Inductive sensor
NJ2,5-14GM-N-V1-Y21146
< Usable up to SIL 2 acc. to IEC 61508
< 2.5 mm flush
< NAMUR output
Dimensions
M14x1
31
40
6
M12x1
Technical Data
General specifications
Switching function Normally closed (NC)
Output type NAMUR
Rated operating distance sn 2.5 mm
Installation flush
Assured operating distance sa 0 ... 2.02 mm
Release date: 2024-10-09 Date of issue: 2024-10-09 Filename: 70133054_eng.pdf
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.85
Output type 2-wire
Nominal ratings
Nominal voltage Uo 8.2 V (Ri approx. 1 kΩ)
Switching frequency f 0 ... 1500 Hz
Current consumption
Measuring plate not detected min. 3 mA
Measuring plate detected ≤ 1 mA
Functional safety related parameters
Safety Integrity Level (SIL) SIL 2
MTTFd 5887 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0%
Compliance with standards and directives
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com
[email protected] [email protected] [email protected] 1
Inductive sensor NJ2,5-14GM-N-V1-Y21146
Technical Data
Standard conformity
NAMUR EN 60947-5-6:2000
IEC 60947-5-6:1999
Standards EN IEC 60947-5-2
Approvals and certificates
IECEx approval
Equipment protection level Gb IECEx PTB 11.0037X
Equipment protection level Da IECEx PTB 11.0037X
Equipment protection level Mb IECEx PTB 11.0037X
ATEX approval
Equipment protection level Gb PTB 00 ATEX 2048 X
Equipment protection level Da PTB 00 ATEX 2048 X
UL approval cULus Listed, General Purpose
CCC approval
Hazardous Location 2020322315002258
CML approval on request
ANZEx 18.3018X
Ambient conditions
Ambient temperature 0 ... 90 °C (32 ... 194 °F)
Mechanical specifications
Connection type Connector plug
Housing material Stainless steel 1.4305 / AISI 303
Sensing face PBT
Degree of protection IP67
Connector
Threading M12 x 1
Number of pins 4
Dimensions
Length 40 mm
Diameter 14 mm
General information
Use in the hazardous area see instruction manuals
Connection
1
L+
Release date: 2024-10-09 Date of issue: 2024-10-09 Filename: 70133054_eng.pdf
2
L-
Connection Assignment
2 4
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com
[email protected] [email protected] [email protected] 2
Inductive sensor NJ2,5-14GM-N-V1-Y21146
Connection Assignment
Wire colors in accordance with EN 60947-5-6
1 BN (brown)
2 BU (blue)
Release date: 2024-10-09 Date of issue: 2024-10-09 Filename: 70133054_eng.pdf
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com
[email protected] [email protected] [email protected] 3
