Datasheet: uni 880 Tab R
EN
EN
Slat Top Plastic Chain
Series uni 880 Type Tab R
P
Slat Top Plastic Chain
E L H
Side flexing chain
K Pitch: 38.1 mm (1.50 in)
Backflex radius:
STANDARD
TRAVEL 75.0 mm (3.00 in)
Permissible tensile strength:
POM material:
J G Q
2250 N (506 lbf)
W Standard shipping lengths:
boxes of 80 links
T
R = 3.048 m (10.0 ft)
E G H J K L P Q T
mm in mm in mm in mm in mm in mm in mm in mm in mm in
SIDE FLEXING
7.1 0.28 44.5 1.75 15.9 0.63 61.5 2.42 11.9 0.47 7.5 0.30 38.1 1.50 43.1 1.70 4.0 0.16
All dimensions are for chains in POM material.
Width (W) Weight Min. radius (R)
Material & color Pin material
mm in kg/m lb/ft mm in
K200 50.6 2.00 - - - - - -
K250 63.5 2.50 POM-LF BR SS304 0.8 0.54 200 7.87
K325 82.6 3.25 POM-LF BR POM-SLF DG SS304 1.0 0.67 200 7.87
PITCH 38.1 MM/1.50 IN
K450 114.3 4.50 POM-LF BR SS304 1.1 0.75 200 7.87
Non standard material and color: See uni Material and Color Overview.
Non standard pin material: See uni Material and Color Overview.
Accessories
Rubber Top
X Z X Y
Link Rubber
Width
material material
mm in mm in mm in
K325 POM-LF BR 05 I 60 2.36 10 0.39 2.5 0.10
Z
When ordering, please state the
required distance between the
Rubber Top.
Other Non Standard rubber profiles:
See uni Rubber Profile Overview. Y
Member of Ammega Group.
ammega.com
Datasheet: uni 880 Tab R
Sprocket
Max. ø bore
Min. ø bore
Dimension
Dimension
diameter
diameter
diameter
Molded Cast Iron
Overall
Molded PA6 LG
Pitch
No. of teeth
Hub
B
mm in mm in mm in mm in mm in mm in mm in
Z9 111.4 4.39 109.7 4.32 20.0 0.80 40.0 1.60 70.0 2.76 55.9 2.20 63.2 2.49
Z10 123.3 4.85 122.3 4.81 20.0 0.80 40.0 1.60 70.0 2.76 62.2 2.45 69.2 2.72
Z11 135.2 5.32 134.8 5.31 20.0 0.80 40.0 1.60 70.0 2.76 68.4 2.69 75.1 2.96
Z12 147.2 5.80 147.2 5.80 20.0 0.80 40.0 1.60 70.0 2.76 74.6 2.94 81.1 3.19
Z15 183.3 7.22 184.3 7.26 20.0 0.80 40.0 1.60 70.0 2.76 93.2 3.67 99.2 3.91
Two part sprocket
Max. ø bore
Min. ø bore
Dimension
Dimension
diameter
diameter
diameter
Overall
Molded PA6 LG
Pitch
No. of teeth
Hub
B
mm in mm in mm in mm in mm in mm in mm in
Z9 111.4 4.39 109.7 4.32 20.0 0.80 40.0 1.60 70.0 2.76 55.9 2.20 63.2 2.49
Z10 123.3 4.85 122.3 4.81 20.0 0.80 40.0 1.60 70.0 2.76 62.2 2.45 69.2 2.72
Z11 135.2 5.32 134.8 5.31 20.0 0.80 40.0 1.60 70.0 2.76 68.4 2.69 75.1 2.96
Z12 147.2 5.80 147.2 5.80 20.0 0.80 40.0 1.60 70.0 2.76 74.6 2.94 81.1 3.19
Non standard material and color:
Molded sprocket Cast iron sprocket Molded two part sprocket
See uni Material and Color Overview.
B Please ensure that sufficient size
shaft and keyway are chosen for
corresponding load.
A
uni 880 Tab R/2021.10.22
Other sprocket sizes are available upon request
Width of tooth: 15.8 mm/0.62 in
Width of sprocket: 42.3 mm/1.67 in
Width of cast iron sprocket: 41.3 mm/1.63 in
uni Retainer Rings: See uni Retainer Ring data sheet
uni Idler: See uni Idler data sheet
Expert advice and quality solutions Ammeraal Beltech Modular A/S
Fabrication & Service
Endless Woven Belts
Homogeneous Belts
for all your belting needs. Hjulmagervej 21
Engineered Belts
Synthetic Belts
Modular Belts
ammeraalbeltech.com DK-7100 Vejle
T +31 7572 3100
ammega.com
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above
stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to
general terms and conditions of sale and delivery, as applied by its operating companies.
Member of Ammega Group.
