Scribd
Upload
270 views1 page

Loop PSC Testers

The document describes two electrical testing instruments: 1) The T1825 is a load/no load tester and volt drop tester that can test up to 100A circuit breakers. It measures loop and prospective short circuit current, and tests each phase separately on 3-phase systems. 2) The T418 is a multifunction instrument that measures RCD tripping time and current, global earth resistance, line and loop impedance, and phase rotation. It has 350 memory locations and permits checking RCDs manually and automatically. Both instruments have various measurement functions, technical specifications, included accessories, and physical characteristics like dimensions and weight.

Uploaded by

mnboth
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
270 views1 page

Loop PSC Testers

The document describes two electrical testing instruments: 1) The T1825 is a load/no load tester and volt drop tester that can test up to 100A circuit breakers. It measures loop and prospective short circuit current, and tests each phase separately on 3-phase systems. 2) The T418 is a multifunction instrument that measures RCD tripping time and current, global earth resistance, line and loop impedance, and phase rotation. It has 350 memory locations and permits checking RCDs manually and automatically. Both instruments have various measurement functions, technical specifications, included accessories, and physical characteristics like dimensions and weight.

Uploaded by

mnboth
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Instruments

Loop / PSC / Load

T1825 Loop/PSC/Load
Load/no load tester PSC (Prospective short circuit current) Volt drop test Microprocessor controlled Test up to 100A (6kA) circuit breakers Each phase tested separately on a 3 phase system
Technical Specification
Measuring :Loop :Psc 0 ~ 2000 0 ~ 6ka @230v (L-n) 12A (Load Voltage shown as @ 16A 0.01 (Loop) Electronic 1% (210 ~ 250V) 2% (0.05 ~ 50) 3% (500) 15% (above 500) 0 ~ 40C 85%

Operating Voltage (VAC) 50 ~275vac 50 or 60Hz TEST CURRENT Loop/PSC/Load Resolution (ohm) Thermal Protection Accuracy Voltages Accuracy Loop

Operating Temperature Humidity

Model Specification
Accessories Dimensions (mm) Power Source Weight Carry Case, Strap, Leads 170(L) x 165(W) x 92(H) 8 x 1.5V AA Batteries 970g
Meter Supplied With Certificate of Conformence

T418 Loop/PSC Global Earth Resistance and RCD


Loop impedance Line impedance A, AC and selective RCD tripping time A and AC RCD tripping current Global earth resistance (15mA) Short circuit/loop current calculation Phase rotation 350 Memory location

Functions
Measurement of real tripping current of RCDs Measurement of global earth resistance Measurement of contact voltage Measurement of fault/short circuit loop impedance Calculation and display of prospective short circuit current Phase sequence indication and voltage measurement 415V TT system only

SPEEDTEST T418, multifunction instrument for testing of RCDs, total earth resistance, line and fault impedance with calculation of prospective short circuit current and phase sequence indication, permits to check times both manually and automatically (making comparisons with the values provided by the standards in force) and tripping current of any kind of RCD general and selective type A and AC, measure earth resistance directly in the socket without causing RCD tripping, effect measurement of line and/or fault loop impedance (with and without tripping of any RCD installed upstream) and calculation of prospective short circuit current.
Technical Specification
Functions RCD Tripping time Range 10,30,100,300,500mA/1 999ms (1/2IN, IN) 10,30,100,300,500mA/1 200ms (2IN, RCD Type G) 10,30,100,300,500mA/1 250ms (5IN, RCD Type S) 10,30,100,300mA/0 50ms (5IN, RCD Type G) 10,30,100,300mA/0 160ms (5IN, RCD Type S) RCD Tripping current RCD Loop resistance Line/Loop Impedance (0,5 1,4) IN (RCD type AC) (0,5 2,0) IN (RCD type A) 0 2k/Itest = (1/2IN) 0,01 19,99 10,0 199,9 200 1999 (P - PE) Global Earth Resistance 0,01 9,99 RCD Tripping Phase Rotation Voltage 10,0 1999,9 200 1999 (P - PE) 0 415V Single - phase system Display: 123 Correct - 132 Incorrect 0 415V two - phase or three - phase system (5% reading + 5 Digit) 0,1V 0,5Hz (2% reading + 2 Digit) 1 (5% reading + 3 Digit) 0,01 0,1 1 (5% reading + 3 Digit) 0,01 0,1 1 10% Basic Accuracy

Meter Supplied With Calibration Certificate

Resolution

Optional Accessories: TOPVIEW - C2006 USB Cable and Software

(2% reading + 2 Digit) 1ms

0,1% IN

Model Specification
Optional Accessories Standard Accessories Software & serial cable (TOPVIEW) Test leads Carry case English instruction manual Calibration certificate ISO9000 Dimensions (mm) Power Source Weight 240(L) x 170(W) x 80(H) 6 x 1,5 AA Batteries 800g

25

You might also like