MILITARY QUALITY

D-Sub FIXED AND REMOVABLE CONTACTS

HIGH DENSITY D-SUBMINIATURE Positronic
connectpositronic.com

ORDERING INFORMATION - CODE NUMBERING SYSTEM

Specify Complete Connector By Selecting An Option From Step 1 Through 8

STEP 1 2 3 4 5 6 7 8 9 10

EXAMPLE DD 62 S 4 R7 N T6 S /AA -50

STEP 1 - Basic series STEP 10 - SPECIAL OPTIONS
DD series
-14 - 0.000030 [0.76µ] gold over n­ ickel.
-15 - 0 .000050 [1.27µ] gold over n
­ ickel.
STEP 2 - Connector
 Variants -50 - 0.000050 [1.27µ] gold over ­copper.
15, 26, 44, 62, 78, 104 CONTACT TECHNICAL SALES
FOR ORDERING DETAILS OF
THE ­FOLLOWING:
STEP 3 - Connector Gender Other Special Requirements.
M - Male Straight and Right Angle (90°)
Thermocouple printed circuit board
S - Female - PosiBand closed entry contacts mount contacts
STEP 4 - Contact Termination Type
0 - Contacts ordered separately, see pages 55-57. STEP 9 - E
 nvironmental
1 - Crimp, 22 AWG-30 AWG [0.3mm2-0.05mm2]. Compliance options
2 - Removable, Solder cup, 22 AWG-30 AWG [0.3mm2- /AA -  RoHS Compliant
0.05mm2].
3 - Solder, Straight Printed Board Mount with 0.150 Note: If compliance to environmental
[3.81] Tail Length. ­legislation is not required, this step will
32 - Solder, Straight Printed Board Mount with 0.300 [7.62] not be used. Example: DD62S4R7NT6S
Tail Length.
33 - Solder, Straight Printed Board Mount with 0.500
[12.70] Tail Length. STEP 8 -SHELL OPTIONS
4 - Solder, Right Angle (90°) Printed Board Mount with 0 - Zinc plated with chromate seal.
0.450 [11.43] Contact Extension. *4 S - Stainless steel, passivated.
X - Tin plated.
*1 STEP 5 - Mounting STYLE Z - Tin plated and dimpled (male connectors only).
C - Cadmium with chromate seal.
0 - Mounting Hole, 0.120 [3.05] Ø.
02 - Mounting Hole, 0.154 [3.91] Ø.
B3 - Bracket, Mounting, Right Angle (90°) Metal with Cross Bar. *1 STEP 7 -Locking and Polarizing Systems
B8 - Bracket, Mounting, Right Angle (90°) Plastic with Cross Bar.
0 - None.
F - Float Mounts, Universal.
*3 V3 - Lock Tab, connector front panel mounted.
P - Threaded Post, Brass, 0.375 [9.53] Length.
*3 V5 - Lock Tab, connector rear panel mounted.
P2 - Threaded Post, Nylon, 0.375 [9.53] Length.
*3 VL - Lock Lever, used with Hoods only.
R2 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
T - Fixed Female Jackscrews.
Connector with 4-40 Thread Fixed Female Jackscrews with
T2 - Fixed Female Jackscrews.
Cross Bar.
T6 - Fixed Male and Female Polarized Jackscrews.
R6 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
E - Rotating Male Jackscrews.
Connector with 0.120 [3.05] Ø Mounting Hole with Cross Bar.
E2 - Rotating Male Screw Locks.
R7 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
E3 - Rotating Male with internal hex for 3/32 hex drives
Connector with 4-40 Threads with Cross Bar.
E6 - Rotating Male and Female Polarized Jackscrews.
R8 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Locknut with Cross Bar.
S - Swaged Spacer, 4-40 Threads, 0.375 [9.53] Length. *1 STEP 6 - Hoods AND PUSH-ON FASTENERS
S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.
S5 - Swaged Locknut, 4-40 Threads. 0 - None.
J - Hood, Top Opening, Plastic.
S6 - Swaged Spacer with Push-on Fasteners, 4-40 Threads, 0.375
L - Hood, Side Opening, Plastic.
[9.53] Length.
Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Available in size 78 and 104 only.
Inductor, 4-40 Threads, 0.515 [13.08] Length. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 78 and 104 only.
*1 F or additional information on accessories listed in steps 5, 6 and 7, see Z - Hood, Top or Side Opening, Robust and Extended Height,
Accessory Catalog. Composite and Plastic with Rotating Male Jackscrews. Available in
*2 Ferrite inductor is available on contact types 32 and 33 only. For more size 15, 26, 44, 62, and 78 only.
­information on ferrite inductors, see page 7. H - Hood, Top Opening, Metal. Available in size 26, 44, 62, and 78 only.
DD SERIES

*3 VL, V3 and V5 locking systems are not available for connector variants
G - Hood, EMI/RFI, Die Cast Zinc.
62, 78 and 104. Jackscrews are highly recommended to minimize
­damage to contacts on variants with high mating forces.
AN - Lightweight Aluminum Hood, nickel finish.
* For stainless steel dimpled male versions contact Technical Sales.
4 AC - Lightweight Aluminum Hood, no finish.
W - Hood, Top or Side Opening, Plastic. Available in size 15, 26, and 44 only.
N - Push-on Fastener, for Right Angle (90°) Mounting Brackets.
*2 F - Ferrite Inductor
For information regarding CRIMP TOOLS &
CRIMPING TOOL TECHNIQUES, see page 78 .
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE. 60