2222
2222
L3 TOPS GIRLS
Treatment Code Treatment Type Comments
L2 SWTR GIRL
No Treatments available
Attributes
Carryover Style 7901657 FA24
Fast Track No
Comments
Solid Pointelle
FABRIC
YARN 60% COTTON 20% NYLON 20% VISCOSE mat #15040
Model Name GIRLS TOPS Size Code SMALL (7/8) MEDIUM (10) LARGE (12) XL (14/16) XXL (18/20)
Active Size Yes Yes Yes Yes Yes
Sample Size No No Yes No No
POM Code POM Description TOL (-) TOL (+)
* CARDI Grading 0 0 0 0 0
Spec Measure 0 0 0 0 0
NCK0001 FRONT NECK DROP - HPS TO 1ST BUTTON (CENTER) -0.250 0.250 Grading -0.250 -0.125 0 0.250 0.750
Spec Measure 5.500 5.625 5.750 6.000 6.500
NCK0002 BACK NECK DROP - HPS TO EDGE -0.250 0.250 Grading 0.000 0.000 0 0.000 0.000
Spec Measure 0.750 0.750 0.750 0.750 0.750
NCK0003 NECK WIDTH - EDGE TO EDGE -0.250 0.250 Grading -0.500 -0.250 0 0.250 0.500
Spec Measure 6.250 6.500 6.750 7.000 7.250
CHS0023 SHOULDER SLOPE -0.125 0.125 Grading -0.250 0.000 0 0.000 0.000
Spec Measure 1.000 1.250 1.250 1.250 1.250
CHS0025 FORWARD SHOULDER SEAM -0.125 0.125 Grading 0.000 0.000 0 0.000 0.000
Spec Measure 0.500 0.500 0.500 0.500 0.500
CHS0022 ACROSS SHOULDER -0.250 0.250 Grading -1.000 -0.500 0 1.000 1.750
Spec Measure 11.500 12.000 12.500 13.500 14.250
CHS0004 ACROSS FRONT 4" BELOW HPS -0.250 0.250 Grading -1.000 -0.500 0 1.000 1.750
Spec Measure 10.000 10.500 11.000 12.000 12.750
CHS0011 ACROSS BACK 4" BELOW HPS -0.250 0.250 Grading -1.000 -0.500 0 1.000 1.750
Spec Measure 10.500 11.000 11.500 12.500 13.250
ARM0002 ARMHOLE DROP - HPS STRAIGHT DOWN TO BTM OF ARMHOLE -0.250 0.250 Grading -0.500 -0.250 0 0.250 0.750
Spec Measure 7.250 7.500 7.750 8.000 8.500
SLV0014 ARMGIRTH CIRCUMFERENCE - 1" BELOW ARMHOLE -0.250 0.250 Grading -0.750 -0.375 0 0.500 0.750
Spec Measure 9.000 9.375 9.750 10.250 10.500
SLV0019 SLEEVE OPENING CIRCUMFERENCE - LONG -0.250 0.250 Grading -0.500 -0.250 0 0.125 0.250
Spec Measure 6.750 7.000 7.250 7.375 7.500
SLV0003 SLEEVE LENGTH - SHOULDER TO SLEV OPENING - LONG -0.500 0.500 Grading -1.250 -0.750 0 1.500 2.000
Spec Measure 19.000 19.500 20.250 21.750 22.250
Model Name GIRLS TOPS Size Code SMALL (7/8) MEDIUM (10) LARGE (12) XL (14/16) XXL (18/20)
Active Size Yes Yes Yes Yes Yes
Sample Size No No Yes No No
POM Code POM Description TOL (-) TOL (+)
CHS0032 CHEST CIRCUMFERENCE 1" BELOW ARMHOLE -0.500 0.500 Grading -3.000 -1.500 0 2.000 4.000
Spec Measure 27.000 28.500 30.000 32.000 34.000
HIP0028 SWEEP CIRCUMFERENCE - STRAIGHT @ EDGE -0.500 0.500 Grading -3.000 -1.500 0 2.500 5.000
Spec Measure 23.000 24.500 26.000 28.500 31.000
LGH0002 BACK LENGTH FROM HPS -0.375 0.375 Grading -1.000 -0.500 0 1.000 2.000
Spec Measure 16.000 16.500 17.000 18.000 19.000
TRM0016 NECK TRIM TUBULAR -0.125 0.125 Grading 0.000 0.000 0 0.000 0.000
Spec Measure 0.250 0.250 0.250 0.250 0.250
TRM0017 SLEEVE TRIM HEIGHT -0.125 0.125 Grading 0.000 0.000 0 0.000 0.000
Spec Measure 0.500 0.500 0.500 0.500 0.500
TRM0048 SWEEP TRIM HEIGHT -0.125 0.125 Grading 0.000 0.000 0 0.000 0.000
Spec Measure 0.500 0.500 0.500 0.500 0.500
DTL0011 CF PLACKET INCLUDE .25 TUBULAR -0.125 0.125 Grading 0.000 0.000 0 0.000 0.000
Spec Measure 0.875 0.875 0.875 0.875 0.875
Construction Information
Code GENERAL
Type
Construction Element
Specific Placement
Construction Details
Comment
- Please note the primary contact for SGS has changed. Updated contact information for Edwin Chow
October 2012 can be found below.
Valued Partner- - Clarification for section A, “once per season” is defined as once every three months.
In an effort to stay ahead of the curve and be an industry leader for innovation, we are introducing a new _ _ _ _ _
hanger program for Meijer apparel. Our hanger partner, Mainetti, has designed a completely new hanger for
June 2012
Meijer; from the architecture of the hanger to the shape of the sizer clip – each component is new and
innovative. Additionally, in alignment with the industry trend, the hangers will be black (with the exception of To our vendor partners:
the intimate apparel hanger which remains unchanged). The best news is that with all of these improvements,
the cost of our hangers will not increase. As you are aware, Meijer embarked on a new tag and label process beginning with the Fall 2011 season. As is
typical with any new process, there are inevitable adjustments and corrections, and this process has been no
The introduction of this new hanger program will begin with the ship date of June 1, 2013. It is mandated that exception.
all apparel programs use the new hangers. To insure 100% compliance, a $10,000 USD financial penalty will be
Overall, this process is working very well and has very few problems. Taking in to consideration the feedback
assessed to any vendor who does not comply or does not receive written approval from a Merchandise Manager we have received from some of you, we have made the following important updates:
to use an alternate hanger.
A. Samples from each printer, for each trim type, should be submitted to SGS once a season. Early on
Mainetti has manufactured hanger molds in all of our current countries of business and an initial inventory of in this process we had requested that samples be sent with each print run. We feel now that this is a
hangers will be produced. It is strongly recommended that each vendor contact Mainetti with their projections bit excessive. For example, if Printer-ABC receives an order for the same trim type from Vendor 1,
for the season so that they can ensure sufficient on-hand inventory. Vendor 2 and Vendor 3 – the printer needs to only submit that sample to SGS once within that
season.
A list of our hanger options, codes as well as the Mainetti order form can be found on our vendornet:
www.meijervendornet.com > sign in > product > floor ready > Related Documents B. Within the SGS online artwork request system, all artwork files now have a visible date code which
represents the most current version of that trim. If the artwork you have from a previous season
The Mainetti contacts for any questions regarding the Meijer program are: contains the same date code, there is no need to download the artwork again – what you have is
current. If the date code on your artwork does not match, then you must download new artwork. It
Elizabeth Herrera Francine Harkes is imperative at the beginning of a season that you check to insure the date code on your artwork is
Mainetti Mainetti the most current version.
115 Enterprise Ave S 115 Enterprise Ave S
Seacaucus, NJ 07094 Seacaucus, NJ 07094 The balance of the process remains unchanged.
[email protected] [email protected]
Direct Phone: (201)215-2931 Direct Phone: (201)215-2919 Overview:
In an effort to expedite orders, we have granted Avery Dennison an exemption from the PQM portion of the
process for internal labels only (any label sewn on the inside of the garment) – this includes printed labels,
As always, if you have any questions, please let me know. Thank you for your continued support. woven labels and heat transfer labels. This exemption applies to Avery Dennison only. Please note that this
exemption, effective April 18, 2011, does not apply to any external labels such as hang tags, joker tags, size
Kim Grant strips, stickers, package inserts, belly bands, etc. Avery will still be required to submit external labels to SGS for
Meijer Package Development Specialist evaluation.
[email protected]
A brief summary of the steps for our tag and label process is as follows.
1. Determine who is going to be your printer. If your chosen printer has already been qualified by SGS,
proceed to step 2. If your chosen printer has not yet been qualified by SGS, please contact Edwin
Chow at SGS to get the pre-qualification process started. There is a one-time fee of $350 USD to
have your printer qualified.
Comment Comment
Description Description
Comment Comment
08/26/2019 06/13/2018
Attachment Information
Attachment No IMAGE
Attached By 1957888
Date Attached 2024-11-13
Description
Attachment Information
Attachment No IMG1
Attached By 1957888
Date Attached 2024-11-13
Description