Section 7 - UW Specs
SECTION 11110
LAUNDRY WASHER-EXTRACTOR, 65 LB. [29.5 KG] CAPACITY
PART 1 GENERAL
1.01 SECTION INCLUDES:
A. Automatic laundry washer-extractor for processing water-washed linen items
1.02 SYSTEM DESCRIPTION
A. DESIGN REQUIREMENTS:
1. Construction: 304 or equal stainless steel cylinder, tub and cover panels
2. Input voltage: X:200-240/50- 60/1/3;2/3 wire plus ground
N:440-480/50- 60/3;3 wire plus ground
3. Dry weight capacity ( lbs. 65 [29.5]
[kg] ):
4. Wash cylinder volume 9.7 [246] minimum
( ft3 [l] ):
5. Overall width ( in. [mm] ): 34.1 [867] nominal
6. Overall height ( in. 64.4 [1637] nominal
[mm] ):
7. Overall depth ( in. 51.1 [1298] nominal
[mm] ):
8. Number and size of 2(Main fill) connections with 3/4 in. NH male connections and
water connections: 2(Spray rinse) connections with 3/4 in. NH male connections
9. Number and size of drain 1 outlet at 3 in.
outlets:
10. Overflow: Internally plumbed
11. Control system: Programmable microprocessor
12. Cylinder drive: Inverter drive, poly V belt system
13. Drive motor ( hp [kW] ): 5.0 [3.7]
B. PERFORMANCE REQUIREMENTS:
1. Number of selectable Variable 10-50 rpm
wash speeds:
2. Number of selectable Variable 75 [2.5] - 477 [100]
extract speeds ( RPM
[G] ):
3. RPM [G] at highest 477 [100]
extract speed:
4. Chemical supply system
a. automatic flushing and 8 external supply signals
b. manually filled 5 compartment dry chemical dispensing system (optional - designated
by V30V in the model number)
5. Configured for possible future addition of water reuse system
12-10-380 Part No. 6-22-174
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
July 2022
Section 7 - UW Specs
6. Control system
a. Programming methods: Control Interface, Wi-Fi, Infrared or USB (PC)
b. 99-Cycle Capability with graphic display of words and icons
c. 34 languages supported
d. 30 programmable water levels, plus overflow
e. Automatic maintenance reminders by day, week and month
f. Wi-Fi and PC software with management reports
g. Internet connectivity for off-site diagnostic and remote programming capabilities
h. Real-time clock allows time and date stamp to 100+ items
i. Cycle counter
j. Displays a count up timer after the end of cycle
k. Temperature controlled fill and thermal cool down
l. Water monitoring: fill value, slow drain and automatic leak detection system
m. Diagnostic capabilities
7. Drain valve automatically opens in event of power failure
8. Bearing protection: ozone resistant seals
9. OPTispray spray rinse
1.03 DELIVERY, STORAGE AND HANDLING
A. ACCEPTANCE AT SITE:
1. Inspect machine for damage prior to acceptance. If damage is found, follow freight
handler’s procedure for claims.
B. STORAGE AND PROTECTION
1. Machine should be stored in a site protected from weather, direct sunlight and
temperature extremes. Do not remove packaging prior to storage.
2. If machine is to be stored for an extended period of time, consult manufacturer for
special requirements.
1.04 SYSTEM STARTUP AND COMMISSIONING
A. Machine installation should be inspected by local manufacturer’s representative prior to
startup and operation. The party installing the machine is responsible for setting the schedule
for this inspection.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Alliance Laundry Systems LLC - UniMac, obtain commercial laundry equipment from a single
manufacturer
2.02 QUALIFIED MODELS
A. UniMac model UWT065V40V (without soapbox) and UWT065V30V (with soap box option
[no substitutions])
PART 3 EXECUTION
3.01 INSTALLATION
12-10-380 Part No. 6-22-174
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
July 2022
Section 7 - UW Specs
A. Refer to and comply with manufacturer’s installation instructions. Do not deviate without
permission from site owner, architect, general contractor and manufacturer’s local
representative.
12-10-380 Part No. 6-22-174
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
July 2022
Machine Dimensions and Specifications
Models UWT065V40V
Equipment specifications are subject to change without notice. Design 5
Machine Dimensions and Specifications Dimensions and Foundation Requirements,
in. [mm]
A 64.4 [1636] I 34.2 [869]
B 34.1 [866] J 60 [1524]
FRONT
C 28.8 [732] K 12 [305]
D 51.1 [1298] L 20 [508]
A E 23.19 [589] M 53.4 [1356]
F 2 [51] O 14.4 [366]
G 6 [152] P 12 [305]
C H 18 [457] * (minimum) Q 60 [1524]
*Total depth of foundation (concrete plus 6 in. [152 mm] fill)
Circuit Breaker
Water, Drain and Weight Specifications
B
D Number of drain outlets 1
Drain connection size, in. 3
RIGHT
Number of water inlets Main fill 2
Spray rinse 2
Water inlet connection size, in. Main fill 3/4
Spray rinse 3/4
Net weight, lbs. [kg] 1110 [499]
E
F Standard shipping weight, lbs. [kg] 1150 [522]
L Side clearance (minimum), in. [mm] 6 [153]
G H Side clearance (recommended), in. [mm] 12 [305]
Electrical Specifications
Full Load Amps
Codes
Voltage
Cycle
Phase
Wire
AWG
mm2
Circuit Breaker
I
K K
J
Cold
Hot Fill Valve
Cold Spray Valve Hot
Spray Valve Fill Valve
BACK Electrical X 200- 50-6 1/3 2/3 16/ 20/ 12/ 4.0/
Input 240 0 10 15 14 2.5
N Standard 440- 50-6 3 3 7 15 14 2.5
M Drain Electric 480 0 36 40 8 10.0
Heat
O
H G
B
P Q P PHM47L_SVG
12-10-380 Part No. 6-22-184
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
July 2022
