V.

MAGESHKUMAR
S/O A. Vairamoorthy,
121, Palla Street, Pillaipakkam,
Sriperembudur-602105, Mobile No.: +91-
9952119209
TamilNadu. E-mail:
[email protected]

CAREER OBJECTIVE:

To be an able, enthusiastic, skilled, and reliable executive seeking a position that

reflects my experience, skills, and personal attributes including dedication, meeting
goals, creativity, and the ability to follow through.

Key Skills:
 Customer Quality / Quality Assurance / New Product Developement / Supplier
Quality
 8D, PAPP, APQP, Control Plan, PFMEA, 7QC Tools, CAPA
 Supplier and Customer Audits /New Product Development
 EMS Field (Electronics Manufacturing Services) &Surface Mount Technology
(SMT)
 E-vehicle Motor Controller, Vehicle Controller and Hub Motor / Drive Motor
 THT Components, Selective Solder, Wave solder, Pressfit, Conformal Coating
 Overseas E-Component Supplier Handling
 Knowledge in Schematic Drawings
 Periodic ESD Internal Audit(ANSI 2022 standard)
 Diagnosing & Trouble shooting the faults using CAN Tool

Work Experience:
1. Sona BLW Precision Forging Ltd July 2023 to Till Date
Quality Assurance – Senior Engineer
 Handling OEM’s like TVS Motors, Revolt, MontraElectris, Ampere Vehicles, TATA
Motors
 New product development – PPAP ocument submission and approval
 Engineering change and Change managemnt approval
 Gate Review document submission and approval
 Coordinating with Program Managemnt team for new product launch
 Customer audit closure review and submitting to customer on time.
 Handling customer complaints and 8D report explanation at customer end
 CQI-17 Soldering System Assessment For Automotive Sector
 Ensuring SMT process flow and SOP’s for the product related
 Periodic ESD Internal Audit (ANSI 2022 standard)
 Validating the SMT to Box build process parameters including Stencil design all Jig
and Fixture and Assembly Equipment share validation report to customer
 Handling EMS supplier and frequent audits & development
 Diagnosing & Trouble shooting the faults using CAN Tool
 Handling overseas E-Component supplier for failure analysis and 8D Closure
 Warranty failure joint analysis and action plan.
 Good Knowledge in Electrical Vehicle Motor unit and Controller unit
 Maintaining customer score card within target
 Visiting customer end to understand the failure and providing the proper action
 Focusing on warrant failures & OEM inline failures and mapping the fail details

2. HL Klemove India Pvt Ltd (Mando Hella Electronics) May 2019 to June 2023
Quality Assurance - Engineer
 Handling OEM’s Like Hyundai, KIA Motors, TATA Motors, Mahindra & Mahindra, Bajaj
 Diagnosing & Trouble shooting the faults using CAN Tool
 Handling customer complaints and 8D report explanation at customer end
 Handling overseas E-Component supplier for failure analysis and 8D Closure
 Maintaining PPM in target in SMT to Assembly section
 Warranty / Field failure analysis and action plan submission
 Warranty & Customer claim monitoring and achieving the KPI targets
 Planning and Monitoring customer audits and closures and achieving the KPI
 Effectiveness monitoring of 8D closures, Counter measure and verificationfor
complaints.
 Preparing the 8D report and submitting to customer on time.
 Getting deviation from customer for 4M and process parameters.
 Conducting internal PPAP & 4M audit& Coordinating with customer for customer
Process audit.
 Submission of Revalidation report on time against AOI.
 Submitting the PPAP document & EO change documents to customers
 Getting PPAP approval from customer on time.
 Submitting 4M request and time plan for new 4M’s & on time 4M approval from
customer
 Customer audit closure review and submitting to customer on time.
 Conducting supplier audit for supplier 4M’s.
 In process quality, Final Inspection and Incoming quality process verification, in
addition.
 Conducting control plan & PFMEA audit in internal process.

3. Trusted Aerospace Pvt Ltd Aug 2018 to April 2019

Quality engineer
 Document review and maintaining documents.
 Developing the new Parts and following it from raw material to dispatch.
 Preparing documents like PPAP,SPC, MSA, APQP and QC tools.
 PPAP & 4M document submission to customer and approval activity
 Manufacturing the product as per the requirements and inspecting the product.
 Checking the specification of the product as per the design.
 APQP verification&Verification of Control Plan.

4. Venu Engineering PVT LTD., Chennai November2016 to July 2018

Quality engineer– New Product Development
 Document review and maintaining documents.
 Developing the new Parts and following it from raw material to dispatch.
 Preparing documents like PPAP,SPC, MSA, APQP and QC tools.
 Conducting meeting with Customer regarding New product.
 Handling customer complaints and 8D closures & Supporting the customers
technically
 Conducting internal process audit&Checking the specification of the product.
 Continuous quality improvement.
 PPAP & 4M document submission to customer and approval activity
 Manufacturing the product as per the requirements and inspecting the product.

5. Voltech Engineers Pvt Ltd., Chennai March 2014 to July

2016
Assistant Engineer
 Fabrication of the product as per the requirements and Inspecting the product.
 Checking the specification of the product.
 Supporting the customers technically&Solving the customer’s problems.
 Continuous quality improvement&Document review and maintaining documents.
 Prepared FMEA documents and finding the causes for it and solving the problem,
when failure occurs.
 Preparing weekly and Monthly reports, and submitted to the Factory In charge.
  Checking the specification of the product as per the design.
 Prepared Working procedure of all machines and Installation manuals.
 Looking after the Inspections such as Inward, Initial, Line and Final inspection.

Skills Known:
 AutoCAD&CATIA V5.
 MS Office
 Measuring Instruments Handled: CMM/DVC/Profile Projector/VMM

EDUCATIONAL QUALIFICATION:

COURSE INSTITUTION UNIVERSITY/ BOARD YEAR PERCENTAGE

B.E Rajalakshmi Anna University, 201

65%
(AERONAUTICAL) Engineering College Chennai. 3

JJ Government State Board of School

200
HSS Higher Examination, 66.9%
9
Secondary School TamilNadu.
JJ Government
SSC Board of Secondary 200
Higher Secondary 66.8%
Education, TamilNadu. 7
School

Certifications
 Certified Internal Auditor for IATF 16949:2016 & ISO 9001:2015
 Certified for PFMEA – AIAG VDA 1st Edition
 ESD Internal Auditor : ANSI 2022

Strengths:
 Positive attitude & Time Management.
 An optimist who makes himself and others Happy all the time.
 Vibrant, Dynamic, efficient and a go- getter.
 Good leadership skill and team work

PERSONAL DETAILS:

Name : V. Mageshkumar
Father’s Name : A. Vairamoorthi
Sex : Male
Marital Status : Single
 Date of birth : 27 August 1992
Nationality : Indian
Languages known : Tamil,English& Hindi(Learner)

DECLARATION:

I hereby declare that the information furnished above is true to my best of knowledge and belief.

PLACE:

DATE: (V. MAGESHKUMAR)