NeType: Multi-Mode base station

Template Type: Plan

Template Version: V3.0/V3.1

DataType: sdr3

1. You must fill in accordance with the

instructions of the 3 and 4 lines.
2. All enumerated type field, fill in the
memory value; other fields fill in the
Instructions： displayed value.
3. The 4 line is the attribute of field. I:Must
be filled; W:Can be modified; R:Can be
read; Primary Key:Must be filled, Can not be
modified.
 Import
Management Object Name Index Radio mode feature
sequence

Managed Network Element ManagedElement 1 All

Operator Operator 2 All

Cabinet Cabinet 3 All

Equipment Equipment 4 All

Time Device TimeDevice 5 All

IP Clock Parameters IpClock 28 All

Clock Device Clock 29 All

RU RU 6 All

Optical Port Device FiberDevice 7 All

PA PA 8 All

FCE Board FCE 9 All

Dry Contact Device DryContact 10 All

TMA Device Tma 11 All

AISG Device AISG 32 All

Power Outlet PowerOutlet 12 All

External Device EPm 13 All

Fiber Cable FiberCable 14 All

RF Cable RfCable 15 All

RF Extend Cable RfExtendCable 16 GU and CDMA

Transmission Network Transmission 26 GU and TDS

Physical Layer Port PhyLayerPort 17 All

Ethernet Link Layer EthernetLink 18 All

HDLC Channel Hdlc 19 GU and CDMA

PPP Link Ppp 20 GU and CDMA

IP Layer Configuration IpLayerConfig 21 All

Static Routing Configuration StaticRoute 22 All

BandwidthResource BandwidthResource 23 All

SCTP Sctp 24 GU, LTE, TDS

OMC Channel ItfUniBts 25 All

Service and DSCP Mapping ServiceMap 27 All

Antenna Attribute Object AntProfile 30 TDS and TDL
Ir Antenna Group Object IrAntGroup 31 TDS and TDL

TCP Tcp 33 CDMA

Channelized STM-1 ChannelizedStm1 34 TDS

ATM Layer Link AtmLayerLink 35 TDS

 Sheet
Remarks Associated MO
sequence
It represents the SDR base station in the wireless
SubNetwork,NEManagedElement,ConfigSet,ManagedEle
netork, that is, the network element. It is the root of
ment,Equipment,Cabinet,Rack,SubRack,Slot,PlugInUnit, 1
all MO nodes, providing services and management
SdrDeviceGroup,AuxUnit
functions. Refer to 3GPP TS32.622.
It represents the operator. When the NE resource is
Plmn 2
shared by multiple operators, use this MO.

It represents the configruation of the slave cabinet.

The master cabinet is created while creating ME. The
3
auxiliary cabinet is created while creating FCE of the
auxiliary cabinet.

PlugInUnit,SdrDeviceGroup,StatRefreshActDevice,ActDe
viceSet,ActDevice,RstActDevice,HwInfoQryActDevice.
CC board, also create:
McDeviceSet,McDevice,ClockDeviceSet,TimeDeviceSet,
TimeDevice,GeDeviceSet,GeDevice,EnvMonDeviceSet,E
nvMonDevice,PoRstActDevice.
It represents the board planning of the BBU device. 4
BPL board, also create:
BpDeviceSet,BpDevice,FiberDeviceSet,BlockActDevice,
PoRstActDevice.
PM board, also create: PmDeviceSet,PmDevice
FAN board, also create:
FanDeviceSet,FanDevice,FanCtrlActDevice

Indicates parameters for time information, such as the

5
NTP and summer time.
It represents parameter configuration related to
UDP 6
IEEE1588 clock.
It represents the clock reference source. ClockDeviceSet,ClockDevice 7
PlugInUnit,SdrDeviceGroup,RfDeviceSet,RfDevice,Fiber
DeviceSet,AisgDeviceSet,Pa,TxChannel,RxChannel,Stat
It represents the the RU device planning. RefreshActDevice,ActDeviceSet,ActDevice,RstActDevic 8
e,HwInfoQryActDevice,EnvMonDeviceSet,EnvMonDevi
ce,DryContactDeviceSet,DryContactDevice.

It represents the configruation of the fiber device. It

9
is created while create a RU. Only for M operator.

It represents the power amplifier in the remote unit

(RU). It is created while create a RU. Only for M 10
operator.
It represents the fan control and environmental
monitoring board. The master, slave or auxiliary If FCE is a FCE of auxiliary cabinet, create the auxiliary
11
cabinet of FCE can be configured, the last attribute is cabinet by auxiliary cabinet number.
configured auxiliary cabinet number.
It represents a dry contact port. Currently it only
exists on the SA, SE, FCE boards and radio 12
frequency boards.
It represents the TMA object, TMA control object is
used to configure complementary tower amplifier 13
gain and other parameters.
It represents the AISG device object, it is an abstract
of the AISG control port. It is used for RET to
14
control the antenna tilt, and for the signal
amplification of TMA.
It represents a power outlet. It only exists on the
15
TAM board and RU currently.
It represents external device, such as embedded
16
power and shelter.
Indicates the optical fiber resources, referring to the
baseband unit (BBU) and Remote Unit(RU), or
17
referring to the connection between two BBUs in
stack mode.
Indicates radio frequency (RF) feeder cable Create an AntEntity record.
resources. It represents the connection between the If the radio mode is TDS or TDL, IrAntGroup create the
18
RF interface of a remote unit (RU) and the RfCable between the ant and the RF port, it need not be
antenna/tower mounted amplifier (TMA). configured in the sheet.
Indicate the radio frequency (RF) extended cable
resources. It represents the connection between two 19
RU RF ports (RxOut and RxIn).
It represents the transmission resource of the network
element. It is the root node of all transmission 20
resource.
It represents the physical layer of IP or ATM
transmission protocol. The physical layer bearer 21
includes E1, T1, and Ethernet.
It represents the Ethernet link layer between the base
22
station and the upper-level NE.
Represents the HDLC protocol. 23
Represents the PPP protocol. Data transmission is
implemented through the point-to-point connection 24
established through dialing or dedicated cable.
If the attribute is filled, the system will create the
It represents the IP-layer configuration. corresponding "ServiceMap" record, need not fill 25
"ServiceMap" sheet.
It represents static route configuration. 26

It is used to divide bandwidth. Multi-mode need

BandwidthResourceGroup,BandwidthResource 27
cofigure.
It represents the SCTP protocol (RFC 2960:Stream
Control Transmission Protocol). It provides a stable
and sequential data transmission service between two If radio mode is LTE, crate S1AP or X2AP. 28
endpoints. It is used for signaling transmission in the
IP network.
It represents the O&M interface between NE and
MNS, that is, Itf-B (OMCB channel). Itf-B
connection is implemented either through direct
29
connection or through the connection with
RNC/BSC. For detailed information, refer to 3GPP
TS32.101.
If the "radioMode" attribute of the "IpLayerConfig
Configure service and DSCP mapping. 30
"sheet is filled, need not fill this sheet.
It represents the antenna attribute. 31
It represents the IR antenna group. IrAntGroup,AntEntity,RfCable 32
It represents the TCP protocol (RFC
793:Transmission Control Protocol). It provides a
stable and sequential data transmission service 33
between two endpoints. It is used for signaling
transmission in the IP network.
It represents the Channelized STM-1, for ATM
34
trasmission.
It represents the ATM layer link , for ATM
35
trasmission.
 Result MODIND SubNetwork MEID USERLABEL
Modification
SubNetwork ID ManagedElement ID NE Name
Result Indication

A,D,M long:[0..999999] long:[0..4294967295] string:[0..128]

S:Success
F:Fail

If RADIOMODE include User-defined

A:Add, D:Delete, CDMA, the value is 1..1500, information.
unique in OMMB.
M:Modify, P:Pass the other is 0..1000000. Cannot use invalid
unique in subnetwork. character &'"<>

Primary Key Primary Key R-W

a 24 1084 IKH008_LCK
 RADIOMODE SWVERSION METYPE BBUTYPE

Radio Standard NE Version NE Type BBU Type

sequence<long, 8> string:[0..128] string:[0..128] long

1:UMTS{UMTS},
2:GSM{GSM}, BS8700,BS8800,BS8900,BS890
4:TD-SCDMA{TD-SCDMA}, Software version of network 0B,
8:CDMA{CDMA}, element. BS8900A,BS8906,BS8908,BS89
16:LTE FDD{LTE FDD}, The value is related with 06E,
32:TD-LTE{LTE TDD} RADIOMODE, must be BS8800 U120,
multimode format, eg: 4;32 modified at the same time. BS8800 U240,
0:BBU-2U{BBU-2U},
Only expanding radio mode can Only expanding radio mode BS8800 GU360,
4:BBU-3U{BBU-3U},
be modified. can be modified. BS8900 U240,
5:Integration{Integration}
eg:GU->GUL, it can be modified. eg:GU->GUL, it can be BS8900 GU360,
The value is related with modified. BS8800 U120A,
SWVERSION, must be modified It can not be modified from a BS8900 Z01S80,
at the same time. radio mode to another radio BS8900 Z01S18,
It can not be modified from a mode. BS8900 Z02USG,
radio mode toR-W-I
another radio R-W-I BS8912 U2100R-I R-I
mode.
2 UniRan 12.3(GU V4.12.10.1BS8700 0
 EXTERANLIP LOCATIONNAME TRNCID RNCID GBSCID
Network Element TD-SCDMA
Exteranl IP UMTS RNC ID GSM BSC ID
Address RNC ID

string:[0..128] string:[0..128] long:[0..65535] long:[0..65535] long:[0..65535]

IP address of the base station, It can

be IPv4 address or IPv6 address, the
IPv4 address format is dotted
decimal notation, i.e. 10.0.0.1, IPv6 Geographical information
address is colon hexadecimal of the network element, If TDS, it can be If UMTS, it can If GSM, it can it
notation, i.e. which is input by user. filled. be filled. be filled.
2011:0db8:85a3:0000:1319:8a2e:03 Cannot use invalid Home RNC ID Home RNC ID Home BSC ID
70:7366. It cannot be configured character &'"<>
with the IP address of the 192
network segment and the 200
network segment.
R-W-I R-W R-W R-W R-W
10.216.88.198 Gujrat 65535 65535 24
 LONGITUDE LATITUDE operatorPlannedId vendorPlannedId
Network Element ID planned Network Element ID
Longitude Latitude
by operator planned by vendor

double:[-180..180] double:[-90..90] string:[0..48] string:[0..48]

Longitude of the Latitude of the

network element, network element,
Vendor plans the unique
which is used for which is used for Operator plans the unique
network element ID for
displaying the displaying the network element ID for base
base station. Users cannot
network topology in network topology in station. Users cannot set the
set the option if it is not
the network the network option if it is not be planed.
be planed.
management system. management system. Cannot use invalid character
Cannot use invalid
6 after the decimal 6 after the decimal &'"<>
character &'"<>
point is retained. point is retained.
eg:20.056921 eg:20.056921

R-W R-W R-W R-W

180 90
 functionSwitch brokenTolerantTime MAINTAINSTATUS CutoverStatus
Configuration for Tolerance duration of the
Maintenance Status Cutover Status
rollback switch first link broken
0:Normal,
2:Testing,
0:Close, 0:Swapping,
long:[15..1000] unit:min 3:Configuring,
1:Open 1:Normal
5:FM Testing,
6:PM Testing

SON configuration
recovery.
SON configuration
When the link-broken time
recovery.
of LMT O&M channel and
Enable or disable the defaut value: 3 defaut value: 1
OMC O&M channel
function of configuration
exceeds this duration, the
rollback.
configuration data of BS is
automatically rolled back.

R-W R-W R-W R-W

0 30 0 1
 CABINETTYPE

Main cabinet type

string:[0..128]

Cannot use invalid

character &'"<>

R-W
default
 RESULT MODIND SubNetwork MEID

Result Modify Indication SubNetwork ID ManagedElement ID

S:Success A,D,M long:[0..999999] long:[0..4294967295]
F:Fail

A:Add, D:Delete,
unique in OMMB. unique in subnetwork
M:Modify, P:Pass

Primary Key Primary Key

a 24 1084
 operatorName userLabel mcc

Operator Name Operator Information MCC

string[1..127] string[0..128] string[3..3]

Operator Name.
User-defined information. The MCC part of a
Cannot use invalid character &'"<>!@#$
Cannot use invalid character PLMN identity used in
%^:;
&'"<> the radio network.
eg:China Mobile Communication Corp
Primary Key R-W Primary Key
Telenor 410
 mnc

MNC
string[2..3]

The MNC part of a PLMN

identity used in the radio
network.

Primary Key
06
 Result MODIND SubNetwork MEID cabinetNo

Modification
SubNetwork ID ManagedElement ID Cabinet number
Result Indication
S:Success A,D long:[0..999999] long:[0..4294967295] long:[2..200]
F:Fail

Unique identification of the

A:Add, cabinet.
D:Delete, unique in OMMB. unique in subnetwork The master rack cabinet is
P:Pass created while create ME, it's
number is fixed to 1.

Primary Key Primary Key Primary Key

LTE FDD:
ZXSDR RC8910
ZXSDR RC8911
cabineType
ZXSDR RC8910A
ZXSDR RC8911A
ZXSDR RC8810
Cabinet type information
RC8910B
CDMA:
RC8800 string
RC8910
RC8911
RC8910A
RC8911A
U/G/GL/UL/GUL:
RC8910B
RC8910
RC8911
RC8931
RC8810
RC8910A R-I
RC8911A
Z02USG-2
Z02USG-3
Z01S18-2
Z01S18-3
Z01S80-2
RC8910B-7-RC
RC8910B-9-RC
 Result MODIND SubNetwork MEID ShelfNo

Modification Indication SubNetwork ID ManagedElement ID No. of the Shelf

Result
S:Success long:[1..2]
A,M long:[0..999999] long:[0..4294967295]
F:Fail default:1

A:Add,
M:Modify(Only can delete No. of the Shelf.
or add the board of the slot, It is 1.
unique in OMMB. unique in subnetwork
can not modify the board when the shelf is
type of the slot), cascade, it is 2.
P:Pass

Primary Key Primary Key R-I

a 24 1084 1
 radioMode:0
functionMode:0
The second value combination:
Board Type: FS
radioMode:0
functionMode:1:Not CRAN Mode,
Slot1 Slot2 2:CRAN Mode,4:GSM Slot3
36 carrier
physicalBrdType: default:255
0:FS0 board,
the Boad inforatiom of this slot the Boad inforatiom of this slot 3:FS3 board,
the Boad inforatiom of this slot
4:FS4 board,
5:FS5 board,
string string string board,
6:FS5A
7:FS5B board,
8:FS5C board,
Format: The first value combination: 9:FS3A board,
BoardType, radioMode, Board Type: CC,CCC,UES,CCE 255:Invalid
functionMode(Optional),physicalB radioMode:0 The third value combination:
rdType(Optional), functionMode:0 Board Type:
BoardType: eg:CC,0,0 or CC,0 BPL,BPL1,NIS,NIS1,UORM,UBPM,UBPI,
CC,CCC,CCE The second value combination: UBPG2,CVI1
radioMode:0. Board Type: TAM0,TAM1,TAM2 radioMode:
functionMode:0. radioMode:1, 2, 1;2 multimode value format, eg: 4;32
eg:CC,0,0 or CC,0 functionMode:0 1:UMTS{UMTS},
2:GSM{GSM},
4:TD-SCDMA{TD-SCDMA},
R R R
8:CDMA{CDMA},
CC,0,0,255 FS,0,1,255
16:LTE FDD{LTE FDD},
32:TD-LTE{LTE TDD}
functionMode:
0:GSM Single Mode, UMTS Single Mode,
GSM/UMTS Mixed Mode,
LTE FDD: 1:LTE-FDD Single
Mode,2:LTE_FDD-IRC,3:LTE-FDD Single
Mode(IQ Compressed),
TD-LTE: 100663297:LTE-
IR,100663305:LTE-IR(IQ
Compressed),100663553:LTE-IR-IRC,
TD-SCDMA: 50331653:TD-SCDMA
IR,50331649:LTE-IR,50331657:LTE-IR(IQ
Compressed),50331652:GBRS
radioMode:0
functionMode:0
The second value combination:
Board Type: FS
radioMode:0
functionMode:1:Not CRAN Mode,2:CRAN
Slot4 The first value combination:
Slot5
Mode,4:GSM 36 carrier
Board Type: UES,UCI,SE,FS1
physicalBrdType: default:255
radioMode:0
0:FS0 board,
functionMode:0
3:FS3 board,
the Boad inforatiom of this slot the Boad inforatiom of this slot
The second value combination:
4:FS4 board,
Board Type:
5:FS5 board,
string BPL,BPL1,NIS1,UORM,UBPM,UBPI,BPC,UBPG,
string
6:FS5A board,
TAM0,TAM1,UBPG2,TAM2,USR1-
7:FS5B board,
A,UBPG3,BPK,BPK_s,BPK_e(2U),BPK_e1(2U),C
8:FS5C board,
HV0,CHV2,CHV3,CHD0,CHD1,BPK_d
9:FS3A board,
radioMode:
255:Invalid
multimode value format, eg: 4;32
The third value combination:
1:UMTS{UMTS},
Board Type:
2:GSM{GSM},
BPL,BPL1,NIS,NIS1,UORM,UBPM,UBPI,BPC
4:TD-SCDMA{TD-SCDMA},
,UBPG,TAM0,TAM1,UBPG2,TAM2,UBPG3,C
8:CDMA{CDMA},
VI1,BPK_e,BPK_e1,UBPG3(3U),
16:LTE FDD{LTE FDD},
radioMode:
32:TD-LTE{LTE TDD}
multimode value format, eg: 4;32
functionMode:
1:UMTS{UMTS},
0:GSM Single Mode, UMTS Single Mode,
2:GSM{GSM},
R GSM/UMTS Mixed Mode, R
4:TD-SCDMA{TD-SCDMA},
LTE FDD: 1:LTE-FDD Single Mode,2:LTE_FDD-
8:CDMA{CDMA},
IRC,3:LTE-FDD Single Mode(IQ Compressed),
16:LTE FDD{LTE FDD},
TD-LTE: 100663297:LTE-IR,100663305:LTE-
32:TD-LTE{LTE TDD}
IR(IQ Compressed),100663553:LTE-IR-IRC,
functionMode:
TD-SCDMA: 50331653:TD-SCDMA
0:GSM Single Mode, UMTS Single Mode,
IR,50331649:LTE-IR,50331657:LTE-IR(IQ
GSM/UMTS Mixed Mode,
Compressed),50331652:GBRS
LTE FDD: 1:LTE-FDD Single
Mode,2:LTE_FDD-IRC,3:LTE-FDD Single
Mode(IQ Compressed),
TD-LTE: 100663297:LTE-IR,100663305:LTE-
IR(IQ Compressed),100663553:LTE-IR-IRC,
TD-SCDMA: 50331653:TD-SCDMA
IR,50331649:LTE-IR,50331657:LTE-IR(IQ
Compressed),50331652:GBRS
The first value combination: The first value combination:
The first value combination:
Board Type: UES,UCI,SE,FS1 Board Type: UES,UCI,SE,FS1
Board Type: UES,UCI,SE,FS1
radioMode:0 Slot6 radioMode:0 Slot7 Slot8
radioMode:0
functionMode:0 functionMode:0
functionMode:0
The second value combination: The second value combination:
The second value combination:
Board Type: Board Type:
the Boad inforatiom of this slot the Boad inforatiom of this slot BoardtheType:
Boad inforatiom of this slot
BPL,BPL1,NIS1,UORM,UBPM,UBPI,B BPL,BPL1,NIS1,UORM,UBPM,UBPI,
BPL,BPL1,NIS1,UORM,UBPM,UBPI,
PC,UBPG,TAM0,TAM1,UBPG2,TAM2, BPC,UBPG,TAM0,TAM1,UBPG2,TA
BPC,UBPG,TAM0,TAM1,UBPG2,TA
USR1- string M2,USR1- string string
M2,UBPG3,BPK,BPK_s,BPK_e(2U),B
A,UBPG3,BPK,BPK_s,BPK_e(2U),BPK A,UBPG3,BPK,BPK_s,BPK_e(2U),BP
PK_e1(2U),CHV0,CHV2,CHV3,CHD0,
_e1(2U),CHV0,CHV2,CHV3,CHD0,CH K_e1(2U),CHV0,CHV2,CHV3,CHD0,
CHD1,BPK_d
D1,BPK_d CHD1,BPK_d
radioMode:
radioMode: radioMode:
multimode value format, eg: 4;32
multimode value format, eg: 4;32 multimode value format, eg: 4;32
1:UMTS{UMTS},
1:UMTS{UMTS}, 1:UMTS{UMTS},
2:GSM{GSM},
2:GSM{GSM}, 2:GSM{GSM},
4:TD-SCDMA{TD-SCDMA},
4:TD-SCDMA{TD-SCDMA}, 4:TD-SCDMA{TD-SCDMA},
8:CDMA{CDMA},
8:CDMA{CDMA}, 8:CDMA{CDMA},
16:LTE FDD{LTE FDD},
16:LTE FDD{LTE FDD}, 16:LTE FDD{LTE FDD},
32:TD-LTE{LTE TDD}
32:TD-LTE{LTE TDD} 32:TD-LTE{LTE TDD}
functionMode:
functionMode: functionMode:
0:GSM Single Mode, UMTS Single
0:GSM Single Mode, UMTS Single 0:GSM Single Mode, UMTS Single
Mode, GSM/UMTS Mixed Mode,
Mode, GSM/UMTS RMixed Mode, Mode, GSM/UMTSRMixed Mode, R
LTE FDD: 1:LTE-FDD Single
LTE FDD: 1:LTE-FDD Single LTE FDD:
UBPG,2,0,2551:LTE-FDD Single UBPG,2,0,255
Mode,2:LTE_FDD-IRC,3:LTE-FDD
Mode,2:LTE_FDD-IRC,3:LTE-FDD Mode,2:LTE_FDD-IRC,3:LTE-FDD
Single Mode(IQ Compressed),
Single Mode(IQ Compressed), Single Mode(IQ Compressed),
TD-LTE: 100663297:LTE-
TD-LTE: 100663297:LTE- TD-LTE: 100663297:LTE-
IR,100663305:LTE-IR(IQ
IR,100663305:LTE-IR(IQ IR,100663305:LTE-IR(IQ
Compressed),100663553:LTE-IR-IRC,
Compressed),100663553:LTE-IR-IRC, Compressed),100663553:LTE-IR-IRC,
TD-SCDMA: 50331653:TD-SCDMA
TD-SCDMA: 50331653:TD-SCDMA TD-SCDMA: 50331653:TD-SCDMA
IR,50331649:LTE-IR,50331657:LTE-
IR,50331649:LTE-IR,50331657:LTE- IR,50331649:LTE-IR,50331657:LTE-
IR(IQ Compressed),50331652:GBRS
IR(IQ Compressed),50331652:GBRS IR(IQ Compressed),50331652:GBRS
 Only for BBU-3U
Only for BBU-3U
The first value combination:
The first value combination:
Board Type: UCI,UES
Board Type: UCI,UES
radioMode:0
radioMode:0
Only for BBU-3U functionMode:0
Slot9 Slot10 functionMode:0
Slot11
The first value combination: The second value combination:
The second value combination:
Board Type: UCI,UES Board Type:
Board Type:
radioMode:0 BPL,BPL1,NIS1,UORM,UBPI,U
BPL,BPL1,NIS1,UORM,UBPI,
functionMode:0
the Boad inforatiom of this slot BPM,UBPM,UBPG,UBPG3,UBP
the Boad inforatiom of this slot the Boad inforatiom of this slot
UBPM,UBPM,UBPG,UBPG3,
The second value combination: G2,CHV0,CHV2,CHV3,CHD0,C
UBPG2,CHV0,CHV2,CHV3,C
Board Type: HD1
string HD0,CHD1 string
BPL,BPL1,NIS1,UORM,UBPI,UBPM,UBPG,U radioMode: string
radioMode:
BPG3,UBPG2,CHV0,CHV2,CHV3,CHD0,CHD multimode value format, eg: 4;32
multimode value format, eg:
1 1:UMTS{UMTS},
4;32
radioMode: 2:GSM{GSM},
1:UMTS{UMTS},
multimode value format, eg: 4;32 4:TD-SCDMA{TD-SCDMA},
2:GSM{GSM},
1:UMTS{UMTS}, 8:CDMA{CDMA},
4:TD-SCDMA{TD-SCDMA},
2:GSM{GSM}, 16:LTE FDD{LTE FDD},
8:CDMA{CDMA},
4:TD-SCDMA{TD-SCDMA}, 32:TD-LTE{LTE TDD}
16:LTE FDD{LTE FDD},
8:CDMA{CDMA}, functionMode:
32:TD-LTE{LTE TDD}
16:LTE FDD{LTE FDD}, 0:GSM Single Mode, UMTS
functionMode:
32:TD-LTE{LTE TDD} Single Mode, GSM/UMTS Mixed
0:GSM Single Mode, UMTS
functionMode: Mode,
Single Mode, GSM/UMTS
0:GSM Single Mode, UMTS Single Mode, LTE FDD: 1:LTE-FDD Single
Mixed Mode,
GSM/UMTS Mixed Mode, Mode,2:LTE_FDD-IRC,3:LTE-
R R LTE FDD: 1:LTE-FDD
R Single
LTE FDD: 1:LTE-FDD Single FDD Single Mode(IQ
Mode,2:LTE_FDD-
Mode,2:LTE_FDD-IRC,3:LTE-FDD Single Compressed),
IRC,3:LTE-FDD Single
Mode(IQ Compressed), TD-LTE: 100663297:LTE-
Mode(IQ Compressed),
TD-LTE: 100663297:LTE-IR,100663305:LTE- IR,100663305:LTE-IR(IQ
TD-LTE: 100663297:LTE-
IR(IQ Compressed),100663553:LTE-IR-IRC, Compressed),100663553:LTE-IR-
IR,100663305:LTE-IR(IQ
TD-SCDMA: 50331653:TD-SCDMA IRC,
Compressed),100663553:LTE-
IR,50331649:LTE-IR,50331657:LTE-IR(IQ TD-SCDMA: 50331653:TD-
IR-IRC,
Compressed),50331652:GBRS SCDMA IR,50331649:LTE-
TD-SCDMA: 50331653:TD-
IR,50331657:LTE-IR(IQ
SCDMA IR,50331649:LTE-
Compressed),50331652:GBRS
IR,50331657:LTE-IR(IQ
100663305:LTE-IR(IQ
Compressed),50331652:GBRS
Compressed)
Only for BBU-3U
The first value combination:
Board Type: UCI,UES
radioMode:0
functionMode:0Slot12 Slot13 Slot14 Slot15
The second value combination:
Board Type: the Boad
the Boad inforatiom of the Boad inforatiom
BPL,BPL1,NIS1,UORM,UBPI,U
the Boad inforatiom of this slot inforatiom of this
this slot of this slot
BPM,UBPM,UBPG,UBPG3,UBP slot
G2,CHV0,CHV2,CHV3,CHD0,C
HD1 string string string string
radioMode:
multimode value format, eg: 4;32
1:UMTS{UMTS},
2:GSM{GSM}, Board Type:
Board Type:
4:TD-SCDMA{TD-SCDMA}, PM, PMAC0(Only for
PM(Only for BBU-
8:CDMA{CDMA}, BBU-2U), SE(Only for
2U), FAB(Only for
16:LTE FDD{LTE FDD}, SA,0,0 BBU-3U)
BBU-3U)
32:TD-LTE{LTE TDD} radioMode:0
radioMode:0
functionMode: functionMode:0
functionMode:0
0:GSM Single Mode, UMTS eg:PM,0,0
Single Mode, GSM/UMTS Mixed
Mode,
LTE FDD: 1:LTE-FDD Single
R R R R
Mode,2:LTE_FDD-IRC,3:LTE-
FDD Single Mode(IQ SA,0,0,255 PM,0,0,255
Compressed),
TD-LTE: 100663297:LTE-
IR,100663305:LTE-IR(IQ
Compressed),100663553:LTE-
IR-IRC,
TD-SCDMA: 50331653:TD-
SCDMA IR,50331649:LTE-
IR,50331657:LTE-IR(IQ
Compressed),50331652:GBRS
 Slot16 Slot17

the Boad inforatiom of this the Boad inforatiom

slot of this slot

string string

Board Type:
FAB(Only for BBU-2U), Only for BBU-3U
PM, PMAC0(Only for Board Type:PM
BBU-3U) radioMode:0
radioMode:0 functionMode:0
functionMode:0 eg:PM,0,0
eg:PM,0,0

R R
 RESULT MODIND SubNetwork MEID TimeDevice

Modification
SubNetwork ID ManagedElement ID Time Device
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295] string
F:Fail

It represents the slot of the

A:Add, D:Delete, Main Control Device,
unique in OMMB. unique in subnetwork
M:Modify, P:Pass Format:SlotNo
value:1 or 2

Primary Key Primary Key Primary Key

a 24 1084 1
 0:GMT - 12:00{GMT - 12:00},
2:GMT - 11:00{GMT - 11:00},
4:GMT - 10:00{GMT - 10:00},
6:GMT - 9:00{GMT - 9:00},
8:GMT - 8:00{GMT - 8:00},
10:GMT - 7:00{GMT - 7:00},
ntpServerIpAddr timeZone - 6:00},
12:GMT - 6:00{GMT isSuppSummTime summTimeStart
14:GMT - 5:00{GMT - 5:00},
15:GMT - 4:30{GMT Support summer time or
NTP Server IP Address Time Zone- 4:30}, Summer time start
16:GMT - 4:00{GMT - 4:00}, not
17:GMT - 3:30{GMT - 3:30},
string[1..127] long - 3:00},
18:GMT - 3:00{GMT long string:[0..20]
20:GMT - 2:00{GMT - 2:00},
22:GMT - 1:00{GMT - 1:00},
24:GMT - 0:00{GMT - 0:00}, Indicates the start time of
26:GMT + 1:00{GMT + 1:00}, summer time. It is allowed
The address of the NTP
28:GMT + 2:00{GMT + 2:00}, 1:Yes, that the summer time is a
server. The base station gets
30:GMT + 3:00{GMT + 3:00}, 0:No cross-year range.
the NTP time from the server.
31:GMT + 3:30{GMT + 3:30}, Format: MM-dd HH:mm,
32:GMT + 4:00{GMT + 4:00}, eg:07-11 13:57
33:GMT + 4:30{GMT + 4:30},
34:GMT + 5:00{GMT + 5:00},
R-W-I R-W-I + 5:30},
35:GMT + 5:30{GMT R-W-I R-W
129.200.0.5 34
51:GMT + 5:45{GMT + 5:45}, 0
36:GMT + 6:00{GMT + 6:00},
37:GMT + 6:30{GMT + 6:30},
38:GMT + 7:00{GMT + 7:00},
40:GMT + 8:00{GMT + 8:00},
42:GMT + 9:00{GMT + 9:00},
43:GMT + 9:30{GMT + 9:30},
44:GMT + 10:00{GMT + 10:00},
46:GMT + 11:00{GMT + 11:00},
48:GMT + 12:00{GMT + 12:00},
50:GMT + 13:00{GMT + 13:00}
 summTimeEnd summerTimeoffset ntpServerStdIpAddr

SNTP standby server IP

Summer time end Daylight saving time offset
address
string:[0..20] long:[1..42] string[1..127]

Indicates the end time of

summer time. It is allowed When the daylight saving Use standby server to
that the summer time is a time is enabled, it is used to synchronize time when
cross-year range. configure its offset (time the active server is
Format: MM-dd HH:mm, granularity is 15 minutes). abnormal.
eg:07-11 13:57

R-W R-W R-W

4 129.200.0.5
 Result MODIND SubNetwork MEID IpClockProfileId

Modification Object ID of IP clock

SubNetwork ID ManagedElement ID
Result Indication parameters

A,D,M long:[0..999999] long:[0..4294967295] long:[1..32] step 1

S:Success
F:Fail

A:Add, IP clock number. You

D:Delete, can set it within the
unique in OMMB. unique in subnetwork
M:Modify, value range. unique in
P:Pass ME.

Primary Key Primary Key Primary Key

a 24 1084 1
a 24 1084 2
a 24 1084 3
a 24 1084 4
 clockType linkPriority networkProtocol transType

1588 clock device type Link priority PTP network protocol IP clock transmission mode

1:IPV4, long:[0,1,2]
long:[1..2] long:[1..32] 2:IPV6, 0:Multicast, 1:Unicast,
3:Ethernet 2:Hybridcast
{networkProtocol==3}
[0:Multicast],
1:Ordinary clock,
{networkProtocol==1 || 2}
2:Boundary clock
IP clock link priority. This attribute is valid when [0:Multicast, 1:Unicast,
unique in ME.
1 indicates the clockType is 1588 clock. 2:Hybridcast]
Indicate the 1588 clock
highest priority. PTP network protocol. This attribute is valid when
device type adopted by
clockType is 1588 clock.
BS.
1588 clock message
R-W R-I R-I R
transmission mode.
1 1 1 1
1 2 1 1
1 3 1 1
1 4 1 1
 syncServerAddr enableNegotiation refIpLayerConfig

Enable link setup by Used IP Layer Configuration by 1588

1588 Synchronization server IP address
negotiation IPClock

1:Yes,
IP Address long:[0..19]
0:No
This attribute is valid when
clockType is 1588 clock and
networkProtocol is 1, 2.
This attribute is valid when clockType is
This attribute is valid when The value is "ipNo" of IpLayerConfig
1588 clock and transType is 1:Unicast.
clockType is 1588 clock. sheet.
IP address of 1588 clock synchronization
Indicates whether to enable refIpLayerConfig or refEthernetLink
server. If this link used for 1588
link setup by negotiation. must config a field.
clock,need config.
Configuration of IP layer that bears
R-W R-W 1588 IPClock. R
Format:ipNo, eg:1
10.216.87.65 1 0
10.216.87.69 1 0
10.216.87.73 1 0
10.216.87.77 1 0
 refEthernetLink vid

Used Ethernet Link No. VLAN ID

long:[0..4] long:[1..4094]

This attribute is valid when

clockType is 1588 clock and
This attribute is valid
networkProtocol is 3.
when refEthernetLink is
refIpLayerConfig or
configured.
refEthernetLink must config a
Same as a VLAN in
field.
used ethernet link.
The value is "ethernetLinkNo" of
the EthernetLinkRsheet. R
 Result MODIND SubNetwork MEID ClockDevice

Modification
SubNetwork ID ManagedElement ID Clock Device
Indication
Result

A,D,M long:[0..999999] long:[0..4294967295] string

S:Success
F:Fail

It represents the slot of the

A:Add, D:Delete, Main Control Device,
unique in OMMB. unique in subnetwork
M:Modify, P:Pass Format:SlotNo
value:1 or 2

Primary Key Primary Key Primary Key

a 24 1084 1
 clockPriority clockSyncMode clockType receiverHardwareType
1:Inner GNSS,
Clock priority of clock Clock synchronization 2:Outer
Clock facepanel GNSS,type of clock
reference source
3:Outer backpanel GNSS, GNSS Receiver Hardware Type
reference source type mode device
17:RRU inner GNSS,
If the value is 10 or 11, IpClock must
4:1PPS+TOD,
be configured.
5:GNSS cascade clock, 0:USR_A,
0:Frequency TD-SCDMA:1,2,3,4,10,14
14:1PPS+TOD backup, 2:Outer compass receiver,
long:[1..8] synchronization, LTE-TDD:1,2,3,4,10,11,17,19
19:Backplane 1PPS+TOD, 3:RGPS,
1:Phase synchronization LTE-FDD:1,4,5,6,7,8,10,11,13,19
6:BITS-2MHz clock, 4:UCI_RGPS,
GU:1,3,4,5,6,7,8,11,13,19
7:BITS-2Mbps clock, 5:UCI_COMPASS
CDMA:1,2,4,10,11
8:Line clock-local board,
LTE-TDD PICO:1,10,11,18
13:SyncE clock,
UMTS-PICO:2,11,13
10:SyncE+1588 clock, This attribute is valid when
LTE-FDD PICO:1,10,11
TD-SCDMA, LTE-TDD, 11:1588, clockType is 2 or 3.
The priority of the Corresponding clock reference source
18:Network Listenning
CDMA only support 1. clockType is 2, the value: TDS,
clock reference source. types are selected according to different
Synchronization mode of TDL: 4,5.
1 indicates the highest clock reference source categories.
site and clock reference clockType is 3, the value: 0,4,5.
priority. For GNSS category clock, inner GNSS
source. Indicate GNSS receiver hardware
clock is selected when accessing GPS
type configuration.
on CC board SMA interface.
Outer backpanel GNSS clock is
Primary Key R-W-I R-I slot of BBU-2U
selected when the 5th R-W
1 0 11
or 7th slot of BBU 3U accesses UCI or 3
USR.
Outer facepanel GNSS clock is selected
when the reference clock source is
accessed with cables on the CC front
panel HDMI interface.
 receiverType receiverOperatingMode minStarNum

GNSS receiver working type Receiver operating mode Minimum number of search stars

1:GPS,
2:GLONASS,3:GPS+GLONASS,5:COMPASS, 1:Survey In,
long:[1..4]
7:COMPASS priority, 8:GPS priority,13:Receiver 2:Fixed Mode
self-adaptive

This attribute is valid when This attribute is valid when

This attribute is valid when clockType is 2 or 3.
clockType is GNSS. receiverOperatingMode is 2.
{receiverHardwareType==2}: 1, 5, 7, 8;
Indicate the operating mode Indicate minimum number of
{receiverHardwareType==0}: 1,2,3;
configuration of the GNSS satellites for satellite timing. It is
{receiverHardwareType==5}: 1,5,7,8,13;
receiver. "Fixed Mode" is also the parameter of satellite
{receiverHardwareType==3 || 4}: 1.
recommended but "Survey In" is alarm threshold and the default
Indicate the working type of GNSS receiver.
not recommended. value is 4.

R-W R-W R-W

1 1 4
 enableSyncE isSSM

Enable SyncE Enable SSM

This attribute is valid, when

clockType is 13 or clockType is 10
1:Yes, 1:Yes,
and enableSyncE is 1.
0:No 0:No
The value can be "Yes" , only when
the clock reference source type is
'SyncE clock'.
Indicates whether the clock upload
mode is Synchronization Status
Message (SSM). SSM is the quality
level for sending timing signals
This attribute is valid, through the timing synchronization
when clockType is 10. link in the synchronization network.
The node clock in the
synchronization network obtains
the parent-node clock information
by reading the SSM, and performs
R-W related operationsR-Won the clock of
1 1local node, such as tracing and
changeover. Meanwhile the
synchronization message of local
node is sent to the subordinate
node.
 Result MODIND SubNetwork MEID manageId RUDevice

Modification ManagedElement Logice ID of RRU

SubNetwork ID RU board
Result Indication ID Managed

long:
S:Success A,D,M long:[0..999999] long:[0..268435455] string
[0..4294967295]
F:Fail

Describes the RU
resource. It needs to be Format: RackNo
A:Add, D:Delete, unique in configured on RRU RRU:51..201,
unique in OMMB.
M:Modify, P:Pass subnetwork rack or RSU rack. RSU:2..50
Default value is eg:51
RackNo of RRUDevice.

Primary Key Primary Key Primary Key Primary Key

a 24 1084 51 51
a 24 1084 52 52
a 24 1084 53 53
R8882-GUL8512
R8882-GUL1912
R8882 S9000(B)
R8882 S2100(B)
R8880A-U1712
R8881 S9000(B8A)
RUType
R8881 S9000(B8B) radioMode functionMode
The value is related with RRUType, can
R8881 S9000(B8C)
refer to a physical resource model
Type of RRU
R8881 S2100(B8A)
radioMode FunctionMode
definition document.
Name of RRU
R8881 S2100(B8B)
0:GSM Single Mode,
R8881 S2100(B6A)
0:GSM/LTE FDD Mixed Mode(ignore
R8881 S2100(B6B)
string sequence<long,8> long
the radio mode of PA),
R8882 S1900(B)
1:UMTS Single Mode,
TTR-G902
2:GSM Single Mode,
TTR-G182 Format of multimode, eg: 4;32
5:LTE-FDD Single-carrier,
TTR-G904 0:ALL{ALL},
256:UMTS Single Mode,
TTR-G184 1:UMTS{UMTS},
1280:LTE-FDD Single Mode,
R8882-S9000C 2:GSM{GSM},
1281:LTEFDD Two-carrier,
R8882-S1800C 4:TD-SCDMA{TD-SCDMA},
1282:TDD-FDD Share Fiber,
R8881 S1800(B8A) 8:CDMA{CDMA},
100663297:TD-LTE Single Mode,
R8881 S1800(B8B) 16:LTE FDD{LTE FDD},
452984833:LTE-IR,
R8881 S1800(B8C) 32:TD-LTE{LTE TDD}
50331652:GBRS,
R8882 S1800(B)
R-W-I R-W-I 50331653:TD-SCDMA R-W IR,
R8881 S2100(B8C)
R8882 GUL9018D(B6B) 2 24:GSM/UMTS
2 Mixed Mode,
R8881 S8500(B8B)
26:GSM/LTE FDD Mixed Mode
R8881 S8500(B8C)
R8882 GUL9018D(B6B) 2 2
31:UMTS/LTE FDD(S) Mixed Mode,
R8881 S1700(B8B)
R8882 GUL9018D(B6B)
R8881 S1700(B8C)
2 2
6144:GSM/UMTS Mixed Mode 4G+1U,
6145:GSM/UMTS Mixed Mode 2G+2U,
R8881 S1900(B8B)
0:common
R8881 S1900(B8C)
R8882 S8500(B6B)
R8882 S8500(B6A)
R8882 S1900(B6B)
R8882 S1900(B5A)
R8882 S9000(C6B)
R8882 S1800(C6B)
R8882-GUL9018D
R8884 M1826(AFA)
RSU40-U214
RSU40-U216
RSU40-U176
RSU60-GU906
RSU60-GU186
RSU60-GU908
RSU60-GU188
RSU60E-GU858
RSU60E-GU908
RSU60E-GU188
RSU60E-GU198
RSU82-GUL9016
RSU82-GUL1816
RSU82-GUL8516
RSU82-GUL1916
RSU82-U2112
RSU82 S9000(B8A)
RSU82 S2100(B6A)
RSU40-U218
RSU02-G902
RSU02-G182
RSU02-G904
RSU02-G184
RSU82-GUL9018D
RSU82 S1800(B8A)
RSU40-U178
RSU82 S2100(B8A)
RSU82 S8500(B8A)
RSU82 S1900(B6B)
RSU82 S1900(B6A)
RSU82 S1800(B8B)
RSU82 S8500(B8B)
RSU82 S1800(B8C)
 connectModeWithUpRack diversityMode rruGnssCableLength

Uplink connection mode of the

Diversity receiving mode RRU GNSS cable length
FiberDeviceSet
long
long 0:Normal diversity receiving, long:[0..8000] step:1 unit:m
1:Cross diversity reception
It is to configure the diversity It can be configured when RU is
receiving mode of RU. 'Cross R8964T S2600 and the clock type is
0:single up-link optical line, diversity reception' indicates the RRU inner GNSS.
1:double master&slave optical signals received in two receiving Indicate the feeder length from the
lines, channels are mutually GNSS antenna to the receiver. This
2:multiple load-sharing optical main/diversity set. (Dual- feeder is used to improve the clock
lines transmitting RU are connected with precision. It should be set based on
and only with two the on-site survey. It can only be set
receiving/transmitting antennas) on at most three RRUs.
R-W R-W R-W
0 0
0 0
0 0
 Result MODIND SubNetwork MEID FiberDevice

Modification
SubNetwork ID ManagedElement ID Optical Port Device
Result Indication
S:Success M long:[0..999999] long:[0..4294967295] string
F:Fail

Format:RackNo, ShelfNo, SlotNo

M:Modify, P:Pass unique in OMMB. unique in subnetwork
eg:1,1,3

Primary Key Primary Key Primary Key

24 1084 1,1,3
24 1084 1,1,3
24 1084 1,1,3
24 1084 1,1,3
24 1084 1,1,3
24 1084 1,1,3
24 1084 51,1,1
24 1084 51,1,1
24 1084 52,1,1
24 1084 52,1,1
24 1084 53,1,1
24 1084 53,1,1
 port opticalModuleType protocolType

Connected board TheProtocol

protocoltype
typeof
use by themodule
optical
FS Optical Module Type optical
port No. module.
{FiberDevice is not RRU}
long:[0..5] If the fiber device oflong
RRU, default 255.
0:PHY CPRI, long
1:1.25G{1.25G},
1:PHY LTE IR,
2:2.5G{2.5G},
2:PHY OBSAI,
3:3G{3G},
The physical port 3:PHY OBRI,
4:4G{4G},
number. 4:PHY GBRS,
6:6G{6G},
5:PHY TD-SCDMAIR,
10:10G{10G},
{FiberDevice is RRU}
Primary Key 255:Self adaptive (ifR-WFiberDevice is RRU,
10:APP ZTE, R-W
the value is valid)
0 1 0
11:APP LTE IR,
1 1 12:APP
0 TD-SCDMAIR,
13:APP OBRI
2 1 0
3 1 0
4 1 0
5 1 0
1 255 10
2 255 10
1 255 10
2 255 10
1 255 10
2 255 10
 Result MODIND SubNetwork MEID RUDevice port

Modification
SubNetwork ID ManagedElement ID RU board Port number
Result Indication
S:Success M long:[0..999999] long:[0..4294967295] string long:
F:Fail

Format: RackNo
M:Modify, RRU:51..201, Identification of the
unique in OMMB. unique in subnetwork
P:Pass RSU:2..50 antenna entity.
eg:51

Primary Key Primary Key Primary Key Primary Key

m 24 1084 51 1
m 24 1084 51 4
m 24 1084 52 1
m 24 1084 52 4
m 24 1084 53 1
m 24 1084 53 4
716MHz)Tx(734MHz-746MHz)},
20:Rx(832MHz-862MHz)Tx(791MHz-821MHz){Rx(832MHz-
862MHz)Tx(791MHz-821MHz)},
21:Rx(1447.9MHz-1462.9MHz)Tx(1495.9MHz-1510.9MHz){Rx(1447.9MHz-
1462.9MHz)Tx(1495.9MHz-1510.9MHz)},
22:Rx(3410MHz-3490MHz)Tx(3510MHz-3590MHz){Rx(3410MHz-
3490MHz)Tx(3510MHz-3590MHz)},suppBand radioMode
25:Rx(1850MHz-1915MHz)Tx(1930MHz-1995MHz){Rx(1850MHz-
1915MHz)Tx(1930MHz-1995MHz)},
Frequency Band ID
33:Rx(1900MHz-1920MHz)Tx(1900MHz-1920MHz){Rx(1900MHz- Radio standard
1920MHz)Tx(1900MHz-1920MHz)},
sequence<long,8> The value is related with RRUType,
sequence<long,8>
34:Rx(2010MHz-2025MHz)Tx(2010MHz-2025MHz){Rx(2010MHz-
can refer to a physical resource model
2025MHz)Tx(2010MHz-2025MHz)},
definition document.
35:Rx(1850MHz-1910MHz)Tx(1850MHz-1910MHz){Rx(1850MHz-
Multimode format: 4;32
1910MHz)Tx(1850MHz-1910MHz)},
0:ALL{ALL},
36:Rx(1930MHz-1990MHz)Tx(1930MHz-1990MHz){Rx(1930MHz-
1:UMTS{UMTS},
1990MHz)Tx(1930MHz-1990MHz)},
2:GSM{GSM},
37:Rx(1910MHz-1930MHz)Tx(1910MHz-1930MHz){Rx(1910MHz-
4:TD-SCDMA{TD-SCDMA},
1930MHz)Tx(1910MHz-1930MHz)},
8:CDMA{CDMA},
38:Rx(2570MHz-2620MHz)Tx(2570MHz-2620MHz){Rx(2570MHz-
Primary Key 16:LTE FDD{LTE FDD},
R-W
2620MHz)Tx(2570MHz-2620MHz)},
8 32:TD-LTE{LTE TDD}
2
39:Rx(1880MHz-1920MHz)Tx(1880MHz-1920MHz){Rx(1880MHz-
1920MHz)Tx(1880MHz-1920MHz)},
3 2
40:Rx(2300MHz-2400MHz)Tx(2300MHz-2400MHz){Rx(2300MHz-
8
2400MHz)Tx(2300MHz-2400MHz)},
2
3
41:Rx(2496MHz-2690MHz)Tx(2496MHz-2690MHz){Rx(2496MHz- 2
2690MHz)Tx(2496MHz-2690MHz)},
8 2
42:Rx(3400MHz-3600MHz)Tx(3400MHz-3600MHz){Rx(3400MHz-
3
3600MHz)Tx(3400MHz-3600MHz)}, 2
43:Rx(3500MHz-3700MHz)Tx(3500MHz-3700MHz){Rx(3500MHz-
3700MHz)Tx(3500MHz-3700MHz)},
63:Rx(806MHz-824MHz)Tx(851MHz-869MHz){Rx(806MHz-
824MHz)Tx(851MHz-869MHz)},
64:Rx(410MHz-460MHz)Tx(420MHz-470MHz){Rx(410MHz-
460MHz)Tx(420MHz-470MHz)},
67:Rx(894MHz-896MHz)Tx(849MHz-851MHz){Rx(894MHz-
896MHz)Tx(849MHz-851MHz)},
70:Rx(351MHz-356MHz)Tx(361MHz-366MHz){Rx(351MHz-
356MHz)Tx(361MHz-366MHz)},
100:Rx(776MHz-798MHz)Tx(746MHz-768MHz){Rx(776MHz-
798MHz)Tx(746MHz-768MHz)},
101:Rx(962MHz-977MHz)Tx(1037MHz-1057MHz){Rx(962MHz-
977MHz)TX(1037MHz-1057MHz)},
102:Rx(820MHz-849MHz)Tx(865MHz-894MHz){Rx(820MHz-
849MHz)Tx(865MHz-894MHz)},
103:Rx(1427.9MHz-1462.9MHz)Tx(1475.9MHz-1510.9MHz)
{Rx(1427.9MHz-1462.9MHz)Tx(1475.9MHz-1510.9MHz)},
104:Rx(703MHz-748MHz)Tx(758MHz-803MHz){Rx(703MHz-
748MHz)Tx(758MHz-803MHz)},
131:Rx(1427MHz-1525MHz)Tx(1427MHz-1525MHz){Rx(1427MHz-
1525MHz)Tx(1427MHz-1525MHz)},
132:Rx(1785MHz-1805MHz)Tx(1785MHz-1805MHz){Rx(1785MHz-
1805MHz)Tx(1785MHz-1805MHz)}
 It is a unique attribute of the GSM system.
Only the RU of 900M and 1800M have
dualMode sub-frequency bands.The
branchBandsub-frequency txCenterFreq
band within the working frequency band
supported by the PA device.
The allocation method
Dual-mode of PAmode
working resources
900M (BandSub-frequency
VIII) includesband
the following Tx central frequency point
in dual-mode. For example, 2G+2U
sub-frequency bands:
indicates the PA supports
long 2 GSM long:[1,2,3,255:Invalid] sequence<double,8>
1. Working frequency band: uplink
carriers and 2 UMTS cells.
890MHz to 915MHz, downlink 935MHz
1:4G+1U{4G+1U}, The central transmission frequency
to 960MHz.
2:2G+2U{2G+2U}, point of TxChannel. It is unavailable
2. Working frequency band: uplink
3:4G+1L{4G+1L}, for users. When it is set to 0, the
880MHz to 905MHz, downlink 925MHz
4:2G+1L{2G+1L}, calculation is executed automatically.
to 950MHz.
5:4G+2U{4G+2U}, In special cases when the parameter
3. Working frequency band: uplink
6:1C+1L{1C+1L}, needs to be configured, contact the
888MHz to 906MHz, downlink 935MHz
7:2C+1L{2C+1L}, ZTE local branch.
to 951MHz.
8:4C+1L{4C+1L},R-W R-W R-W
1800M (Band III) includes the following
9:2U+1L{2U+1L},
255 1sub-frequency bands: 0
254:TDS+TDL{TDS+TDL},
255
255:Invalid 21. Working frequency band: uplink 0
1710MHz to 1765MHz, downlink
255 11805MHz to 1860MHz. 0
255 22. Working frequency band: uplink 0
255 11730MHz to 1785MHz, downlink 0
1825MHz to 1880MHz.
255 2 0
 rxCenterFreq

Rx central frequency point

sequence<double,8>
The central receiving frequency
point of RxChannel. It is
unavailable for users. When it
is set to 0, the calculation is
executed automatically. In
special cases when the
parameter needs to be
configured, contact the ZTE
local branch. R-W
0
 Result MODIND SubNetwork MEID FCE Board

Modification
SubNetwork ID ManagedElement ID FCE Board
Result Indication
S:Success A,D long:[0..999999] long:[0..4294967295] string
F:Fail

FCE :RACK,SHELF,SLOT
A:Add, D:Delete unique in an OMMB unique in subnetwork
e.g: 2,1,7

Primary Key Primary Key Primary Key

 AuxCabnetNo

Controlled auxiliary cabinet No.

long

Fill out the attribute for the FCE in an

auxiliary cabinet, Can not be duplicate.
It is used in configuring FCE of the auxiliary
cabinet. It can not be filled if FCE is the
master cabinet or slave cabinet.
R
 RESULT MODIND SubNetwork MEID DryContact Board dryNo

Modification
SubNetwork ID ManagedElement ID Dry Contact Info Dry Contact No.
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295] string long:[0..255]
F:Fail The dry contact
port number on
which dry contact
Format:RackNo, alarms are
A:Add, D:Delete,
unique in OMMB. unique in subnetwork ShelfNo, ShelfNo configured.
M:Modify
eg:1,1,13 Supported by the
SA, FCE series
boards and radio
Primary Key Primary Key Primary Key frequencyR-Iboards.
a 24 1084 1,1,13 0
a 24 1084 1,1,13 1
a 24 1084 1,1,13 2
a 24 1084 1,1,13 3
a 24 1084 1,1,13 4
a 24 1084 1,1,13 5
a 24 1084 1,1,13 6
a 24 1084 1,1,13 7
 userLabel dryType outDryType outDryName

Dry contact description Dry Contact Type Output Dry Contact Status Output dry contact name

string:[0..128] long long string

User-defined information. Valid only if dryType is 1.

0:Input dry contact,
Cannot use invalid 0:Output low level, Valid only if dryType is 1.
1:Output dry contact
character &'"<> 1:Output high level

R-W R-I R-W R-W

Genset Running 0
OB Light Failure 0
Low Fuel 0
Door Open 0
Gem Active 0
Gem Failure 0
GLO High Temperature0
Grid Power Failure 0
 Drycontact 31,
198092581:Self Define
Drycontact 32,
198092582:Self Define
Drycontact 33,
198092583:Self Define
almStatus isSelfDefineAlm Drycontact 34,almNo
198092584:Self Define
Drycontact 35,
Alarm Status Is customized dry contact alarm 198092585:Self
Dry contactDefine
alarm name
Drycontact 36,
1:Yes, 198092586:Selflong
Define
long
0:No Drycontact 37,
198092587:Self Define
Valid only if dryType is 0.
Drycontact 38,
Valid only if dryType is 0. Indicates whether the dry contact
198092588:Self Define
0:Alarm when closed, alarm is customized. The
Drycontact 39,
1:Alarm when open customized dry contact needs to
198092589:Self Define
be imported by the user.
Drycontact 40,
R-W R-W 198092590:SelfR-W
Define
0 1 Drycontact
19809257641,
198092591:Self Define
0 1 198092577
Drycontact 42,
0 1 198092578
198092592:Self Define
0 1 Drycontact
19809257943,
198092593:Self Define
0 1 198092580
Drycontact 44,
0 1 198092581
198092594:Self Define
0 1 Drycontact
19809258245,
198092595:Self Define
0 1 198092583
Drycontact 46,
198092596:Self Define
Drycontact 47,
198092597:Self Define
Drycontact 48,
198092598:Self Define
Drycontact 49,
198092599:Self Define
Drycontact 50
isSelfDefineAlm==1 and GU
198096424:Self Define
Drycontact 51,
198096425:Self Define
Drycontact 52,
198096426:Self Define
Drycontact 53,
198096427:Self Define
Drycontact 54,
198096428:Self Define
Drycontact 55,
198096429:Self Define
Drycontact 56,
198096430:Self Define
Drycontact 57,
198096431:Self Define
Drycontact 58,
198096432:Self Define
Drycontact 59,
198096433:Self Define
Drycontact 60,
198096434:Self Define
Drycontact 61,
198096435:Self Define
Drycontact 62,
198096436:Self Define
Drycontact 63,
198096437:Self Define
Drycontact 64,
198096438:Self Define
Drycontact 65,
198096439:Self Define
Drycontact 66,
 Result MODIND SubNetwork MEID tmaNo

Modification
SubNetwork ID ManagedElement ID TMA number.
Indication
Result

A,D,M long:[0..999999] long:[0..4294967295] long:[1..96]

S:Success
F:Fail

A:Add, D:Delete,
unique in an OMMB unique in subnetwork TMA number.
M:Modify

Primary Key Primary Key Primary Key

 tmaType ulGain dlGain tmaNoise

Tower Top Amplifier

Tower Top Amplifier Tower Top Amplifier
Tower Top Amplifier type Downlink Power
Uplink Power Gain Noise Coefficient(0.1dB)
Gain(0.1db)
long
0:TMA,
3:A-TMA,
long long:[70..170, 255] long:[10..30]
4:A-COM,
5:ETMA,
A-TMA corresponds to the AISG
6:A-ETMA
tower mounted amplifier.
A-COM corresponds to the AISG
TMA: 70 to 150
combiner.
A-TMA: 44 to 100
TMA corresponds to common tower
A-COM: 0 to 14 INTEGER:70 to 170
mounted amplifier. INTEGER: 10 to 30
ETMA: 200 to 320 Invalid:255
ETMA corresponds to high-gain
A-ETMA: 92 to 100
common tower mounted amplifiers.
Invalid: 255
A-ETMA corresponds to the AISG
tower mounted amplifier
R-I with high R-W R R-W
gain.
 RESULT MODIND SubNetwork MEID Aisg Board

Modification
SubNetwork ID ManagedElement ID RU Board Info
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295] string
F:Fail

A:Add, D:Delete, Format: RackNo

unique in OMMB. unique in subnetwork
M:Modify eg:51

Primary Key Primary Key Primary Key

 uniqueId devType vendorCode aisgVersion

Device serial number Device type Vendor code AISG version

string:[1..32] long string:[1..128] long

1:RETC,
The entered vendor code
17:MULTI_RET,
according to actual
3:ATMA,
situation when the
90:NOTCH_FILTER,
Unique serial number for reported device type is 1:1.1,
2:MULTI_TMA,
device. scanned, or when the 2:2.0
241:ACOM,
device type is actively
226:AETMA,
configured by
209:NSNRET,
LMT/OMCB.
210:LGPTMA

R-I R-I R-I R-I

 multiAntNo userLabel fatherPort selfPort

Customized
Sub-unit No. Superior channel Local channel
descriptive filed
long:[1..4],255 string:[0..32] long:[0..12] long:[0..12]

The AISG1.1 and AISG2.0

The superior channel is The local channel is
Single RET devices are invalid.
used for SDTMA device used for SDTMA
For other AISG2.0 devices, each Customized
of NSN private device of NSN private
sub-unit number corresponds to information.
protocol. The value for protocol. The value
an AISG device that can be
other devices is 0. for other devices is 0.
controlled independently.

R-I R-W R-I R-I

 antNo tmaNo

Connected antenna Connected TMA device

long long

Indicates antEntityNo.
INTEGER: 1 to 96
If GU or LTE FDD, existed in
RfCable sheet.
Existed in Tma sheet.
If TDS or TDL, existed in
Indicates tmaNo.
IrAntGroup sheet.

R R
 RESULT MODIND SubNetwork MEID PowerOutlet Board

Modification
SubNetwork ID ManagedElement ID PowerOutletBoard Info
Result Indication

S:Success A,D,M long:[0..999999] long:[0..4294967295] string

F:Fail

Format:RackNo, ShelfNo,
A:Add, D:Delete,
unique in OMMB. unique in subnetwork ShelfNo, eg:1,1,5
M:Modify
Only TAM or RU support.

Primary Key Primary Key Primary Key

 switchStatus voltage port currentValue

Switch status Voltage Port ID Working current value

long:[0..2] long:[0..1,4294967295] long:[0..5] long Unit:mA.

0:Close,
1: AISG RS485,
0:140{140},
2: NSBT RS485 If port is configured, the
1:220{220},
Configure switch for Power outlet port value can be configured.
4294967295:Invalid
AISG/NSBT and for RS485 number. Indicates the working
The voltage of AISG
to select the AISG or NSBT current value of the port.
and NSBT.
channel. The switch is not
available for the TAM board.

R-W R-W R R-W-I

 almDetectMode lowerLimitPercent upperLimitPercent portSwitchStatus

Under current alarm Over current alarm

Alarm detection mode Switch status
threshold percent threshold percent
long:[0..1] long:[0..1]
0:currentDetect, long:[20..80,100] long:[100,120..180] 0:Close,
1:pulsewidthDetect 1:Open

If port is configured, the

If port is configured, the
value can be configured.
If port is configured, the value value can be configured.
When the actual current of If port is configured, the value
can be configured. When the actual current of
the TAM board power can be configured.
The alarm is reported when the the TAM board power
supply channel is less than Configure the switch status of
current of the port is abnormal. supply channel is greater
Working Current whether to enable current
Configure this parameter for the than Working Current
Value*local value/100, control.
detection mode of output current Value*local value/100, over
under current alarm is
current alarm is reported.
reported.
R-W-I R-W R-W R-W
 RESULT MODIND SubNetwork MEID refSdrDeviceGroup

Modification
SubNetwork ID ManagedElement ID Connected Board
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295] string
F:Fail
Format:RackNo, ShelfNo, ShelfNo
eg:1,1,13
A:Add, D:Delete,
unique in OMMB. unique in subnetwork Indicates the board for BBU to connect
M:Modify
with the embedded power device (SA/
SE/RU).
Primary Key Primary Key Primary Key
a 24 1084 1,1,13
 dataProcessMode powerType

Data processing mode Power Type

0:ZXDU58 B900,
1:ZXDU58 B121,
long 2:ZXDU68long B201,
3:ZXDU150,
4:ZXDU45,
5:ZXDU75,
0:Transparent transmission, 6:ZXDU58 B121(V4.5),
1:Bas station parse 7:ZXDU68 B201(V5.0),
8:ZXDU68 W301,
9:ZXDU68 S301,
R-W-I 10:ZXDU58 B121(V2.2),
R-W-I
1 8 11:ZXDU68
B201(V5.0R99M03),
100:Shelter JZ9
 Result MODIND SubNetwork MEID

Modification
SubNetwork ID ManagedElement ID
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295]
F:Fail

A:Add, D:Delete,
unique in OMMB. unique in subnetwork
M:Modify, P:Pass

Primary Key Primary Key

a 24 1084
A 24 1084
A 24 1084
 ref1FiberDevice ref2FiberDevice

Optical port of next hop in

Optical port of previous hop in topology structure
topology structure
string string

Format:(RackNo, ShelfNo, ShelfNo):Port Format: RackNo:Port

If BPL,the value of Port:0,1,2, eg:(1,1,3):1 The value of Port:1,2
If RU, the value of Port:1,2, eg:(51,1,1):1 eg:51:1

R-W-I Primary Key

(1,1,3):0 51:1
(1,1,3):1 52:1
(1,1,3):2 53:1
 Result MODIND SubNetwork MEID refRfDevice

Modification
SubNetwork ID ManagedElement ID RU Port Info
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295] string
F:Fail

Format: RackNo:Port
A:Add, D:Delete,
unique in an OMMB unique in subnetwork The value of Port:1,2
M:Modify, P:Pass
eg:51:1

Primary Key Primary Key R

a 24 1084 53:2
a 24 1084 53:1
a 24 1084 51:4
a 24 1084 52:4
a 24 1084 53:3
a 24 1084 51:2
a 24 1084 53:4
a 24 1084 51:1
a 24 1084 51:3
a 24 1084 52:1
a 24 1084 52:2
a 24 1084 52:3
 antEntityNo retDeviceType refTma

Antenna entity number RET device type TMA No.

long:[1..65535] long long:[1..96]

If antEntityNo is configed, the value is valid.

0:Non-RET,
Antenna entity number. 1:Uni-antenna RET,
If TDS or TDL, IrAntGroup 2:Uni-direction TMA, TMA number.
create antEntity, so the value can 3:Continuous power antenna system, The value is "tmaNo"
refer the "antEntityNo" in 4:Bi-direction TMA, of the Tma sheet.
"IrAntGroup" sheet. 5:LNA,
17:Multi-antenna RET.
RET device type connected with the antenna entity.

R R R
10 0
9 0
4 0
8 0
11 0
2 0
12 0
1 0
3 0
5 0
6 0
7 0
 dlAttenuation ulAttenuation

Downlink attenuation Uplink attenuation

double:[0.0..8.0] double:[0.0..8.0]
step:0.1 unit:dB step:0.1 unit:dB

Uplink attenuation of the RF

cable. When the RF cable is
used to connect the remote
Downlink attenuation
unit to the tower mounted
of the RF cable.
amplifier, the default value is
0.5dB. In other cases, the
default value is 0dB.

R-W R-W
0
0
0
0
0
0
0
0
0
0
0
0
 Result MODIND SubNetwork MEID ref1SdrDeviceGroup

Modification
SubNetwork ID ManagedElement ID Connected main RU
Result Indication
S:Success A,D,M long:[0..999999] long:[0..4294967295] string
F:Fail

A:Add, D:Delete, Format: RackNo

unique in an OMMB unique in subnetwork
M:Modify eg:51

Primary Key Primary Key Primary Key

 ref2SdrDeviceGroup ulAttenuation

Connected extend RU Uplink attenuation

string double[0..8]

Format: RackNo Uplink attenuation of the RF

eg:51 cable. The default value is 0dB.

R-I R-W
 Result MODIND SubNetwork MEID

Modification Indication SubNetwork ID ManagedElement ID

Result
S:Success A,M,D long:[0..999999] long:[0..4294967295]
F:Fail

A:Add, M:Modify,
unique in OMMB. unique in subnetwork
D:Delete,P:Pass

Primary Key Primary Key

a 24 1084
 ATMADDR TRANSMISSION_TYPE TRANSMISSION_MEDIUM

ATM Address Transmission Type Transmission Medium

sequence<long,20>
eg: string string
0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;
If GU, it must be filled.
0;0
If GU, it must be filled. FE
IP address of ATM, used in
IP E1
establishing the public transmission
ATM T1
channel in a cell. This address is
ATM+IP FE+E1
planned by the user. It should be
FE+T1
referred when the opposite-end
configuration isR-W
performed. R R
0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;IP FE
 ATMConfigType

ATM Configure Type

string

GU used.
Normal
HighLoad
Default：Normal

R
 RESULT MODIND SubNetwork MEID phyLayerPortNo

Modify
SubNetwork ID ManagedElement ID Physical Layer Port No.
Result Indication

A,D,M long:[0..999999] long:[0..4294967295] long:[0..17]

S:Success
F:Fail
Physical layer port number.
It is used to uniquelly
A:Add, identify the physical layer
D:Delete, resource.
unique in OMMB. unique in subnetwork
M:Modify,
P:Pass

Primary Key Primary Key Primary Key

a 24 1084 0
 connectObject refGeDevice operatingMode

Connection Object Used Ethernet Operating Mode

0:Electrical port self-adaptive,

1:Electrical port 10Mbps FDT,
2:Electrical port 100Mbps FDT,
0:RNC/BSC/CN/MME,
4:Optical port 100Mbps FDT,
1:SDR, string
3:Optical port 1000Mbps FDT,
2:Third-party
5:Optical port 10000Mbps FDT,
6:Optical port 1000Mbps self-
Opposite network element adaptive
connected by the object. In
the case of base station Used GeDevice,only for IP. It can be configured when using
cascading, set this property The board with GeDevice:CC,CCC.
refGeDevice'.
of upper-level base station Format:ShelfNo:Port
Ethernet working mode, matching
to be "SDR". If its value is Port:0,1
that at the opposite end. The rate
set as a third-party device, it eg:1:0
mode configuration depends on
indicates that the base
whether it is supported by the
station provides the data
Ethernet cable.
transmission channel for the
third-party device
R-I in R R-W
ATM+FE cascading cases. 1:0
0 2
 egressPeakBitRate refE1Device

Transmitting Bandwidth Used E1

{operatingMode==0}[100..1000000] step 100,

{operatingMode==1}[100..10000] step 100,
{operatingMode==2}[100..100000] step 100,
string
{operatingMode==3}[100..1000000] step 100,
{operatingMode==4}[100..100000] step 100,
{operatingMode==5}[100..10000000] step 100

E1 bearer used at the port. It is used in

ATM transmission mode or IP over PPP
It can be configured when using refGeDevice'. transmission mode.
Transmission bandwidth in the Ethernet The board with E1Device:SA,SE.
transmission mode. Format:ShelfNo:Port
Port:0..7
eg:13:0

R-W R
100000
 refT1Device refStm1Device codeType

Used T1 Used STM-1 Code Type

0:Branch Mode,
string string
1:TimeSlot Mode

T1 bearer used at the port. It is used in

ATM transmission mode or IP over PPP The configuration of transmission
transmission mode. media. It is used in ATM transmission
The board with T1Device:SA,SE. It can be configured when
mode.
Format:ShelfNo:Port using STM-1 port'.
The board with T1Device:NIS,NIS1.
Port:0..7 Format:ShelfNo:Port
eg:13:0

R R R-W
 RESULT MODIND SubNetwork MEID ethernetLinkNo

Modify Indication SubNetwork ID ManagedElement ID Ethernet link number

Result
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..4]
F:Fail
Ethernet link number. One
Ethernet physical port
A:Add, D:Delete, corresponds to one link.
unique in OMMB. unique in subnetwork
M:Modify, P:Pass

Primary Key Primary Key Primary Key

a 24 1084 0
 mtu vlanMembership refPhyLayerPort

Connection Object VLAN ID Used Physical Layer Port

Default:1500
long:[256..1800] Byte sequence<long,30> long:[0..17]
It represents the maximum number of
transmitted bytes of the packet of each
Ethernet link layer. The larger it is, the
Format:VALN;VLAN, The value is
higher the bandwidth usage is. However, it
VALN:long:[1..4094] "phyLayerPortNo" of the
might cause the end-to-end transmission
eg:1;2 PhyLayerPort sheet.
delay to increase. You can adjust it
according to the actual condition to avoid
the data packet being segmented in
R-W R-W R-W-I
transmission.
1500 698 0
 RESULT MODIND SubNetwork MEID hdlcNo
Result Modify Indication SubNetwork ID ManagedElement ID HDLC link number
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..16]
F:Fail

HDLC link number.

A:Add, D:Delete,
unique in an OMMB unique in subnetwork The range is
M:Modify
customized by the user.

Primary Key Primary Key R-I

 refPhyLayerPort timeSlotBitMap
Used Physical Layer Port Time slot bit mapping
long:[0..17] string
E1 or T1 time slot used by TC. A total
of 32 bit, each bit represents a time slot.
only fill in the time slots used,
expressed with a number.
The value is eg1: 8-15, from 7 to 15 time slot to be
"phyLayerPortNo" of the used.
PhyLayerPort sheet. eg2: 2-5,7-7 from 2 to 5 and 7 time slot
to be used.
Default value: 2-32

R-I R-W
 RESULT MODIND SubNetwork MEID

Modify Indication SubNetwork ID ManagedElement ID

Result
S:Success A,D,M long:[0..999999] long:[0..4294967295]
F:Fail

A:Add, D:Delete, M:Modify unique in an OMMB unique in subnetwork

Primary Key Primary Key

 pppLinkNo localIp protocolType

PPP link No. Base station IP PPP encapsulation type

long:[0..15] String long

IP address of the base station.
It is used for signaling and
PPP link number. The range is service data transmission in 0:PPP,
customized by the user. the IP network. 0.0.0.0 1:ML-PPP
indicates obtaining the local
IP address by negotiating with
Primary Key NE on the opposite
R-W-I end. R-I
 refHdlc mpCode mpClass ipCompress

Whether support IP
Used HDLC channel PPP encapsulation type MP priority
compression
sequence<long,16> long long long
Indicates the number of
Sequence format of MP supported priorities when
Used HDLC No header ML-MC PPP is supported 1:Yes,
e.g 1,2,4 2:Long sequence, (When MC is supported, two 0:No
6:Short sequence bits in the frame format are default:0
used to represent the
R-W-I R-W priority. R-W R-W-I
 isUsedToFECascade isCDMA

Whether used for FE

Used for CDMA or not
cascading
long long

1:Yes,
1:Yes, 0:No
0:No Indicates whether the PPP link is
default:0 used for CDMA. The value is
valid if CDMA.
R-W-I R
 RESULT MODIND SubNetwork MEID ipNo

IP parameter link
Modify Indication SubNetwork ID ManagedElement ID
Result number
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..19]
F:Fail

IP configuration ID.
A:Add, D:Delete,
unique in OMMB. unique in subnetwork You can set it within
M:Modify, P:Pass
the value range.

Primary Key Primary Key Primary Key

a 24 1084 0
IP addressipAddr
of the base gatewayIp networkMask prefixLength refEthernetLink
station. When the ethernet Gateway.When
link is used, it can be the ethernet link
IP Address
configured. Gateway
When the PPP is used, it canIPbe Network Mask Prefix length Used Ethernet link
link is used, you cannot configured. It
string[0..127]
configure the IP address canstring[0..127]
be IPv4 string[0..127] long:[1..128] long:[0..4]
information. It can be IPv4 address or IPv6 Prefix length The value is
address or IPv6 address, address, the IPv4 configuration. Only IPv6 "ethernetLinkNo" of
the IPv4 address format is address format is Subnet mask. Only address can be the EthernetLink
dotted decimal notation, dotted decimal IPv4 address can be configured. sheet.
i.e. 10.0.0.1, IPv6 address notation, i.e. configured. This parameter is refEthernetLink and
is colon hexadecimal 10.0.0.1, IPv6 unconfigurable in PPP refPppLink are
notation, i.e. address is colon mode. mutually exclusive.
R-W R-W R-W R-W R-W
2011:0db8:85a3:0000:1319 hexadecimal
10.216.88.198 10.216.88.222
:8a2e:0370:7366. It cannot notation, i.e. 255.255.255.224 16 0
be configured with the IP 2011:0db8:85a3:
address of the 192 network 0000:1319:8a2e:0
segment and the 200 370:7366.
network segment.
 refPppLink ipField vid radioMode

Used PPP link IP Domain VLAN ID Radio Standard

If the attribute is filled, the system
long:[0..15] long:[0..3,255(Invalid)] long:[1..4094] sequence<long,8>
will create the corresponding
"ServiceMap" record, need not fill
The value is UMTS need fill.
"ServiceMap" sheet.
"pppLinkNo" of the Ppp The information of the
It must be same multimode format, eg: 4;32
sheet. domain which IP address
as a VLAN in 1:UMTS,
refEthernetLink and belongs to. 255 indicates
refEthernetLink. 2:GSM,
refPppLink are mutually that it does not belong to
4:TD-SCDMA,
exclusive. any domain.
8:CDMA,
R R-W R-W R
16:LTE FDD,
255 698 32:TD-LTE
 RESULT MODIND SubNetwork MEID staticRouteNo

Modify Indication SubNetwork ID ManagedElement ID Static routing number

Result
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..99]
F:Fail

The unique ID of static

A:Add, D:Delete,
unique in OMMB. unique in subnetwork routing. It cannot be
M:Modify, P:Pass
duplicated.

Primary Key Primary Key Primary Key

 ipAddress nextHopIpAddr prefixLength

IpAddress Destination IP address Prefix length

string[0..127]
The string[0..127]
destination network address of The gateway address configuration long:[1..128]
static routing. of next hop.
It can be IPv4 or IPv6 address. The It can be IPv4 or IPv6 address. The
IPv4 format is decimal separated IPv4 format is decimal separated by The prefix length
by dots, such as 10.0.0.1. The IPv6 dots, such as 10.0.0.1. The IPv6 configuration. Configured
address is hexadecimal separated address is hexadecimal separated by only for IPv6 addresses.
by colon, such as colon, such as
2011:0db8:85a3:0000:1319:8a2e:0 2011:0db8:85a3:0000:1319:8a2e:03
R-W-I R-W-I R-W
370:7366. 70:7366.
 routeDistance networkMask vid refEthernetLink

Used Ethernet Link

Routing distance Network mask VLAN ID
No.
long:[1..254] string[0..127] long:[1..4094] long:[0..4]

The value is
The routing distance It must be same as a
The destination network "ethernetLinkNo" of
configuration. Configured only certain VLAN in
mask of static routing. the EthernetLink
for IPv6 addresses. refEthernetLink.
sheet.

R-W R-W-I R-W R-I

 Result MODIND SubNetwork MEID groupNo

Bandwidth resource group

Modify Indication SubNetwork ID ManagedElement ID
Result number
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..15]
F:Fail
Specify the bandwidth
resource group number, which
A:Add, D:Delete, must be unique in the same
unique in OMMB. unique in subnetwork
M:Modify,P:Pass bearer mode. In the Ethernet
bearer mode, the number can
be set to 0-7.
Primary Key Primary Key Primary Key
 refEthernetLink egressMBR resourceNoList weightList

Used Ethernet Link Maximum bandwidth of

Bandwidth resource number Transmission bandwidth weight
No. egress
long:[100..1000000] step
long:[0..4] sequence<long:[1..7], 24> sequence<long:[0..100], 24>
100
Configure transmission bandwidth
Specify bandwidth resource
The value is weight. Unit:%.
Indicate maximum available number.
"ethernetLinkNo" of It is an array, array length is consistent
bandwidth of egress. Format:resourceNo;resourceN
the EthernetLink with resourceNoList.
unit:kbps o;…
sheet. Format:weight;weight;…
eg:1;2
eg:0;1
R R-W R-I R-W-I
 isCDMA

Whether used for CDMA or not

long

1:Yes,
0:No
Indicate whether the bandwidth
resource is used for CDMA. The
value is valid if CDMA.

R
 Result MODIND SubNetwork MEID sctpNo

Result Modify Indication SubNetwork ID ManagedElement ID SCTP link number

S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..47]
F:Fail

SCTP link number.

A:Add, D:Delete, You can set it
unique in OMMB. unique in subnetwork
M:Modify, P:Pass within the value
range.

Primary Key Primary Key Primary Key

a 24 1084 0
 localPort refIpLayerConfig remotePort remoteAddr

Local port number Used IP Layer Configuration Remote port number Remote Address
Format:ip;ip;ip;ip,
long:[1..65535] sequence<long,4> long:[1..65535] eg:20.9.6.1;20.9.6.2
sequence<string,4>
Remote IP address of SCTP link.
It is the interconnection
The value is "ipNo" of
Remote port number of parameter. It can be IPv4 address
Local port number of SCTP IpLayerConfig sheet.
SCTP link. It is the or IPv6 address, the IPv4 address
link. It is the interconnection Configuration of IP layer that
interconnection format is dotted decimal
parameter. bears SCTP.
parameter. notation, i.e. 10.0.0.1, IPv6
Format:ipNo;ipNo, eg:1;2
address is colon hexadecimal
R-W-I R-W-I R-W-I notation, i.e. R-W-I
16 0 16 2011:0db8:85a3:0000:1319:8a2e
10.216.87.1
:0370:7366.
 radioMode inOutStreamNum dscp

Radio standard Number of in-and-out Streams DSCP

sequence<long,8>
1:UMTS{UMTS}, long:[2..6] long:[0..63]
2:GSM{GSM},
4:TD-SCDMA{TD- Number of incoming and outgoing
IP service model configuration.
SCDMA}, streams of SCTP association. A
Different models are chosen
8:CDMA{CDMA}, maximum of six incoming and
according to the actual scenario.
16:LTE FDD{LTE FDD}, outgoing streams can be configured.
Default:46
32:TD-LTE{LTE TDD} Default:2
multimode format, eg:
4;32 R-I R-W R-W
2 2 48
 refBandwidthResource

Used Bandwidth Resource

string

The value is "groupNo,resourceNo" of

the BandwidthResource sheet.
Format:groupNo,resourceNo, eg:0,1
Configure the bandwidth resource
used for SCTP.
R-W
 Result MODIND SubNetwork MEID itfUniBtsNo

OMC Interface Link

Modify Indication SubNetwork ID ManagedElement ID
Result number
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..15]
F:Fail

Itf-UniBTS channel
A:Add, D:Delete, number. You can set
unique in OMMB. unique in subnetwork
M:Modify,P:Pass it within the value
range.

Primary Key Primary Key Primary Key

a 24 1084 0
 itfUniBtsType refIpLayerConfig innerIp

Type of Operation and Maintenance Used IP Layer

Base station inner IP
Interface Configuration
0:IPINIP,
long string
2:Independent Networking
Itf-UniBTS packet encapsulation type, This attribute is valid when
IPINIP or IP (independent networking). itfUniBtsType is 0.
The value is "ipNo" of
The O&M packet can use IPINIP mode The inner IP address of base
IpLayerConfig sheet.
through RNC/BSC resolution station configured in the
Configuration of IP layer
transferring. IPINIP mode. It is used for
for itfUniBts.
The O&M packet can use the OMC and it is an
eg: 0
independent networking mode without interconnection parameter
RNC/BSC resolution.
R-W-I R-W-I (interconnected
R-Wwith OMC).
0 0 10.216.88.198
 gatewayIp omcServerIp omcServerIpPrefixLenth omcNetworkMask

OMC GateWay IP OMC Server IP OMC Prefix Length OMC Network Mask

string string long:[1..128] string

This attribute is valid when This attribute is valid
This attribute is valid when This attribute is valid itfUniBtsType is 2 and when itfUniBtsType is
itfUniBtsType is 0. when itfUniBtsType is 2. IPv6. 2.
IP address of the OMC Server IP address of the OMC Subnet mask of the OMC Subnet mask of the
GateWay configured in the IP server configured in the server configured in the OMC server configured
in IP networking mode. It can independent networking independent networking in the independent
be IPv4 address or IPv6 mode. It can be IPv4 mode. networking mode. It can
address. address or IPv6 address. Only IPv6 omcServerIP be IPv4 address or IPv6
R-W R-W address canR-W
be configured. address. R-W
10.216.88.222 129.200.0.5 16 0.0.0.0
 dscp refBandwidthResource

dscp Used Bandwidth Resource

The transmission
long:[0..63] string
quality priority of
O&M packet. It is
customized by the The value is
user. It is "groupNo,resourceNo" of the
recommended to set BandwidthResource sheet.
it to '46:EF service, Format:groupNo,resourceNo,
accelerated eg:0,1
forwarding,
minimum R-W
delay, and R-W
0
maximum flow'.
 Result MODIND SubNetwork MEID tcpNo

TCP connection
Modify Indication SubNetwork ID ManagedElement ID
Result number
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[0..1]
F:Fail

You can set it

A:Add, D:Delete,
unique in OMMB. unique in subnetwork within the value
M:Modify, P:Pass
range.

Primary Key Primary Key Primary Key

 refIpLayerConfig refBandwidthResource remoteAddr

Used IP Layer Configuration Used Bandwidth Resource Remote Address

long:[0..19] string string

eg:20.9.6.1
The value is "groupNo,resourceNo" of
The value is "ipNo" of Remote IP address of TCP link.
the BandwidthResource sheet.
IpLayerConfig sheet. It is the interconnection
Format:groupNo,resourceNo, eg:0,1
Configuration of IP layer that parameter. It is IPv4 address, the
Configure the bandwidth resource
bears TCP. IPv4 address format is dotted
used for TCP.
decimal notation, i.e. 10.0.0.1.
R-I R-W R-I
 qos

QoS

long:[7..8]

IP service model
configuration. You can
choose different model
according to the actual
scenario.
R-I
 Result MODIND SubNetwork MEID serviceMapNo

Modify Indication SubNetwork ID ManagedElement ID Object No. of Service Map

Result
S:Success A,D,M long:[0..999999] long:[0..4294967295] long:[1..32]
F:Fail

Service and DSCP mapping

No.
A:Add, D:Delete, If the "radioMode" attribute
unique in OMMB. unique in subnetwork
M:Modify,P:Pass of the "IpLayerConfig
"sheet is filled, need not fill
this sheet.

Primary Key Primary Key Primary Key

a 24 1084 1
 refIpLayerConfig fddServiceDscpMap tddServiceDscpMap

Used IP Layer
LTE FDD service and DSCP mapping LTE TDD service and DSCP mapping
Configuration
LTE FDD use. If fill the field, can not fill LTE TDD use. If fill the field, can not fill the
long thesequence<long:[0..63,
ServiceDscpMap of other radio mode.
255(invalid)], 64> ServiceDscpMap of other255(invalid)],
sequence<long:[0..63, radio mode. 64>
eg: eg:
0;1;2;3;4;5;6;7;8;9;10;11;12;13;14;15;16;17 0;1;2;3;4;5;6;7;8;9;10;11;12;13;14;15;16;17;
;18;19;20;21;22;23;24;25;26;27;28;29;30;31 18;19;20;21;22;23;24;25;26;27;28;29;30;31;
The value is "ipNo" of
;32;33;34;35;36;37;38;39;40;41;42;43;44;45 32;33;34;35;36;37;38;39;40;41;42;43;44;45;
IpLayerConfig sheet.
;46;47;48;49;50;51;52;53;54;55;56;57;58;59 46;47;48;49;50;51;52;53;54;55;56;57;58;59;
Configure the IP
;60;61;62;63 60;61;62;63
parameter of bearer
Mapping rule between LTE FDD service Mapping rule between TD-LTE service and
services.
and DSCP. It indicates with which QoS DSCP. It indicates with which QoS priority
priority the IP layer bears the corresponding the IP layer bears the corresponding service.
R-W-I service. If DSCP is set
R-Wto 255, it indicates If DSCP is set to 255, it indicates that this IP
R-W
0 that this IP layer does not bear the layer does not bear the corresponding
corresponding service. service.
 gsmServiceDscpMap umtsServiceDscpMap

GSM service DSCP mapping UMTS service and DSCP mapping

sequence<long:[0..63, 255(invalid)], 2> UMTS use. Ifsequence<long:[0..63, 255(invalid)],

fill the field, can not fill 10>
the ServiceDscpMap of
GSM use. If fill the field, can not fill the other radio mode.
ServiceDscpMap of other radio mode. Format:commonTransChanDscp;rrcConnDscp;r99ConverDscp;r9
Format:cs2GDscp;ps2GDscp 9StreamingDscp;r99InteractiveDscp;r99BackgroundDscp;hspaCo
default: 36;20 nverDscp;hspaStreamingDscp;hspaInteractiveDscp;hspaBackgrou
Mapping rule between GSM service and ndDscp.
DSCP. It indicates with which QoS priority default: 46;36;36;36;20;0;38;38;22;0
the IP layer bears the corresponding service. Mapping rule between UMTS service and DSCP. It indicates with
If DSCP is set to 255, it indicates that this IP which QoS priority the IP layer bears the corresponding service. If
layer does not bear the corresponding service. DSCP is set to 255, it indicates that this IP layer does not bear the
R-W corresponding service. R-W
36;20
 tdsServiceDscpMap refOperator

TD-SCDMA service and DSCP mapping Operator Name

sequence<long:[0..63,
TDS use. If fill the field, can not fill255(invalid)], 10>
the ServiceDscpMap of sequence<string,3>
other radio mode.
Format:commonTransChanDscp;rrcConnDscp;r99ConverDscp;r
99StreamingDscp;r99InteractiveDscp;r99BackgroundDscp;hspa The value is "operatorName" of
ConverDscp;hspaStreamingDscp;hspaInteractiveDscp;hspaBack Operator sheet.
groundDscp. Format:operatorName;operatorN
default: 46;36;36;36;20;0;38;38;22;0 ame
Mapping rule between TD-SCDMA service and DSCP. It eg:CMCC;CUCC
indicates with which QoS priority the IP layer bears the
corresponding service. If DSCP is set to 255, it indicates that this
R-W
IP layer does not bear the corresponding service. R
Telenor
 refBandwidthResource

Used Bandwidth Resource

string

The value is "groupNo,resourceNo" of the

BandwidthResource sheet.
Format:groupNo,resourceNo, eg:0,1
Configure the bandwidth resource of bearer
services. This parameter must be configured if the
bandwidth is configured.

R-W
 Result MODIND SubNetwork MEID antProfileNo
Object No. of antenna
Modify Indication SubNetwork ID ManagedElement ID
Result attribute
S:Success A,D,P long:[0..999999] long:[0..4294967295] long:[1..600]
F:Fail

Default has 23 data,

default value is from 1 to
20, 201, 202, 251, 351.
A:Add, D:Delete,
unique in OMMB. unique in subnetwork The new value is
P:Pass
recommended ​from 21 to
600, except for 201, 202,
251 and 351.

Primary Key Primary Key Primary Key

 antFactory antType antGain antGap

Antenna Factory Antenna Type Antenna Gain Antenna Gap

Intelligent antenna
long:[0..255] long:[0..255] long:[0..255] long:[0..65535]
vendor;
0: ZTE
1: GuoXin
2: HaiTian Intelligent antenna type;
3: GCI 0:smart antennas circular array Antenna interval(for line
Intelligent antenna
4: TTCOM 1:smart antennas liner array array) or semidiameter(for
gain(dBi)
5: COMBA 2:distributed antenna circle array)(mm)
6: MOBI 3:smart biploar anetennas
7: Tongyu
8: ANDREW
9: ShengLuR-I R-I R-I R-I
10:HongXin
 antUnitsNumber
Number of
Antenna Units

long:[1..8]

Quantity of
intelligent units

R-I
 Result MODIND SubNetwork MEID refSdrDeviceGroup

Modify Indication SubNetwork ID ManagedElement ID Connected RRU

Result
S:Success A,D,P long:[0..999999] long:[0..4294967295] string
F:Fail

Connected RRU,
A:Add, D:Delete,
unique in OMMB. unique in subnetwork Format:RackNo
P:Pass
eg:51

Primary Key Primary Key Primary Key

 irAntGroupNo refRfDevice

Ir Antenna Group No. Connected Tx Device

long:[1..8] sequence<string,8>

Tx device which connects to RF cable, which is the

Smart antennas:
radio frequency port of the RRU.
1. A IrAntGroup correspond to an AntEntity.
Format:rack:port&rack:port;rack:port&rack:port
2. an antEntity is configured an antprofile, "refRfDevice"
The value refer "irAntGroupNo".
is an array, array length is consistent with "number"
Rule:
attribute of "antprofile".
1. A "antEntity" corresponds to n
Distributed antenna:
"refRfDevice"(n>=1，consistent with the "number"
1. A IrAntGroup correspond to n AntEntity.(n>=1), an
attribute of "antprofile").
antEntity is configured an antprofile, "antEntity" is an
2. Multiple "antEntity" corresponds to "refRfDevice"
array, length according the real situation .
using ";" separation.
2. refRfDevice is an array, length using ";" separation is
3. An "antEntity" corresponds to multiple
consistent with the array length of "antEntity", length
"refRfDevice" using "&" separation.
using "&" separation is consistent with the "number"
rule 2, eg: 51:1;51:2;51:3;51:4
attribute of "antprofile".
rule 3, eg:51:1&51:2

Primary Key R-I

 antEntityNo

Antenna Entity No.

sequence<long,8>

Unique in NE.
The value refer
"irAntGroupNo".
Format:antEntityNo;antEntity
No;antEntityNo;antEntityNo
eg:1;2;3;4

R-I
 AntProfile

Used antProfileNo

sequence<long,8>
The value refer "irAntGroupNo". Format:antProfileNo;antProfileNo;antProfileNo;antProfileNo, eg:1;2;3;4.
The default value of antProfileNo, the value list is as follows:
1: vendor is ZTE;type is smart antennas liner array;number is 4; gain is 15dBi; period or distance is 65 mm;
2: vendor is ZTE;type is smart antennas liner array;number is 6; gain is 15dBi; period or distance is 65 mm;
3: vendor is ZTE;type is smart antennas liner array;number is 8; gain is 15dBi; period or distance is 65 mm;
4: vendor is ZTE;type is smart antennas liner array;number is 4; gain is 18dBi; period or distance is 65 mm;
5: vendor is ZTE;type is smart antennas liner array;number is 6; gain is 18dBi; period or distance is 65 mm;
6: vendor is ZTE;type is smart antennas liner array;number is 8; gain is 18dBi; period or distance is 65 mm;
7: vendor is ZTE;type is smart antennas liner array;number is 4; gain is 15dBi; period or distance is 75 mm;
8: vendor is ZTE;type is smart antennas liner array;number is 6; gain is 15dBi; period or distance is 75 mm;
9: vendor is ZTE;type is smart antennas liner array;number is 8; gain is 15dBi; period or distance is 75 mm;
10: vendor is ZTE;type is smart antennas liner array;number is 4; gain is 18dBi; period or distance is 75 mm;
11:vendor is ZTE;type is smart antennas liner array;number is 6; gain is 18dBi; period or distance is 75 mm;
12:vendor is ZTE;type is smart antennas liner array;number is 8; gain is 18dBi; period or distance is 75 mm;
13:vendor is ZTE;type is smart biploar anetennas;number is 8; gain is 15dBi; period or distance is 65 mm;
14:vendor is ZTE;type is smart biploar anetennas;number is 8; gain is 18dBi; period or distance is 65 mm;
15:vendor is ZTE;type is smart biploar anetennas;number is 8; gain is 15dBi; period or distance is 75 mm;
16:vendor is ZTE;type is smart biploar anetennas;number is 8; gain is 18dBi; period or distance is 75 mm;
R-I
 Result MODIND SubNetwork MEID

Result Modify Indication SubNetwork ID ManagedElement ID

S:Success A,D,M long:[0..999999] long:[0..4294967295]

F:Fail

A:Add, D:Delete, M:Modify, P:Pass unique in OMMB. unique in subnetwork

Primary Key Primary Key

 channelizedStm1No refPhyLayerPort timeSlot

IP Parameter Link No. Used PhyLayerPort Time Slot No.

long
long:[0..15] long:[0..17]
[255..255],[1..63]

IP configuration ID. You The transmission media used Time Slot No.
can set it within the value by physical layer port must be
range. STM-1.the value is equal to
PHYLAYERPORTNO
Primary Key R-I R-I
 Result MODIND SubNetwork MEID

Result Modify Indication SubNetwork ID ManagedElement ID

S:Success A,D,M long:[0..999999] long:[0..4294967295]
F:Fail

A:Add, D:Delete,
unique in OMMB. unique in subnetwork
M:Modify, P:Pass

Primary Key Primary Key

 atmLayerLinkNo refPhyLayerPort

AtmLayer Link No. Used ATM Port

long:[0..11] sequence<string,32>
AtmLayer link It is valid when ATM layer protocol is set as IMA, TC or
No.,especailly for IMA STM-1. The transmission media used by physical layer port
Group No., You can set it must be E1 or T1 when ATM layer protocol is IMA or TC.
within the value range. The transmission media used by physical layer port must be
STM-1 when ATM layer protocol is STM-1. Only one
physical layer port is used when ATM layer protocol is TC or
STM-1.the value format is
"PHYLAYERPORTNO;PHYLAYERPORTNO;PHYLAYE
RPORTNO",eg:1;2;3

Primary Key R-W

 refChannelizedStm1

Used Channlized STM-1

sequence<string,32>
It is valid when ATM layer protocol is set
as IMA or TC. Only one physical layer
port is used when ATM layer protocol is
TC.the value format is
"channelizedStm1No;channelizedStm1No
;channelizedStm1No",Eg:1;2;3