Scribd
Upload
4 views

Matrix_Analysis_of_Structures

The document outlines a series of corrections and updates to various figures, equations, and matrices within a textbook. Changes include replacing figures, adjusting numerical values, and modifying text for clarity and accuracy. Specific instructions for each update are provided, indicating the exact changes needed for each section.

Uploaded by

asad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Matrix_Analysis_of_Structures

The document outlines a series of corrections and updates to various figures, equations, and matrices within a textbook. Changes include replacing figures, adjusting numerical values, and modifying text for clarity and accuracy. Specific instructions for each update are provided, indicating the exact changes needed for each section.

Uploaded by

asad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Replace current table with new one: 1

!
"
Replace current table with new one: 1

! #$
"

Add “ANSWERS TO SELECTED PROBLEMS (Available on book website 1


at www.cengagebrain.com)” after “INDEX”
% Replace Fig. 4.22 with new figure 1

% Add partition lines around “21,600” (row 4, column 4) in equation (1). 1


Add partition line between “59.375 kN” and “–33.333 kN·m” in equation 1
(8).
For the 2nd matrix for Q2 =, add the following units: 1
5 kN
1 kN · m
6 kN
2 kN · m
& In Q3, remove partition line between “87.5 kN” and “–66.67 kN·m” 1
Fig. 5.19 (i): in PM matrix, change “2” (row 3, column 4) to “0” 1
'' In the last line of Fig. 5.23 (continued), change “2.00E+0” to “0.00E+0”. 1
' Replace Fig. 5.34 with new figure 1

Replace Fig. 5.34 (continued) with new figure 1

Under Section 5.7, delete “the publisher’s website for this book 1
(www.cengage.com/engineering),”
% In the last row for the F2 matrix, add a minus sign so the value becomes “– 1
692.7 kN · m”
'& Fig. 6.17 (c): Move “300 cos θ” and “300 sin θ” labels as shown below 1

'&' In matrix R, change 1


“–101.17 kN” to “–101.18 kN”
“–40.25 kN” to “59.76 kN”
“–137.77 kN · m” to “–71.33 kN · m”
' Replace Fig. 6.25 with new version 1
'' Replace Fig. 6.32 with new version 1

'' In Fig. P6.6, P6.12, etc., change 1


“E = 10,000 ksi” to “E = 70 GPa”
'' In Problem 6.15, in u1 change 1
“–0.0001287 m” to “–0.001287 m”
'' In Fig. P6.39, change “ 2.75 r” to “2.75 m” 1
'%' In Fig. 7.3, change 1
“100 kN” to “90.75 kN”
'%% Replace Fig. 7.3 (continued) with new version 1

'% In K1 matrix, add partition lines around 1


720 0
0 260,000
'% In K3 matrix, add partition lines around 1
720 0 3,600
0 260,000 0
3,600 0 18,000
'% In the “P” matrix, change 1
“100” to “90.75”
'% In Q1 matrix, change both instances of “89.18 kN” to “89.17 kN” 1
and both instances of “–89.18 kN” to “–89.17 kN”
' & In F2 matrix, change “60.84 kN” to “60.83 kN”, 1
“–60.84 kN” to “–60.83 kN”, and
“–304.15 kN · m” to “–304.16 kN · m”
' & In Q3 matrix, change 1
“210.86 kN” to “210.83 kN” and
“–210.86 kN” to “–210.83 kN”
' In F3 matrix, change “210.86” to “210.83” and 1
“–210.86” to “–210.83”
' In Fig. 7.8 (continued) (c) change “432.896” to “432.9” 1
' In Fig. 7.8 (continued) (d) change “432.896 kN” to “432.9 kN” 1
' % In the Ans following the Q3 matrix, change 1
“Qa3 = –81.732 k = 81.732 k (T)” to
“Qa3 = –270.56 kN = 270.56 kN (T)”
' On the leftEhand side of Fig. 7.10 (continued) (c) change 1
“–51.69 kN” to “51.69 kN”
' For Q1 matrix, change 1
“126.20 kN” to “126.20 kN · m”
&& In Member 3, change “–3 m” to “–3 mm” 1
& In S matrix, change 1
“–260,720” (row 1, column 3) to
“–260,000”
& In Fig. 7.21 (a), change both instances of “20 ft” to “5 m” 1
& In F2 matrix, bottom row, change 1
“–10.0516” to “–10.0516 kN · m”
% The last line in problem 7.29 should have “2.5” instead of “25” 1
In answer for S matrix, change 1
“18,881.26” to “17,835.7”,
“4,099.46” to “3,402.5” (two instances),
“126,453.02” to “122,271”, and
“14,050.02” to “13,585.4”
In Member 2, change 1
“(0 + 3)2” to “(0 – 3)2”
In Member 3, change 1
“(0 + 1.5)2” to “(0 – 1.5)2”
'& In matrix after Joint Displacements, change 1
“18,881.26” to “17,835.7”,
“4,099.46” to “3,402.5” (two instances),
“126,453.02” to “122,271”, and
“14,050.02” to “13,585.4”
'' For first 3 Checks, change “≈ 0” to “= 0” 1
'' In the final Check above Section 8.2, add “= 0” 1
In Fig. 8.23 (a), change 1
“A = 14,700…” to “A = 73,500…”,
“Iz = 142…” to “Iz = 710…”,
“Iy = 46.8…” to “Iy = 234…”, and
“J = 3.0…” to “J = 15…”
Replace Fig. 8.23 (continued) (d) with new version 1
In K3 matrix, move partition line one column over to the right as shown 1
below

%& In Fig. 9.1 (a), change 1


“E = 200 kPa” to “E = 200 GPa”
%&' In P ∗ matrix, change “50” to “150” and 1
“–112.5” to “–50”
%& In the first matrix set after Joint Displacements, change “15,384” (row 3, 1
column 3) to “7,692”
%&% For R matrix, change 1
“218.844 kN” to “318.8 kN” and
“–212.199 kN · m” to “–149.69 kN · m”
%&% For Q1 matrix, change 1
“235.648 kN” to “320.01 kN”,
“280.247 kN” to “72.82 kN”,
“122.234 kN · m” to “126.20 kN · m”,
“32.672 kN” to “–51.69 kN”,
“–146.087 kN” to “61.34 kN”, and
“–91.669 kN · m” to “–87.69 kN · m”
% Replace Fig. 9.5 (continued) (c) with new version 1

% In Fig. 9.5 (continued) (c) change “185.81” to “185.71” 1, 2


% ' For Q1 matrix, change 1
“52.143 kN” to “4.99 kN”,
“–221.429 kN · m” to “64.248 kN · m”,
“–52.143 kN” to “–4.99 kN”, and
–300.000 kN · m” to “–14.286 kN · m”
% For Q3 matrix, change 1
“22.143 kN” to “35.01 kN”,
“–121.429 kN · m” to “164.33 kN · m”,
“–22.143 kN” to “–35.01 kN”, and
“–100.000 kN · m” to “185.81 kN · m”
% For R matrix, change 1
“52.143 kN” to “–4.99 kN”,
“–221.429 kN · m” to “64.248 kN · m”,
“–22.143 kN” to “–35.01 kN”, and
“–121.429 kN · m” to “164.33 kN · m”
% % In Fig. 10.5 (continued) (d), change 1
“6576.49 kN” to “1772.934 kN”,
“0.75 m” to “0.67 m”, and
“–3900.76” to “3900.76”
% In the second to last line of Example 10.1, change 1
“1772.938” to “1772.934” and
delete “–0.004 kN ≈”
% In the last line of Example 10.1, change “6576.49(0.67)” to “– 1
6576.49(0.67)”,
“1772.938(1.2)” to “1772.934(1.2)”,
“32663.88(2.0)” to “3266.884(2.0)”, and
“0.001 kN · m” to “–0.001 kN · m”
Eq. (B.13): change “12” to “4” (x3), 1
“9” to “3” (x2), and “15” to “5” (x2)
Eq. (B.14): change “–1,800” to “–600” and “–26,649” to “–8,883” 1
Eq. (B.15): change “24” to “8”, 1
“32” to “10.667” (x2), and
“220.33” to “73.444”
In Qa, change “227.475” to “–227.475” 1

You might also like