
1.) Make cut-out in the cabinet wall. The cut edge of the cabinet opening should be free of dirt, filings and grease. A
template for the enclosure cut-out is included in the delivery of the fan filter.
2.) Remove protective film from the sealing strips on the mounting frame. Press mounting frame into the
cabinet opening. The frame stays permanently in the cabinet. (For size 176mm and up we recommend additional screw
fixing.)
3.) Electrically connect the axial fan using the clip connectors. Push the unit into the mounting frame.
Fix using screws.
4.) Insert the filter mat in the hood. Clip on. Finished.
Changing the filter mat or fan is quickly done by one person. To change the filter mat simply remove the filter hood,
insert the new mat and snap the hood back again. No tools required. Maintenance of the fan can easily be done without
removing the mounting frame (2).

TECHNICAL DRAWINGS
50 89 209
40 63 157
35 66 129
97°

125°

176°
134

226
170
Ventilating & Lighting & Accerries

DRILLING TEMPLATE FOR MOUNTING FRAME

188mm
137mm
109mm
109mm

188mm
137mm

C7
Exit Filter with Rain-Resistance Hood NTL-F125-W
Art. No. Depth in enclosure Enclosure cut-out Weight (approx.) Filter mat
862771 16mm 125 x 125mm + 0.4 0.4kg G4 acc. to DIN EN 779, filtering degree 94%

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan Filter with Rain-Resistance Hood

NTL-FF125-W: With Fan > Very low noise

> Minimal depth in enclosure
Cut-Out Size: 125*125mm
> Functional design
> Time-saving installation
> UV resistant

Fan filters are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be
reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air
flow prevents formation of localised hot pockets and protects the electronic components from overheating. These filter
fans are intended for indoor use. The plastic used for the hood is highly UV light resistant.

Technical Data
NTL-F125-W, NTL-FF125-W
Axial fan, ball bearing service life 50,000h at +25°C (+77°F), 65% RH fan body aluminium,
rotor plastic
Connection 2 wires with pressure clamps 2.5mm², length 100mm
Casing (filter fan and exit filter) plastic according to UL94 V-0, light grey
Hood (filter fan and exit filter) plastic according to UL94 V-0, light grey; UV light resistant according to
UL746C (f1)
Mounting frame with double-sided industrial adhesive band for fixing to the outside of
enclosure; certain operating circumstances can make the additional use of
screws necessary (see drilling template); a template for the enclosure cut-out
is included in the delivery of the filter fans
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction,
temperature resistant to +100°C, self-extinguishing class F1,
moisture resistant to 100% RH, reusable - cleaning by washing or vacuuming
Operating/Storage temperature -10 to +70°C (+14 to +158°F) / -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Enclosure cut-out 01800.1-00 / 01800.1-01: 125 x 125mm + 0.4

Ventilating & Lighting & Accerries

Protection class IP55 / I (earthed)

Special features
> The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet.
> Functional design of the intake and exit fan hoods very effectively prevents direct intrusion of falling water and dust.
The advantage is that the filter mat does not get so quickly contaminated with dirt and thus does not need to
be exchanged so often.
> The air channeling makes the fan filter particularly quiet in operation.
> Functional and modern design enables time-saving assembly and maintenance.
> The direction of air flow can easily be switched by reversing the axial fan (sizes 1 to 3).
> EMC versions and other voltages on request.
C6

Art. No. Operating voltage Air volume, free flow Air volume with exit filter Power consumption Weight (approx.)
862772 230VAC, 50Hz 80m³/h 60m³/h 20W 0.76kg
862773 120VAC, 50Hz 80m³/h 60m³/h 20W 0.76kg
862774 380VAC, 50Hz 80m³/h 60m³/h 20W 0.76kg
862775 120&230VAC, 50Hz 80m³/h 60m³/h 20W 0.76kg
862776 12VDC, 50Hz 80m³/h 60m³/h 12W 0.56kg
862777 24VDC, 50Hz 80m³/h 60m³/h 15W 0.56kg
862778 48VDC, 50Hz 80m³/h 60m³/h 20W 0.56kg
Enclosure air-conditioning using a fan filter
and exit filter

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Accessories
Filter, Lamp, Transparent Protection Window Hood

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD.
www.china-natural.com
 Lamp

LED 025 • Wide voltage range

• Integrated power unit
• Long-lived and maintenance-free by LED technology
• Daisy chain
• On/off switch
• Magnet, screw

The lamp series LED 025 is suitable for all types of panels and enclosures, especially where space is at a premium.
The lamps have a very long service life thanks to the use of LED technology. Three different fixing options provide more
flexibility for installation. The power output allows up to 10 lamps to be connected to each other (12VDC versions up to
5 lamps). Both the power input and output connectors snap lock into their sockets. With the
integrated power unit and the plugs the lamp can quickly be connected.

Technical Data
LED 025
Power consumption max. 5W
Luminosity 400Lm at 120° (1,200Lm at 360° or equivalent 95W light bulb)
Lamp type LED, angle of radiation 120°
light color: daylight, color temperature: 6,000K to 7,000K
Service life 60,000h at +20°C (+68°F)
Connection 2-pole connector with snap lock
AC: max. 2.5A / 240VAC, color: white
DC: max. 2.5A / 60VDC, color: blue
Mounting magnet fixing or screw fixing (M5), clip fixing (M6),
torque 2Nm max.
Casing plastic, transparent
Dimensions see drawings
Weight 0.2kg
Operating/Storage temperature -30 to +60°C (-22 to +140°F) / -40 to +85°C (-40 to +185°F)
Operating/Storage humidty max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)

Mounting options: The lamps are available with magnet fixing for easy positioning in any steel cabinet or enclosure.
A classic is the LED 025 with screw fixing. The clip holders exclusively designed for clip fixing of the LED 025 can be
positioned anywhere in the cabinet by simply screwing the holders to the cabinet wall. The lamp is snapped into the clip
Accessories

holders and can be turned in both directions. With a total rotation angle of 180° it provides perfect illumination within
the cabinet or enclosure.

Note: The lamp must not be used for household lighting.

351

250

351

325

D1
Φ32 Φ32 Φ32 Φ32 Φ32 Φ32
9.75 9.75
39

47.3
41
34

36

42

52 52
40 40

Art. No. Fixing type Switch Operating voltage

02540.0-00 Magnet fixing on/off light switch 100-240VAC, 50/60Hz (min. 65VAC, max. 265VAC)
02540.0-01 Screw fixing on/off light switch 100-240VAC, 50/60Hz (min. 65VAC, max. 265VAC)
¹ approx. 5 min. fixed switch-on duration

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Lamp

LED 025 ACCESSORIES

Connectors and cables for electrical connection are not included in the delivery of the LED 025. These parts can be
ordered separately. Sets, consisting of lamp and accessories, are available on request.

CONNECTION CABLE WITH FEMALE CONNECTOR AND OPEN END

Art. No. Model Length Voltage type Use for
244356 connection cable 2 x 1.5mm² with female connector 2.0m AC power input
244357 connection cable 2 x AWG 15 with female connector 2.0m AC power input

EXTENSION CABLE WITH 2 CONNECTORS FOR DAISY CHAIN CONNECTION

Art. No. Model Length Voltage type Use for
244358 extension cable 2 x 1.5mm² with 2 connectors 1.0m AC daisy chain
244359 extension cable 2 x AWG 15 with 2 connectors 1.0m AC daisy chain

FEMALE / MALE CONNECTORS

Art. No. Model Color Voltage type Use for
264057 female connector white AC power input
264058 male connector white AC power input

CONNECTION EXAMPLE

44 351 44

This illustration shows the LED 025 lamp in a daisy chain application. The lamps are conveniently connected via quick
connection plugs – up to 10 (5) lamps max. can be daisy-chained this way. The snap lock connectors ensure a stable
electrical connection even if subjected to heavy vibration. The connection example shows a 230VAC application, using
the following cables: connection cable with female connector, Art. No. 244356 (1); daisy chain extension cable with 2
connectors, Art. No. 244358 (2).

Female/male connectors are also available to assemble cables in non-standard lengths.

Accessories
D2

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Cabinet LED Lamp-New Fast Wiring Type

LED 025-C • Wide voltage range

• Integrated power unit
• Long-lived and maintenance-free by LED technology
• Daisy chain
• On/off switch
• Magnet, screw

The lamp series LED 025-C is suitable for all types of panels and enclosures, especially where space is at a premium.
The lamps have a very long service life thanks to the use of LED technology. Three different fixing options provide more
flexibility for installation. The power output allows up to 5 lamps to be connected to each other. Both the power input and
output connectors snap lock into their sockets. With the integrated power unit and the plugs the lamp can quickly be connected.

Technical Data
LED 025-C
Power consumption max. 5W
Luminosity 400Lm at 120° (1,200Lm at 360° or equivalent 95W light bulb)
Lamp type LED, angle of radiation 120°
light color: daylight, color temperature: 6,000K to 7,000K
Service life 60,000h at +20°C (+68°F)
Connection 2-pole connector with snap lock
AC: max. 2.5A / 240VAC, color: white
DC: max. 2.5A / 60VDC, color: blue
Mounting magnet fixing or screw fixing (M5), clip fixing (M6),
torque 2Nm max.
Casing plastic, transparent
Dimensions see drawings
Weight 0.2kg
Operating/Storage temperature -30 to +60°C (-22 to +140°F) / -40 to +85°C (-40 to +185°F)
Operating/Storage humidty max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)

Mounting options: The lamps are available with magnet fixing for easy positioning in any steel cabinet or enclosure.
A classic is the LED 025-C with screw fixing. The clip holders exclusively designed for clip fixing of the LED 025-C can
be positioned anywhere in the cabinet by simply screwing the holders to the cabinet wall. The lamp is snapped into the clip
Accessories

holders and can be turned in both directions. With a total rotation angle of 180° it provides perfect illumination within
the cabinet or enclosure.

Note: The lamp must not be used for household lighting.

351

250

351

325

D1 Art. No. Fixing type Switch Operating voltage

862769 Magnet fixing on/off light switch 100-240VAC, 50/60Hz (min. 65VAC, max. 265VAC)
862770 Screw fixing on/off light switch 100-240VAC, 50/60Hz (min. 65VAC, max. 265VAC)
¹ approx. 5 min. fixed switch-on duration

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Door Switch

DS 013 > Adjustable positioning without tools

> High switching capacity
> Double strain relief
> Different cladding diameters
> Suitable for lamp LED 025

The door switch monitors the position of cabinet doors and is available in three versions. For example, it can be used for
switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version with change-over
contact (CO) can be used as a normally closed and/or normally open contact. The wide mechanical adjustment range
of the door switch DS 013 offers versatile application areas: the housing is adjustable within a 35mm range, while the
screw flange with a slotted hole offers an additional 21 mm. The switching travel of the switch itself is another 8mm.

Technical Data
DS 013
Max. switching capacity 120-250VAC/DC, 15A(120V), 8A(250VAC)
Service life VDE: > 10,000 cycles / UL: > 6,000 cycles
Connection 4-pole clamp with strain relief, clamping torque 0.5Nm max.
Mounting screw fixing (M5)
Casing plastic according to UL94 V-0, grey/black
Fast Wiring Connector,
Dimensions 87 x 64 x 30mm
just press the connector,
Weight approx. 50g
then insert the cable
Operating / Storage temperature variable
into the hole, no need
Operating / Storage humidity -20 to +85°C (-4 to +185°F)
crews
Protection type max. 90% RH (non-condensing)

Connection Diagrams

CO NC NO
Ventilating & Lighting & Accerries

2 1 4 2 1 1

N N M N
L L L

C9
29.65
Art. No. Model Suitable wire
01350.0-00 change-over (CO) Cable round, stranded wire (with wire end ferrule) 0.75mm² to 1mm²
86.24 01351.0-00 normally closed (NC) Cable round, stranded wire (with wire end ferrule) 0.75mm² to 1.5mm²
01352.0-00 normally open (NO) Cable round, stranded wire (with wire end ferrule) 0.75mm² to 1.5mm²
51.00

49.96 63.92

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Airflow Monitor

LC 013 / LCF 013 > Mechanical switch contact

> Versatile fields of application
> Small size
> Easy to connect

The airflow monitor (NC/NO) is designed to indicate the loss of air movement of a fan or filter fan. The contact
detects the loss of air movement caused by fan failure or blocked filter media regardless of direction of air. Its simple
mechanical operation makes is a viable alternative to electronic monitoring systems.

Application:
The LC 013 is used as a signal contact to monitor fans or filter fans in stationary, self-contained Protection Class I
enclosures. It can be connected to monitoring systems with remote control or can directly switch alarm devices, such as
LED’s or signal lamps. Loads with capacities exceeding the indicated switching capacity must be switched via a relay, e.g.
our electronic relay SM 010. The airflow monitor with NC contact closes upon loss of air movement, i.e. it indicates fan
failure (e.g. red signal lamp). The NO contact closes when fan is in operation and serves as optical function display (e.g.
green signal lamp).

Technical Data
LC 013 / LCF 013
Contact type reed / magnet contact
Normally Closed (NC) switch contact open when air is flowing
Normally Open (NO) switch contact closed when air is flowing
Max. switching voltage NC: 240VDC (UL), 240V AC/DC (VDE) / NO: 60VDC
Max.switching current NC: DC 500mA / NO: DC 170mA
Max. switching capacity 10W (resistive load)
Switching threshold of airflow velocity >2.5m/s (hysteresis:>1m/s)
Max.airflow velocity 50m/s
Contact resistance <370mΩ (with wire)
Max. air humidity 70% RH (not precipitating)
Service life >100,000 cycles

Ventilating & Lighting & Accerries

Connection 2×single strand AWG26, length 500mm, tip of stranded
wire 5mm stripped and tinned (NC:black, NO:blue)
Mounting alternatively integrated integrated in protective grille (see table).
mounting clamp or mounting clip
Casing plastic according to UL94-HB, black
Fitting position bidirectional tab perpendicular to airflow
Operating / Storage temperature -20 to +50°C (-4 to +122°F) / -20 to +80°C (-4 to +176°F)
Protection type IP20

Examples of connection
C8

e.g. Signal Device Mounting clip

4.2
80 x 88 92 x 92 / 120 x 120
Mounting clamp
+
_
7.5 34
Model Art. No. (NC) Art. No. (NO) Dimensions Weight (approx.)
LC 013 01300.0-00 01300.1-00 34×17.5×7.5mm 5g
17.5

LCF 013 01301.0-00 01301.1-00 80×88×10.5mm 20g

LCF 013 01302.0-00 01302.1-00 92×92×10mm 20g
LCF 013 01303.0-00 01303.1-00 120×120×10mm 30g
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Pressure Compensation Device

DA 084 > High degree of protection

> Easy to install

It has become more and more important to provide a protected enclosure environment for valuable and crucial electrical
and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature
variations. The specially designed pressure compensation device DA 084 permits a controlled change in pressure and
avoids the enterring of dust and water. The pressure compensation device is suitable for the use in enclosures and
housings in accordance with DIN EN 62208.

Technical Data
DA 084
Mounting PG 29 thread with union nut
Torque 5Nm (max. 10Nm)
Material plastic according to UL94 V-0, light grey
weather proof and UV light resistant according to UL746C (f1)
Sealing sealing gasket NBR
Air interface approx. 1.5cm²
Dimensions Ø 65.5 x 30.5mm
Fitting position vertical¹
Operating/Storage temperature -45 to +70°C (-49 to +158°F)

¹ Protection type is restricted to IP54 if fitting position of DA 084 is not vertical.

Installation: Make cut-out Ø37+1mm in enclosure wall and mount pressure compensation device with nut. Please
make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure
compensation we recommend to use two devices on opposite sides towards the top of the enclosure.
Ventilating & Lighting & Accerries

30.5
65.6
15.5
Φ37

C13

Art. No. Protection type 1 packing unit Weight (approx.)

08400.0-03 IP55 2 pieces 62g (31g/piece)

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Pressure Compensation Device

DA 284 > High degree of protection

> Waterproof membrane
> Easy to install

Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature
changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the
door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape
the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a
protection degree of IP66 (M12: IP68). Even with a slight overpressure, a waterproof membrane inside the plug allows
the humidity to escape whilst blocking water and dirt from entering the enclosure.

Technical Data
DA 284
Mounting thread M40 x 1.5 or M12 x 1.5 with nut
Torque M40: 5Nm (max. 10Nm), M12: 0.5Nm (max. 1Nm)
Depth in enclosure M40: approx. 16mm, M12: approx. 8mm
Sealing sealing gasket NBR
Material plastic, light grey
Filter waterproof membrane
Dimensions M40: Ø 60 x 37mm, M12: Ø 17 x 17.5mm
Fitting position variable

Installation: Make cut-out Ø 40.5+0.5mm in enclosure wall for size M40 or Ø 12+0.2mm for size M12, and mount
pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel
of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the
top of the enclosure.

37

Ventilating & Lighting & Accerries

19
60
Φ40

C14
Art. No. Protection type 1 packing unit Weight (approx.)
28400.0-01 IP66 (EN 60529) / IPX9K (EN 40050-9) 1 piece 45g

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Electrical Socket

SD 035 > Quickly connected

> Available with or without fuse
> Clip fixing

The DIN rail mounted electrical socket can be quickly fitted and connected in enclosures allowing the use of auxiliary
products such as hand lamps, measuring devices, soldering irons etc. The unit is available with and without fuse and in
many world socket standards.

Technical Data
SD 035
Connection 3 x pressure clamps for stranded and rigid wire 0.5 - 2.5mm²
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 92 x 62 x 48mm
Weight approx. 0.2kg
Fitting position variable
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)

62 48
92

Ventilating & Lighting & Accerries

Connections from mains

Art. No. Nominal current Operating Voltage C16

03504.0-01 15A 125V

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Self-Adhesive Appliance Holder Holder Fix

SF 095 > Direct fixing of small appliances and 35mm DIN rails
> Simple to mount
> Self-adhesive

With Holder Fix small appliances can be mounted in enclosures significantly quicker, easier and more economically
than before, without drilling holes. Mounting DIN rails is a simple matter with Holder Fix. Longer rails are mounted on
several Holder Fix units and joining two rails is also not a problem. Subsequent changes and the mounting of additional
appliances can be carried out with ease – even in confined spaces. Holder Fix is a self-adhesive plastic unit with an
adhesion power which will bear a continuous load of 500g. The high-performance industrial adhesive band is also non-
ageing and designed with safety tolerances.

Technical Data
SF 095
Load 500g after a 24h waiting period¹
Mounting self-adhesive (non-ageing, high-performance adhesive band)
Material plastic according to UL94 V-0
Dimensions 43 x 38 x 14mm
Screw pitch 12.8mm, Ø 3.6mm; for perforated 35mm DIN rails
Operating/Storage temperature -45 to +70°C (-49 to +158°F)

¹ depending on the conditions of use (e.g. surface condition, size of the device to be mounted, etc.) higher loads were
achieved.

Installation: Holder Fix can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except
polyethylene, polypropylene and rubber). The surfaces must be dry, free from dust, oil, separating agents and other
contamination.

Self-adhesive surface Protective film

Ventilating & Lighting & Accerries

Holder Fix SF 095 Holes for screw fixing

Note: When using the Holder Fix as a DIN rail holder, only DIN rails (EN 60715) with perforation 18 x 6.2mm or 18 x 5.2mm
can be used.

Art. No. 1 packing unit Weight (approx.) C12

09510.0-01 5 pieces 60g (12g/pc.)

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Transparent Protection Window Hood

NTL-AG PRODUCT FEATURES

• The high quality polycarbonate (PC) material is used for the high protection grade switch box and control cabinet sealing
surface of all kinds of industrial control. Observation and operation can be carried out when the box body is locked.
• The products are waterproof, dustproof, anti-impact, corrosion resistant, long life, good insulation, beautiful appearance and
so on.

Technical Data
Model Way Size
NTL-AG1002 2 Way 57 x 100 x 28mm

NTL-AG1003 3 Way 75 x 100 x 28mm

NTL-AG1004 4 Way 93 x 100 x 28mm

NTL-AG1006 6 Way 124 x 100 x 28mm

NTL-AG1008 8 Way 160 x 100 x 28mm

NTL-AG1010 10 Way 196 x 95 x 28mm

NTL-AG1012 12 Way 232 x 95 x 28mm

NTL-AG1013 13 Way 250 x 95 x 28mm

NTL-AG1016 16 Way 304 x 95 x 28mm

NTL-AG1018 18 Way 340 x 95 x 28mm

NTL-AG1086 86 Type 107 x 130 x 28mm

2 Way 86 Type
38
88

Φ5.5
100

Φ5.5
66

76

87.5

102
130

41.5
28 57
87.5

28 107

3 Way 6 Way

56
105
Accessories

Φ5.5
Φ5.5
100

66
76

100

66
76

59.50
28 75 113.13
28 124

D3

4 Way 8 Way

74
140

Φ5.50
Φ5.5
100

66
76

100

66

76

77.50
149.5
28 93
28 160

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Transparent Protection Window Hood

NTL-AG PRODUCT FEATURES

• The high quality polycarbonate (PC) material is used for the high protection grade switch box and control cabinet
sealing surface of all kinds of industrial control. Observation and operation can be carried out when the box body is
locked.
• The products are waterproof, dustproof, anti-impact, corrosion resistant, long life, good insulation, beautiful
appearance and so on.

10 Way

176

Φ5.5

95

66
76
2
185.5
28 196

12 Way
213
71

Φ5.5
95

66
76
2
217.5
28 232

13 Way
231
71

Φ5.50
95

66
76
2
239.5
28 250

16 Way
282

Accessories
94

Φ5.50
95

66
76
2

291.5
28 304
D4

18 Way
318
106

Φ5.5
95

66
76
2

327.5
28 340
 Plastic Guard for Fan

NTL-FG • PC or Nylon
• A Class quality
• Offer guard for all kinds size of fan
• Longer using life
• Never rusty

Material and Technology: It is made of low-carbon steel wire or stainless steel wire through cutting, rolling, bending and
welding.
Specification: according to the buleprint and requirement of the customer's.
Characteristic: various mode, beautiful and practical, frim welding,corrosion resistance, durable service.
Purpose: the protectionm hood of blower, air condition, electric engine etc.

Art. No. Model Guard for Fan Size of

861139 NTL-FG80 80 x 80 x 25mm, 80 x 80 x 38mm
861140 NTL-FG92 92 x 92 x 25mm, 92 x 92 x 38mm,
861141 NTL-FG120 120 x 120 x 25mm, 120 x 120 x 38mm
861142 NTL-FG170 172 x 150 x 51mm, Φ172 x 55mm
861143 NTL-FG180 180 x 180 x 65mm
861144 NTL-FG200 200 x 200 x 60mm
861615 NTL-FG225 225 x 225 x 80mm, Φ222 x 60mm

10.00

10.00 10.00
120.40
92
80

120.40
92
80

10.30
10.30

2.00 179.02
171.00
149.80

179.02
Accessories

10.20
10.30

1.90
222.00
200.02

D5
200.02

222.00

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Filter Mat to match with different size filter

NTL-F120M/152M/204M • Normal Type is: G4 , For special requirement, can According to customer
F255M/323M • A quality
• Purify for air
• Easy to change and clean

Art. No. Model Mat Size Match Fan Filter Size

861123 NTL-F120M 86 x 86mm 120 x 120mm filter
861124 NTL-F152M 118 x 118mm 152 x 152mm filter
861125 NTL-F204M 171 x 171mm 204 x 204mm filter
861126 NTL-F255M 223 x 223mm 255 x 255mm filter
861127 NTL-F323M 286 x 286mm 323 x 323mm filter

Accessories
D6

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Documents Pocket

NTL-DP01 • ABS new material according to RoHS

• A class quality
• Holding for documents on cabinet and enclosure
• Easy to install onto cabinet and enclosure

Technical Data
NTL-DP01
Material ABS according to RoHS
Color Similar to RAL 7035, also can be customer-made for the color
277.99 Installation Way Screw mounting or adhesive tape mounting
The weight can carry 5KGS.
41.00

Art. No. Model Size

861147 NTL-DP01 234 x 278 x 40mm
232.49
Accessories

D7

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Filter

NTL-F80B/120B • Simple Filter

• IP40
• ABS Material

Technical Data
NTL-F120B
Material ABS
Scope Room temperature from -10 to 55 degree
Color Black
Dust removal rate 89%
IP Code IP40

A: 125mm C: 10mm Art. No. Model Size

861145 NTL-F80B 80 x 80 x 10mm
861146 NTL-F120B 120 x 120 x 10mm
B: 125mm

D: 105mm F: 4.5mm
E: 120mm

4×Φ5.5mm

Accessories
D8

WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]
 Fan

NA Series Fan • Impeller: PBT Thermoplastic Black, UL94-V0

• Frame: Aluminum Alloy
• Motor: Shaded Pole Induction Motor

Technical Data
Model Voltage Freq. Current Power Speed Noise Air Flow
Number (V) (Hz) (A) (W) (RPM) (dBA) Size
M3/hr CFM
NA8025HA1B 100~125 50/60 0.13 13 2300/2700 27/30 32/39 19/23
NA8025HA2B 200~240 50/60 0.07 13 2300/2700 27/30 32/39 19/23
80×80×25mm
NA8025MA1B 100~125 50/60 0.13 13 1700/2200 22/26 24/32 14/19
NA8025MA2B 200~240 50/60 0.07 13 1700/2200 22/26 24/32 14/19
NA8038HA1B 100~125 50/60 0.14 14 2400/2800 27/30 39/48 28/32
80×80×38mm
NA8038HA2S 200~240 50/60 0.07 14 2400/2800 27/30 39/48 28/32
NA9225HA1S(B) 100~125 50/60 0.14 13 2300/2800 34/40 47/58 28/34
NA9225HA2S(B) 200~240 50/60 0.07 13 2300/2800 34/40 47/58 28/34
92×92×25mm
NA9225MA1S(B) 100~125 50/60 0.14 13 1800/2300 28/35 37/45 22/26
NA9225MA2S(B) 200~240 50/60 0.07 13 1800/2300 28/35 37/45 22/26
NA9238HA1S(B) 100~125 50/60 0.23/0.18 17/13 2350/2750 26/31 66/78 38/46
NA9238HA2S(B) 200~240 50/60 0.10/0.08 17/13 2600/3000 31/35 72/85 38/46
92×92×38mm
NA9238MA1S(B) 100~125 50/60 0.12/0.09 11/8 2200/2500 25/27 63/70 37/41
NA9238MA2S(B) 200~240 50/60 0.07/0.06 9/7 2250/2600 26/28 65/75 37/41
NA11025HA1S(B) 100~125 50/60 0.20 18 2200/2500 34/40 84/100 49/59
NA11025HA2S(B) 200~240 50/60 0.10 18 2200/2500 35/41 84/100 49/59
110×110×25mm
NA11025MA1S(B) 100~125 50/60 0.16 16 1800/2300 30/35 70/84 41/49
NA11025MA2S(B) 200~240 50/60 0.80 16 1800/2300 30/35 70/84 41/49
NA12025HA1S(B) 100~125 50/60 0.25 21 2300/2700 39/42 96/112 57/66
NA12025HA2S(B) 200~240 50/60 0.13 21 2300/2700 39/42 96/112 57/66
120×120×25mm
NA12025MA1S(B) 100~125 50/60 0.16 16 1800/2300 31/36 76/95 45/56
NA12025MA2S(B) 200~240 50/60 0.08 16 1800/2300 31/36 76/95 45/56
NA12038HA1B(S) 100~125 50/60 0.22/0.18 21/18 2600/3000 43/48 138/162 82/95
NA12038HA2B(S) 200~240 50/60 0.14/0.12 21/18 2600/3000 43/48 138/162 82/95 120×120×38mm
NA12038HA3B(S) 380 50/60 0.09/0.07 21/18 2600/3000 39/44 138/162 82/95
NA17050HA1B(S) 100~125 50/60 0.43/0.40 26/28 2650/2950 54/50 299/336 176/198
NA17050HA2B(S) 200~240 50/60 0.23/0.20 26/28 2650/2950 54/50 299/336 176/198 172×150×50mm
NA17050HA3B(S) 380 50/60 0.13/0.11 26/28 2650/2950 54/50 299/336 176/198
NA1725HA1B(S) 100~125 50/60 0.45/0.40 26/28 2650/2950 54/59 299/336 176/198
Accessories

NA1725HA2B(S) 200~240 50/60 0.23/0.20 26/28 2650/2950 54/59 299/336 176/198 172×172×51mm
NA1725HA3B(S) 380 50/60 0.13/0.11 26/28 2650/2950 54/59 299/336 176/198
NA18065HA1B-C 100~125 50/60 0.42 45 2600/3000 63/68 586/671 345/395
180×180×65mm
NA18065HA2B-C 200~240 50/60 0.22 45 2600/3000 63/68 586/671 345/395
D9 NA20060HA1B-W-C 100~125 50/60 0.4 60 2500/2800 60/65 780/890 460/530
NA20060HA2B-W-C 200~240 50/60 0.3 60 2500/2800 60/65 780/890 460/530 200×200×60mm
NA20060HA3B-W-C 380 50/60 0.2 60 2600/2900 60/65 780/890 460/530
NA22060HA1B(S) 100~125 50/60 0.4 60 2650/2950 54/59 900/1000 600/700
NA22060HA2B(S) 200~240 50/60 0.3 60 2650/2950 54/59 900/1000 600/700 220×220×60mm
NA22060HA3B(S) 380 50/60 0.2 60 2650/2950 54/59 900/1000 600/700
NA22580HA2B-C 220 50/60 0.40 80 2300/2600 65/68 1000/1150 588/676
NA22580HA3B 380 50/60 0.20 80 2300/2600 65/68 1000/1150 588/676 225×225×80mm
NA22580HA6B-C 380 50/60 0.21 80 2300/2600 65/68 1000/1150 588/676
NA28080HA1-C 100~125 50/60 1.20 120 2400/2500 65/70 2280/2570 1341/1512
NA28080HA2-C 200~240 50/60 0.55 120 2400/2500 65/70 2280/2570 1341/1512
280×280×80mm
NA28080HA3 380~420 50/60 0.32 120 2400/2500 65/70 2280/2570 1341/1512
NA28080HA6-C 380~420 50/60 0.36 120 2400/2500 65/70 2280/2570 1341/1512

12VDC, 24VDC, 48VDC can be offered too for some models, welcome detail inquiry
WENZHOU NATURAL
AUTOMATION EQUIPMENT CO., LTD. www.china-natural.com Tel: +86-577-62787886 Fax: +86-577-62768368 Mobile: +86-15088970667 [email protected]