COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS

SmartClass™ E1
Service Installation and Maintenance Tester
Key Features • Performs E1 service installation and maintenance in easy-
to-use, lightweight, and rugged form-factor
• Significantly reduces field technician training with Smart
AutoConfiguration (AutoConfig) feature
• Works with PC software—download results for report
preparation
• Provides additional E1 testing with available software
options
• Includes Event Log and Histogram for troubleshooting
• Capable of bidirectional monitoring and troubleshooting
via dual E1 ports
• Offers color graphical user interface (GUI) available in
multiple languages

Applications
E1 The JDSU SmartClass E1 is a handheld field tester for the installation and com-
• Provides terminate, monitor, bridge, missioning of E1 service that offers multiple test modes for E1 signal analysis. An
and local loopback modes economical and easy-to-use point solution, the SmartClass E1 has a Smart
• Provides G.703—2 Mb/s testing AutoConfiguration (AutoConfig) feature and large, easy-to-read color display
• Conducts 2 M (Bulk), n x 64 kb/s BERT that make the lightweight, rugged, battery-operated tester ideal for both service
• Measures performance G.821, G.826, provider and contractor field technicians. It also meets the needs of mobile
and M.2100
operators in the construction of E1 backhaul infrastructure.
• Provides audio monitor (VF drop)
• Provides transmit frequency offset
• Performs VF level and frequency
measurements, VF tone insert
• Measures E1 signal level measurement
• Provides ABCD/Sa monitoring
• Provides round-trip delay
• Offers alarms (defects) and errors
(anomalies) insertion
• Pulse shape (optional)
• Jitter (optional)

Others Pulse shape for extra E1 testing capability

• Offers remote control (optional)

WEBSITE : www.jdsu.com/test
 SMARTCLASS E1

2
Specifications

E1 Circuit Testing Errors (Anomalies) Insert

2M code Single
Interfaces 2M FAS Single, 2, 3, 4
Dual RJ48 ports (port 1 Rx/Tx, port 2 Rx only) 2M MFAS Single, 2
120 balanced RJ48 (by default) 2M CRC Single
120 balanced CF, 75 unbalanced BNC (via adapter cable) BERT pattern slip Single
Line Code AMI, HDB3 E-Bit/REBE Single, Continuous
Tx Timing Internal Bit (TSE) Single-rate 1e-2, 1e-3, 1e-4, 1e-5, 1e-6, 1e-7,
Recovered Multiple 1 to 50
External (via adapter cable on Port 2) Alarms (Defects) Insertion
Tx Frequency Offset ±100 ppm in 1 ppm intervals LOS Continuous
Framing Unframed, PCM31, PCM31C, PCM30, PCM30C Loss of frame (LOF) Continuous
Test Mode Terminate, monitor, bridge, local loopback AIS
2M (Bulk), n x 64 kbps BERT RDI/FAS Dist
AutoConfig for framing and test pattern MF AIS
LED Indicators SYNC, ALARM, ERROR, DATA, LPBK, BATT MF RDI/MFAS dist
Performance Monitoring VF Tests
G.821, G.826, and M.2100 VF level and frequency measurement
ABCD/Sa monitoring VF tone insert 404, 1004, 2713, 2804 Hz,
Round-trip delay –13.0, –3.0, 0.0, 3.0 dBm
Test Patterns VF drop to built-in speaker
All ones, All zeros Pulse Shape (optional)
1:1, 1:3 (1 in 4), 1:4 (1 in 5), 1:7 (1 in 8), Parameter Specification
63 (26-1), 511 (29-1), 2047 (211-1), ITU INV215-1, ITU215-1, ITU Results Pulse shape graph
INV220-1, ITU220-1, ITU INV223-1, ITU223-1, QBF, QRSS, LIVE G.703 mask Pass/Fail
User bit pattern (3 to 32 bits) Pulse width resolution 2.75 ns
User byte pattern (1 to 64 bytes) Rise time resolution 1 ns
Key Results Fall time resolution 1 ns
Loss alarms, LOS seconds Undershoot resolution 1% of nominal level
Code error count, code error rate, timing slips, frame slips, Overshoot resolution 1% of nominal level
LOF alarms, LOF seconds, AIS alarms, AIS seconds, RDI alarms Signal level in [V] base-peak
RDI seconds, MF AIS alarms, MF AIS seconds, MF RDI alarms,
MF RDI seconds
FAS bit error count, FAS bit error rate, FAS word error count,
MFAS word error count, MFAS word error rate, CRC error Count,
CRC error rate, CRC sync loss count
FAS sync loss count, MFAS sync loss count, remote end block
error (E-Bit/REBE), NFAS word, MFAS word, NMFAS word
Si bit, A bit, Sa-bit sequence (Sa4–Sa8)
TSE/bit error count,TSE/bit error rate, block error count
pattern slips, pattern slip seconds
Pattern synchronization loss count, pattern synchronization
loss seconds, round trip delay (µs), elapsed time, time,
date/time-slot Rx byte, time-slot signaling data
 SMARTCLASS E1

3
Specifications

Jitter (optional) Other Software Options

Test Modes Terminal, Monitor, Bridge
Remote Control (optional)
Jitter measurements available Manual Jitter Measurement
Lets the user use command lines to control the tester via serial
Maximum Tolerable Jitter Measurement (MTJ)
interface. Command guide is available with the option.
Fast Maximum Tolerable Jitter Measurement (FMTJ)
Jitter Transfer Measurement (JTF) General Tester
Manual Jitter Measurement
Languages
Rx accuracy 0.05UI or 3%, whichever is greater
English, French, German, Italian, Japanese, Korean, Portuguese,
Rx resolution 1/128UI
Russian, Simplified Chinese, and Spanish
Rx frequency range 20 Hz to 100 kHz
Power
Range of Rx jitter amplitude (UIpp) 16UI
4 AA field-replaceable batteries (NiMH or Alkaline)
Rx clock source Recovered clock
NiMH battery operating (at 25°C) under typical conditions
Tx accuracy 0.03UI or 3%, whichever is greater
provides up to 5 hours of continuous use for E1 application
Tx resolution 1/64UI
and 2 hours of continuous use for Datacom application
Tx frequency range (nominal) 20 Hz to 100 kHz
Supports sleep mode
Range of Tx jitter amplitude (UIpp) 0.1 to 10UI
AC line operation via external adapter
Tx clock source Internal clock
Charging time (at 25°C) under typical conditions for empty to
Maximum Tolerable Jitter Measurement
full charge: with unit OFF up to 5 hours; with unit ON up to
Tx accuracy 0.03UI or 3%, whichever is greater
7 hours
Tx resolution 1/64UI
Permissible Ambient Temperature
Tx frequency range (nominal) 20 Hz to 100 kHz
Nominal range of use 0 to +50°C
Range of Tx jitter amplitude (UIpp) 0.1 to 10UI
Storage and transport –10 to +60°C
Results format Table and graphical
Humidity
Fast Maximum Tolerable Jitter Measurement
Operating humidity 10 to 90%
Tx accuracy 0.03UI or 3%, whichever is greater
Physical
Tx resolution 1/64UI
Size (H x W x D) 230 x 120 x 50 mm
Tx frequency range (nominal) 20 Hz to 100 kHz
Weight, including batteries <1 kg (2 lb)
Range of Tx jitter amplitude (UIpp) 0.1 to 10UI
Display 320 x 240 color display
Results format Table
CE Marked
Jitter Transfer Measurement
Rx accuracy 0.05UI or 3%, whichever is greater
Rx resolution 1/128UI
Rx frequency range 20 Hz to 100 kHz
Tx accuracy 0.03UI or 3%, whichever is greater
Tx resolution 1/64UI
Range of Tx jitter amplitude (UIpp) 0.1 to 5UI
Tx frequency range (nominal) 20 Hz to 100 kHz
Results format Table and graphical
Intrinsic jitter of instrument <0.07UI
Results approximate to ITU-T G.823 and O.171
 SMARTCLASS E1

Ordering Information

Order Number Description Miscellaneous

CC-120101 Large Carrying Bag
CSC-E1-P1 SmartClass E1 Package AC-009801 Large Strand Hook
(No software options included) SCACARCHARGER Car Adapter Charging Kit
CSC-E1-P2 SmartClass E1 Pulse Shape Package ML-21107607 Printed User Manual SC E1 (English)
(Pulse Shape software option included) ML-21121114 Printed SC E1 Remote Control
CSC-E1-P3 SmartClass E1 Jitter Package Reference Guide (English)
(Jitter software option included) Software Options
CSC-E1-P4 SmartClass E1 Complete Package CSC-E1-PS Pulse Shape
(Pulse Shape and Jitter software option included) CSC-E1-JIT Jitter
Accessories included with any package CSC-E1-RC Remote Control
AC power adapter with plug kit (USA, UK, Australia, Europe) Optional Accessories
4 x AA NiMH batteries E1 Cables
CD-ROM (including PC utility, USB driver, and User Guide) K1597 RJ48 to CF Y cable (120 Ω balanced)
1 x RJ48-to-RJ48 cable CB-44995 RJ48 to Dual BNC cable (75 Ω unbalanced)
1 x USB cable CB-0045402 2M External Clock Reference cable
Small carrying bag

Test & Measurement Regional Sales

NORTH AMERICA LATIN AMERICA ASIA PACIFIC EMEA www.jdsu.com/test

TOLL FREE : 1 866 228 3762 TEL : +1 954 688 5660 TEL : +852 2892 0990 TEL : +49 7121 86 2222
FAX : +1 301 353 9216 FAX : +1 954 345 4668 FAX : +852 2892 0770 FAX : +49 7121 86 1222

Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 30162744 000 0609 SMCLASSE1.DS.ACC.TM.AE June 2009