FPGA Programming Software

Message Reference
Release 2024-A – May 2024
How to Contact dSPACE
Mail: dSPACE GmbH
Rathenaustraße 26
33102 Paderborn
Germany
Tel.: +49 5251 1638-0
E-mail: [email protected]
Web: https://www.dspace.com

How to Contact dSPACE Support

If you encounter a problem when using dSPACE products, contact your local dSPACE
representative:
§ Local dSPACE companies and distributors: https://www.dspace.com/go/locations
§ For countries not listed, contact dSPACE GmbH in Paderborn, Germany.
Tel.: +49 5251 1638-941 or e-mail: [email protected]

You can also use the support request form: https://www.dspace.com/go/supportrequest. If

you are logged on to mydSPACE, you are automatically identified and do not have to add
your contact details manually.

If possible, always provide the serial number of the hardware, the relevant dSPACE License
ID, or the serial number of the CmContainer in your support request.

Software Updates and Patches

dSPACE strongly recommends that you download and install the most recent patches
for your current dSPACE installation. Visit https://www.dspace.com/go/patches for the
software updates and patches themselves and for more information, such as how to
receive an automatic notification when an update or a patch is available for your dSPACE
software.

Important Notice
This publication contains proprietary information that is protected by copyright. All rights
are reserved. The publication may be printed for personal or internal use provided all the
proprietary markings are retained on all printed copies. In all other cases, the publication
must not be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form, in whole or in part, without the prior written consent
of dSPACE GmbH.

© 2023 - 2024 by:

dSPACE GmbH
Rathenaustraße 26
33102 Paderborn
Germany

This publication and the contents hereof are subject to change without notice.

AURELION, AUTERA, ConfigurationDesk, ControlDesk, MicroAutoBox, MicroLabBox,

SCALEXIO, SIMPHERA, SYNECT, SystemDesk, TargetLink, and VEOS are registered
trademarks of dSPACE GmbH in the United States or other countries, or both. Other
brand names or product names are trademarks or registered trademarks of their respective
companies or organizations.
 Contents

Contents

About This Reference 13

Display of Messages 15
Display of Messages...................................................................................... 15

FPGA Programming Software Message Reference 17

Messages for FPGA Programming Software............................................................ 18
E01001......................................................................................................... 28
E01002......................................................................................................... 29
E01003......................................................................................................... 29
E01004......................................................................................................... 30
E01005......................................................................................................... 30
W01006........................................................................................... ............ 30
W01010........................................................................................... ............ 31
W01011........................................................................................... ............ 31
W01012........................................................................................... ............ 31
W01013........................................................................................... ............ 32
W01014........................................................................................... ............ 32
W01015........................................................................................... ............ 33
W01016........................................................................................... ............ 33
W01017........................................................................................... ............ 33
W01018........................................................................................... ............ 34
W01019........................................................................................... ............ 34
W01020........................................................................................... ............ 34
W01023........................................................................................... ............ 35
W01024........................................................................................... ............ 35
W01025........................................................................................... ............ 35
W01026........................................................................................... ............ 36
W01027........................................................................................... ............ 36
W01028........................................................................................... ............ 36
W01029........................................................................................... ............ 37
W01030........................................................................................... ............ 37
W01031........................................................................................... ............ 38
W01032........................................................................................... ............ 38
W01033........................................................................................... ............ 38
W01034........................................................................................... ............ 39
W01035........................................................................................... ............ 39

3
May 2024 FPGA Programming Software Message Reference
 Contents

W01036........................................................................................... ............ 40
W01037........................................................................................... ............ 40
W01038........................................................................................... ............ 40
W01039........................................................................................... ............ 41
W01040........................................................................................... ............ 41
N01041............................................................................................ ............ 42
Q01100........................................................................................................ 42
Q01101........................................................................................................ 42
Q01102........................................................................................................ 43
Q01103........................................................................................................ 43
Q01104........................................................................................................ 43
Q01105........................................................................................................ 44
Q01106........................................................................................................ 44
Q01107........................................................................................................ 44
Q01108........................................................................................................ 45
Q01109........................................................................................................ 45
Q01110........................................................................................................ 45
Q01111........................................................................................................ 46
Q01112........................................................................................................ 46
Q01113........................................................................................................ 46
Q01114........................................................................................................ 47
Q01115........................................................................................................ 47
Q01116........................................................................................................ 48
Q01117........................................................................................................ 48
Q01118........................................................................................................ 48
Q01119........................................................................................................ 49
Q01120........................................................................................................ 49
Q01121........................................................................................................ 50
Q01122........................................................................................................ 50
Q01123........................................................................................................ 50
N01200............................................................................................ ............ 51
N01201............................................................................................ ............ 51
N01202............................................................................................ ............ 51
N01203............................................................................................ ............ 52
N01204............................................................................................ ............ 52
N01205............................................................................................ ............ 52
N01206............................................................................................ ............ 53
N01207............................................................................................ ............ 53
N01208............................................................................................ ............ 53
N01209............................................................................................ ............ 54
N01210............................................................................................ ............ 54
N01211............................................................................................ ............ 55
N01212............................................................................................ ............ 55

4
FPGA Programming Software Message Reference May 2024
 Contents

N01213............................................................................................ ............ 55
N01214............................................................................................ ............ 56
N01215............................................................................................ ............ 56
N01216............................................................................................ ............ 56
N01217............................................................................................ ............ 57
N01218............................................................................................ ............ 57
N01219............................................................................................ ............ 57
N01220............................................................................................ ............ 58
N01221............................................................................................ ............ 58
N01222............................................................................................ ............ 58
N01223............................................................................................ ............ 59
N01224............................................................................................ ............ 59
N01225............................................................................................ ............ 59
N01226............................................................................................ ............ 60
N01227............................................................................................ ............ 60
N01228............................................................................................ ............ 60
N01229............................................................................................ ............ 61
N01230............................................................................................ ............ 61
N01231............................................................................................ ............ 61
N01232............................................................................................ ............ 62
N01233............................................................................................ ............ 62
N01234............................................................................................ ............ 63
N01235............................................................................................ ............ 63
N01236............................................................................................ ............ 63
N01237............................................................................................ ............ 64
N01238............................................................................................ ............ 64
N01239............................................................................................ ............ 64
N01240............................................................................................ ............ 65
N01241............................................................................................ ............ 65
N01242............................................................................................ ............ 65
N01243............................................................................................ ............ 66
N01244............................................................................................ ............ 66
E02008......................................................................................................... 66
E02009......................................................................................................... 67
E02010......................................................................................................... 67
E02014......................................................................................................... 67
E02015......................................................................................................... 68
E02016......................................................................................................... 68
E02018......................................................................................................... 69
E02019......................................................................................................... 69
E02023......................................................................................................... 69
E02024......................................................................................................... 70
E02025......................................................................................................... 70

5
May 2024 FPGA Programming Software Message Reference
 Contents

E02028......................................................................................................... 70
E02029......................................................................................................... 71
E02030......................................................................................................... 71
E02031......................................................................................................... 71
E02032......................................................................................................... 72
E02033......................................................................................................... 72
E02034......................................................................................................... 73
E02035......................................................................................................... 73
E02036......................................................................................................... 73
E02037......................................................................................................... 74
E02038......................................................................................................... 74
E02039......................................................................................................... 74
E02040......................................................................................................... 75
E02041......................................................................................................... 75
E02042......................................................................................................... 75
E02043......................................................................................................... 76
E02044......................................................................................................... 76
E02045......................................................................................................... 76
E02046......................................................................................................... 77
E02047......................................................................................................... 77
E02048......................................................................................................... 77
E02049......................................................................................................... 78
E02050......................................................................................................... 78
E02051......................................................................................................... 78
E02052......................................................................................................... 79
E02053......................................................................................................... 79
E02055......................................................................................................... 79
W02056........................................................................................... ............ 80
E02058......................................................................................................... 80
E02059......................................................................................................... 80
E02061......................................................................................................... 81
E02063......................................................................................................... 81
E02064......................................................................................................... 81
E02065......................................................................................................... 82
E02070......................................................................................................... 82
E02074......................................................................................................... 82
E02075......................................................................................................... 83
E02077......................................................................................................... 83
E02078......................................................................................................... 83
E02080......................................................................................................... 84
E02082......................................................................................................... 84
E02083......................................................................................................... 84
W02086........................................................................................... ............ 85

6
FPGA Programming Software Message Reference May 2024
 Contents

E02090......................................................................................................... 85
E02091......................................................................................................... 85
E02092......................................................................................................... 86
E02093......................................................................................................... 86
E02095......................................................................................................... 86
E02096......................................................................................................... 87
E02098......................................................................................................... 87
E02099......................................................................................................... 87
E02100......................................................................................................... 88
E02101......................................................................................................... 88
E02102......................................................................................................... 88
E02103......................................................................................................... 89
E03001......................................................................................................... 89
E03002......................................................................................................... 89
E03100......................................................................................................... 90
E03101......................................................................................................... 90
E03102......................................................................................................... 91
E03103......................................................................................................... 92
E03104......................................................................................................... 92
E03106......................................................................................................... 92
E03107......................................................................................................... 93
E03108......................................................................................................... 93
E03109......................................................................................................... 93
E03110......................................................................................................... 94
E03111......................................................................................................... 94
E03112......................................................................................................... 94
E03113......................................................................................................... 95
E03114......................................................................................................... 95
E03115......................................................................................................... 95
E03116......................................................................................................... 96
E03117......................................................................................................... 96
E03118......................................................................................................... 96
E03119......................................................................................................... 97
E03120......................................................................................................... 97
E03121......................................................................................................... 97
E03122......................................................................................................... 98
E03123......................................................................................................... 98
E03124......................................................................................................... 98
E03125......................................................................................................... 99
E03126......................................................................................................... 99
E03127......................................................................................................... 99
E03128....................................................................................................... 100
E03129....................................................................................................... 100

7
May 2024 FPGA Programming Software Message Reference
 Contents

E03130....................................................................................................... 100
E03131....................................................................................................... 101
E03132....................................................................................................... 101
E03133....................................................................................................... 101
E03134....................................................................................................... 102
E03135....................................................................................................... 102
E03136....................................................................................................... 102
E03137....................................................................................................... 103
E03138....................................................................................................... 103
E03139....................................................................................................... 103
E03140....................................................................................................... 104
E03141....................................................................................................... 104
E03142....................................................................................................... 104
E03143....................................................................................................... 105
E03144....................................................................................................... 105
E03145....................................................................................................... 105
E03146....................................................................................................... 106
E03147....................................................................................................... 106
E03148....................................................................................................... 106
E03149....................................................................................................... 107
E03150....................................................................................................... 107
E03151....................................................................................................... 107
E03152....................................................................................................... 108
E03153....................................................................................................... 108
E03154....................................................................................................... 108
E03155....................................................................................................... 109
E03156....................................................................................................... 109
E03158....................................................................................................... 110
E03159....................................................................................................... 110
E03160....................................................................................................... 110
E03161....................................................................................................... 111
E03162....................................................................................................... 111
E03163....................................................................................................... 112
E03164....................................................................................................... 112
E03165....................................................................................................... 112
E03166....................................................................................................... 113
E03167....................................................................................................... 113
E03168....................................................................................................... 113
E03169....................................................................................................... 114
E03170....................................................................................................... 114
E03171....................................................................................................... 114
E03172....................................................................................................... 115
E03173....................................................................................................... 115

8
FPGA Programming Software Message Reference May 2024
 Contents

E03174....................................................................................................... 115
E03175....................................................................................................... 116
E03176....................................................................................................... 116
E03177....................................................................................................... 116
E03178....................................................................................................... 117
E03179....................................................................................................... 117
E03180....................................................................................................... 118
E03181....................................................................................................... 118
E03182....................................................................................................... 118
E03183....................................................................................................... 119
E03184....................................................................................................... 119
E03185....................................................................................................... 119
E03186....................................................................................................... 120
E03187....................................................................................................... 120
E03188....................................................................................................... 120
E03189....................................................................................................... 121
E03190....................................................................................................... 121
E03191....................................................................................................... 121
E03192....................................................................................................... 122
E03193....................................................................................................... 122
E03194....................................................................................................... 122
E03195....................................................................................................... 123
E03196....................................................................................................... 123
E03197....................................................................................................... 124
E03198....................................................................................................... 124
E03199....................................................................................................... 124
E03200....................................................................................................... 125
E03201....................................................................................................... 125
E03202....................................................................................................... 125
E03203....................................................................................................... 126
E03204....................................................................................................... 126
E03205....................................................................................................... 126
E03206....................................................................................................... 127
E03207....................................................................................................... 127
E03208....................................................................................................... 127
E03209....................................................................................................... 128
E03210....................................................................................................... 128
E03211....................................................................................................... 128
E03212....................................................................................................... 129
E03213....................................................................................................... 129
E03214....................................................................................................... 129
E03215....................................................................................................... 130
E03216....................................................................................................... 130

9
May 2024 FPGA Programming Software Message Reference
 Contents

E03217....................................................................................................... 130
E03218....................................................................................................... 131
E03219....................................................................................................... 131
E03220....................................................................................................... 131
E03221....................................................................................................... 132
E03222....................................................................................................... 132
E03223....................................................................................................... 132
E03224....................................................................................................... 133
E03225....................................................................................................... 133
E03226....................................................................................................... 133
E03227....................................................................................................... 134
E03228....................................................................................................... 134
E03229....................................................................................................... 134
E03230....................................................................................................... 135
E03231....................................................................................................... 135
E03232....................................................................................................... 135
E03233....................................................................................................... 136
E03234....................................................................................................... 136
E03235....................................................................................................... 136
E03236....................................................................................................... 137
E03237....................................................................................................... 137
E03238....................................................................................................... 137
E03239....................................................................................................... 138
E03240....................................................................................................... 138
E03241....................................................................................................... 139
E03242....................................................................................................... 139
E03243....................................................................................................... 139
E03244....................................................................................................... 140
E03245....................................................................................................... 140
E03246....................................................................................................... 140
E03247....................................................................................................... 141
E03248....................................................................................................... 141
E03250....................................................................................................... 141
E03251....................................................................................................... 142
E03252....................................................................................................... 142
E03253....................................................................................................... 142
E03254....................................................................................................... 143
E03255....................................................................................................... 143
E03256....................................................................................................... 143
E03257....................................................................................................... 144
E03258....................................................................................................... 144
E03259....................................................................................................... 144
E03260....................................................................................................... 145

10
FPGA Programming Software Message Reference May 2024
 Contents

E03261....................................................................................................... 145
E03262....................................................................................................... 146
E03263....................................................................................................... 146
E03264....................................................................................................... 146
E03265....................................................................................................... 147
E03266....................................................................................................... 147
N03267............................................................................................ .......... 147
E03268....................................................................................................... 148
E03269....................................................................................................... 148

11
May 2024 FPGA Programming Software Message Reference
 Contents

12
FPGA Programming Software Message Reference May 2024
 About This Reference

About This Reference

Categorization of messages All FPGA Programming Blockset messages are categorized according to cause
and additionally classified by severity level: note (N), warning (W), error (E) and
question (Q). For details, refer to Display of Messages on page 15.

Symbols dSPACE user documentation uses the following symbols:

Symbol Description
Indicates a hazardous situation that, if not avoided,
V DANGER
will result in death or serious injury.
Indicates a hazardous situation that, if not avoided,
V WARNING could result in death or serious injury.
Indicates a hazardous situation that, if not avoided,
V CAUTION could result in minor or moderate injury.
Indicates a hazard that, if not avoided, could result in
NOTICE
property damage.
Indicates important information that you should take
Note
into account to avoid malfunctions.
Indicates tips that can make your work easier.
Tip
Indicates a link that refers to a definition in the
glossary, which you can find at the end of the
document unless stated otherwise.
Follows the document title in a link that refers to
another document.

Naming conventions dSPACE user documentation uses the following naming conventions:

%name% Names enclosed in percent signs refer to environment variables for

file and path names.

<> Angle brackets contain wildcard characters or placeholders for variable

file and path names, etc.

13
May 2024 FPGA Programming Software Message Reference
 About This Reference

Special Windows folders Windows‑based software products use the following special folders:

Common Program Data folder A standard folder for application-specific

program data that is used by all users.
%PROGRAMDATA%\dSPACE\<InstallationGUID>\<ProductName>
or
%PROGRAMDATA%\dSPACE\<ProductName>\<VersionNumber>

Documents folder A standard folder for application‑specific files that are

used by the current user.
%USERPROFILE%\Documents\dSPACE\<ProductName>\<VersionNumber>

Local Program Data folder A standard folder for application-specific

program data that is used by the current user.
%USERPROFILE%\AppData\Local\dSPACE\<InstallationGUID>\
<ProductName>

Accessing dSPACE Help and After you install and decrypt Windows‑based dSPACE software, the
PDF files documentation for the installed products is available in dSPACE Help and as PDF
files.

dSPACE Help (local) You can open your local installation of dSPACE Help:
§ On its home page via Windows Start Menu
§ On specific content using context-sensitive help via F1

PDF files You can access PDF files via the icon in dSPACE Help. The PDF
opens on the first page.

dSPACE Help (Web) Independently of the software installation, you can

access the Web version of dSPACE Help at https://www.dspace.com/go/help.
To access the Web version, you must have a mydSPACE account.
For more information on the mydSPACE registration process, refer to
https://www.dspace.com/faq?097.

14
FPGA Programming Software Message Reference May 2024
 Display of Messages

Display of Messages

Display of Messages

Introduction When you work with the FPGA Programming Blockset, messages inform you
about possible problems or upcoming actions. The messages are issued in the
MATLAB Command Window or in dialogs. They provide links and/or buttons
for you to open the related topic in the FPGA Programming Blockset Message
Reference, which contains more information.

Message types The following message types are available:

§ Error (E)
Error messages give you information about failed actions. They might be
preceded or followed by other messages that describe the reason for the error
in more detail.
§ Warning (W)
Warnings give you hints about model parameters that might cause concern or
issues, for example.
§ Note (N)
Notes give you information about successfully completed actions. They do not
require any action or confirmation.
§ Question (Q)
Questions prompt your confirmation before a specific action is performed.

Message format in the Messages displayed in the MATLAB Command Window have the following
MATLAB Command Window format:
<message type> #<number>: <title> <message>

15
May 2024 FPGA Programming Software Message Reference
 Display of Messages

Placeholder Description
<message Displays the message type. In the MATLAB Command
type> Window, the following message types are displayed:
§ Error
§ Warning
§ Note

Note

Questions are always displayed in message dialogs.

<number> Shows you the number (unique ID) of the message.

Clicking the number opens the related topic in the
FPGA Programming Blockset Message Reference for more
information.
<title> Shows the title of the message.
<message> Contains detailed information about the problem. It can
also contain links to model elements that caused the error.
Clicking the links highlights the related elements in the
model.

Message dialogs Messages issued in dialogs prompt you to confirm the upcoming action or to
decline it, respectively. Additionally, the message dialogs provide a Help button
that lets you open the related topic in the FPGA Programming Software Message
Reference for more information.

16
FPGA Programming Software Message Reference May 2024
 FPGA Programming Software Message Reference

FPGA Programming Software Message Reference

17
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Messages for FPGA Programming Software

Where to go from here Information in this section

E01001................................................................................................... 28

E01002................................................................................................... 29

E01003................................................................................................... 29

E01004................................................................................................... 30

E01005................................................................................................... 30

W01006.................................................................................................. 30

W01010.................................................................................................. 31

W01011.................................................................................................. 31

W01012.................................................................................................. 31

W01013.................................................................................................. 32

W01014.................................................................................................. 32

W01015.................................................................................................. 33

W01016.................................................................................................. 33

W01017.................................................................................................. 33

W01018.................................................................................................. 34

W01019.................................................................................................. 34

W01020.................................................................................................. 34

W01023.................................................................................................. 35

W01024.................................................................................................. 35

W01025.................................................................................................. 35

W01026.................................................................................................. 36

W01027.................................................................................................. 36

W01028.................................................................................................. 36

W01029.................................................................................................. 37

W01030.................................................................................................. 37

W01031.................................................................................................. 38

W01032.................................................................................................. 38

W01033.................................................................................................. 38

W01034.................................................................................................. 39

18
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

W01035.................................................................................................. 39

W01036.................................................................................................. 40

W01037.................................................................................................. 40

W01038.................................................................................................. 40

W01039.................................................................................................. 41

W01040.................................................................................................. 41

N01041................................................................................................... 42

Q01100................................................................................................... 42

Q01101................................................................................................... 42

Q01102................................................................................................... 43

Q01103................................................................................................... 43

Q01104................................................................................................... 43

Q01105................................................................................................... 44

Q01106................................................................................................... 44

Q01107................................................................................................... 44

Q01108................................................................................................... 45

Q01109................................................................................................... 45

Q01110................................................................................................... 45

Q01111................................................................................................... 46

Q01112................................................................................................... 46

Q01113................................................................................................... 46

Q01114................................................................................................... 47

Q01115................................................................................................... 47

Q01116................................................................................................... 48

Q01117................................................................................................... 48

Q01118................................................................................................... 48

Q01119................................................................................................... 49

Q01120................................................................................................... 49

Q01121................................................................................................... 50

Q01122................................................................................................... 50

Q01123................................................................................................... 50

N01200................................................................................................... 51

19
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

N01201................................................................................................... 51

N01202................................................................................................... 51

N01203................................................................................................... 52

N01204................................................................................................... 52

N01205................................................................................................... 52

N01206................................................................................................... 53

N01207................................................................................................... 53

N01208................................................................................................... 53

N01209................................................................................................... 54

N01210................................................................................................... 54

N01211................................................................................................... 55

N01212................................................................................................... 55

N01213................................................................................................... 55

N01214................................................................................................... 56

N01215................................................................................................... 56

N01216................................................................................................... 56

N01217................................................................................................... 57

N01218................................................................................................... 57

N01219................................................................................................... 57

N01220................................................................................................... 58

N01221................................................................................................... 58

N01222................................................................................................... 58

N01223................................................................................................... 59

N01224................................................................................................... 59

N01225................................................................................................... 59

N01226................................................................................................... 60

N01227................................................................................................... 60

N01228................................................................................................... 60

N01229................................................................................................... 61

N01230................................................................................................... 61

N01231................................................................................................... 61

N01232................................................................................................... 62

20
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

N01233................................................................................................... 62

N01234................................................................................................... 63

N01235................................................................................................... 63

N01236................................................................................................... 63

N01237................................................................................................... 64

N01238................................................................................................... 64

N01239................................................................................................... 64

N01240................................................................................................... 65

N01241................................................................................................... 65

N01242................................................................................................... 65

N01243................................................................................................... 66

N01244................................................................................................... 66

E02008................................................................................................... 66

E02009................................................................................................... 67

E02010................................................................................................... 67

E02014................................................................................................... 67

E02015................................................................................................... 68

E02016................................................................................................... 68

E02018................................................................................................... 69

E02019................................................................................................... 69

E02023................................................................................................... 69

E02024................................................................................................... 70

E02025................................................................................................... 70

E02028................................................................................................... 70

E02029................................................................................................... 71

E02030................................................................................................... 71

E02031................................................................................................... 71

E02032................................................................................................... 72

E02033................................................................................................... 72

E02034................................................................................................... 73

E02035................................................................................................... 73

E02036................................................................................................... 73

21
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E02037................................................................................................... 74

E02038................................................................................................... 74

E02039................................................................................................... 74

E02040................................................................................................... 75

E02041................................................................................................... 75

E02042................................................................................................... 75

E02043................................................................................................... 76

E02044................................................................................................... 76

E02045................................................................................................... 76

E02046................................................................................................... 77

E02047................................................................................................... 77

E02048................................................................................................... 77

E02049................................................................................................... 78

E02050................................................................................................... 78

E02051................................................................................................... 78

E02052................................................................................................... 79

E02053................................................................................................... 79

E02055................................................................................................... 79

W02056.................................................................................................. 80

E02058................................................................................................... 80

E02059................................................................................................... 80

E02061................................................................................................... 81

E02063................................................................................................... 81

E02064................................................................................................... 81

E02065................................................................................................... 82

E02070................................................................................................... 82

E02074................................................................................................... 82

E02075................................................................................................... 83

E02077................................................................................................... 83

E02078................................................................................................... 83

E02080................................................................................................... 84

E02082................................................................................................... 84

22
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02083................................................................................................... 84

W02086.................................................................................................. 85

E02090................................................................................................... 85

E02091................................................................................................... 85

E02092................................................................................................... 86

E02093................................................................................................... 86

E02095................................................................................................... 86

E02096................................................................................................... 87

E02098................................................................................................... 87

E02099................................................................................................... 87

E02100................................................................................................... 88

E02101................................................................................................... 88

E02102................................................................................................... 88

E02103................................................................................................... 89

E03001................................................................................................... 89

E03002................................................................................................... 89

E03100................................................................................................... 90

E03101................................................................................................... 90

E03102................................................................................................... 91

E03103................................................................................................... 92

E03104................................................................................................... 92

E03106................................................................................................... 92

E03107................................................................................................... 93

E03108................................................................................................... 93

E03109................................................................................................... 93

E03110................................................................................................... 94

E03111................................................................................................... 94

E03112................................................................................................... 94

E03113................................................................................................... 95

E03114................................................................................................... 95

E03115................................................................................................... 95

E03116................................................................................................... 96

23
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03117................................................................................................... 96

E03118................................................................................................... 96

E03119................................................................................................... 97

E03120................................................................................................... 97

E03121................................................................................................... 97

E03122................................................................................................... 98

E03123................................................................................................... 98

E03124................................................................................................... 98

E03125................................................................................................... 99

E03126................................................................................................... 99

E03127................................................................................................... 99

E03128................................................................................................. 100

E03129................................................................................................. 100

E03130................................................................................................. 100

E03131................................................................................................. 101

E03132................................................................................................. 101

E03133................................................................................................. 101

E03134................................................................................................. 102

E03135................................................................................................. 102

E03136................................................................................................. 102

E03137................................................................................................. 103

E03138................................................................................................. 103

E03139................................................................................................. 103

E03140................................................................................................. 104

E03141................................................................................................. 104

E03142................................................................................................. 104

E03143................................................................................................. 105

E03144................................................................................................. 105

E03145................................................................................................. 105

E03146................................................................................................. 106

E03147................................................................................................. 106

E03148................................................................................................. 106

24
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03149................................................................................................. 107

E03150................................................................................................. 107

E03151................................................................................................. 107

E03152................................................................................................. 108

E03153................................................................................................. 108

E03154................................................................................................. 108

E03155................................................................................................. 109

E03156................................................................................................. 109

E03158................................................................................................. 110

E03159................................................................................................. 110

E03160................................................................................................. 110

E03161................................................................................................. 111

E03162................................................................................................. 111

E03163................................................................................................. 112

E03164................................................................................................. 112

E03165................................................................................................. 112

E03166................................................................................................. 113

E03167................................................................................................. 113

E03168................................................................................................. 113

E03169................................................................................................. 114

E03170................................................................................................. 114

E03171................................................................................................. 114

E03172................................................................................................. 115

E03173................................................................................................. 115

E03174................................................................................................. 115

E03175................................................................................................. 116

E03176................................................................................................. 116

E03177................................................................................................. 116

E03178................................................................................................. 117

E03179................................................................................................. 117

E03180................................................................................................. 118

E03181................................................................................................. 118

25
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03182................................................................................................. 118

E03183................................................................................................. 119

E03184................................................................................................. 119

E03185................................................................................................. 119

E03186................................................................................................. 120

E03187................................................................................................. 120

E03188................................................................................................. 120

E03189................................................................................................. 121

E03190................................................................................................. 121

E03191................................................................................................. 121

E03192................................................................................................. 122

E03193................................................................................................. 122

E03194................................................................................................. 122

E03195................................................................................................. 123

E03196................................................................................................. 123

E03197................................................................................................. 124

E03198................................................................................................. 124

E03199................................................................................................. 124

E03200................................................................................................. 125

E03201................................................................................................. 125

E03202................................................................................................. 125

E03203................................................................................................. 126

E03204................................................................................................. 126

E03205................................................................................................. 126

E03206................................................................................................. 127

E03207................................................................................................. 127

E03208................................................................................................. 127

E03209................................................................................................. 128

E03210................................................................................................. 128

E03211................................................................................................. 128

E03212................................................................................................. 129

E03213................................................................................................. 129

26
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03214................................................................................................. 129

E03215................................................................................................. 130

E03216................................................................................................. 130

E03217................................................................................................. 130

E03218................................................................................................. 131

E03219................................................................................................. 131

E03220................................................................................................. 131

E03221................................................................................................. 132

E03222................................................................................................. 132

E03223................................................................................................. 132

E03224................................................................................................. 133

E03225................................................................................................. 133

E03226................................................................................................. 133

E03227................................................................................................. 134

E03228................................................................................................. 134

E03229................................................................................................. 134

E03230................................................................................................. 135

E03231................................................................................................. 135

E03232................................................................................................. 135

E03233................................................................................................. 136

E03234................................................................................................. 136

E03235................................................................................................. 136

E03236................................................................................................. 137

E03237................................................................................................. 137

E03238................................................................................................. 137

E03239................................................................................................. 138

E03240................................................................................................. 138

E03241................................................................................................. 139

E03242................................................................................................. 139

E03243................................................................................................. 139

E03244................................................................................................. 140

E03245................................................................................................. 140

27
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03246................................................................................................. 140

E03247................................................................................................. 141

E03248................................................................................................. 141

E03250................................................................................................. 141

E03251................................................................................................. 142

E03252................................................................................................. 142

E03253................................................................................................. 142

E03254................................................................................................. 143

E03255................................................................................................. 143

E03256................................................................................................. 143

E03257................................................................................................. 144

E03258................................................................................................. 144

E03259................................................................................................. 144

E03260................................................................................................. 145

E03261................................................................................................. 145

E03262................................................................................................. 146

E03263................................................................................................. 146

E03264................................................................................................. 146

E03265................................................................................................. 147

E03266................................................................................................. 147

N03267................................................................................................. 147

E03268................................................................................................. 148

E03269................................................................................................. 148

E01001

Message Could not read preferences from the following folder due to invalid
configurations: %1. %2

Message parameters § Folder path

§ More details

28
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason The RTIFPGA.ucd file in the specified folder contains invalid content. The
message provides the reason for the problem.

Solution Check the error message to find the reason for the problem. Delete the file or fix
the file so it contains only valid content.

E01002

Message Could not read the %1 preference. %2

Message parameters § Preference name

§ More details

Reason Could not read FPGA preferences from the RTIFPGA.ucd file in the specified
folder. The message provides the reason for the problem.

Solution Check the error message to find the reason for the problem. Make sure to have
read/write access to the file.

E01003

Message Could not write the %1 preference. %2

Message parameters § Preference name

§ More details

Reason Could not write the FPGA preference. The message provides the reason for the
problem.

Solution Check the error message to find the reason for the problem. Make sure that the
written value is valid.

29
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E01004

Message Could not save preferences to the following file: %1. %2

Message parameters § File name

§ More details

Reason FPGA preferences could not be saved to the specified file. The message provides
the reason for the problem.

Solution Check the error message to find the reason for the problem. Make sure to have
write access to the file.

E01005

Message Could not load preferences from the following file: %1. %2

Message parameters § File name

§ More details

Reason Could not load FPGA preferences from the specified file. The message provides
the reason for the problem.

Solution Check the error message for find the reason of the problem. Make sure that the
file exists.

W01006

Message The old preference (%1) was migrated to a new one (%2).

Message parameters § Old preference

§ New preference

30
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason The naming rules of the preferences have been unified since Release 2023-A.
Some old preferences will be migrated to the new one automatically.

Solution -

W01010

Message There are no free corresponding interrupt channels available in the FPGA model.

Message parameters -

Reason -

Solution -

W01011

Message There are no free corresponding xdata channels available in the FPGA model.

Message parameters -

Reason -

Solution -

W01012

Message The selected file is already on the list of FPGA container files. Each file on the list
can be assigned to multiple FPGA boards on the FPGA configuration panel.

31
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters -

Reason -

Solution -

W01013

Message Could not find one or more FPGA model subsystems. The following subsystem
board assignments were lost: %1.

Message parameters § Board or subsystems

Reason -

Solution -

W01014

Message The selected subsystem or FPGA container file does not contain processor
interface blocks. A processor interface can be generated only for systems
containing XDATA read/write blocks or FPGA interrupts.

Message parameters -

Reason -

Solution -

32
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

W01015

Message Found the following interface incompatibility: %1.

Message parameters § Detailed messages

Reason -

Solution -

W01016

Message Close all instances of Vitis Model Composer.

Message parameters -

Reason -

Solution -

W01017

Message Could not find the FPGA model subsystems. The following subsystem clock
assignments were lost: %1.

Message parameters § Board or subsystems

Reason -

Solution -

33
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

W01018

Message You have to install the following Xilinx Vitis Model Composer code generation
patch: %1.

Message parameters § Link to the patch

Reason -

Solution -

W01019

Message Could not open the following demo model: %1. %2

Message parameters § Demo model name

§ Detailed messages

Reason -

Solution Check your dSPACE installation.

W01020

Message Could not copy the demo model from %1 to %2. Error message: %3

Message parameters § Demo model path

§ Destination path
§ Detailed messages

Reason -

34
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

W01023

Message The XSG version does not match the Xilinx Vivado version.

Message parameters -

Reason -

Solution -

W01024

Message First, select 'Bus Creator', 'Bus Selector', 'Inport', or 'Outport' as the current
block.

Message parameters -

Reason -

Solution -

W01025

Message The bus contains invalid signal names which cannot be used for Simulink.Signal
objects (Refer to matlab.lang.makeValidName). Rename the signals as suggested,
but make sure the names are unique: %1.

Message parameters § Signal in bus

35
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

W01026

Message An exception occurred in the following block: %1. Could not save the bus
topology: %2. Also check the problem by performing a manual update (Ctrl+D).

Message parameters § Block full name

§ Exception messages

Reason -

Solution -

W01027

Message An exception occurred at the following block: %1. Could not read the bus
topology, because the model cannot be updated. Check the problem by
performing a manual update (Crtl+D).

Message parameters § Full block name

Reason -

Solution -

W01028

Message A dialog for advanced preferences is already open.

36
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Message parameters -

Reason The dSPACE FPGA Programming Blockset can open only one Advanced
Preferences dialog at the same time.

Solution -

W01029

Message FPGA tracing found the following problems: %1.

Message parameters § Problem details

Reason -

Solution -

W01030

Message Tracing is activated but no subsystems were selected in FPGA Setup lock. Tracing
will not have any effect.

Message parameters -

Reason -

Solution -

37
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

W01031

Message A warning has occurred due to an incorrect number of Setup blocks, which
could be caused by either missing or duplicate blocks.

Message parameters -

Reason -

Solution -

W01032

Message Your user-defined target file has the same name as the default target file (as
per naming convention). This can cause problems in future versions of the FPGA
Programming Kit.

Message parameters -

Reason -

Solution -

W01033

Message Custom floating-point data types are not supported for FPGA trace:
XFLOAT_%1_%2.

Message parameters § Floating-point width

§ Floating-point binary points

Reason -

38
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

W01034

Message Dropping the following variable: %1. FPGA blockset cannot handle data widths
> 64 bits.

Message parameters § Variable name

Reason -

Solution -

W01035

Message The path selected for the build process is currently %1 characters long (max.
recommended: %2 characters). Long build paths might cause problems with file
system operations in the build process. To avoid these problems, make sure, that
the combined slength of working directory name, model name and the name of
the FPGA subsystem to be built is minimized.

Message parameters § Build path length

§ Maximum build path length

Reason -

Solution -

39
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

W01036

Message The following DDR4 Physical Mode block is configured to use a 200 MHz
clock but is located in a nested subsystem: %1. Therefore, the entire top-level
subsystem %2 will be clocked with 200 MHz.

Message parameters § DDR4 Physical Mode block path

§ Subsystem path

Reason -

Solution -

W01037

Message The following custom user clock block is configured to use a custom user
clock but is located in a nested subsystem: %1. Therefore, the entire top-level
subsystem (%2) will be clocked with the custom user clock.

Message parameters § Custom User Clock Block path

§ Subsystem path

Reason -

Solution -

W01038

Message Could not update block %1 of type %2 from framework version

%3 to %4. Update the model with the following command:
rtifpga_scriptinterface("FPGAFrameworkUpdate", <SimulinkModelHandle>)

Message parameters § Block name

§ Block type

40
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

§ Previous version
§ Current version

Reason -

Solution -

W01039

Message The names of %1 blocks have been changed automatically. Please review the
above messages for details.

Message parameters § Number of renamed blocks

Reason -

Solution -

W01040

Message Signal ports disabled. They are not supported by the current ConfigurationDesk
schema.

Set disable_signal_ports = 1 to enable them.

Message parameters -

Reason -

Solution -

41
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

N01041

Message Could not generate the following SIC for the scaling subsystem again: %1.
Skipping this scaling subsystem.

Message parameters § SIC path

Reason -

Solution -

Q01100

Message Do you want to copy all files associated with this demo to your the following
directory to preserve the original demo installations files: %1?

Message parameters § Current directory

Reason -

Solution -

Q01101

Message %1 Do you still want to open %2?

Message parameters § Warning details

§ Demo model name

Reason -

Solution -

42
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Q01102

Message The values of all preferences will be set to default. Do you want to continue?

Message parameters -

Reason -

Solution -

Q01103

Message The version of the FPGA container generated by FPGA Programming Blockset is
incompatible. This might cause a fatal error. Continue anyway?

Message parameters -

Reason -

Solution -

Q01104

Message Model %1 will be saved and changes in the current dialog will be applied.

Message parameters § Model name

Reason -

Solution -

43
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Q01105

Message Model %1 will be saved and changes in the open dialog will be applied.

Message parameters § Model name

Reason -

Solution -

Q01106

Message The %1 model will be saved before each FPGA build.

Message parameters § Model name

Reason -

Solution -

Q01107

Message The model was not saved yet but it is needed for adding the FPGA container file.
Do you want to save the model now?

Message parameters -

Reason -

Solution -

44
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Q01108

Message The %1 FPGA container file is currently assigned to the following boards: %2.
Removing the FPGA container file will clear these assignments. Do you want to
remove the file?

Message parameters § FPGA container file name

§ Names of boards

Reason -

Solution -

Q01109

Message This action removes all items from the FPGA container file list. %1 Do you want
to continue?

Message parameters § FPGA container file details

Reason -

Solution -

Q01110

Message The following FPGA container file seems to be outdated: %1. The interfaces do
not match those of the following subsystem: %2. Do you want to continue and
use the outdated subsystem build?

Message parameters § FPGA container file path

§ Subsystem name

45
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

Q01111

Message The following framework INI file directory is not included in the MATLAB search
path : %1. Do you want to register it now?

Message parameters § Path of the framework INI file

Reason -

Solution -

Q01112

Message The framework INI file might be incompatible with the current FPGA blockset.
Continue anyway?

Message parameters -

Reason -

Solution -

Q01113

Message The Separation Manager found a separation file that belongs to your model. It
seems that no deseparation was executed using this separation file. If you click

46
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

OK, this file will be overwritten. This may lead to the loss of FPGA subsystems
that were removed from the model in former separations.

Message parameters -

Reason -

Solution -

Q01114

Message Could not find a file mandatory for deseperation. Therefore, built a temporary
file during separation. Found a version in a different model format, which is only
up to date if you switched model formats after separation. If you click OK, the
file in the different model format will be used. Your restored FPGA subsystems
might not be up to date.

Message parameters -

Reason -

Solution -

Q01115

Message %1

Do you want to save and close the conflicting dictionary? Otherwise, bus objects
will be generated in the workspace.

Message parameters § Detailed messages

Reason -

47
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

Q01116

Message Could not detect expected version of Xilinx programs. Do you want to continue
anyway?

Message parameters -

Reason -

Solution -

Q01117

Message The versions of Xilinx Vivado and XSG found on your system do not match.
Make sure that you use compatible versions. Do you want to continue anyway?

Message parameters -

Reason -

Solution -

Q01118

Message To perform the FPGA build of a model, the model has to be saved. The FPGA
Programming Blockset can do this for you. Click Cancel if you do not want to
save the model.

Message parameters -

48
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

Q01119

Message For a model to be separated, it has to be saved. The FPGA Programming Blockset
can do this for you. Click Cancel if you do not want to save the model.

Message parameters -

Reason -

Solution -

Q01120

Message To perform the timing analysis of a model, the model has to be saved. The FPGA
Programming Blockset can do this for you. Click Cancel if you do not want to
save the model.

Message parameters -

Reason -

Solution -

49
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Q01121

Message To perform the resource analysis of a model, the model has to be saved. The
FPGA Programming Blockset can do this for you. Click Cancel if you do not want
to save the model.

Message parameters -

Reason -

Solution -

Q01122

Message To perform HDL simulation for a model, the model has to be saved. The FPGA
Programming Blockset can do this for you. Click Cancel if you do not want to
save the model.

Message parameters -

Reason -

Solution -

Q01123

Message Your current working directory is: %1. Do you want to copy the demo model file
to your current directory?

Message parameters § Current directory

Reason -

50
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

N01200

Message Could not find any demos for the selected RTI.

Message parameters -

Reason -

Solution -

N01201

Message Enter a number in the Value field.

Message parameters -

Reason -

Solution -

N01202

Message Found invalid inputs: Only positive numbers can be converted to unsigned fixed-
point numbers. Changing the data type to signed.

Message parameters -

Reason -

51
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

N01203

Message Enter a number in the 'Other word length' field. It must be a positive integer
number.

Message parameters -

Reason -

Solution -

N01204

Message Enter a number in the 'Error [%]' field.

Message parameters -

Reason -

Solution -

N01205

Message Enter a number in the 'Resolution' field that is greater than zero and smaller than
one.

Message parameters -

52
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

N01206

Message Could not find a parameter incompatibility between Simulink and

ConfigurationDesk.

Message parameters -

Reason -

Solution -

N01207

Message Found a parameter incompatibility between Simulink and ConfigurationDesk %1

parameters were imported to Simulink.

Message parameters § Incompatible parameters

Reason -

Solution -

N01208

Message Opening last the timing analysis report found in %1.

53
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters § Timing report path

Reason -

Solution -

N01209

Message Openingthe last report utilization report found in %1.

Message parameters § Utilization report path

Reason -

Solution -

N01210

Message The bus of the following block contains signals >%1 bits: %2. The signals will be
converted by the bus block. You can change the conversion settings in the Signal
Editor of the block %3.

Message parameters § Bits width

§ Block name
§ Details of the signal(s)

Reason -

Solution -

54
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

N01211

Message The FPGA_XDATA_WRITE_BL block has to be set to bus transfer mode first.

Message parameters -

Reason -

Solution -

N01212

Message Updating callbacks for the following %2 block: %1.

Message parameters § Block name

§ Block type

Reason -

Solution -

N01213

Message Updating the following %2 block from framework version %3 to %4 : %1.

Message parameters § Block name

§ Block type
§ Previous version
§ Current version

Reason -

55
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

N01214

Message The build timer is disabled during the FPGA build.

Message parameters -

Reason -

Solution -

N01215

Message Disabling offline simulation because flatten model was requested.

Message parameters -

Reason -

Solution -

N01216

Message MATLAB diary already in use. Build messages from the existing diary will be
copied to file.

Message parameters -

Reason -

56
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

N01217

Message Logging via MATLAB diary is disabled. Build messages will not be logged to file.

Message parameters -

Reason -

Solution -

N01218

Message The build monitor is disabled.

Message parameters -

Reason -

Solution -

N01219

Message The Simulink Report Generator is required to generate web view.

Message parameters -

Reason -

57
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

N01220

Message Automatic block renaming was disabled by the user.

Message parameters -

Reason -

Solution -

N01221

Message Exported the build for the remote build server. Make sure the build server is
running and configured the following build directory: %1.

Message parameters § Build directory

Reason -

Solution -

N01222

Message Using a workaround for unplaced small shapes, LUTs, and flops
(XILINX_VIVADO_RLOC_WORKAROUND == 1).

Message parameters -

58
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

N01223

Message Using a workaround to avoid the SRL32 constraints bug.

Message parameters -

Reason -

Solution -

N01224

Message Using a workaround to avoid invalid multicycle path constraints.

Message parameters -

Reason -

Solution -

N01225

Message The Xilinx BRAM optimization workaround is active.

Message parameters -

59
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

N01226

Message The flatten model workaround is active in dSPACE only mode.

Message parameters -

Reason -

Solution -

N01227

Message Preparing Vivado interface mode for %1.

Message parameters § Job name

Reason -

Solution -

N01228

Message Found more than one FPGA Setup block. Continuing with the data of first block
found.

Message parameters -

60
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

N01229

Message Starting the repeated generation of the FPGA container file. Using the source
bitstream from the following container: %1.

Message parameters § FPGA container file path

Reason -

Solution -

N01230

Message Starting the repeated generation of the FPGA container file. Using the source
bitstream in the following Vivado directory: %1.

Message parameters § Vivado directory

Reason -

Solution -

N01231

Message Updated the SIC file for the following scaling subsystem : %1s successful.

61
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters § SIC path

Reason -

Solution -

N01232

Message Backing up the original FPGA container input file to: %1...

Message parameters § FPGA container backup path

Reason -

Solution -

N01233

Message Completed the repeated generation of the FPGA container file.

Updated the %1 file: %2.

Message parameters § File type

§ File path

Reason -

Solution -

62
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

N01234

Message Performing the 'flatten model design rules' check.

Message parameters -

Reason -

Solution -

N01235

Message The device is not supported.

Message parameters -

Reason -

Solution -

N01236

Message Scripted build completed.

Message parameters -

Reason -

Solution -

63
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

N01237

Message Framework update completed.

Message parameters -

Reason -

Solution -

N01238

Message Framework initialization completed.

Message parameters -

Reason -

Solution -

N01239

Message Model INI generation completed.

Message parameters -

Reason -

Solution -

64
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

N01240

Message Traceable signals: %1

Tunable constants: %2

Test access ports: %3

Message parameters § Signal names

§ Constant names
§ Access port names

Reason -

Solution -

N01241

Message Too many FPGA calibration constants and test access ports (max. 65535 Flip-
Flops). Reduce the selection.

Message parameters -

Reason -

Solution -

N01242

Message FPGA tracing had to be disabled for this build.

Message parameters -

Reason -

65
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

N01243

Message Migrating the SCALEXIO processor interface.

Message parameters -

Reason -

Solution -

N01244

Message Migrating the %1 block to the %2 block.

Message parameters § Block name

§ Block name

Reason -

Solution -

E02008

Message An error occurred during code generation. %1

Message parameters § More information

Reason -

66
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E02009

Message To avoid damage to hardware by a generated design, some blocks are

prohibited. Found the following prohibited block: %1.

Message parameters § Block path

Reason To avoid damage to hardware by a generated design, some blocks are

prohibited. These blocks are: Vitis Model Composer block and Xilinx gateway
blocks. At least one of these blocks was found in your design.

Solution -

E02010

Message The activated RTI platform is not supported for the generation of burn
applications. Reported by: Burn application generator.

Message parameters -

Reason -

Solution -

E02014

Message Could not remove an FPGA subsystem from the model. Restored the model.

Message parameters -

67
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution Check whether any FPGA subsystem contains another FPGA subsystem.

E02015

Message A temporary file was built during separation. This file is needed in deseparation,
but could not be found. Name of the missing file: %1

Message parameters § File name

Reason -

Solution -

E02016

Message A problem occurred in deseparation. The subsystem structure of the model was
probably modified after separation. All subsystems which could not be inserted
correctly have been put into the model's root. If you want to restore your original
model (from before separation), you can do so from the following file: %1.

The following subsystems have been inserted in the model's root: %2.

Message parameters § File name

§ Subsystem name

Reason -

Solution -

68
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02018

Message Could not find the user-defined target file you entered as a build option. Check
whether the file you entered exists.

Message parameters -

Reason -

Solution If you enter a file, keep in mind that backslashes are used for paths
and that the file name extension is left out. A path can look like this:
'e:\directory\targetfilename'.

E02019

Message Could not analyze the bus topology of some FPGA_XDATA_WRITE blocks.

Message parameters -

Reason -

Solution -

E02023

Message The license check has detected that you are using an invalid license of the Xilinx
Vitis Model Composer/Vivado.

Message parameters -

Reason -

69
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution If you have no license or an old license, make sure that a valid license is active.

E02024

Message The version check has detected that you are using a an incompatible version of
the Xilinx Vitis Model Composer. %1

Message parameters § More information

Reason -

Solution If you have different versions installed, make sure that a compatible one is active.
If this has not been done, do so by using the Xilinx 'xlVersion' command.

E02025

Message The version check has detected that you are using a an incompatible version of
the Xilinx Vivado.

Message parameters -

Reason -

Solution If you have different versions installed, make sure that a compatible one is active.
To solve this issue, edit the path settings in Windows.

E02028

Message The simulation time you entered is infinite. Enter a finite simulation time.

Message parameters -

70
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

E02029

Message An error occurred during the build of Xilinx Vitis Model Composer. The build
process was canceled. %1

Message parameters § More information

Reason -

Solution -

E02030

Message An error occurred during the build of Xilinx Vitis Model Composer. A simulation
is still running. %1

Message parameters § More information

Reason -

Solution -

E02031

Message An Error occurred within Build of Xilinx Vitis Model Composer. Check the
parameter error. %1

71
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters § More information

Reason -

Solution -

E02032

Message An Error occurred within Build of Xilinx Vitis Model Composer. Netlist
compilation/generation error. %1

Message parameters § More information

Reason -

Solution -

E02033

Message An Error occurred within Build of Xilinx Vitis Model Composer. A netlist error
occurred. %1

Message parameters § More information

Reason -

Solution -

72
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02034

Message A post-netlist script error occurred within Build of Xilinx Vitis Model Composer.
%1

Message parameters § More information

Reason -

Solution -

E02035

Message A post-netlist error occurred within Build of Xilinx Vitis Model Composer. %1

Message parameters § More information

Reason -

Solution -

E02036

Message A post-generation error occurred within Build of Xilinx Vitis Model Composer.
%1

Message parameters § More information

Reason -

Solution -

73
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E02037

Message An Error occurred within Build of Xilinx Vitis Model Composer. An external view
mismatch occurred while importing as a configurable subsystem. %1

Message parameters § More information

Reason -

Solution -

E02038

Message For the step you selected, the model has to be saved first. Save the model.

Message parameters -

Reason -

Solution -

E02039

Message Your model contains at least one duplicate block. This error can occur when
copying FPGA interface blocks.

Message parameters -

Reason -

Solution -

74
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02040

Message Write access to model denied. Affected model file:%1.

Message parameters § File name

Reason -

Solution -

E02041

Message Writing permissions in build directory denied.

Message parameters -

Reason -

Solution -

E02042

Message In the build process, the model's interface sometimes has to be adapted. This
step failed. Affected model file: %1

Message parameters § File name

Reason One reason for this failure may be an FPGA Interface Block whose parameters
have not been set. For more information, contact dSPACE Support.

Solution -

75
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E02043

Message The model you want to build is stored in the root directory of your partition. This
is not allowed for compatibility reasons. Save your model to another location for
the build process.

Message parameters -

Reason -

Solution -

E02044

Message Could not load the Xilinx Vitis Model Composer Library.

Message parameters -

Reason -

Solution Check your installation of the Xilinx Vitis Model Composer Library.

E02045

Message Could not find interface blocks.

Message parameters -

Reason The model might contain an interface block which does not belong to the
selected framework.

Solution -

76
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02046

Message The scripted build detected at least two FPGA setup blocks in a subsystem to be
built.

Message parameters -

Reason This error can occur when an FPGA subsystem contains another FPGA
subsystem. This is not supported. If this is the case, adapt your design.

Solution -

E02047

Message The last character of a model's name must be one of the following: a-z, A-Z, or
0-9.

Message parameters -

Reason -

Solution -

E02048

Message Could not find the framework selected in your FPGA Setup block.

Message parameters -

Reason -

Solution Check your installation of the Xilinx Vitis Model Composer Library.

77
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E02049

Message In the build process, the results of XSG build are copied. This failed. Check your
write permissions.

Message parameters -

Reason -

Solution Check your write permissions.

E02050

Message The file structure is corrupted. The following file is missing: %1.

Message parameters § File name

Reason -

Solution -

E02051

Message In the build process, the model needs to be updated. This step failed with
following error message: %1

Message parameters § Error messages

Reason -

Solution -

78
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02052

Message A problem occurred while updating framework settings. Could not update the
following blocks: %1.

Message parameters § Block name

Reason -

Solution -

E02053

Message Could not find at least one of the following Vivado result files: %1.

Message parameters § File name

Reason -

Solution -

E02055

Message The name of FPGA subsystems must not contain the characters "/" or "\".
Correct this and restart the FPGA build.

Message parameters -

Reason -

Solution -

79
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

W02056

Message You are using a fixed-step solver. Xilinx Vitis Model Composer does not support
this. This can cause the FPGA build to terminate.

Message parameters -

Reason -

Solution -

E02058

Message An internal timeout error occurred in the FPGA build.

Message parameters -

Reason -

Solution Restart MATLAB. If this error persists, contact dSPACE Support.

E02059

Message The target file used by the selected FPGA framework does not support the active
Xilinx Vivado or XSG version. The incompatible FPGA framework was selected in
following FPGA Setup block: %1

Message parameters § Setup block

Reason -

Solution -

80
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02061

Message Update Framework has to rebuild the base layer of all RTIFPGA blocks. This step
failed.

Message parameters -

Reason -

Solution -

E02063

Message An error occurred during the build of the Xilinx Vitis Model Composer. Clock
wrapper output is missing or corrupt: %1.

Message parameters § Hand-coded framework clock wrapper file name

Reason -

Solution -

E02064

Message Could not build an empty FPGA subsystem. Affected model file: %1

Message parameters § File name

Reason -

Solution -

81
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E02065

Message Errors occurred during offline Simulation of Model. FPGA build aborted. Affected
model file: %1

Message parameters § File name

Reason -

Solution -

E02070

Message The HDL simulation of the Xilinx System Generator HDL output failed. %1

Message parameters § Output file

Reason -

Solution -

E02074

Message One or more FPGA interface blocks are located in subsystems with clocks
different from the FPGA base clock period.

Message parameters -

Reason -

Solution -

82
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E02075

Message Could not implement the results of the Xilinx Vitis Model Composer build. The
design did not meet the timing requirements. Log file: %1.

Message parameters § Log file name

Reason -

Solution Perform a timing analysis and add more pipeline stages to timing-critical paths.

E02077

Message Could not synthesize the Xilinx Vitis Model Composer code due to multi-driven
nets. Log file: %1.

Message parameters § Log file name

Reason -

Solution Analyze the messages in the log file. If the problem persists, contact dSPACE
Support.

E02078

Message Could not perform FPGA tracing. %1

Message parameters § Detailed messages

Reason -

Solution -

83
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E02080

Message Could not perform bitstream generation because of unrouted DSP nets.

Message parameters -

Reason This error might be caused by a known problem with Vivado in versions 2017.2,
2017.4, and 2018.2.

Solution Set the GLOBAL variable RTIFPGA_XILINX_VIVADO_2017_DSP_WORKAROUND =

1 to enable an automatic workaround and repeat the build:

>> global RTIFPGA_XILINX_VIVADO_2017_DSP_WORKAROUND;

>> RTIFPGA_XILINX_VIVADO_2017_DSP_WORKAROUND = 1;

E02082

Message The path of a file XILINX Vivado is trying to access exceeds the operating system
limits.

Message parameters -

Reason -

Solution Please use a shorter path for the build directory.

E02083

Message Could not generate the compressed bitstream. Possible reasons: I/O error, OS
error, or Windows error.

Message parameters -

84
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

W02086

Message Constraint warning that has been downgraded to information. %1

Message parameters § Log file name

Reason -

Solution -

E02090

Message FPGA tracing of buses with duplicate input signals will impact the model
behavior itself. Fix the problem or disable FPGA tracing of buses. %1

Message parameters § Log file name

Reason -

Solution -

E02091

Message Could not parse framework INI file.

Message parameters -

85
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

E02092

Message Framework INI file: %1 is missing.

Message parameters § Framework INI file path

Reason -

Solution -

E02093

Message The referenced framework INI file directory is invalid or no longer exists. %1

Message parameters § Error details

Reason -

Solution -

E02095

Message No timing analysis report available.

Message parameters -

86
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

E02096

Message Could not generate the timing report.

Message parameters -

Reason -

Solution -

E02098

Message Could not generate the resource utilization report.

Message parameters -

Reason -

Solution -

E02099

Message No resource utilization report available.

Message parameters -

87
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

E02100

Message Could not open the Word Length Calculator dialog.

Message parameters -

Reason -

Solution Check the installation of the dSPACE FPGA Programming Blockset and the
corresponding path settings in MATLAB.

E02101

Message Could not open the Advanced Preferences dialog.

Message parameters -

Reason -

Solution Check the installation of the dSPACE FPGA Programming Blockset and the
corresponding path settings in MATLAB.

E02102

Message Could not unhide contents of dSPACE block masks.

88
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Message parameters -

Reason -

Solution -

E02103

Message Could not hide contents of dSPACE block masks.

Message parameters -

Reason -

Solution -

E03001

Message Could not implement the FPGA design due to undriven inputs.

Message parameters -

Reason This is likely due to a failure in Xilinx System Generator (XSG) code generation.

Solution Restart MATLAB and try again.

E03002

Message An unknown problem associated with the custom module occurred during the
FPGA build.

89
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters -

Reason -

Solution Contact dSPACE Support.

E03100

Message Invalid settings:

Found a forbidden direction change within the same cable segment.

Segment: %1

conflicts with %2.

List of the 6 cable cable segments of a module slot:

segment 1: bits 0-5,

segment 2: bits 6-7,

segment 3: bits 8-13,

segment 4: bits 14-19,

segment 5: bits 20-21,

segment 6: bits 22-27

Message parameters § Segment number

§ Block name

Reason -

Solution -

E03101

Message Invalid settings:

Found more than one direction change on the same cable.

90
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Place I-FPGA In and I-FPGA Out buses on the same cable so that there is only
one direction change. Changes in direction are not allowed within the same
segment.

List of the 6 cable cable segments of a module slot:

segment 1: bits 0-5,

segment 2: bits 6-7,

segment 3: bits 8-13,

segment 4: bits 14-19,

segment 5: bits 20-21,

segment 6: bits 22-27.

Message parameters -

Reason -

Solution -

E03102

Message Invalid settings:

start bit: %1; end bit: %2.

conflicts with %3 configured with:

function: %4

start bit: %5; end bit: %6

Message parameters § start bit

§ end bit
§ block name
§ function name
§ start bit
§ end bit

Reason -

Solution -

91
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03103

Message Could not find a processor setup block in the following model: %1.

Message parameters § Model name

Reason -

Solution -

E03104

Message No FPGA container or FPGA subsystem is assigned to board number: %1.

Message parameters § Model name

Reason -

Solution -

E03106

Message This channel does not exist for the specified access type.

Message parameters -

Reason -

Solution -

92
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03107

Message The FPGA model has not been built yet.

Message parameters -

Reason -

Solution -

E03108

Message The processor setup block or FPGA setup block with corresponding board
number is not available.

Message parameters -

Reason -

Solution -

E03109

Message The specified board number %1 exceeds the number of available boards. The
number of available boards is set in the processor setup block.

Message parameters § Board number

Reason -

Solution -

93
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03110

Message The processor setup block might be corrupted. Reconfigure the processor setup
block.

Message parameters -

Reason -

Solution -

E03111

Message No FPGA application is assigned to board %1 in the processor setup block.

Message parameters § Board number

Reason -

Solution -

E03112

Message The FPGA subsystem assigned to board %1 was lost. Reassign the FPGA
subsystem in the Processor setup block.

Message parameters § Board number

Reason -

Solution -

94
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03113

Message The FPGA model is corrupted.

Message parameters -

Reason -

Solution -

E03114

Message The interface type %1 with access type %2 does not exist in the FPGA
application.

Message parameters § Interface type

§ Access type

Reason -

Solution -

E03115

Message The assigned channel number does not exist.

Message parameters -

Reason -

Solution -

95
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03116

Message The FPGA model is corrupted.

Message parameters -

Reason -

Solution -

E03117

Message The following FPGA container is corrupted: %1.

Message parameters § FPGA container name

Reason -

Solution -

E03118

Message Could not open the RTI help desk. %1

Message parameters § Error details

Reason -

Solution -

96
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03119

Message The following FPGA container does not exist: %1.

Message parameters § FPGA container path

Reason -

Solution -

E03120

Message The following PGA container is corrupted: %1.

Message parameters § FPGA container name

Reason -

Solution -

E03121

Message The processor blocks are located in an FPGA subsystem. This is not supported.

Message parameters -

Reason -

Solution -

97
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03122

Message The invalid value does not match the matrix index. It should have the following
dimension: %1.

Message parameters § Dimension

Reason -

Solution -

E03123

Message Java has to be enabled in the MATLAB environment.

Message parameters -

Reason -

Solution -

E03124

Message An error occurred while writing to the current working directory.

Message parameters -

Reason -

Solution -

98
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03125

Message Could not find the following FPGA container: %1.

Message parameters § FPGA container path

Reason -

Solution -

E03126

Message The following error occurs while checking the FPGA containers: %1

Message parameters § Error details

Reason -

Solution -

E03127

Message The following FPGA container is compatible only with %2: %1. Active platform:
RTI%3.

Message parameters § FPGA container path

§ Compatible RTI types
§ RTI type number

Reason -

Solution -

99
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03128

Message The following subsystems contain multiple FPGA setup blocks: %1.

Message parameters § Subsystems

Reason -

Solution -

E03129

Message Select the following model mode: %1.

Message parameters § Model mode

Reason -

Solution -

E03130

Message The following FPGA model subsystems have been assigned to multiple boards:
%1

Message parameters § Board names

Reason -

Solution -

100
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03131

Message The following subsystem is currently assigned to an FPGA board and has not
been built: %1. The subsystem has to be built before the model is separated.

Message parameters § Subsystem name

Reason -

Solution -

E03132

Message The FPGA build of at least one FPGA subsystem failed.

Message parameters -

Reason -

Solution -

E03133

Message Multiple %1 blocks in the FPGA model access %2 channel %3.

Message parameters § Block type

§ Block access type
§ Channel number

Reason -

Solution -

101
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03134

Message You have to save the following model before it can be adapted: %1.

Message parameters § Model name

Reason -

Solution -

E03135

Message Could not establish a ConfigurationDesk connection. Check your

ConfigurationDesk installation.

Message parameters -

Reason -

Solution -

E03136

Message The ConfigurationDesk project name is invalid. Project name: %1.

Message parameters § Project name

Reason -

Solution -

102
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03137

Message The ConfigurationDesk project path is invalid. Project path: %1.

Message parameters § Project path

Reason -

Solution -

E03138

Message Could not create the ConfigurationDesk project. Project: %1

Message parameters § Project name

Reason -

Solution -

E03139

Message Could not create the following ConfigurationDesk application: %1. Activate the
application you want to use in the existing project.

Message parameters § Application name

Reason -

Solution -

103
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03140

Message Could not create the custom function instance. The custom function type is
invalid. Custom function: %1.

Message parameters § Custom function

Reason -

Solution -

E03141

Message No active ConfigurationDesk application.

Message parameters -

Reason -

Solution -

E03142

Message Could not analyze the separated model. Probable cause: incorrect MATLAB
version or incorrect fixed step size. Make sure the MATLAB version is used
configured as preferred in the dSPACE Installation Manager. Specify a correct
fixed step size in the complete original model. CN model which could not be
analyzed: %1.

Message parameters § CN model name

Reason -

104
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E03143

Message Could not assign the setup block to the custom function instance. The custom
function instance is not available. Custom function: %1.

Message parameters § Custom function

Reason -

Solution -

E03144

Message Could not separate the model. See MATLAB log for details.

Message parameters -

Reason -

Solution -

E03145

Message Could not find a Model Separation Setup block. Add a Model Separation Setup
Block and specify which subsystems to separate into processor models during
export to ConfigurationDesk.

Message parameters -

105
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

E03146

Message Could not publish the FPGA custom function to ConfigurationDesk. The
directory does not exist.

Message parameters -

Reason -

Solution -

E03147

Message At least two FPGA containers have the same file name.

Message parameters -

Reason -

Solution -

E03148

Message Framework %1 is corrupted.

Message parameters § Framework INI file

106
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

E03149

Message Framework %1 or %2 does not exist.

Message parameters § Framework INI file local path

§ Other possible framework INI file path

Reason -

Solution -

E03150

Message At least two frameworks have the same framework name. Check the
initialization files.

Message parameters -

Reason -

Solution -

E03151

Message The data structure of the FPGA Setup block is corrupted. Add an optional
framework INI file.

107
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters -

Reason -

Solution -

E03152

Message Found an incorrect channel assigment.

Message parameters -

Reason -

Solution -

E03153

Message The channel number must not be empty.

Message parameters -

Reason -

Solution -

E03154

Message An incorrect access mode is assigned to the selected channel.

108
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Message parameters -

Reason -

Solution -

E03155

Message The DDR4 Physical Mode block must be placed in a subsystem. It must not be
located on the FPGA model root. However, the following block is located on the
FPGA model root: %1.

Message parameters § DDR4 Phsyical Mode block name

Reason -

Solution -

E03156

Message All custom user clock blocks must be placed in subsystems. They must not be
located on the FPGA model root. However, the following block is located on the
FPGA model root: %1.

Message parameters § Custom user clock block

Reason -

Solution -

109
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03158

Message In order to use DDR4 physical mode, a base subsystem must be specifiedon
the Subsystem Clocks page of the Setup block. Make sure that at least one
subsystem with clock period %1 is specified under Subsystem Clocks.

Message parameters § Clock period

Reason -

Solution -

E03159

Message In order to use clock gateway blocks, a base subsystem must be specified in
Setup block's tab "Subsystem Clocks". Please make sure that there is at least
one subsystem with clock period %1 specified under "Subsystem Clocks".

Message parameters § Clock period

Reason -

Solution -

E03160

Message Found more than one FPGA Setup block.

Message parameters -

Reason -

110
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E03161

Message There is no FPGA setup block.

Message parameters -

Reason -

Solution -

E03162

Message Found inconsistencies in the framework INI file.

Function: %1.

Current block settings:

framework: %2; %3

FPGA Setup block settings:

framework: %4; %5

Message parameters § Block name

§ Framework name
§ I/O module details
§ Framework from FPGA Setup block
§ I/O module details from FPGA Setup block

Reason -

Solution -

111
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03163

Message Found at least one FPGA Setup block on the same or subordinate model level.

Message parameters -

Reason -

Solution -

E03164

Message An error occurred while parsing %1.

Message parameters § Block type

Reason -

Solution -

E03165

Message The interface block in the current FPGA model is corrupted.

Message parameters -

Reason -

Solution -

112
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03166

Message Could not find the %1 variable in block masks or the base workspace which is
specified as the block parameter value.

Message parameters § Variable name

Reason -

Solution -

E03167

Message Could not determine the generic buffer ID of FPGA scope %1.

Message parameters § Scope block

Reason -

Solution -

E03168

Message The selected FPGA framework %1 does not support the FPGA Scope feature.

Message parameters § Framework name

Reason -

Solution Remove the FPGA Scope block from your model.

113
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03169

Message There are too many FPGA Scope blocks in the following FPGA subsystem: %1.
Maximum number of allowed blocks in each FPGA subsystem: 16. Number of
blocks in this subsystem: %2. Remove %3 "FPGA Scope" block(s).

Message parameters § FPGA subsystem name

§ Number of FPGA Scope blocks
§ Number of FPGA Scope blocks to remove

Reason -

Solution -

E03170

Message Could not complete the FPGA build action due to framework inconsistency.

Message parameters -

Reason -

Solution -

E03171

Message Could not find a help file.

Message parameters -

Reason -

114
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E03172

Message No help file is defined for this communication channel.

Message parameters -

Reason -

Solution -

E03173

Message No communication function available.

Message parameters -

Reason -

Solution -

E03174

Message No framework has been assigned.

Message parameters -

Reason -

115
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

E03175

Message No channel of this type is free.

Message parameters -

Reason -

Solution -

E03176

Message Invalid settings:

%1 - Tracing Page.

FPGA tracing and calibration is supported only in subsystems with an FPGA base
clock period.

Message parameters § Name of the block

Reason -

Solution Check your subsystem clocks.

E03177

Message Runnable functions must not be placed in scaling subsystems.

Check: %1

116
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Message parameters § Conflicting subsystem

Reason -

Solution Check your subsystem clocks.

E03178

Message The processor subsystem is used in the FPGA subsystem but its Direction property
is not set to 0 oder 1 (postprocessing).

Check: %1

Message parameters § Conflicting subsystem

Reason -

Solution Check your subsystem clocks.

E03179

Message The Scaling subsystem communicates with FPGA XDATA blocks from different
FPGA functions or FPGA functions and non-FPGA function subsystems.

Check: %1

Message parameters § Conflicting subsystem

Reason -

Solution Check your subsystem clocks.

117
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03180

Message Could not import a custom function to ConfigurationDesk project. Custom

Function: %1

Message parameters § Custom function

Reason -

Solution -

E03181

Message Could not find a port block for port %1.

Message parameters § Port name

Reason -

Solution -

E03182

Message The FPGA build cannot start without the %1 parameter.

Message parameters § Parameter name

Reason -

Solution -

118
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03183

Message The parameter mode for AddParametrizedSysgen block is not supported.

Supported: Build, TA, HDLA.

Message parameters -

Reason -

Solution -

E03184

Message In the Separation Manager, invalid mode is selected.

The only permitted modes are: 'separation' and 'deseparation.'

Message parameters -

Reason -

Solution -

E03185

Message The FPGA build failed.

The following message occurred during the build: %1.

Message parameters § Message ID

Reason -

119
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution Find the Message ID in dSPACE Help for more details.

E03186

Message Recursion depth of %1 exceeded when finding source port of %2.

Message parameters § Recursion depth

§ Block name

Reason -

Solution -

E03187

Message Recursion depth of %1 exceeded when finding source port of %2.

Message parameters § Recursion depth

§ Block name

Reason -

Solution -

E03188

Message Recursion depth of %1 exceeded when finding destination port of %2.

Message parameters § Recursion depth

§ Block name

120
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

E03189

Message Unsupported data type %1 for gateway %2.

Message parameters § Data type

§ Gateway name

Reason -

Solution -

E03190

Message Unknown gateway direction %1. Expected: 'toHDLCoder' or 'fromHDLCoder'.

Message parameters § Gateway direction

Reason -

Solution -

E03191

Message An error occurred while initializing the block display (%1).

Message parameters § Block name

121
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution -

E03192

Message An RTIFPGA error occurred in %1. Could not highlight the FPGA Setup block.
The model does not contain a FPGA Setup block.

Message parameters § Execute script name

Reason -

Solution -

E03193

Message No custom function has been instantiated in the project.

Message parameters -

Reason -

Solution -

E03194

Message The Import of configuration parameters was canceled at custom function

instance selection.

122
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Message parameters -

Reason -

Solution -

E03195

Message FPGA function subsystems are not allowed in other FPGA function subsystems.

Remove the %1 tag from the properties of %2 in the following FPGA function
subsystem: %3.

Message parameters § Subsystem tag

§ Subsystem inside
§ Subsystem outside

Reason -

Solution -

E03196

Message RTI_BLOCKFIND: There are too few input parameters. At least handle, property,
and value are required.

Message parameters -

Reason -

Solution -

123
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03197

Message RTI_BLOCKFIND: There are too many input parameters or unrecognized

parameter.

Message parameters -

Reason -

Solution -

E03198

Message RTI_BLOCKFIND: There are not enough parameters or unrecognized parameters.

Message parameters -

Reason -

Solution -

E03199

Message RTI_BLOCKFIND: There is no valid handle.

Message parameters -

Reason -

Solution -

124
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03200

Message RTI_BLOCKFIND: The property or value is empty.

Message parameters -

Reason -

Solution -

E03201

Message RTI_BLOCKFIND: At least one property is not of type char.

Message parameters -

Reason -

Solution -

E03202

Message RTI_BLOCKFIND: Value %1 is not of type char or cell.

Message parameters § Value index

Reason -

Solution -

125
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03203

Message RTI_BLOCKFIND: Value %1 hasan invalid size (length must be 2).

Message parameters § Value index

Reason -

Solution -

E03204

Message Value %1 has no valid entry.

Message parameters § Value index

Reason -

Solution -

E03205

Message RTI_BLOCKFIND: Value %1 is not of valid type 'model' or 'system'.

Message parameters § Value index

Reason -

Solution -

126
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03206

Message RTI_BLOCKFIND: The ReturnMode property must be specified.

Message parameters -

Reason -

Solution -

E03207

Message RTI_BLOCKFIND: The %1 property is not valid (must be %2).

Message parameters § Property index

§ Valid property

Reason -

Solution -

E03208

Message RTI_BLOCKFIND: Value %1 does not have a valid type ('numeric', 'cellString', or
'asInput').

Message parameters § Value index

Reason -

Solution -

127
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03209

Message RTI_BLOCKFIND: There is no valid first property.

Message parameters -

Reason -

Solution -

E03210

Message Could not generate the web view.

Message parameters -

Reason -

Solution -

E03211

Message Could not generate a timing report.

Message parameters -

Reason -

Solution -

128
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03212

Message Could not generate the resource report.

Message parameters -

Reason -

Solution -

E03213

Message A backup was requested but no backup directory was provided.

Message parameters -

Reason -

Solution -

E03214

Message Could not display the utilization report.

Message parameters -

Reason -

Solution -

129
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03215

Message An error occurred in build stage %1.

Message parameters § Build stage

Reason -

Solution -

E03216

Message Execution mode of %1 must be 'start' or 'sync'. Received '%2' instead.

Message parameters § Job name

§ Execution mode

Reason -

Solution -

E03217

Message An error occurred during HDL coder code generation: %1; %2

Message parameters § Exception identifier

§ Exception details

Reason -

Solution -

130
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03218

Message A file I/O error occurred while writing custom I/O function driver code %1. %2

Message parameters § File type

§ Details

Reason -

Solution -

E03219

Message An error occurred: %1

Message parameters § Error details

Reason -

Solution -

E03220

Message Timing report generation failed : The FPGA subsystem name contains characters
that are not contained in the file system encoding.

Message parameters -

Reason -

Solution -

131
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03221

Message Could not access the following specified FPGA subsystem: %1. Open the
corresponding model. Also make sure that the FPGA subsystem exists.

Message parameters § FPGA subsystem path

Reason -

Solution -

E03222

Message The following specified Vivado input directory (with .bin / .ll file) does not exist:
%1.

Message parameters § FPGA container path

Reason -

Solution -

E03223

Message Could not copy the following file when generating the custom function: %1.
%2

Message parameters § File name

§ Error details

Reason -

132
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E03224

Message Due to interface changes, you have to rebuild the complete FPGA.

Message parameters -

Reason -

Solution -

E03225

Message The following scaling subsystem is new: %1. Due to interface changes, you have
to rebuild the complete FPGA.

Message parameters § Subsystem path

Reason -

Solution -

E03226

Message The specified third-party board bitstream input file does not exist: %1.

Message parameters § Bitstream input file path

Reason -

133
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Solution -

E03227

Message The specified third-party board board_id is invalid: %1.

Message parameters § Board ID

Reason -

Solution -

E03228

Message Could not find the templates for the third-party board.

Message parameters -

Reason -

Solution -

E03229

Message The following custom function file does not exist: %1.

Message parameters § Custom function file name

Reason -

134
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E03230

Message An error occurred in the rtifpga.third_party_board.add_third_party_bitstream

function: %1.

Message parameters § Error details

Reason -

Solution -

E03231

Message The .bin file does not exist in the specified source directory: %1. Run bitstream
generation with bin file generation.

Message parameters § Bitstream directory

Reason -

Solution -

E03232

Message Tracing-related features are enabled in the original bitstream. However, no .ll file
was found in the specified source directory: %1.

Continuing without tracing.

Message parameters § Bitstream directory

135
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason -

Solution To fix this, run bitstream generation with logic location file generation.

E03233

Message Could not perform the design rule check. Read the error messages above.

Message parameters -

Reason -

Solution -

E03234

Message Could not remove all variant subsystems. Code generation might fail.

Message parameters -

Reason -

Solution -

E03235

Message Could not set LinkStatus of block %1 to 'none'.

Message parameters § Full block name

136
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Reason -

Solution -

E03236

Message Could not set MaskHideContents of block %1 to 'off'.

Message parameters § Full block name

Reason -

Solution -

E03237

Message An error occurred while processing the following block: %1. Could not set
parameter %2 to %3.

Message parameters § Block full name

§ Parameter to set
§ Value to set

Reason -

Solution -

E03238

Message The set_param(%1, %2, %3) API command did not work. Retrying...

137
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters § Block full name

§ Parameter to set
§ Value to set

Reason -

Solution -

E03239

Message Input signals of bus creator %1 must have unique names, but the following
signal name is used more than once: %2.

Message parameters § Bus creator full name

§ Signal name

Reason -

Solution -

E03240

Message The %1 output signal of the following bus selector was renamed by Simulink:
%2.

This might cause issues with signal name propagation. Change or remove the
signal name.

Message parameters § Output signal name

§ Bus selector full name

Reason -

Solution -

138
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03241

Message Commented out blocks are not allowed in FPGA subsystem: %1.

Message parameters § Block fullname

Reason -

Solution -

E03242

Message Input #%1 of the following block is a bus signal: %2. Flatten Model does not
allow bus signals as inputs to XSG blocks.

Message parameters § Input signal number

§ Block full name

Reason -

Solution -

E03243

Message Flatten Model does not support Selector blocks: %1.

Message parameters § Full Selector block name

Reason -

Solution -

139
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03244

Message Unknown FPGA device.

Message parameters -

Reason -

Solution -

E03245

Message Invalid folder name: %1.

Message parameters § Folder name

Reason -

Solution -

E03246

Message rtifpga_pycall: An error occurred while exporting the following function: %1.

Message parameters § Function name

Reason -

Solution -

140
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

E03247

Message An error occurred while executing the following Python function: %1. Python
backtrace: %2

Message parameters § Function name

§ Executed Python command

Reason -

Solution -

E03248

Message An error occurred while converting a Python result back to MATLAB.

Python file: %1

Called function: %2

Arguments:%3

Result %4: %5

Message parameters § Python file

§ Function name
§ Arguments
§ Result index
§ Result

Reason -

Solution -

E03250

Message The channel is not available or already used. Select a different channel.

141
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters -

Reason -

Solution -

E03251

Message The channel is already being used. Select a different channel.

Message parameters -

Reason -

Solution -

E03252

Message The list does not contain such an FPGA container file.

Message parameters -

Reason -

Solution -

E03253

Message Could not find the block type in the model.

142
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Message parameters -

Reason -

Solution -

E03254

Message No valid FPGA Setup Block handle.

Message parameters -

Reason -

Solution -

E03255

Message No FPGA XDATA WRITE block with bus mode enabled.

Message parameters -

Reason -

Solution -

E03256

Message No FPGA XDATA READ block with bus mode enabled.

143
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Message parameters -

Reason -

Solution -

E03257

Message No valid copy block.

Message parameters -

Reason -

Solution -

E03258

Message Incorrect signal format.

Message parameters -

Reason -

Solution -

E03259

Message Runnable function blocks are not allowed in scaling subsystems.

144
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Remove the %1 runnable function block from the following scaling subsystem:
%2.

Message parameters § Runnable function block

§ Scaling subsystem

Reason -

Solution -

E03260

Message Scaling subsystems are not allowed in other scaling subsystems.

Remove the '%1' tag from the properties of %2 inside of the following FPGA
function: %3.

Message parameters § Tag name

§ SIC subsystem
§ FPGA function

Reason -

Solution -

E03261

Message Could not find the following FPGA subsystem: %1.

Message parameters § FPGA subsystem

Reason -

Solution -

145
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

E03262

Message Could not find an FPGA Setup block in the following subsystem: %1.

Message parameters § FPGA subsystem

Reason -

Solution -

E03263

Message All Register/Register64 of the same direction and group in one FPGA function
have to belong to only one scaling subsystem.

Make sure that all FPGA_XDATA Register/Register64 %1 blocks with group ID

%2 in %3 belong to the following scaling subsystem %4.

Message parameters § Direction type

§ Group ID
§ Subsystem
§ SIC subsystem

Reason -

Solution -

E03264

Message Could not generate the scaling subsystem. %1

Message parameters § Error details

Reason -

146
FPGA Programming Software Message Reference May 2024
 Messages for FPGA Programming Software

Solution -

E03265

Message An error occurred while processing %2: %1.

Message parameters § Error details

§ Block name

Reason -

Solution -

E03266

Message An error occurred while processing %2: %1.

Message parameters § Error details

§ Block name

Reason -

Solution -

N03267

Message I/O Channel %1 is Changed to %2.

Message parameters § Channel name of original block

§ Channel name of copied block

147
May 2024 FPGA Programming Software Message Reference
 FPGA Programming Software Message Reference

Reason This message informs you that the I/O channel is changed during Copy & Paste
of the FPGA block.

Solution -

E03268

Message The application has run out of memory.

HINT: "Please add more RAM to the machine and/or reduce thread(s) to 1 in
FPGA_SETUP block."

Message parameters -

Reason -

Solution -

E03269

Message The replacement of the scaling subsystem failed.

Message parameters -

Reason -

Solution -

148
FPGA Programming Software Message Reference May 2024