ID–1008589

INSPECTION AND TESTING PLAN1

Upgrading of Rahman Mena's existing Canal road With Plum Concrete Surface (L=1038m) In Gozar #29, District #8,
Project Title/ Work Title
Kabul City
Contract No. 1012589

Employer UNOPS

Contractor Nimble Construction Copmpany (NCC)

Date ITP Updated 02-12-2024

ITP Number General ITP

Work Category Civil Work

Inspection/ Testing
Sub Grade, Sub- Base, Plum Concrete, PCC, CBR and FDT test and Concrete Mix Design
Item/s

1 The ITP can be tailored to suit the inspection and testing item(s) – materials, work item, process, etc.

INSPECTION AND TESTING PLAN 1 of 4 IPMG 2019

 ID–1008589

Inspection and Reference/ Inspection/ Acceptance Hol Inspection/

Item Test type/ Source Testing Criteria d Testing/ Stage Frequenc Verifying Docs/ Approval Comment
No. Requirement Document Method Prin Verification y of Test/ Demonstrated by/Sign s /Status
t Responsibility Inspectio Evidence off
n
Con
Emp
tra Clie
Min Max loye
cto nt
r
r
1. Materials

1.1 Sub-grad  BoQ (AASHTO No 90% Ye E2 H W Prior to Spec Test Reports CME
 MDD  Division T 180 or s actual Division
 Gradation #4701. ASTM D Minor execution #4202
 FDT 05 1557, street at site.
 CBR ASTM D and FDT
422 & 92% on
ASTM D prepared
1556 Major and
street compacted
sub-grad
layer

1.2 Sub- Base  BoQ Project Ye E3 H W Prior to Spec Test Reports CME
 Division sec.7202 s Carried Division
 CBR test #7105. table from crash #7200
 MDD test 01 522/1, plane at
 FDT 35% site
 Gradation ASTM project.
C131, 35% And FDT
on
BS812, prepared
ASTM and
C88, compacted
ASTMC14 60% base
2, ASTM course
C127, layer.

2 E- Execute W-Witness H – Hold

3 E- Execute W-Witness H – Hold

INSPECTION AND TESTING PLAN 2 of 4 IPMG 2019

 ID–1008589

ASTM D 95%
1883 &
AASHTO
T 180 or
ASTM D
1557,

1.3 Spec No 30Mp Ye E4 H W samples (3 tests Test Reports CME

Division a s taken from per
# the site. 5000
blocks)

1.4 PCC (25 Mpa) BoQ ASTM C No 25 Ye E5 H W Mix design Per Test Reports CME
and (15Mpa) Division # 39 MPA s carried out every
 Mix design 5901.01 on sample 15 Cum
of concrete and ASTM C that was
 Slump Test 5901.03 143 prior to
on site and carry from
 Temperatur 7105.01 ASTM C crash plant
e test on 1064 to the
site laboratory.
 Casting of Compressi
cylinder for ve
Compressiv strength
e Strength ASTM C test is
test 39 carried out
 Compressiv Upon
e strength pouring of
test on the concrete
lab on site

2. Work Installations

2.1

4 E- Execute W-Witness H – Hold

5 E- Execute W-Witness H – Hold

INSPECTION AND TESTING PLAN 3 of 4 IPMG 2019

 ID–1008589

Prepared by Enamullah Noori QC

Approved by CME/LCME or QA/QC Team

INSPECTION AND TESTING PLAN 4 of 4 IPMG 2019