COOLING TECHNOLOGY INSTITUTE

PRICE LIST
Publications

April 2025
 Publications List
A complete set of these Standard Specifications $2.370.00 There is a 20% discount to Members for publications only. Quantity prices
quoted upon request. Prices do not include postage.
Legend Used for Prefixes:
STD ............................................................................. Standard PTB ...................................................... P&T Committee Bulletin
ATC ........................................................................... Test Code PTG................................................... P&T Committee Guideline
BUL .................................................................. General Bulletin WTB .................................... Water Treating Committee Bulletin
ESB ................................................... ES&M Committee Bulletin WTG................................. Water Treating Committee Guideline
ESG ............................................... ES&M Committee Guideline ADM ..................................................................... Administrative

CTI Code Tower Standard Specifications

STD-103 .......... Redwood Lumber Specifications ....... $14.00 ATC-106 ...................Acceptance Test Code ............... $35.00
CTI Grades of Redwood Lumber; allowable grades and grading rules for Mechanical Draft Evaporative Vapor Condensers
for redwood used in industrial towers and Framework Design Data: This code specifies the procedures, apparatus, and instrumentation to
allowable design stresses (wet operating weight) nominal and dressed be used for testing and evaluating the performance of evaporatively
dimensions, wind loading and weight calculations. Revised August cooled, mechanical draft, vapor condensers. Reviewed July 2011
2022

ATC-105 .................. Acceptance Test Code.............. $175.00 ATC-107 ......Test Code for Aircooled Condensers ... $35.00
The February 2019 version of ATC 105 incorporates extensive revisions to
This document details the measured test parameters, instrumentation,
the code language and appendices that obsolete the previous document.
test measurements and data reduction procedure required for
Part I - Test Procedure: methods and instrumentation for testing mechanical
determination of the thermal capability of a dry, air-cooled steam
draft and natural draft cooling towers.
condenser (ACC). July 2011
Part II - Evaluation of results: method for evaluation of the performance of
mechanical draft cooling towers using both characteristic curves and BUL-109 ............. Nomenclature for Industrial ................ N/C
performance curves; natural draft, natural draft-fan assisted cooling towers, Water Cooling Towers
and mechanical draft helper towers using performance curves. The results are
expressed in terms of water cooling capacity. Recommended terms and definitions for use in describing tower
Part III - Appendices: example evaluations of mechanical draft, natural draft, components, designs and performance; includes abbreviations and
fan-assisted and helper cooling towers; various support information on letter symbols. Revised July 2022
requirements to perform and analyze tests and an uncertainty analysis PTB-110 ........................... Recirculation ....................... $12.00
example. CTI ToolKit Software is a offered for sale separately to aid with test
This is a summary of 7 years field study, and gives a procedure to
data analysis. Revised September 2022
determine maximum recirculation to be expected for any given
ATC-105 DS ............ Acceptance Test Code................ $35.00 operating condition; also recommendations for cooling tower
for Dry Fluid Coolers orientation to minimize recirculation. June 1977
This code covers the determination of the thermal capability of
mechanical draft dry fluid coolers of both the forced and induced draft
type. July 2018 STD-111 ................... Gear Speed Reducers ................ $14.00
This standard sets forth rating practice and operating considerations
ATC-105S ............... Acceptance Test Code................ $35.00 for gear speed reducers used with propeller type fans on industrial
for Closed Circuit Cooling Towers water cooling towers. Reviewed June 2024
This code is similar to the open circuit tower in both form and function
STD-112 .......... Pressure Preservative Treatment ...... $14.00
except for the fluid circuits. Reviewed July 2011
of Dimensional Lumber
ATC-105 AS…. Adiabatic Supplement…………………$50.00 This standard sets forth the minimum retentions and penetrations to
Adiabatic coolers, or adiabatic fluid coolers, consist of a heat be obtained, and the physical condition of the lumber when pressure
exchanger typically in the form of a coil comprised of tubes creating a treating industrial water-cooling tower lumber. Revised October 2019
closed fluid circuit(s), an air moving device, an integral adiabatic air-
pre-cooling system (such as wet media or pads, hereafter referred to STD-114 ............Design of Cooling Towers with ........ $14.00
as wet media) and a structure. In adiabatic operation, heat flows from Douglas Fir Lumber
the hot process fluid in the closed circuit(s) through the tube wall of the Grades of Douglas Fir Lumber: recommended stress and non-
heat exchanger to the airstream that has been pre-cooled by the framework grades and grading rules in application of WCLA grades
adiabatic system. This airstream is circulated by the air moving and Design Data: allowable design stresses (wet operating weight),
device, such as a fan. The heat exchanger may include internal minimum requirements for non-framework members; nominal and
enhancements and / or external fins that are in direct contact with the dressed dimensions, wind loading and weight calculations. Revised
tube wall, to improve heat transfer rates. While the air is adiabatically August 2022
pre-cooled with water running over the wet media, the entire external
surface of the heat exchanger remains dry and as such the heat ESB-117 ......... Recommendations for Maximum ....... $14.00
transfer process for adiabatic coolers is strictly sensible cooling. Life of Cooling Tower Lumber
Evaporative, dry-only, and adiabatic cooling with spray systems (as Summary of results, Cooling Tower Institute field study on wood
opposed to wetted media) are not covered by this Acceptance Test maintenance. Includes recommendations for water and lumber
Code. Adiabatic systems attached to a dry fluid cooler after purchase treatment. Reviewed April 2018
and supplied by anyone other than the original equipment
manufacturer, are beyond the scope of the standard. Revised April STD-119 .......... Timber Connection Specification ...... $14.00
2023 This standard sets forth in detail the recommended material and
manufacturing limitations, design requirements and allowable loads for
commonly used timber fasteners employed in the construction of
industrial cooling towers. Revised August 2022

April 2025
ESG-120..... Lightning Protection System Guideline .. $14.00 STD-137 ............ Fiberglass Pultruded Structural ........ $28.00
This guideline sets forth recommended design criteria, components, Products for Use in Cooling Towers
and the specifications for traditional lightning protection systems This specification offers recommendations for classification, materials
installed on water-cooling towers. Reviewed January 2024 of construction, tolerances, defects, workmanship, inspection, physical,
mechanical and design properties of glass fiber-reinforced pultruded
structural shapes intended for use as construction items in cooling
ESG-121............ Construction Safety and Health ........ $14.00 tower applications. Revised August 2017
Guidelines
The purpose of this document is to serve as a safety and health ESG-138 ...............Recommended Procedures .......... $14.00
guideline for various cooling tower procedures that are routinely Long Term Storage
performed on job sites. The information provided is based on OSHA Procedures recommended for the long-term storage of industrial scale
federal requirements. October 2009 cooling towers. In general, long-term storage is for an extended period
of more than one year, but these recommendations can also be
WTG-122 .....Guideline: Side Stream Filtration as an .. $21.00 modified for seasonal storage. The techniques are divided between
Aid to Cooling Tower Performance Mechanical Equipment and Wood Structure. These two groups of
The purpose of this guideline is to outline benefits to the operation of components require the most attention because they will deteriorate
evaporative condensers and cooling towers, their components, and to rapidly if preventive measures are not taken. Revised December 2021
the equipment and systems they support utilizing the most common
sediment side stream filtration technologies. October 2021 WTB-139 ........... Suggested Ozone Reading List ........ $12.00
WTB-139.1
ESG-123…Recommended Guidelines for Concrete ... $21.00 The CTI Water Treatment Committee has prepared the attached
Restoration and Repairs to Natural and Mechanical Draft reading list on the use of ozone in cooling water systems. This
Cooling Towers suggested list of reading materials was developed to assist in the
Prior to initiating reinforced concrete repairs at a Cooling Tower, it’s dissemination of information on the use of ozone in cooling water
important to understand the deterioration mechanisms operating and systems and in no way represents an endorsement by CTI on the use
how best to mitigate the damaging effects, before performing repairs of ozone. This list will periodically be updated as new contributions to
and placing them into service. July 2019 the literature are made on this topic. April 1992 / July 1994
STD-124…………..FRP Fan Stack Material .................. $21.00
This specification covers the material of construction, workmanship, ATC-140 .. Isokinetic Drift Measurement Test Code... $84.00
physical properties and methods of testing fiberglass reinforced plastic For Water Cooling Towers
panels used in the construction of cooling tower fan stacks. June 2023 The purpose of this Code is to describe instrumentation and
procedures for the testing and evaluation of drift from water-cooling
ATC-128 ........... Code for Measurement of Sound ....... $35.00 towers. Revised February 2023
From Water Cooling Towers
This code applies to mechanical and natural draft towers. Test and WTG-141 ........ Application of Oxidizing Biocides ...... $35.00
measurement procedures, operating conditions and instrumentation This document will cover the use and application of the four major
are specified. February 2025 oxidizing biocides used in treating cooling waters: chlorine, bromine,
chlorine dioxide, and ozone. The document will help end users and all
WTG-130A ........... Guidelines for Evaluation of ........... $14.00 personnel involved in treating cooling systems to better understand the
Cooling System Corrosion Control chemistry, the application methods and the safety and environmental
This document discusses some of the methods associated with issues concerning oxidizing biocides. July 2016
practical control of corrosion in cooling systems. January 2019
WTG-142 ................ Treatment of Galvanized.............. $21.00
WTG-130B .................. Deposit Monitoring .................. $21.00 Cooling Tower to Prevent White Rust
The purpose of this document is to identify the available deposit The purpose of this document is to provide steps in preventing “white
monitoring techniques and procedures for cooling water systems, rust” through the application of appropriate water treatment programs.
along with their advantages and limitations. March 2022 Revised April 2022
PTG-143 ......... Field Testing of Fan Performance ...... $28.00
WTG-130C ............Methods for Cooling Water ............ $21.00 Parameters on Induced Draft Cooling Towers
System Microbial Monitoring This document serves as a guideline for techniques and
This document will provide a review of typical and commonly available instrumentation that can be used to measure airflow and other fan
methods and techniques for microbial monitoring in cooling water performance parameters on induced draft in site heat rejection
systems, along with their advantages, disadvantages and limitations. equipment having axial fans . March 2022
January 2019
ESG-144 .......... CTI Fastener Material Guidelines ....... $12.00
STD-131 ....... Fiberglass-Reinforced Plastic Panels ... $14.00 Sets forth guidelines for selecting fasteners and identifies and specifies
Covers the classification materials of construction, workmanship and materials typically used in cooling tower fasteners. Revised July 2017
methods of testing glass-fiber reinforced plastic panels in various
profiles intended for use as casing, louvers and similar applications on BUL-145 ..........International System of Units (SI) ...... $14.00
cooling towers. Revised January 2023 A practical medium of exchange for all basic data of interest to
manufacturers, suppliers, and users of cooling towers. Reviewed June
STD-134 .......... Plywood for Use in Cooling Towers ... $14.00 2022
This standard sets forth specifications, grading rules, grades and
species and design criteria for cooling tower components constructed STD-146 .... Standard for Liquid Flow Measurement ... $49.00
of plywood. Revised August 2022 Methods for cooling tower liquid flow measurement. June 2022

STD-136 ........ Thermoplastic Materials Used for ........ $21.00 STD-149 ............. Corrosion Testing Procedures ......... $28.00
Film Fill, Splash Fill, Louvers and Drift Eliminators A code to develop standardized test procedures and evaluation
This specification covers the classification of rigid polyvinyl chloride techniques also designed to provide a uniform method to compare
(PVC); the physical properties, burning properties and recommended relative water treatment program performance in a cooling water
testing procedures employed to determine the defined values, whether system. March 2022
processed from virgin or reground materials. Revised August 2020
ATC-150 ............ Acceptance Test Procedure for ........ $35.00 STD-166.. Standard for Fire Resistant Partition Systems
Wet-Dry Plume Abatement used in cooling towers ............ .................................... $21.00
This code covers the determination of the effluent air or plume This standard offers recommendations for Fire Resistant Partition
characteristics of wet-dry cooling towers, designed for plume Systems used in cooling Towers. The recommendations are
abatement. Revised July 2011 applicable for Natural and Mechanical Draft cooling towers. April
2021
ESG-151................. Variable Frequency Drive ............. $21.00
Application Guidelines for Cooling Towers STD-167 .................. Gear Speed Reducers................. $14.00
This standard covers the guidelines for operation of cooling towers at For application on Induced Draft Air-Cooled Condensers
variable speeds. Revised January 2020
This standard establishes the minimum recommended rating practice
ESG-152.... Structural Design of FRP Components .... $21.00 and operating considerations for helical gear speed reducers, of
parallel shaft design, used with propeller type fans on air cooled
This guideline provides minimum design standards and cautionary
condensers. January 2023
recommendations to designers of FRP structural cooling towers.
Revised March 2021 WTG-168 External Plant Water Reuse for Cooling
ESG-153....Recommended Guidelines for Portland ... $14.00 Tower Makeup Water .................................................... $56.00
Cement Concrete for Mechanical Draft Cooling Towers The purpose of this document is to provide general guidelines to plant
This guideline offers recommendations for the use of Portland cement owners and operators for water conservation through the reuse of
concrete in the use of mechanical draft cooling towers. May 2019 degraded water sources external to the plant battery limits as a source
of cooling tower makeup water. January 2022
STD-154 .......... Cooling Tower Filament Wound.......... $14.00
Fiberglass Piping Systems STD-171 Mechanical Testing of Cooling Tower Bottom-
Supported Fill Blocks .............. .................................... $20.00
The information within this standard is for the design, manufacturing,
This standard specification covers the mechanical testing procedure of
installation and testing of FRP piping to be used in Cooling Tower
bottom-supported fill blocks used in cooling towers. The purpose of this
applications. Revised January 2023
procedure is to generate comparable data for any manufacturers'
WTG-155 ...... Internal Plant Cooling Water Reuse ....... $14.00 bottom-supported fill blocks and to ensure a standard test method for
all manufacturers taking into accounts fill types, material thickness etc.
The purpose of this document is to provide general guidelines to plant
October 2024
owners and operators for water conservation through internal plant
cooling water reuse. October 2021
ATC-174 Method of Calculation and Measurement of Water
PTG-156 .... Preparation for an Official CTI Thermal........ N/C Evaporation from Evaporative (All Wet or Wet Dry) Heat
Performance Plume Abatement, or Drift Emission Test Rejection Equipment. .............. .................................... $75.00
This bulletin covers test preparation for an official water cooling tower This test code applies to all heat rejection equipment, open circuit,
thermal performance test, plume abatement test or drift emissions test. mechanical and natural draft, which uses water evaporation. It
Revised February 2014 includes all wet and combined wet and dry (parallel or series paths)
heat rejection equipment. Closed circuit fluid coolers and adiabatic fluid
ESG-157.................... Wood to Fiberglass ................... $14.00 coolers (e.g., precooling of ambient air dry bulb temperature), which
Replacement/Repair contain two separate fluid circuits, are not covered by this test code but
This guideline covers the repair of wood cooling towers using will be covered by a supplement in the future. The equipment being
replacement pultruded fiberglass structural members. August 2023 considered is the entire cooling system consisting of the structure
(individual cell) with the heat and mass transfer surface (fill media
GLD-159…………. Legionellosis Guideline ................. $25.00 and/or other exchanger media), water distribution and collection
system, and mechanical equipment in the case of a mechanical draft
The purpose of this guideline is to provide practices that reduce the equipment. July 2023
risk of exposure to Legionella from evaporative heat rejection systems,
specifically evaporative condensers, closed-circuit cooling towers, and WTG-176 Cleaning, Passivation, and Commissioning of
open-circuit cooling towers. December 2021
Water-Cooled Heat Exchangers ................................... $45.00
ESG-160.. Recommended Guidelines for Corrosion The purpose of this document is to provide plant owners and operators
Protection of Reinforced Concrete Mechanical and with a set of consensus guidelines for cleaning, passivating, and
Natural Draft Cooling Towers……………………………$21.00 commissioning water-cooled heat exchangers to maximize the
reliability of new and existing heat transfer assets in cooling water
This document’s objective is to provide Owners, Designers, and
systems. Other stakeholders include water treatment chemicals and
Operators of Mechanical and Natural Draft Cooling Towers with
service providers and heat exchanger manufacturers. August 2023
information related to corrosion of these critical structures.
January 2019

WTG-161 ............ Consensus Cooling System ............ $56.00 ESG-178 Mechanical Equipment Supports for Cooling
Performance Guidelines Towers …………………………………… ........................ $30.00
The purpose of this document is to provide consensus guidelines on This guideline discusses the various factors that affect and determine
cooling water system program performance to plant owners and the design of structural supports for motors, drive shafts, gear boxes,
operators and their suppliers and consultants. The guidelines facilitate fans, “direct-drive” motors, or a combination thereof (referred to herein
a thorough assessment of the performance of their current cooling as “mechanicals”) for field-erected water cooling towers. Prefabricated
water treatment programs and provide a basis for contract metal “package units” or temporary units are not included as part of the
performance specifications. March 2023 document. March 2025
WTG-182 Survey of Online Analyzers ......................... $95.00
STD-163 .......... Standard for Vibration Limits in ......... $28.00 The purpose of this document is to identify recent advances in online
Water Cooling Towers sensor technology. February 2024
The standard for vibration limits in water cooling towers provides
cooling tower owners and manufacturers a specification for the STD-201RS ............. Performance Rating of ................. $56.00
acceptable mechanical vibration levels in new cooling towers. Evaporative Heat Rejection Equipment
September 2021
This Standard sets forth a program whereby the Cooling Tower
Institute will certify that all models of a line of evaporative heat rejection
equipment offered for sale by a specific Manufacturer will perform
thermally in accordance with the Manufacturer’s published ratings, as This Cooling Technology Institute (CTI) publication is published as an aid to
limited in Paragraph 5.3. Revised October 2021 cooling tower, evaporative closed circuit cooler, dry fluid cooler, and
evaporative condenser purchasers and designers. It may be used by anyone
desiring to do so, and efforts have been made by CTI to assure the accuracy
STD-201RS Dry ..... Performance Rating of ................. $56.00 and reliability of the data contained herein. April 2025
Dry Fluid Coolers
This Standard sets forth a program whereby the Cooling Tower STD-204RS Sound Rating of Evaporative and Air-Cooled
Institute will certify that all models of a line of dry fluid coolers offered Heat Rejection Equipment………………………........... $40.00
for sale by a specific Manufacturer will perform thermally in accordance
with the Manufacturer’s published ratings, as limited in Paragraph 5.3. This Cooling Technology Institute (CTI) publication is published as an
Revised October 2021 aid to cooling tower purchasers and designers. It may be used by
anyone desiring to do so, and efforts have been made by CTI to
STD-201OM .... Operations Manual for Thermal .......... $56.00 assure the accuracy and reliability of the data contained herein.
Performance Certification of Evaporative Heat Rejection April 2025
Equipment
Operation Manual to guide program participants in complying with the STD-205 OM…Operations Manual for Products and
provisions of the latest edition of CTI Standard 201RS. Revised Materials Certification for Evaporative and Air-cooled Heat
October 2021 Rejection Equipment .................................................... $35.00
This standard sets forth a program whereby the Cooling Technology
STD-203 . Field Erected Cooling Tower Specification. $21.00 Institute will certify the test results of products and materials when
This Standard covers the design, fabrication and inspection of tested in a CTI qualified testing laboratory and that the procedures as
crossflow and counterflow mechanical draft cooling towers. April 2019 outlined in applicable CTI Rating Standards and Test Protocols. June
2022
STD-204OM Operations Manual for Sound Performance
Certification of Evaporative & Air-Cooled Heat Rejection
Equipment ……………………….. ................................... $40.00

Software
ToolKit Software V 4.2
A suite of useful software applications for anyone responsible for the performance of evaporative cooling towers. Includes the Demand Curve
Worksheet, Air Properties Calculator and Mechanical Draft Performance evaluator.
Single User License (Member) $455.00 (Non-Member)….$495.00
Available for immediate download on the Market Place at www.cti.org

Research Papers
RSP-1 ............................................................................. $28.00
CTI Multi-Agency Testing Committee – Wet Bulb Instrument Investigation. Summary White Paper. July 2019
(Prices do not include postage and handling.)

CTI Journal
The CTI Journal is the first technical journal devoted solely to the subject of cooling towers and their operations. The CTI Journal is of current interest to
Institute members and other professionals responsible for the construction specifications, testing, maintenance and operation of cooling towers.
The CTI Journal is published each year in January and June. Complimentary subscriptions are mailed to individuals in the United States. Library
subscriptions are $45/year. Subscriptions mailed to individuals outside the United States are $45/per year.

CTI Directory
Membership Directory .................................................. $70.00
Book bound with membership categorized by Honorary Members, Manufacturers, Suppliers, Users and Individual Members. Includes a copy of the CTI
Bylaws.
(Prices do not include postage and handling.)

CTI Manual
The purpose of the CTI Manual is to bring together into a common place, comprehensive information pertaining to cooling towers and other types of
equipment that reject heat to the atmosphere. The Manual has been developed in the form of individual chapters, each of which stands on its own merit,
and includes a list of references and a bibliography.
Chapters now available:
Chapter 1 - Cooling Tower Operations
(September 2021) ...................................... $14.00
Chapter 2 - Introduction to CTI Thermal Design
(March 1998).............................................. $12.00
Chapter 3 - Performance Variables of Cooling Towers
(March 1998).............................................. $21.00
Chapter 4 - Recommendations for Winter
(September 2018) ...................................... $21.00
Chapter 6 - Water Chemistry and Treatments
(July 2005) ................................................. $35.00
Chapter 9 - Materials of Construction for Cooling Towers
 (Revised May 2017) ................................... $21.00
Chapter 10 - Mechanical Components for Cooling Towers
(October 2021) ........................................... $35.00
Chapter 12 - Field-Erected Cooling Tower Fire Protection
(Reviewed August 2023) ............................ $14.00
Chapter 13 - Inspection of Wet Cooling Towers
(Revised January 2022) . $28.00Complete manual $182.00

Historical Documents
The following documents have been removed from the CTI Publication Manual and/or the CTI Manual
either because they are considered no longer relevant, considered inaccurate per current technology,
or not permitted due to environmental concerns. However, the documents do contain valuable
information for the industry as historical documents. These documents are only available in .pdf
format.
ESB-104 ....................................................... Wood Maintenance .................................................................. $17.00
This is a report of 10 years field study of operating towers and eight preservative treatments. Discuss types of
deterioration and means of prevention through water treating and preservative treatments. Tables and graphs of field
study data, photographs of typical types of deterioration. Reviewed October 2014
PTG-116 ....................................... Recommended Recirculation Allowances ............................................ $12.00
Application of average recirculation to wet bulb temperature to obtain design inlet wet bulb temperature corrected for
recirculation. April 1959

Bid Form
PTG-118 ................................................... SF/FA (Factory Assembled) ........................................................ $7.00
PTG-118 ......................................................... SF/FE (Field Erected) ............................................................... $7.00
The inquiry and Bid Form is used to show minimum information that is necessary to include inquiries and to show all
pertinent data on the requested bids. Cooling tower purchasers use this form with their inquiries by filling out all the
information marked with an asterisk (*). Manufacturers then return their bids on this form. This assures the purchaser of
receiving adequate information on all bids. It also facilitates the comparison of bids by furnishing the same information in
the same place on all bids. Further, it establishes uniform units for the various data. July 1993

WTG-129 .................................... Handling Water Treatment Chemicals Safely ......................................... $12.00

Laminated poster for use where chemicals are handled. General and emergency procedures. December 1996

WTG-132 .......................... Supervisory Guide Handling Water Treatment Chemicals .............................. $12.00
A guide for first-line supervisors responsible for cooling tower treatment operations. October 1984

ATC-133 .................................... Acceptance Test Code for Spray Cooling Systems…………………………$21.00

Part I - Test Procedure: methods and instrumentation to determine the capability of spray cooling systems.
Part II - Evaluation of Results: outlines a method of evaluation of the performance of spray cooling systems from test data
using performance curves.
Part III - Appendix: performance curve method. February 1985
PTG-135 .....................................Guidelines for Thermal Upgrading of Mechanical Draft Cooling Towers …………...$12.00

The purpose of this document is to provide guidelines to assist the user in thermal upgrading, repair and rebuilding of mechanical draft cooling towers.
Revised March 1998

WTB-147 ..................................... Water Reuse Paper of Interest To Cooling Tower Users…………………………… $12.00
This is a bibliography of published and presented papers on the general subject of water reuse in cooling tower systems.
August 1997
WTB-148…………………………………..Legionellosis…………………………………………………………………..NC
CTI Position Statement on the disease known as the Legionnaires' Disease, caused by the bacterium Legionella
pneumophila. July 2008

STD-201 ................................... Standard for Thermal Performance Certification ...................................... $56.00

 of Evaporative Heat Rejection Equipment
This Standard sets forth a program whereby the Cooling Tower Institute will certify that all models of a line of evaporative
heat rejection equipment offered for sale by a specific Manufacturer will perform thermally in accordance with the
Manufacturer’s published ratings, as limited in Paragraph 4.5. Revised April 2011

STD-202Standard for Publication of Custom Cooling Tower Thermal Performance Test Results …… $28.00
This Standard sets forth a program whereby manufacturers of custom cooling towers voluntarily allow the results of their CLTTA tests to be published
under the requirements of this program. Revised April 2021

Chapter 5 - ........................................... Field Test Handbook (April 1998) ................................................... $42.00

The purpose of this Chapter is to list convenient formulas, conversions factors, tables, etc. that will be helpful in
conducting cooling tower performance tests and evaluating the resulting test data. April 1998

Chapter 7-………….Liquid Effluent Pollution Control (December 1976)…………………………………….$21.00

Chapter 8 - …………Environmental Aspects of Cooling System Operation (June 1981)…………………$12.00
Chapter 11 …………Electrical Components for Cooling Towers (January 1984)………………………….$12.00
 COOLING TECHNOLOGY INSTITUTE
PO Box 681807 • Houston, TX 77268 • 281.583.4087 • Fax 281.537.1721
Web Site: http://www.cti.org • email: [email protected]