C-MOS laser displacement sensor equipped with organic
LH-A series
Highest performance in its class
Integrated Laser Displacement Sensor
long distance Realize long-distance measurement up to 1,
200mm
Industry's first Organic EL display capable of displaying received
light waveforms
Shenzhen Xaori Technology Co., Ltd.
highest level highest level
Repeatability The sampling period
0.25μm 133.3μs
LH-A030N/P
Using self-developed ultra-high sensitivity C-MOS,
It achieves the highest level of repeat accuracy and sampling period in its class.
Contribute to the improvement of production quality and production speed in more testing sites.
The LH-A series is a C-MOS laser displacement sensor equipped with organic EL, which realizes
Achieved the highest level of 0.25μm repetition accuracy and 133.3μs sampling period among similar products.
There is a long-distance product lineup with a measurement distance of up to 1,200mm, and it is widely used in
Long-distance measurement such as object roll diameter and load detection.
The display part adopts an organic EL display and supports IO-Link.
It is a cost-effective displacement sensor that meets the needs of high-precision discrimination.
Applications
Unqualified detection of cup food seal
Mounting component height detection Electronic component existence/whether overlapping detection
Battery web detection
OK (密封正常) NG (密封不合格)
02
Product Lineup
light sour model
type Scope of detection Repeatability Linear Accuracy ce Interface
laser clas cable type Connector type
s
30±5mm ±0.1% F.S.
0.25μm LH-A030N/P LH-A030M12
（25～35mm） ±0.01mm
red
laser Analog
Level 1 output×1ch
50±10mm ±0.1% F.S.
0.25μm Switch output LH-A050N/P LH-A050M12
（40～60mm） ±0.02mm × 2ch
External input
× 1ch
±0.1% F.S.
10μm LH-A245N/P LH-A245M12
245±175mm ±0.35mm
（70～420mm）
Diffuse type
±0.1% F.S. red
20μm LH-A350N/P LH-A350M12
±0.5mm laser
350±250mm level 2
（100～600mm）
Measuring range 200 ~
700mm:
100μm ±0.1% F.S. (±1mm) LH-A700N/P LH-A700M12
Measuring range 700~
700±500mm
1200mm: ±0.3% F.S. (±
（200～1200mm） 3mm)
● For pigtails please purchase the optional connecting cable.
optional accessories
Wire tangle detection car location detection Connecting cable (bending resistant cable)
LH-XR-02M Cable length 2m
LH-XR-05M Cable length 5m
OK (有缠绕) NG (无缠绕)
03
Input and output circuit diagram
When SIO mode (standard I/O mode) is set to NPN output When SIO mode (standard I/O mode) is set to PNP output When set to IO-Link mode push-pull output
brown: DC18 24V Brown: DC18 24V Brown: DC18 24V
switch output1load load 1 load load
Switch output (Q1)/
black: (Q1) Black: (Q1)) black: ④ 2 1 IO-Link
inter in in
nal t Switch output 2 load t
circui NPN output Q2/ er (Q2)/ er load
t Switching output 2 (Q2) /
n n
White:② Analog output QA White: Analog output QA al White ② 3 Analog output Qa
al
1 4
ci
Analog rc
input device 2 ci load load
rc ui
Gray: External input ui Gray: External input t Gray: External input
2 5
t
Analog Analog
input device input device
0V/ 0V/ 0V/
Blue: Analog GND Blue: Analog GND Blue: Analog GND
1. When used as switch output 2 (Q2) 1. When used as switch output 2 (Q2) 1. When used as switch output 1 (Q1) in NPN connection
2. When used as analog output QA 2. When used as analog output QA 2. When used as switch output 2 (Q2) in NPN connection
3. When used as switch output 1 (Q1) in PNP connection
4. When used as switch output 2 (Q2) in PNP connection 5. When used as analog output QA
Dimensions (unit: mm)
\
button SETbutton button
M12 Connector Pin No.
Switch output Q1 indicator light (orange) DC18-24V±10
monitor Switching output 2 (Q2)/analog output (QA) 0V/analog GND
RETURN button
Switching output 1 (Q1)/IO-Link
Switch output Q2/ External input
Analog output QA indicator (orange)
Power Indicator (Green)
50 27
25.4 4.5 12.5
Receiving center shaft (CD2H-350 /-700 )
Receiving center shaft (CD2H-245 )
2-φ4.5
50.8
through hole
60
55.3
36.5
35.3
28.3
25.8
18.7
10
26.3
))
φ4
φ0.7 Receiving center shaft (CD2H-50
.5
)
Vent hole (do not block)
-
Receiving center shaft (CD2H-30) )
cable type launch center axis
φ4.5 5 cores×0.2mm cable length 2m
Minimum bending radius (cable type, pigtail type):
Cable diameter x 2 (when fixed)
Cable diameter x 6 (when movable)
Connector type
M12 5-pin connector cable length 300mm
04
Specification
Model Cable type LH-A030N/P LH-A050N/P LH-A245N/P LH-A350N/P LH-A700N/P voltage DC18~24V(±10 %)
Connector type LH-A030M12 LH-A050M12 LH-A245M12 LH-A350M12 LH-A700M12 Current consumption 7 80mA (at DC18V), 70mA (at DC24V)
Measuring center distance 30mm 50mm 245mm 350mm 700mm Specification Ver.1.1
Measuring range transfer speed COM3 (230.4kbps)
±5mm ±10mm ±175mm ±250mm ±500mm IO-Link
25 ~ 35mm 40 ~ 60mm 70 ~ 420mm 100 ~ 600mm 200~1200mm process input data bytes 6byte
lightsource medium Red semiconductor laser Minimum cycle time 0.7ms
wavelength 655nm output points 2 points (Q1 can be switched to IO-Link)
switch output
Maximumoutputpower 0.39mW 1mW (Q1/Q2) 8 type NPN/PNP open collector output or push-pull output (switchable within the function)
laserclass JIS/IEC/FDA*1 CLASS 1 CLASS 2 electric current 4~20mA, load impedance: below 300Ω
Analog output Q A 8
Spotsize 2
Φ50μm Φ70μm .
Φ0.5mm .
Φ0.5mm Φ1.0mm Voltage 0~10V, output impedance: below 100Ω
Linear Accuracy External input 9 Not in use/external teaching/hold/zero function/laser off switchable
Measuring range 0.9-inch organic EL display (128×36 pixels)
200 ~ 700mm: monitor Display language: English / German / Spanish / Japanese / Chinese (Simplified) / Chinese
±0.1% F.S. ±0.1% F.S. ±0.1% F.S. ±0.1% F.S. ±0.1% F.S. (Traditional) / Korean
±0.01mm ±0.02mm ±0.35mm ±0.35mm (±1mm)
indicator light Power indicator (green) / output indicator (orange x 2) / IO-Link communication (green light flashes)
Measuring range
700 ~ 1200mm: Cable type: cable length 2m, φ4.5
±0.3% F.S. Pigtail type: M12 5-pin connection cable length 300mm, φ4.5
(±3mm) Connection Type
Minimum bending radius: cable diameter x 2 (when fixed), cable diameter x 6 (when movable)
Resolution 3 0.25μm 0.25μm 10μm 20μm 100μm protect the circuit Reverse connection protection, overcurrent protection function
Repeatability 4 0.25μm 0.25μm 10μm 20μm 100μm degree of protection IP67 (including pigtail connector)
Environmen
Samplingperiod 5 133.3μs/150μs/200μs/300μs/500μs/1ms/2ms/5ms/Auto Use ambient temperature/humidity -10~+50 /35~85% RH (no condensation or icing)
tal
Temperature DriftCharacteristics 6 resistance Storage ambient temperature/humidity -20~+60 /35~8 5% RH (no condensation or icing)
±0.06% F.S./
weight Cable type: about 140g Pigtail type: about 90g. Use ambient illuminance Incandescent lamp: below 10000lx, fluorescent lamp: below 10000lx
Anti-vibration 110~55Hz double amplitude 1.5mm X , Y , Z each direction for 2 hours
[Measurement conditions] Unless otherwise specified, the measurement is performed under the following measurement conditions.
Ambient temperature: 25°C (normal temperature), power supply voltage: DC24V, sampling period: 200μs, moving average times: 4, median filter: 31, measurement center distance, standard Impact resistant About 50G(500m/s²) X , Y , Z each direction 3 times
measured object (white ceramic).
In addition, the sensor is fixed with an aluminum jig for measurement. EMC EMC Directive (2014/30/EU)
Applica
1 According to the regulations of FDA Laser Notice No.56, it is classified according to the standard of IEC60825-1:2014. ble surroundings RoHS Directive (2011/65/EU), China RoHS (Directive No. 32)
. laws
2. Measure 1/e² (13.5%) of the intensity from center to center. In addition to the specified spot size, there is light leakage. If there are objects with high reflectivity around the detection distance, Safety FDA regulations (21 CFR 1040.10 and 1040.11) 10
it may be affected by it.
Applicable specifications EN 60947-5-2, IEC 60825-1
3. When the distance between the sensor and the target changes step by step, the minimum size that can be judged (when the average number of samples is 512 times).
NRTL certification Reserve
4. Peak-to-peak value of measured values when measuring in a stationary state (when the average number of samples is 512 times) Noise resistance: Feilen Level 3 clear
internal specifications
5. In the initial state, it is set to 200μs. Preheat time about 30 minutes
6 A typical example of measuring with the sensor and the object to be measured (white ceramic) fixed on an aluminum jig. The distance of the measured object is the measurement center distance. material Housing: PBT Lens: PMMA
7. Q2 is set to the value when the analog output (current) cannot be measured (the current output is 21mA).
8. In the initial state, it is set to analog current output.
9. In the initial state, the laser is set to OFF.
10. Differences except Laser Notice No.56
Shenzhen Xaori Technology Co., Ltd.
Company Address: Kunhong Commercial Building, Xinhe Avenue, Shajing Street, Baoan District, Shenzhen,
Guangdong Province
The contents of this catalog are as of January 2022.
http://www.xaorisensor.com Consulting hotline: 8613691675252
