Pressure reducing valves

Pressure reducing valve

Flange- and sandwich construction
• Qmax = 30 l/min
NG6
ISO 4401-03
• pmax = 315 bar
• pN red max = 200 bar

DESCRIPTION FUNCTION APPLICATION

Flange or sandwich type directly operated The spool is held in the home position by the Pressure reducing valves are used for keeping
3-way pressure reducing valve. The valve spring. The connection to the consumer is fully the pressure constant in a consumer, irrespec-
reduces the inlet pressure to a preset out- open. The reduced pressure can be adjusted at tive of pressure fluctuations on the supply side.
put pressure. The integrated pressure relief the adjustment spindle, irrespective of the inlet If several consumers are used, the reduced
function prevents the reduced pressure from pressure. If the reduced pressure increases, pressure can be set individually with the aid if
being exceeded as a result of external forces. it displaces the valve towards the spring. The one pressure control valve for each consumer.
Two types of setting and five pressure stages volume flow at the valve inlet is then throttled, Generally speaking, pressure control valves
are available. A pressure gauge connection is controlling the reduced pressure. If forces are used for reducing a hydraulic pressure to
provided in the reduced connection. A by-pass acting on the consumer allow the reduced a lower level. The integrated pressure relief
non-return valve plate for the flange valve for pressure to be increased above the set value, function obviates the need for any additional
free flow from A to P (B port not drilled) can the spool is displaced until the valve inlet closes pressure relief valve in the reduced pipe. Di-
be ordered separately. In the sandwiches with and the tank port opens. The pressure increase rectly operated pressure reducing valves also
control in A or B line by-pass check valves are is then limited to a low value, controlled by keep the reduced pressure stable, even under
integrated. The flange valve body is painted, the spring. very difficult operating conditions.
the other parts are zinc-nickel coated.

TYPE CODE
A DRV d 6 / #

International mounting interface ISO

Pressure reducing valve
Direct operated
Type list / function
Flange design N
Sandwich design, Pred in P
Sandwich design, Pred in A A
Sandwich design, Pred in B B
Interface NG6
Type of adjustment Key
Control knob D
Cover H
Pressure range pN red 31,5 bar 31,5
63 bar 63
125 bar 125
160 bar 160
200 bar 200
Design-Index (Subject to change)

GENERAL SPECIFICATIONS HYDRAULIC SPECIFICATIONS

Description Direct operated pressure control valve Fluid Mineral oil, other fluid on request
Nominal size NG6 acc. to ISO 4401-03 Contamination efficiency ISO 4406 :1999, class 18/16/13
Construction Flange- or sandwich (Required filtration grade ß 6…10 ≥75)
Mounting 4 mounting holes for zyl. screws M5 or refer to data sheet 1.0-50/2
double ended screws M5 Viscosity range 12 mm2/s…320 mm2/s
Connection Threaded connection plates Fluid temperature -20...+70 °C
Multi-flange subplates Peak pressure pmax = 315 bar
Longitudinal stacking system Tank load in connection T pT max = 50 bar
Ambient temperature -20 ...+50 °C Nominal pressure pN red = 31,5 bar, pN red = 63 bar
Mounting position any pN red = 125 bar, pN red = 160 bar
Fastening torque MD = 5,5 Nm (Quality 8.8) pN red = 200 bar
Weight m = 2,0 kg Opening pressure pö = 0,2 bar
to non-return valve
Volume flow Q = 0…30 l/min

Wandfluh AG Tel. +41 33 672 72 72 E-mail: [email protected] Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 2.2-650E 1/2
CH-3714 Frutigen Edition 21 30
 Pressure reducing valves

CHARACTERISTICS oil viscosity υ = 30 mm2/s

pred = f (Q) Pressure volume flow characteristics pred = f (Q) Pressure volume flow characteristics
(Maximal adjustable pressure) (Minimal adjustable pressure)
∗ Consumption resistance dependent on system
p [bar] p [bar]
250 K0523
25 K0522

200 20
PN red = 200 bar
150 PN red = 160 bar 15
PN red = 31.5/63/125/
100 PN red = 125 bar
10 160/200 bar
∗


50 PN red = 63 bar 5
PN red = 31,5 bar
0 0
30 24 18 12 6 0 6 12 18 24 30 30 24 18 12 6 0 6 12 18 24 30
A  T Q [l/min] P  A A  T Q [l/min] P  A

pred = f (n) Pressure adjustment characteristics ∆p = f (Q) Pressure loss/flow characteristics

[at Q = 0 l/min (static)] over non-return valve
p [bar] p [bar]
250 10
K0521 K0524

PN red = 200 bar

200 PN red = 160 bar
8
150 PN red = 125 bar 6
100 4
PN red = 63 bar
50 2
PN red = 31,5 bar
0 0
0 2 4 6 8 10 12 n [-] 0 6 12 18 24 30 Q [l/min]

TYPES / DIMENSIONS
Flange construction
ADRVdN6 ADRVdN6

A P T B

Sandwich construction
ADRVd6 ADRVdA6 ADRVdB6

A P red TB A P TB APT B ADRVd6

ADRVdA6

A P TB A red P T B APT B red

PARTS LIST

Position Article Description

40 153.1601 Hexagonal nut 0,5D M12

50 246.2117 Zyl. screw M5 x 16 DIN912
60 246.2146 Zyl. screw M5 x 45 DIN912 Spindle not secured against
70 238.2406 Plug VSTI G1/4"-ED unscrewing
90 160.2093 O-Ring ID 9,25 x 1,78
For sandwich red. pressure
100 114.1202 Knob
in B the adjusting parts are
110 154.7100 Cap nut on A-side

ACCESSORIES
Threaded connection plate and multi-flange subplates Reg. 2.9
Technical explanation see data sheet 1.0-100 Bypass non-return valve ADRVP6
A P T B

Wandfluh AG Tel. +41 33 672 72 72 E-mail: [email protected] Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 2.2-650E 2/2
CH-3714 Frutigen Edition 21 30
A P red T B A P TB APT B