AOC4518R8v06

Model: A114518R1v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-3x14i/2x18i/6x18i-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs–2.0m
11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr3) 690–960 (Cr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960 690–803 790–862 824–894 880–960
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.5 13.9 14.0 14.2 13.5 13.9 14.0 14.2
Gain (dBi)
Over all tilts 13.5±0.5 13.9±0.5 14.0±0.5 14.2±0.5 13.5±0.5 13.9±0.5 14.0±0.5 14.2±0.5
Side lobe suppression for first side
> 15 > 15 > 15 > 15 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 71±8 68±8 67±6 65±5 69±6 68±8 66±8 63±6
Vertical 3 dB beam width (°) 17.0±1.8 15.3±1.5 14.8±1.2 13.9±1.2 18.0±1.8 16.5±1.5 15.8±1.2 14.6±1.2
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 25
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 24 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –1.10 –1.00
Efficiency average (%) 78 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1695–2690) (LBy1/RBy7)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 16.7±0.8 17.3±0.6 17.7±0.5 18.2±0.5
Side lobe suppression for first side
> 17 > 17 > 16 > 17
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 68±6 65±6 62±5 58±6
Vertical 3 dB beam width (°) 8.1±0.6 7.4±0.6 6.4±0.5 5.7±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 24
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18
Efficiency (dB) –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2. Electrical datasheet is available in XML format.
1
AOC4518R8v06
Model: A114518R1v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-3x14i/2x18i/6x18i-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs–2.0m
11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

Electrical Properties
2 x (1695–2690) (LTy2/RTy8) 2 x (1695–2690) (CLTy4/CRTy6)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
2–12, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 16.7 17.3 17.6 18.0 16.7 17.3 17.6 18.0
Gain (dBi)
Over all tilts 16.6±0.7 17.2±0.5 17.5±0.5 18.0±0.5 16.6±0.7 17.2±0.5 17.5±0.5 18.0±0.5
Side lobe suppression for first side
> 17 > 17 > 17 > 16 > 17 > 16 > 17 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 66±6 64±6 62±5 58±5 66±6 64±6 62±5 58±5
Vertical 3 dB beam width (°) 8.1±0.6 7.5±0.6 6.5±0.5 5.7±0.5 8.1±0.6 7.5±0.6 6.5±0.5 5.7±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 25 > 26 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Efficiency (dB) –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25 –0.90±0.20 –0.95±0.20 –1.15±0.20 –1.20±0.25
Efficiency average (%) 81 80 77 76 81 80 77 76
Max. effective power per port (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding

Electrical Properties
2 x (1427–2690) (CLBy3/CRBy5)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.3 16.8 17.4 17.8 18.3
Gain (dBi)
Over all tilts 15.2±0.7 16.8±0.7 17.3±0.5 17.7±0.5 18.2±0.5
Side lobe suppression for first
> 17 > 18 > 18 > 16 > 17
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±8 66±6 64±6 62±6 58±7
Vertical 3 dB beam width (°) 9.8±0.7 8.0±0.7 7.4±0.6 6.6±0.5 5.7±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 26 > 25 > 26 > 26 > 26
Cross polar ratio, 0° (dB) > 16 > 18 > 18 > 18 > 18
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)

2
AOC4518R8v06
Model: A114518R1v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-3x14i/2x18i/6x18i-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs–2.0m
11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2249 x 499 x 206
Packing dimensions (H x W x D) (mm) 2520 x 560 x 255

(739)
Antenna weight (kg) 48.0
Antenna packing weight (kg) 65.0 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) –40 to +65

1435
2249
Frontal: 825 (at 150 km/h)
Wind load (N) Lateral: 430 (at 150 km/h)
Maximum: 1080 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 22 x 4.3-10 Female
Connector position Bottom

75
*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Port and Array Layout

r1 r3
11–12 3–4 15–16
7–8 19–20

y2 y4 y6 y8

9–10 13–14 17–18 21–22

1–2 5–6

y1 y3 y5 y7

L: Left array T: Top array C: Center array y: Yellow r2

R: Right array B: Bottom array r: Red

Port Array Freq(MHz) RET S/N

1–2 Lr1 690–960 HWxxxx……….....Lr1
3–4 Cr2 690–960 HWxxxx……..…..Cr2
5–6 Rr3 690–960 HWxxxx………....Rr3
7–8 LBy1 1695–2690 HWxxxx………..LBy1
9–10 LTy2 1695–2690 HWxxxx………..LTy2
11–12 CLBy3 1427–2690 HWxxxx……..CLBy3
13–14 CRTy4 1427–2690 HWxxxx……..CRTy4
15–16 CRBy5 1695–2690 HWxxxx……..CRBy5
17-18 CRTy6 1695–2690 HWxxxx……..CRTy6
19-20 RBy7 1695–2690 HWxxxx……….RBy7
21-22 RTy8 1695–2690 HWxxxx……….RTy8

3
AOC4518R8v06
Model: A114518R1v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
D11X-3x690-960/2x1427-2690/6x1695-2690-11x65-3x14i/2x18i/6x18i-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs–2.0m
11xM-R
EasyRET 22-Port 3L8H Antenna with 11 Integrated RCUs – 2.2 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols* AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC Not used RS-485B Not used RS-485A DC DC return Not used
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety–Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, ICES-003
Certification: CE, IC, RCM, RoHS, REACH, WEEE

Pattern sample for reference

690–960 MHz 1695–2690 MHz 1427–2690 MHz

(Lr1/Cr2/Rr3) (LBy1/LTy2/CLTy4/CRTy6/RBy7/RTy8) (CLBy3/CRBy5)

NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna

4 Issue: 2022–04–29