DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.

5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4517R5

Antenna Specifications

Electrical Properties
690 - 862 880 - 960 1710 - 2690
Frequency range (MHz)
690 - 820 790 - 862 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
0 - 12 , continuously adjustable , each band
Electrical downtilt (°) 2 - 12 , continuously adjustable
separately
at mid Tilt 13.8 13.8 14.3 16.8 17.0 17.2 17.5
Gain (dBi)
over all Tilts 13.7 ±0.3 13.7 ±0.3 14.1 ±0.5 16.6 ±0.4 16.8 ±0.4 17.1 ±0.4 17.4 ±0.4

Tri-band
Side lobe suppression for first side
> 16 > 16 > 17 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 ±2.0 66 ±2.0 63 ±2.0 63 ±5.0 61 ±5.0 60 ±5.0 60 ±5.0
Vertical 3dB beam width (°) 15.3 ±1.0 13.5 ±1.0 12.0 ±1.0 6.5 ±0.5 6.0 ±0.5 5.2 ±0.3 4.8 ±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
Interband isolation (dB) ≥ 28 (690 - 862 // 1710 - 2690 MHz)
≥ 28 (880 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) > 28 > 28 > 26 > 27 > 27 > 27 > 28
Cross polar ratio (dB) 0° > 25 > 22 > 18 > 17 > 17 > 20 > 19
Max. power per input (W) 300 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.

Mechanical Properties 106

Antenna dimensions (H x W x D) (mm) 1490 x 298 x 150

Packing dimensions (H x W x D) (mm) 1820 x 360 x 230
Antenna weight (kg) 20.8
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 30.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1490
1389

Radome colour Light grey

Operational temperature (℃) -40 .. +65
Frontal: 580 (at 150 km/h)
Wind load (N) Lateral: 250 (at 150 km/h)
Rear side: 695 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 16 ° 2.1 kg 1 (Separate packing)

125
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7 (495) 109-02-08 [email protected] www.bbrc.ru
 DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4517R5

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 6 (motor activated, 12V)
Power consumption (W)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM

Integrated RET S/N:

HWMxxx……r

HWMxxx……y

HWMxxx……rr y

r - Red y - Yellow
r rr

Pattern sample for reference

690 - 862 MHz 880 - 960 MHz 1710 - 2690 MHz

126
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7 (495) 109-02-08 [email protected] www.bbrc.ru