www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.

in

ANNA UNIVERSITY, CHENNAI

AFFILIATED INSTITUTIONS

R - 2008
I SEMESTER CURRICULA AND SYLLABI
(Common to all B.E. / B.Tech Programmes except B.E. Marine Engineering)

SEMESTER I

SL. COURSE
COURSE TITLE L T P C
No. CODE

THEORY

1. HS2111 Technical English - I 3 1 0 4

2. MA2111 Mathematics - I 3 1 0 4

3. PH2111 Engineering Physics - I 3 0 0 3

4. CY2111 Engineering Chemistry - I 3 0 0 3

5. GE2111 Engineering Graphics 2 3 0 5

6. GE2112 Fundamentals of Computing and Programming 3 0 0 3

PRACTICAL

7. GE2115 Computer Practice Laboratory -I 0 0 3 2

8. GE2116 Engineering Practices Laboratory 0 0 3 2

9. * Physics & Chemistry Laboratory I 0 0 3 -

TOTAL : 26 CREDITS

* Laboratory classes on alternate weeks for Physics and Chemistry. The lab examinations
will be held only in the second semester (Including the first semester experiments also).

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

HS2111 TECHNICAL ENGLISH – I L T P C

3 1 0 4
AIM:
To encourage students to actively involve in participative learning of English and to help
them acquire Communication Skills.
OBJECTIVES:
1. To help students develop listening skills for academic and professional
purposes.
2. To help students acquire the ability to speak effectively in English in real-life
situations.
3. To inculcate reading habit and to develop effective reading skills.
4. To help students improve their active and passive vocabulary.
5. To familiarize students with different rhetorical functions of scientific English.
6. To enable students write letters and reports effectively in formal and business
situations.
UNIT I 12
General Vocabulary - changing words from one form to another - Adjectives,
comparative adjectives – Adverbs - Active and passive voice – Tenses - simple present,
present continuous - Adverb forms – Nouns – compound nouns - Skimming and
scanning - Listening and transfer of information – bar chart, flowchart - Paragraph
writing, description – Discussing as a group and making an oral report on the points
discussed, conversation techniques - convincing others.
Suggested activities:
1. Matching words & meanings - Using words in context – Making sentences.
2. Changing sentences from active to passive voice & vice versa.
3. Skimming, cloze exercises, exercises transferring information from text to graphic
form – bar charts, flow charts.
4. Writing descriptions using descriptive words & phrases, and technical
vocabulary.
5. Role play, conversation exercises, discussions, oral reporting exercises
Any other related relevant classroom activity.

UNIT II 12
Vocabulary – prefixes & suffixes – simple past tense - Spelling and punctuation – ‘wh’
Question forms - Scanning, inference - Listening & note-taking - Paragraph writing -
comparison and contrast - Creative thinking and speaking.

Suggested Activities:
1. a. Vocabulary actiivities using prefixes and suffixes.
b. Exercises using questions – asking & answering questions.
2. Scanning the text for specific information
3. Listening guided note-taking - Writing paragraphs using notes, giving
suitable headings and subheadings for paragraphs. Using expressions of
comparison and contrast.
4. Discussion activities and exploring creative ideas.
Any other related relevant classroom activity

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT III 12
Tenses - simple past, simple future and past perfect - Reading in Context -Listening &
note-taking – single line – Definitions – sequencing of sentences – instruction -
Persuasive speaking.
Suggested activities:
1. a. Providing appropriate context for the use of tenses
2. Listening and note-taking
3. (a) Writing sentence definitions, instructions
(b) Identifying the discourse links and sequencing jumbled sentences /
writing instructions.
4. Speaking exercises, discussions, role play exercises using explaining,
convincing and persuasive strategies
Any other related relevant classroom activity

UNIT IV 12
Modal verbs and Probability – Concord subject verb agreement – Correction of errors -
Cause and effect expressions – Extended Definition - Speaking about the future plans.
Suggested activities:
1. a. Making sentences using modal verbs to express probability
b. Gap filling using relevant grammatical form of words.
2. Writing extended definitions
3. Speaking - role play activities, discussions, extempore speaking exercises
speculating about the future.
4. Any other related relevant classroom activity
UNIT V 12
‘If’ conditionals – Gerunds - Intensive reading - Speaking – Presentation of problems &
solutions - Itinerary – planning for an industrial visit - Formal Letter writing – Letter to the
editor, invititation letter, accepting, declining letter and permission letter.
Suggested activities:
1. a) Sentence completion exercises using ‘If’ conditionals.
b) Gap filling exercises using gerunds and present participle forms
2. Reading comprehension exercises.
3. Role play, discussion, debating and speaking activities for stating, discussing
problems and suggesting solutions.
4. Planning a tour, Writing a travel itinerary. Writing letters to officials and to the
editor in formal/official contexts.
Any other related relevant classroom activity
TOTAL : 60 PERIODS

TEXT BOOK:
1. Department of Humanities & Social Sciences, Anna University, ‘English for
Engineers and Technologists’ Combined Edition (Volumes 1 & 2), Chennai: Orient
Longman Pvt. Ltd., 2006. Themes 1 – 4 (Resources, Energy, Computer, Transport)

REFERENCES:
1. Meenakshi Raman and Sangeeta Sharma, ‘Technical Communication English skills
for Engineers’, Oxford University Press, 2008.
2. Andrea, J. Rutherford, ‘Basic Communication Skills for Technology’, Second Edition,
Pearson Education, 2007.

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

EXTENSIVE READING:
1. A.P.J.Abdul Kalam with Arun Tiwari, ‘Wings of Fire’ An Autobiography, University
th
Press (India) Pvt. Ltd.,1999, 30 Impression 2007.
NOTE:
The book given under Extensive Reading is meant for inculcating the reading habit of
the students. They need not be used for testing purposes.

MA2111 MATHEMATICS – I L T P C
3 1 0 4

UNIT I MATRICES 12
Characteristic equation – Eigen values and eigen vectors of a real matrix – Properties –
Cayley-Hamilton theorem (excluding proof) – Orthogonal transformation of a symmetric
matrix to diagonal form – Quadratic form – Reduction of quadratic form to canonical form
by orthogonal transformation.

UNIT II THREE DIMENSIONAL ANALYTICAL GEOMETRY 12

Equation of a sphere – Plane section of a sphere – Tangent Plane – Equation of a cone
– Right circular cone – Equation of a cylinder – Right circular cylinder.

UNIT III DIFFERENTIAL CALCULUS 12

Curvature in Cartesian co-ordinates – Centre and radius of curvature – Circle of
curvature – Evolutes – Envelopes – Evolute as envelope of normals.

UNIT IV FUNCTIONS OF SEVERAL VARIABLES 12

Partial derivatives – Euler’s theorem for homogenous functions – Total derivatives –
Differentiation of implicit functions – Jacobians – Taylor’s expansion – Maxima and
Minima – Method of Lagrangian multipliers.

UNIT V MULTIPLE INTEGRALS 12

Double integration – Cartesian and polar coordinates – Change of order of integration –
Change of variables between Cartesian and polar coordinates – Triple integration in
Cartesian co-ordinates – Area as double integral – Volume as triple integral

TOTAL: 60 PERIODS
TEXT BOOK:
1. Bali N. P and Manish Goyal, “Text book of Engineering Mathematics”, Third edition,
Laxmi Publications(p) Ltd.,(2008).
th
2. Grewal. B.S, “Higher Engineering Mathematics”, 40 Edition, Khanna Publications,
Delhi, (2007).

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

REFERENCES:
1. Ramana B.V, “Higher Engineering Mathematics”, Tata McGraw Hill Publishing
Company, New Delhi, (2007).
th
2. Glyn James, “Advanced Engineering Mathematics”, 7 Edition, Pearson Education,
(2007).
3. Jain R.K and Iyengar S.R.K,” Advanced Engineering Mathematics”,
rd
3 Edition, Narosa Publishing House Pvt. Ltd., (2007).

PH2111 ENGINEERING PHYSICS – I L T P C

3 0 0 3

UNIT I ULTRASONICS 9
Introduction – Production – magnetostriction effect - magnetostriction generator-
piezoelectric effect - piezoelectric generator- Detection of ultrasonic waves properties –
Cavitations - Velocity measurement – acoustic grating - Industrial applications – drilling,
welding, soldering and cleaning – SONAR - Non Destructive Testing – pulse echo
system through transmission and reflection modes - A,B and C –scan displays, Medical
applications - Sonograms

UNIT II LASERS 9
Introduction – Principle of Spontaneous emission and stimulated emission. Population
inversion, pumping. Einsteins A and B coeffcients - derivation. Types of lasers – He-Ne,
CO Nd-YAG, Semiconductor lasers (homojunction & heterojunction) Qualitative
2 ,
Industrial Applications - Lasers in welding, heat treatment, cutting – Medical applications
- Holography (construction & reconstruction).

UNIT III FIBER OPTICS & APPLICATIONS 9

Principle and propagation of light in optical fibres – Numerical aperture and Acceptance
angle - Types of optical fibres (material, refractive index, mode) – Double crucible
technique of fibre drawing - Splicing, Loss in optical fibre – attenuation, dispersion,
bending - Fibre optical communication system (Block diagram) - Light sources -
Detectors - Fibre optic sensors – temperature & displacement - Endoscope.

UNIT IV QUANTUM PHYSICS 9

Black body radiation – Planck’s theory (derivation) – Deduction of Wien’s displacement
law and Rayleigh – Jeans’ Law from Planck’s theory – Compton effect. Theory and
experimental verification – Matter waves – Schrödinger’s wave equation – Time
independent and time dependent equations – Physical significance of wave function –
Particle in a one dimensional box - Electron microscope - Scanning electron microscope
- Transmission electron microscope.

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT V CRYSTAL PHYSICS 9

Lattice – Unit cell – Bravais lattice – Lattice planes – Miller indices – d spacing in cubic
lattice – Calculation of number of atoms per unit cell – Atomic radius – Coordination
number – Packing factor for SC, BCC, FCC and HCP structures – NaCl, ZnS, diamond
and graphite structures – Polymorphism and allotropy - Crystal defects – point, line and
surface defects- Burger vector.

TOTAL: 45 PERIODS

TEXT BOOKS:
1. R. K. Gaur and S.C. Gupta, ‘Engineering Physics’ Dhanpat Rai Publications, New
Delhi(2003)
2. M.N. Avadhanulu and PG Kshirsagar, ‘A Text book of Engineering Physics’,
S.Chand and company, Ltd., New Delhi, 2005.

REFERENCES:
th
1. Serway and Jewett, ‘Physics for Scientists and Engineers with Modern Physics’, 6
Edition, Thomson Brooks/Cole, Indian reprint (2007)
2. Rajendran, V and Marikani A, ‘Engineering Physics’ Tata McGraw Hill Publications
Ltd, III Edition, New Delhi, (2004).
3. Palanisamy, P.K., ‘Engineering Physics’ Scitech publications, Chennai, (2007).
4. Jayakumar. S, ‘Engineering Physics’, R.K. Publishers, Coimbatore, (2003).
5. Chitra Shadrach and Sivakumar Vadivelu, ‘Engineering Physics’, Pearson Education,
New Delhi, (2007).

CY2111 ENGINEERING CHEMISTRY – I LT P C

3 0 0 3
AIM
To impart a sound knowledge on the principles of chemistry involving the different
application oriented topics required for all engineering branches.

OBJECTIVES
• The student should be conversant with the principles water characterization and
treatment of potable and industrial purposes.
• Principles of polymer chemistry and engineering applications of polymers
• Industrial applications of surface chemistry
• Conventional and non-conventional energy sources and energy storage devices and
Chemistry of engineering materials
UNIT I WATER TECHNOLOGY 9
Characteristics – alkalinity – types of alkalinity and determination – hardness – types and
estimation by EDTA method (problems); Domestic water treatment – disinfection
methods (Chlorination, ozonation. UV treatment) – Boiler feed water – requirements –
disadvantages of using hard water in boilers – internal conditioning (phosphate, calgon
and carbonate conditioning methods) – external conditioning – demineralization process
– desalination and reverse osmosis.

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT II POLYMERS AND COMPOSITES 9

Polymers-definition – polymerization – types – addition and condensation polymerization
– free radical polymerization mechanism – Plastics, classification – preparation,
properties and uses of PVC, Teflon, polycarbonate, polyurethane, nylon-6,6, PET-
Rubber -vulcanization of rubber, synthetic rubbers – buty1 rubber, SBR, Composites –
definition, types polymer matrix composites – FRP only.

UNIT III SURFACE CHEMISTRY 9

Adsorption – types – adsorption of gases on solids – adsorption isotherms – Frendlich
and Langmuir isotherms – adsorption of solutes from solution – role of adsorbents in
catalysis, ion-exchange adsorption and pollution abatement.

UNIT IV NON-CONVENTIONAL ENERGY SOURCES AND

STORAGE DEVICES 9
Nuclear energy – fission and fusion reactions and light water nuclear reactor for power
generation (block diagram only) – breeder reactor – solar energy conversion – solar cells
– wind energy – fuel cells – hydrogen – oxygen fuel cell – batteries – alkaline batteries –
lead–acid, nickel–cadmium and lithium batteries.

UNIT V ENGINEERING MATERIALS 9

Refractories – classification – acidic, basic and neutral refractories – properties
(refractoriness, refractoriness under load, dimensional stability, porosity, thermal
spalling) – manufacture of alumina, magnesite and zirconia bricks, Abrasives – natural
and synthetic abrasives – quartz, corundum, emery, garnet, diamond, silicon carbide
and boron carbide. Lubricants – mechanism of lubrication, liquid lubricants, - properties
– viscosity index, flash and fire points, cloud and pour points, oilyness) – solid lubricants
– graphite and molybdenum sulphide. Nanomaterials – introduction to nanochemistry –
carbon nanotubes and their applications

TOTAL: 45 PERIODS

TEXT BOOKS:
1. P.C.Jain and Monica Jain, “Engineering Chemistry” Dhanpat Rai Pub, Co., New
Delhi (2002).
2. S.S. Dara “A text book of engineering chemistry” S.Chand & Co.Ltd., New Delhi
(2006).
REFERENCES:
1. B.K.Sharma “Engineering chemistry” Krishna Prakasan Media (P) Ltd., Meerut
(2001).
2. B. Sivasankar “Engineering Chemistry” Tata McGraw-Hill Pub.Co.Ltd, New Delhi
(2008).

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GE2111 ENGINEERING GRAPHICS L T P C

2 3 0 5
AIM
To develop graphic skills in students.
OBJECTIVES
To develop in students graphic skill for communication of concepts, ideas and design of
engineering products and expose them to existing national standards related to technical
drawings.
Concepts and conventions (Not for Examination) 1
Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering
and dimensioning.
UNIT I PLANE CURVES AND FREE HAND SKETCHING 15
Curves used in engineering practices:
Conics – Construction of ellipse, Parabola and hyperbola by eccentricity method –
Construction of cycloid – construction of involutes of squad and circle – Drawing of
tangents and normal to the above curves.
Free hand sketching:
Representation of Three Dimensional objects – General principles of orthographic
projection – Need for importance of multiple views and their placement – First angle
projection – layout views – Developing visualization skills through free hand sketching of
multiple views from pictorial views of objects.

UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 14

Projection of points and straight lines located in the first quadrant – Determination of true
lengths and true inclinations – Projection of polygonal surface and circular lamina
inclined to both reference planes.

UNIT III PROJECTION OF SOLIDS 15

Projection of simple solids like prisms, pyramids, cylinder and cone when the axis is
inclined to one reference plane by change of position method.

UNIT IV SECTION OF SOLIDS AND DEVELOPMENT OF SURFACES 15

Sectioning of above solids in simple vertical position by cutting planes inclined to one
reference plane and perpendicular to the other – Obtaining true shape of section.
Development of lateral surfaces of simple and truncated solids – Prisms, pyramids,
cylinders and cones – Development of lateral surfaces of solids with cylindrical cutouts,
perpendicular to the axis.

UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 15

Principles of isometric projection – isometric scale – isometric projections of simple
solids, truncated prisms, pyramids, cylinders and cones.
Perspective projection of prisms, pyramids and cylinders by visual ray method.

TOTAL: 75 PERIODS

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

TEXT BOOKS:
th
1. N.D. Bhatt, “Engineering Drawing” Charotar Publishing House, 46 Edition, (2003).

REFERENCES:
1. K. V. Natrajan, “A text book of Engineering Graphics”, Dhanalakshmi Publishers,
Chennai (2006).
2. M.S. Kumar, “Engineering Graphics”, D.D. Publications, (2007).
3. K. Venugopal & V. Prabhu Raja, “Engineering Graphics”, New Age International (P)
Limited (2008).
4. M.B. Shah and B.C. Rana, “Engineering Drawing”, Pearson Education (2005).
5. K. R. Gopalakrishnana, “Engineering Drawing” (Vol.I&II), Subhas Publications
(1998).
6. Dhananjay A.Jolhe, “Engineering Drawing with an introduction to AutoCAD” Tata
McGraw Hill Publishing Company Limited (2008).
7. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill
Publishing Company Limited, New Delhi, (2008).

Publication of Bureau of Indian Standards:

1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing
sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.

Special points applicable to University Examinations on Engineering Graphics:

1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The students will
be permitted to use appropriate scale to fit solution within A3 size.
4. Whenever the total number of candidates in a college exceeds 150, the University
Examination in that college will be conducted in two sessions (FN and AN on the
same day) for 50 percent of student (approx) at a time.

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GE2112 FUNDAMENTALS OF COMPUTING AND PROGRAMMING L T P C

3 0 0 3
AIM :
To provide an awareness to Computing and Programming
OBJECTIVES :
• To enable the student to learn the major components of a computer system
• To know the correct and efficient ways of solving problems
• To learn to use office automation tools
• To learn to program in C

UNIT I INTRODUCTION TO COMPUTERS 9

Introduction – Characteristics of Computers – Evolution of Computers - Computer
Generations – Classification of Computers – Basic Computer organization – Number
Systems

UNIT II COMPUTER SOFTWARE 9

Computer Software –Types of Software – Software Development Steps – Internet
Evolution - Basic Internet Terminology – Getting connected to Internet Applications.

UNIT III PROBLEM SOLVING AND OFFICE APPLICATION SOFTWARE 9

Planning the Computer Program – Purpose – Algorithm – Flow Charts – Pseudocode -
Application Software Packages- Introduction to Office Packages (not detailed commands
for examination).

UNIT IV INTRODUCTION TO C 9
Overview of C – Constants, Variables and Data Types – Operators and Expressions –
Managing Input and Output operators – Decision Making - Branching and Looping.

UNIT V FUNCTIONS AND POINTERS 9

Handling of Character Strings – User-defined Functions – Definitions – Declarations -
Call by reference – Call by value – Structures and Unions – Pointers – Arrays – The
Preprocessor – Developing a C Program : Some Guidelines
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Ashok.N.Kamthane,“ Computer Programming”, Pearson Education (India) (2008).
2. Behrouz A.Forouzan and Richard.F.Gilberg, “A Structured Programming Approach
Using C”, II Edition, Brooks-Cole Thomson Learning Publications, (2007).

REFERENCES:
1. Pradip Dey, Manas Ghoush, “Programming in C”, Oxford University Press. (2007).
nd
2. Byron Gottfried, “Programming with C”, 2 Edition, (Indian Adapted Edition), TMH
publications, (2006).
3. Stephen G.Kochan, “Programming in C”, Third Edition, Pearson Education India,
(2005).
4. Brian W.Kernighan and Dennis M.Ritchie, “The C Programming Language”, Pearson
Education Inc., (2005).
5. E.Balagurusamy, “Computing fundamentals and C Programming”, Tata McGraw-Hill
Publishing Company Limited, (2008).
6. S.Thamarai Selvi and R.Murugan, “C for All”, Anuradha Publishers, (2008).

10

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GE2115 COMPUTER PRACTICE LABORATORY – I L T P C

0 0 3 2

LIST OF EXERCISES
a) Word Processing 15
1. Document creation, Text manipulation with Scientific notations.
2. Table creation, Table formatting and Conversion.
3. Mail merge and Letter preparation.
4. Drawing - flow Chart

b) Spread Sheet 15
5. Chart - Line, XY, Bar and Pie.
6. Formula - formula editor.
7. Spread sheet - inclusion of object, Picture and graphics, protecting the document
and sheet.
8. Sorting and Import / Export features.

Simple C Programming * 15
9. Data types, Expression Evaluation, Condition Statements.
10. Arrays
11. Structures and Unions
12. Functions
TOTAL: 45 PERIODS
* For programming exercises Flow chart and pseudocode are essential

HARDWARE / SOFTWARE REQUIRED FOR A BATCH OF 30 STUDENTS

Hardware

LAN System with 33 nodes (OR) Standalone PCs – 33 Nos.

Printers – 3 Nos.

Software
OS – Windows / UNIX Clone
Application Package – Office suite
Compiler – C

11

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GE2116 ENGINEERING PRACTICES LABORATORY L T P C

0 0 3 2
OBJECTIVES
To provide exposure to the students with hands on experience on various basic
engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.

GROUP A (CIVIL & MECHANICAL)

I CIVIL ENGINEERING PRACTICE 9

Buildings:
(a) Study of plumbing and carpentry components of residential and industrial
buildings. Safety aspects.
Plumbing Works:
(a) Study of pipeline joints, its location and functions: valves, taps, couplings,
unions, reducers, elbows in household fittings.
(b) Study of pipe connections requirements for pumps and turbines.
(c) Preparation of plumbing line sketches for water supply and sewage works.
(d) Hands-on-exercise:
Basic pipe connections – Mixed pipe material connection – Pipe
connections with different joining components.
(e) Demonstration of plumbing requirements of high-rise buildings.
Carpentry using Power Tools only:
(a) Study of the joints in roofs, doors, windows and furniture.
(b) Hands-on-exercise:
Wood work, joints by sawing, planing and cutting.

II MECHANICAL ENGINEERING PRACTICE 13

Welding:
(a) Preparation of arc welding of butt joints, lap joints and tee joints.
(b) Gas welding practice

Basic Machining:
(a) Simple Turning and Taper turning
(b) Drilling Practice
Sheet Metal Work:
(a) Forming & Bending:
(b) Model making – Trays, funnels, etc.
(c) Different type of joints.
Machine assembly practice:
(a) Study of centrifugal pump
(b) Study of air conditioner
Demonstration on:
(a) Smithy operations, upsetting, swaging, setting down and bending. Example –
Exercise – Production of hexagonal headed bolt.
(b) Foundry operations like mould preparation for gear and step cone pulley.
(c) Fitting – Exercises – Preparation of square fitting and vee – fitting models.

12

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GROUP B (ELECTRICAL & ELECTRONICS)

III ELECTRICAL ENGINEERING PRACTICE 10

1. Residential house wiring using switches, fuse, indicator, lamp and energy
meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power
factor in RLC circuit.
5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.

IV ELECTRONICS ENGINEERING PRACTICE 13

1. Study of Electronic components and equipments – Resistor, colour coding
measurement of AC signal parameter (peak-peak, rms period, frequency)
using CR.
2. Study of logic gates AND, OR, EOR and NOT.
3. Generation of Clock Signal.
4. Soldering practice – Components Devices and Circuits – Using general
purpose PCB.
5. Measurement of ripple factor of HWR and FWR.

TOTAL: 45 PERIODS
REFERENCES:
1. K.Jeyachandran, S.Natarajan & S, Balasubramanian, “A Primer on Engineering
Practices Laboratory”, Anuradha Publications, (2007).
2. T.Jeyapoovan, M.Saravanapandian & S.Pranitha, “Engineering Practices Lab
Manual”, Vikas Puplishing House Pvt.Ltd, (2006)
3. H.S. Bawa, “Workshop Practice”, Tata McGraw – Hill Publishing Company Limited,
(2007).
4. A.Rajendra Prasad & P.M.M.S. Sarma, “Workshop Practice”, Sree Sai Publication,
(2002).
5. P.Kannaiah & K.L.Narayana, “Manual on Workshop Practice”, Scitech Publications,
(1999).

SEMESTER EXAMINATION PATTERN

The Laboratory examination is to be conducted for Group A & Group B, allotting 90

minutes for each group, with a break of 15 minutes. Both the examinations are to be
taken together in sequence, either in the FN session or in the AN session. The maximum
marks for Group A and Group B lab examinations will be 50 each, totaling 100 for the
Lab course. The candidates shall answer either I or II under Group A and either III or IV
under Group B, based on lots.

13

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

Engineering Practices Laboratory

List of equipment and components

(For a Batch of 30 Students)

CIVIL

1. Assorted components for plumbing consisting of metallic pipes,

plastic pipes, flexible pipes, couplings, unions, elbows, plugs and
other fittings. 15 Sets.
2. Carpentry vice (fitted to work bench) 15 Nos.
3. Standard woodworking tools 15 Sets.
4. Models of industrial trusses, door joints, furniture joints 5 each
5. Power Tools: (a) Rotary Hammer 2 Nos
(b) Demolition Hammer 2 Nos
(c) Circular Saw 2 Nos
(d) Planer 2 Nos
(e) Hand Drilling Machine 2 Nos
(f) Jigsaw 2 Nos
MECHANICAL

1. Arc welding transformer with cables and holders 5 Nos.

2. Welding booth with exhaust facility 5 Nos.
3. Welding accessories like welding shield, chipping hammer,
wire brush, etc. 5 Sets.
4. Oxygen and acetylene gas cylinders, blow pipe and other
welding outfit. 2 Nos.
5. Centre lathe 2 Nos.
6. Hearth furnace, anvil and smithy tools 2 Sets.
7. Moulding table, foundry tools 2 Sets.
8. Power Tool: Angle Grinder 2 Nos
9. Study-purpose items: centrifugal pump, air-conditioner One each.

ELECTRICAL

1. Assorted electrical components for house wiring 15 Sets

2. Electrical measuring instruments 10 Sets
3. Study purpose items: Iron box, fan and regulator, emergency lamp 1 each
4. Megger (250V/500V) 1 No.
5. Power Tools: (a) Range Finder 2 Nos
(b) Digital Live-wire detector 2 Nos

ELECTRONICS
1. Soldering guns 10 Nos.
2. Assorted electronic components for making circuits 50 Nos.
3. Small PCBs 10 Nos.
4. Multimeters 10 Nos.
5. Study purpose items: Telephone, FM radio, low-voltage power
supply

14

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

PHYSICS LABORATORY – I L T P C
0 0 3 -

LIST OF EXPERIMENTS

1. (a) Particle size determination using Diode Laser

(b) Determination of Laser parameters – Wavelength, and angle of
divergence.
(c) Determination of acceptance angle in an optical fiber.
2. Determination of thickness of a thin wire – Air wedge method
3. Determination of velocity of sound and compressibility of liquid – Ultrasonic
interferometer.
4. Determination of wavelength of mercury spectrum – spectrometer grating.
5. Determination of thermal conductivity of a bad conductor – Lee’s Disc
method.
6. Determination of Hysteresis loss in a ferromagnetic material

• A minimum of FIVE experiments shall be offered.

• Laboratory classes on alternate weeks for Physics and Chemistry.
• The lab examinations will be held only in the second semester.

CHEMISTRY LABORATORY – I L T P C
0 0 3 -

LIST OF EXPERIMENTS

1. Estimation of hardness of Water by EDTA

2. Estimation of Copper in brass by EDTA
3. Determination of DO in water ( Winkler’s method)
4. Estimation of Chloride in Water sample (Argentometric)
5. Estimation of alkalinity of Water sample
6. Determination of molecular weight and degree of polymerization using
viscometry.

• A minimum of FIVE experiments shall be offered.

• Laboratory classes on alternate weeks for Physics and Chemistry.
• The lab examinations will be held only in the second semester.

15

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

16

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

ANNA UNIVERSITY, CHENNAI

AFFILIATED INSTITUTIONS

R - 2008
B.TECH. CHEMICAL ENGINEERING
II - VIII SEMESTERS CURRICULA AND SYLLABI

SEMESTER II
(Common to all B. E. / B. Tech. Degree Programmes except B. E. – Marine
Engineering)

SL.
COURSE
No. COURSE TITLE L T P C
CODE
THEORY
1. HS2161 Technical English – II* 3 1 0 4
2. MA2161 Mathematics – II* 3 1 0 4
3. PH2161 Engineering Physics – II* 3 0 0 3
4. CY2161 Engineering Chemistry – II* 3 0 0 3
5. a ME2151 Engineering Mechanics 3 1 0 4
(For non-circuit branches)
5. b EE2151 Circuit Theory 3 1 0 4
(For branches under Electrical Faculty)
5. c EC2151 Electric Circuits and Electron Devices 3 1 0 4
(For branches under I & C Faculty)
6. a GE2151 Basic Electrical & Electronics Engineering 4 0 0 4
(For non-circuit branches)

6. b GE2152 Basic Civil & Mechanical Engineering 4 0 0 4

(For circuit branches)
PRACTICAL
7. GE2155 Computer Practice Laboratory-II* 0 1 2 2
8. GS2165 Physics & Chemistry Laboratory – II* 0 0 3 2
9. a ME2155 Computer Aided Drafting and Modeling 0 1 2 2
Laboratory
(For non-circuits branches)
9. b EE2155 Electrical Circuits Laboratory 0 0 3 2
(For branches under Electrical Faculty)
9. c EC2155 Circuits and Devices Laboratory 0 0 3 2
(For branches under I & C Faculty)
TOTAL : 28 CREDITS
+
10.
- English Language Laboratory 0 0 2 -

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

A. CIRCUIT BRANCHES

I Faculty of Electrical Engineering

1. B.E. Electrical and Electronics Engineering

2. B.E. Electronics and Instrumentation Engineering
3. B.E. Instrumentation and Control Engineering

II Faculty of Information and Communication Engineering

1. B.E. Computer Science and Engineering

2. B.E. Electronics and Communication Engineering
3. B.E. Bio Medical Engineering
4. B.Tech. Information Technology

B. NON – CIRCUIT BRANCHES

I Faculty of Civil Engineering

1. B.E. Civil Engineering

II Faculty of Mechanical Engineering

1. B.E. Aeronautical Engineering

2. B.E. Automobile Engineering
3. B.E. Marine Engineering
4. B.E. Mechanical Engineering
5. B.E. Production Engineering

III Faculty of Technology

1. B.Tech. Chemical Engineering

2. B.Tech. Biotechnology
3. B.Tech. Polymer Technology
4. B.Tech. Textile Technology
5. B.Tech. Textile Technology (Fashion Technology)
6. B.Tech. Petroleum Engineering
7. B.Tech. Plastics Technology

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

SEMESTER – III
(Applicable to the students admitted from the Academic year 2008 – 2009 onwards)

CODE NO. COURSE TITLE L T P C

THEORY
MA 2211 Transforms and Partial Differential Equation 3 1 0 4
ME 2205 Electrical Drives and Controls 3 0 0 3
CH 2201 Organic Chemistry 3 0 0 3
CH 2202 Mechanics of Solids 3 0 0 3
CH 2203 Fluid Mechanics 3 0 0 3
GE2211 Environmental Science and Engineering 3 0 0 3
PRACTICALS
CH 2207 Organic Chemistry Lab. 0 0 3 2
CH 2208 Basic Electrical Electronics Engineering Lab 0 0 3 2
CH 2209 Fluid Mechanics Lab 0 0 3 2
TOTAL 18 1 9 25

SEMESTER – IV
(Applicable to the students admitted from the Academic year 2008 – 2009 onwards)

CODE NO. COURSE TITLE L T P C

THEORY
MA 2263 Probability and Statistics 3 1 0 4
CH 2251 Physical Chemistry 3 0 0 3
CH 2252 Instrumental Methods of Analysis 3 0 0 3
CH 2253 Chemical Process Industries I 3 0 0 3
CH 2254 Chemical Process Calculations 3 0 0 3
CH 2255 Mechanical Operations 3 0 0 3
PRACTICALS
CH 2257 Chemical Analysis Lab 0 0 3 2
CH 2258 Physical Chemistry Lab 0 0 3 2
CH 2259 Mechanical Operations Lab 0 0 3 2
TOTAL 18 1 9 25

SEMESTER – V

CODE NO. COURSE TITLE L T P C

THEORY
MA 2264 Numerical Methods 3 1 0 4
CH 2301 Materials Technology 3 0 0 3
CH 2302 Chemical Process Industries II 3 0 0 3
CH 2303 Chemical Engineering Thermodynamics I 3 0 0 3
CH 2304 Heat Transfer 3 0 0 3
CH 2305 Mass Transfer-I 3 0 0 3
PRACTICALS
GE 2321 Communication Skills Laboratory 0 0 4 2
CH 2307 Technical Analysis Lab 0 0 3 2
CH 2308 Heat Transfer Lab 0 0 3 2
TOTAL 18 1 10 25

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

SEMESTER – VI

CODE NO. COURSE TITLE L T P C

THEORY
CH 2351 Chemical Engineering Thermodynamics II 3 1 0 4
CH 2352 Mass Transfer-II 3 0 0 3
CH 2353 Chemical Reaction Engineering I 3 0 0 3
CH 2354 Process Instrumentation & Control 3 0 0 3
CH 2355 Process Plant Utilities 3 0 0 3
CH 2356 Energy Engineering 3 0 0 3
PRACTICALS
CH 2357 Process Equipment Design I 0 0 3 2
CH 2358 Mass Transfer Lab 0 0 3 2
CH 2359 Process Control Lab 0 0 3 2
TOTAL 18 1 9 25

SEMESTER – VII

CODE NO. COURSE TITLE L T P C

THEORY
CH 2401 Chemical Reaction Engineering II 3 0 0 3
CH 2402 Transport Phenomena 3 0 0 3
CH 2403 Biochemical Engineering 3 0 0 3
CH 2404 Process Economics 3 0 0 3
CH 2405 Chemical Process Plant Safety 3 0 0 3
Elective I 3 0 0 3

PRACTICALS
CH 2407 Process Equipment Design II 0 0 3 2
CH 2408 Chemical Reaction Engineering Lab. 0 0 3 2
CH 2409 Seminar and Comprehension 0 0 2 1
TOTAL 18 0 8 23

SEMESTER – VIII

CODE NO. COURSE TITLE L T P C

GE 2022 Total Quality Management 3 0 0 3
Elective II 3 0 0 3
Elective III 3 0 0 3
PRACTICALS
CH 2451 Project Work 0 0 12 6
TOTAL 9 0 12 15

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

ELECTIVE I

CODE NO. COURSE TITLE L T P C

CH 2021 Food Technology 3 0 0 3
CH 2022 Enzyme Engineering 3 0 0 3
CH 2023 Fluidization Engineering 3 0 0 3
CH 2024 Process Optimization 3 0 0 3
GE 2025 Professional Ethics in Engineering 3 0 0 3
CH 2025 Air Pollution and Control 3 0 0 3

ELECTIVE II

CODE NO. COURSE TITLE L T P C

CH 2031 Drugs and Pharmaceutical Technology 3 0 0 3
CH 2032 Fertilizer Technology 3 0 0 3
CH 2033 Modern Separation Processes 3 0 0 3
CH 2034 Waste Water Treatment 3 0 0 3
CH 2035 Industrial Management 3 0 0 3
CH 2036 Fermentation Engineering 3 0 0 3

ELECTIVE III

CODE NO. COURSE TITLE L T P C

CH 2041 Petroleum Technology 3 0 0 3
CH 2042 Pulp and Paper Technology 3 0 0 3
CH 2043 Polymer Technology 3 0 0 3
CH 2044 Process Modeling and Simulation 3 0 0 3
CH 2045 Computer Applications in Chemical Engg. 3 0 0 3
GE 2023 Fundamentals of Nano Science 3 0 0 3

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

HS2161 TECHNICAL ENGLISH II L T P C

3 1 0 4
AIM
To encourage students to actively involve in participative learning of English and to help
them acquire Communication Skills.
OBJECTIVES
 To help students develop listening skills for academic and professional purposes.
 To help students acquire the ability to speak effectively in English in real-life
situations.
 To inculcate reading habit and to develop effective reading skills.
 To help students improve their active and passive vocabulary.
 To familiarize students with different rhetorical functions of scientific English.
 To enable students write letters and reports effectively in formal and business
situations.
UNIT I 12
Technical Vocabulary - meanings in context, sequencing words, Articles- Prepositions,
intensive reading& predicting content, Reading and interpretation, extended definitions,
Process description
Suggested activities:
1. Exercises on word formation using the prefix ‘self’ - Gap filling with preposition.
2. Exercises - Using sequence words.
3. Reading comprehension exercise with questions based on inference – Reading
headings
4. and predicting the content – Reading advertisements and interpretation.
5. Writing extended definitions – Writing descriptions of processes – Writing
paragraphs based on discussions – Writing paragraphs describing the future.
UNIT II 12
Phrases / Structures indicating use / purpose – Adverbs-Skimming – Non-verbal
communication - Listening – correlating verbal and non-verbal communication -Speaking
in group discussions – Formal Letter writing – Writing analytical paragraphs.
Suggested activities:
1. Reading comprehension exercises with questions on overall content –
Discussions analyzing stylistic features (creative and factual description) -
Reading comprehension exercises with texts including graphic communication -
Exercises in interpreting non-verbal communication.
2. Listening comprehension exercises to categorise data in tables.
3. Writing formal letters, quotations, clarification, complaint – Letter seeking
permission for Industrial visits– Writing analytical paragraphs on different
debatable issues.

UNIT III 12
Cause and effect expressions – Different grammatical forms of the same word -
Speaking – stress and intonation, Group Discussions - Reading – Critical reading -
Listening, - Writing – using connectives, report writing – types, structure, data collection,
content, form, recommendations .
Suggested activities:
1. Exercises combining sentences using cause and effect expressions – Gap filling
exercises using the appropriate tense forms – Making sentences using different
grammatical forms of the same word. ( Eg: object –verb / object – noun )
2. Speaking exercises involving the use of stress and intonation – Group
discussions– analysis of problems and offering solutions.
6

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

3. Reading comprehension exercises with critical questions, Multiple choice

question.
4. Sequencing of jumbled sentences using connectives – Writing different types of
reports like industrial accident report and survey report – Writing
recommendations.

UNIT IV 12
Numerical adjectives – Oral instructions – Descriptive writing – Argumentative
paragraphs – Letter of application - content, format (CV / Bio-data) - Instructions,
imperative forms - Checklists, Yes/No question form – E-mail communication.
Suggested Activities:
1. Rewriting exercises using numerical adjectives.
2. Reading comprehension exercises with analytical questions on content –
Evaluation of content.
3. Listening comprehension – entering information in tabular form, intensive listening
exercise and completing the steps of a process.
4. Speaking - Role play – group discussions – Activities giving oral instructions.
5. Writing descriptions, expanding hints – Writing argumentative paragraphs –
Writing formal letters – Writing letter of application with CV/Bio-data – Writing
general and safety instructions – Preparing checklists – Writing e-mail messages.

UNIT V 9
Speaking - Discussion of Problems and solutions - Creative and critical thinking –
Writing an essay, Writing a proposal.
Suggested Activities:
1. Case Studies on problems and solutions
2. Brain storming and discussion
3. Writing Critical essays
4. Writing short proposals of 2 pages for starting a project, solving problems,
etc.
5. Writing advertisements.
TOTAL: 60 PERIODS
TEXT BOOK
1. Chapters 5 – 8. Department of Humanities & Social Sciences, Anna University,
‘English for Engineers and Technologists’ Combined Edition (Volumes 1 & 2),
Chennai: Orient Longman Pvt. Ltd., 2006. Themes 5 – 8 (Technology,
Communication, Environment, Industry)
REFERENCES
1. P. K. Dutt, G. Rajeevan and C.L.N Prakash, ‘A Course in Communication Skills’,
Cambridge University Press, India 2007.
2. Krishna Mohan and Meera Banerjee, ‘Developing Communication Skills’, Macmillan
India Ltd., (Reprinted 1994 – 2007).
3. Edgar Thorpe, Showick Thorpe, ‘Objective English’, Second Edition, Pearson
Education, 2007.

Extensive Reading:
1. Robin Sharma, ‘The Monk Who Sold His Ferrari’, Jaico Publishing House, 2007

Note:
The book listed under Extensive Reading is meant for inculcating the reading habit of the
students. They need not be used for testing purposes.

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

MA2161 MATHEMATICS – II LT P C
3 1 0 4

UNIT I ORDINARY DIFFERENTIAL EQUATIONS 12

Higher order linear differential equations with constant coefficients – Method of variation
of parameters – Cauchy’s and Legendre’s linear equations – Simultaneous first order
linear equations with constant coefficients.

UNIT II VECTOR CALCULUS 12

Gradient Divergence and Curl – Directional derivative – Irrotational and solenoidal vector
fields – Vector integration – Green’s theorem in a plane, Gauss divergence theorem and
stokes’ theorem (excluding proofs) – Simple applications involving cubes and
rectangular parallelpipeds.

UNIT III ANALYTIC FUNCTIONS 12

Functions of a complex variable – Analytic functions – Necessary conditions, Cauchy –
Riemann equation and Sufficient conditions (excluding proofs) – Harmonic and
orthogonal properties of analytic function – Harmonic conjugate – Construction of
analytic functions – Conformal mapping : w= z+c, cz, 1/z, and bilinear transformation.

UNIT IV COMPLEX INTEGRATION 12

Complex integration – Statement and applications of Cauchy’s integral theorem and
Cauchy’s integral formula – Taylor and Laurent expansions – Singular points – Residues
– Residue theorem – Application of residue theorem to evaluate real integrals – Unit
circle and semi-circular contour(excluding poles on boundaries).

UNIT V LAPLACE TRANSFORM 12

Laplace transform – Conditions for existence – Transform of elementary functions –
Basic properties – Transform of derivatives and integrals – Transform of unit step
function and impulse functions – Transform of periodic functions.
Definition of Inverse Laplace transform as contour integral – Convolution theorem
(excluding proof) – Initial and Final value theorems – Solution of linear ODE of second
order with constant coefficients using Laplace transformation techniques.

TOTAL: 60 PERIODS

TEXT BOOK
rd
1. Bali N. P and Manish Goyal, “Text book of Engineering Mathematics”, 3 Edition,
Laxmi Publications (p) Ltd., (2008).
th
2. Grewal. B.S, “Higher Engineering Mathematics”, 40 Edition, Khanna Publications,
Delhi, (2007).

REFERENCES
1. Ramana B.V, “Higher Engineering Mathematics”,Tata McGraw Hill Publishing
Company, New Delhi, (2007).
rd
2. Glyn James, “Advanced Engineering Mathematics”, 3 Edition, Pearson Education,
(2007).
th
3. Erwin Kreyszig, “Advanced Engineering Mathematics”, 7 Edition, Wiley India,
(2007).
rd
4. Jain R.K and Iyengar S.R.K, “Advanced Engineering Mathematics”, 3 Edition,
Narosa Publishing House Pvt. Ltd., (2007).

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

PH2161 ENGINEERING PHYSICS – II L T P C

3 0 0 3

UNIT I CONDUCTING MATERIALS 9

Conductors – classical free electron theory of metals – Electrical and thermal
conductivity – Wiedemann – Franz law – Lorentz number – Draw backs of classical
theory – Quantum theory – Fermi distribution function – Effect of temperature on Fermi
Function – Density of energy states – carrier concentration in metals.

UNIT II SEMICONDUCTING MATERIALS 9

Intrinsic semiconductor – carrier concentration derivation – Fermi level – Variation of
Fermi level with temperature – electrical conductivity – band gap determination –
extrinsic semiconductors – carrier concentration derivation in n-type and p-type
semiconductor – variation of Fermi level with temperature and impurity concentration –
compound semiconductors – Hall effect –Determination of Hall coefficient – Applications.

UNIT III MAGNETIC AND SUPERCONDUCTING MATERIALS 9

Origin of magnetic moment – Bohr magneton – Dia and para magnetism – Ferro
magnetism – Domain theory – Hysteresis – soft and hard magnetic materials – anti –
ferromagnetic materials – Ferrites – applications – magnetic recording and readout –
storage of magnetic data – tapes, floppy and magnetic disc drives.
Superconductivity : properties - Types of super conductors – BCS theory of
superconductivity(Qualitative) - High Tc superconductors – Applications of
superconductors – SQUID, cryotron, magnetic levitation.

UNIT IV DIELECTRIC MATERIALS 9

Electrical susceptibility – dielectric constant – electronic, ionic, orientational and space
charge polarization – frequency and temperature dependence of polarisation – internal
field – Claussius – Mosotti relation (derivation) – dielectric loss – dielectric breakdown –
uses of dielectric materials (capacitor and transformer) – ferroelectricity and applications.

UNIT V MODERN ENGINEERING MATERIALS 9

Metallic glasses: preparation, properties and applications.
Shape memory alloys (SMA): Characteristics, properties of NiTi alloy, application,
advantages and disadvantages of SMA
Nanomaterials: synthesis –plasma arcing – chemical vapour deposition – sol-gels –
electrodeposition – ball milling - properties of nanoparticles and applications.
Carbon nanotubes: fabrication – arc method – pulsed laser deposition – chemical vapour
deposition - structure – properties and applications.

TOTAL : 45 PERIODS
TEXT BOOKS
1. Charles Kittel ‘ Introduction to Solid State Physics’, John Wiley & sons,
th
7 edition, Singapore (2007)
2. Charles P. Poole and Frank J.Ownen, ’Introduction to Nanotechnology’, Wiley
India(2007) (for Unit V)
REFERENCES
1. Rajendran, V, and Marikani A, ‘Materials science’Tata McGraw Hill publications,
(2004) New delhi.
2. Jayakumar, S. ‘Materials science’, R.K. Publishers, Coimbatore, (2008).
3. Palanisamy P.K, ‘Materials science’, Scitech publications(India) Pvt. LTd., Chennai,
second Edition(2007)
4. M. Arumugam, ‘Materials Science’ Anuradha publications, Kumbakonam, (2006).
9

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CY2161 ENGINEERING CHEMISTRY – II LT PC

3 0 03
AIM
To impart a sound knowledge on the principles of chemistry involving the different
application oriented topics required for all engineering branches.

OBJECTIVES
• The student should be conversant with the principles electrochemistry,
electrochemical cells, emf and applications of emf measurements.
• Principles of corrosion control
• Chemistry of Fuels and combustion
• Industrial importance of Phase rule and alloys
• Analytical techniques and their importance.

UNIT I ELECTROCHEMISTRY 9
Electrochemical cells – reversible and irreversible cells – EMF – measurement of emf –
Single electrode potential – Nernst equation (problem) – reference electrodes –Standard
Hydrogen electrode -Calomel electrode – Ion selective electrode – glass electrode and
measurement of pH – electrochemical series – significance – potentiometer titrations
+ + -
(redox - Fe² vs dichromate and precipitation – Ag vs CI titrations) and conduct metric
titrations (acid-base – HCI vs, NaOH) titrations,

UNIT II CORROSION AND CORROSION CONTROL 9

Chemical corrosion – Pilling – Bedworth rule – electrochemical corrosion – different
types – galvanic corrosion – differential aeration corrosion – factors influencing corrosion
– corrosion control – sacrificial anode and impressed cathodic current methods –
corrosion inhibitors – protective coatings – paints – constituents and functions – metallic
coatings – electroplating (Au) and electroless (Ni) plating.

UNIT III FUELS AND COMBUSTION 9

Calorific value – classification – Coal – proximate and ultimate analysis metallurgical
coke – manufacture by Otto-Hoffmann method – Petroleum processing and fractions –
cracking – catalytic cracking and methods-knocking – octane number and cetane
number – synthetic petrol – Fischer Tropsch and Bergius processes – Gaseous fuels-
water gas, producer gas, CNG and LPG, Flue gas analysis – Orsat apparatus –
theoretical air for combustion.
UNIT IV PHASE RULE AND ALLOYS 9
Statement and explanation of terms involved – one component system – water system –
condensed phase rule – construction of phase diagram by thermal analysis – simple
eutectic systems (lead-silver system only) – alloys – importance, ferrous alloys –
nichrome and stainless steel – heat treatment of steel, non-ferrous alloys – brass and
bronze.
UNIT V ANALYTICAL TECHNIQUES 9
Beer-Lambert’s law (problem) – UV-visible spectroscopy and IR spectroscopy –
principles – instrumentation (problem) (block diagram only) – estimation of iron by
colorimetry – flame photometry – principle – instrumentation (block diagram only) –
estimation of sodium by flame photometry – atomic absorption spectroscopy – principles
– instrumentation (block diagram only) – estimation of nickel by atomic absorption
spectroscopy.

TOTAL: 45 PERIODS

10

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

TEXT BOOKS
1. P.C.Jain and Monica Jain, “Engineering Chemistry” Dhanpat Rai Pub, Co., New
Delhi (2002).
2. S.S.Dara “A text book of Engineering Chemistry” S.Chand & Co.Ltd., New Delhi
(2006).

REFERENCES
1. B.Sivasankar “Engineering Chemistry” Tata McGraw-Hill Pub.Co.Ltd, New Delhi
(2008).
2. B.K.Sharma “Engineering Chemistry” Krishna Prakasan Media (P) Ltd., Meerut
(2001).

ME2151 ENGINEERING MECHANICS L T P C

3 1 0 4
OBJECTIVE
At the end of this course the student should be able to understand the vectorial and
scalar representation of forces and moments, static equilibrium of particles and rigid
bodies both in two dimensions and also in three dimensions. Further, he should
understand the principle of work and energy. He should be able to comprehend the
effect of friction on equilibrium. He should be able to understand the laws of motion, the
kinematics of motion and the interrelationship. He should also be able to write the
dynamic equilibrium equation. All these should be achieved both conceptually and
through solved examples.

UNIT I BASICS & STATICS OF PARTICLES 12

Introduction – Units and Dimensions – Laws of Mechanics – Lame’s theorem,
Parallelogram and triangular Law of forces – Vectors – Vectorial representation of forces
and moments – Vector operations: additions, subtraction, dot product, cross product –
Coplanar Forces – Resolution and Composition of forces – Equilibrium of a particle –
Forces in space – Equilibrium of a particle in space – Equivalent systems of forces –
Principle of transmissibility – Single equivalent force.

UNIT II EQUILIBRIUM OF RIGID BODIES 12

Free body diagram – Types of supports and their reactions – requirements of stable
equilibrium – Moments and Couples – Moment of a force about a point and about an
axis – Vectorial representation of moments and couples – Scalar components of a
moment – Varignon’s theorem – Equilibrium of Rigid bodies in two dimensions –
Equilibrium of Rigid bodies in three dimensions – Examples

UNIT III PROPERTIES OF SURFACES AND SOLIDS 12

Determination of Areas and Volumes – First moment of area and the Centroid of
sections – Rectangle, circle, triangle from integration – T section, I section, - Angle
section, Hollow section by using standard formula – second and product moments of
plane area – Rectangle, triangle, circle from integration – T section, I section, Angle
section, Hollow section by using standard formula – Parallel axis theorem and
perpendicular axis theorem – Polar moment of inertia – Principal moments of inertia of
plane areas – Principal axes of inertia – Mass moment of inertia – Derivation of mass
moment of inertia for rectangular section, prism, sphere from first principle – Relation to
area moments of inertia.

11

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV DYNAMICS OF PARTICLES 12

Displacements, Velocity and acceleration, their relationship – Relative motion –
Curvilinear motion – Newton’s law – Work Energy Equation of particles – Impulse and
Momentum – Impact of elastic bodies.

UNIT V FRICTION AND ELEMENTS OF RIGID BODY DYNAMICS 12

Frictional force – Laws of Coloumb friction – simple contact friction – Rolling resistance –
Belt friction.
Translation and Rotation of Rigid Bodies – Velocity and acceleration – General Plane
motion.

TOTAL: 60 PERIODS
TEXT BOOK
1. Beer, F.P and Johnson Jr. E.R. “Vector Mechanics for Engineers”, Vol. 1 Statics and
Vol. 2 Dynamics, McGraw-Hill International Edition, (1997).

REFERENCES
1. Rajasekaran, S, Sankarasubramanian, G., “Fundamentals of Engineering
Mechanics”, Vikas Publishing House Pvt. Ltd., (2000).
2. Hibbeller, R.C., “Engineering Mechanics”, Vol. 1 Statics, Vol. 2 Dynamics, Pearson
Education Asia Pvt. Ltd., (2000).
3. Palanichamy, M.S., Nagam, S., “Engineering Mechanics – Statics & Dynamics”, Tata
McGraw-Hill, (2001).
4. Irving H. Shames, “Engineering Mechanics – Statics and Dynamics”, IV Edition –
Pearson Education Asia Pvt. Ltd., (2003).
5. Ashok Gupta, “Interactive Engineering Mechanics – Statics – A Virtual Tutor
(CDROM)”, Pearson Education Asia Pvt., Ltd., (2002).

EE2151 CIRCUIT THEORY L T P C

(Common to EEE, EIE and ICE Branches) 3 1 0 4

UNIT I BASIC CIRCUITS ANALYSIS 12

Ohm’s Law – Kirchoffs laws – DC and AC Circuits – Resistors in series and parallel
circuits – Mesh current and node voltage method of analysis for D.C and A.C. circuits.

UNIT II NETWORK REDUCTION AND NETWORK THEOREMS FOR DC AND

AC CIRCUITS: 12
Network reduction: voltage and current division, source transformation – star delta
conversion.
Thevenins and Novton & Theorem – Superposition Theorem – Maximum power transfer
theorem – Reciprocity Theorem.

UNIT III RESONANCE AND COUPLED CIRCUITS 12

Series and paralled resonance – their frequency response – Quality factor and
Bandwidth - Self and mutual inductance – Coefficient of coupling – Tuned circuits –
Single tuned circuits.

12

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV TRANSIENT RESPONSE FOR DC CIRCUITS 12

Transient response of RL, RC and RLC Circuits using Laplace transform for DC input
and A.C. with sinusoidal input.

UNIT V ANALYSING THREE PHASE CIRCUITS 12

Three phase balanced / unbalanced voltage sources – analysis of three phase 3-wire
and 4-wire circuits with star and delta connected loads, balanced & un balanced –
phasor diagram of voltages and currents – power and power factor measurements in
three phase circuits.
TOTAL: 60 PERIODS

TEXT BOOKS
1. William H. Hayt Jr, Jack E. Kemmerly and Steven M. Durbin, “Engineering Circuits
th
Analysis”,Tata McGraw Hill publishers, 6 edition, New Delhi, (2002).
2. Sudhakar A and Shyam Mohan SP, “Circuits and Network Analysis and
Synthesis”,Tata McGraw Hill, (2007).

REFERENCES
1. Paranjothi SR, “Electric Circuits Analysis,” New Age International Ltd., New Delhi,
(1996).
2. Joseph A. Edminister, Mahmood Nahri, “Electric circuits”, Schaum’s series, Tata
McGraw-Hill, New Delhi (2001).
3. Chakrabati A, “Circuits Theory (Analysis and synthesis), Dhanpath Rai & Sons, New
Delhi, (1999).
4. Charles K. Alexander, Mathew N.O. Sadik, “Fundamentals of Electric Circuits”,
Second Edition, McGraw Hill, (2003).

EC2151 ELECTRIC CIRCUITS AND ELECTRON DEVICES LT P C

(For ECE, CSE, IT and Biomedical Engg. Branches) 3 1 0 4

UNIT I CIRCUIT ANALYSIS TECHNIQUES 12

Kirchoff’s current and voltage laws – series and parallel connection of independent
sources – R, L and C – Network Theorems – Thevenin, Superposition, Norton,
Maximum power transfer and duality – Star-delta conversion.

UNIT II TRANSIENT RESONANCE IN RLC CIRCUITS 12

Basic RL, RC and RLC circuits and their responses to pulse and sinusoidal inputs –
frequency response – Parallel and series resonances – Q factor – single tuned and
double tuned circuits.

UNIT III SEMICONDUCTOR DIODES 12

Review of intrinsic & extrinsic semiconductors – Theory of PN junction diode – Energy
band structure – current equation – space charge and diffusion capacitances – effect of
temperature and breakdown mechanism – Zener diode and its characteristics.

13

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV TRANSISTORS 12
Principle of operation of PNP and NPN transistors – study of CE, CB and CC
configurations and comparison of their characteristics – Breakdown in transistors –
operation and comparison of N-Channel and P-Channel JFET – drain current equation –
MOSFET – Enhancement and depletion types – structure and operation – comparison of
BJT with MOSFET – thermal effect on MOSFET.

UNIT V SPECIAL SEMICONDUCTOR DEVICES (Qualitative Treatment only) 12

Tunnel diodes – PIN diode, varactor diode – SCR characteristics and two transistor
equivalent model – UJT – Diac and Triac – Laser, CCD, Photodiode, Phototransistor,
Photoconductive and Photovoltaic cells – LED, LCD.
TOTAL : 60 PERIODS
TEXT BOOKS
1. Joseph A. Edminister, Mahmood, Nahri, “Electric Circuits” – Shaum series,Tata
McGraw Hill, (2001)
2. S. Salivahanan, N. Suresh kumar and A. Vallavanraj, “Electronic Devices and
nd
Circuits”,Tata McGraw Hill, 2 Edition, (2008).
th
3. David A. Bell, “Electronic Devices and Circuits”, Oxford University Press, 5 Edition,
(2008).

REFERENCES
1. Robert T. Paynter, “Introducing Electronics Devices and Circuits”, Pearson
th
Education, 7 Education, (2006).
2. William H. Hayt, J.V. Jack, E. Kemmebly and steven M. Durbin, “Engineering Circuit
th
Analysis”,Tata McGraw Hill, 6 Edition, 2002.
3. J. Millman & Halkins, Satyebranta Jit, “Electronic Devices & Circuits”,Tata McGraw
nd
Hill, 2 Edition, 2008.

GE2151 BASIC ELECTRICAL AND ELECTRONICS ENGINEERING LT P C

(Common to branches under Civil, Mechanical and Technology faculty) 4 0 0 4

UNIT I ELECTRICAL CIRCUITS & MEASURMENTS 12

Ohm’s Law – Kirchoff’s Laws – Steady State Solution of DC Circuits – Introduction to AC
Circuits – Waveforms and RMS Value – Power and Power factor – Single Phase and
Three Phase Balanced Circuits.
Operating Principles of Moving Coil and Moving Iron Instruments (Ammeters and
Voltmeters), Dynamometer type Watt meters and Energy meters.

UNIT II ELECTRICAL MECHANICS 12

Construction, Principle of Operation, Basic Equations and Applications of DC
Generators, DC Motors, Single Phase Transformer, single phase induction Motor.

UNIT III SEMICONDUCTOR DEVICES AND APPLICATIONS 12

Characteristics of PN Junction Diode – Zener Effect – Zener Diode and its
Characteristics – Half wave and Full wave Rectifiers – Voltage Regulation.
Bipolar Junction Transistor – CB, CE, CC Configurations and Characteristics –
Elementary Treatment of Small Signal Amplifier.

14

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV DIGITAL ELECTRONICS 12

Binary Number System – Logic Gates – Boolean Algebra – Half and Full Adders – Flip-
Flops – Registers and Counters – A/D and D/A Conversion (single concepts)

UNIT V FUNDAMENTALS OF COMMUNICATION ENGINEERING 12

Types of Signals: Analog and Digital Signals – Modulation and Demodulation: Principles
of Amplitude and Frequency Modulations.

Communication Systems: Radio, TV, Fax, Microwave, Satellite and Optical Fibre (Block
Diagram Approach only).

TOTAL: 60 PERIODS
TEXT BOOKS
1. V.N. Mittle “Basic Electrical Engineering”,Tata McGraw Hill Edition, New Delhi, 1990.
2. R.S. Sedha, “Applied Electronics” S. Chand & Co., 2006.

REFERENCES
1. Muthusubramanian R, Salivahanan S and Muraleedharan K A, “Basic Electrical,
Electronics and Computer Engineering”,Tata McGraw Hill, Second Edition, (2006).
2. Nagsarkar T K and Sukhija M S, “Basics of Electrical Engineering”, Oxford press
(2005).
3. Mehta V K, “Principles of Electronics”, S.Chand & Company Ltd, (1994).
4. Mahmood Nahvi and Joseph A. Edminister, “Electric Circuits”, Schaum’ Outline
Series, McGraw Hill, (2002).
5. Premkumar N, “Basic Electrical Engineering”, Anuradha Publishers, (2003).

GE2152 BASIC CIVIL & MECHANICAL ENGINEERING L T P C

(Common to branches under Electrical and I & C Faculty) 4 0 0 4

A – CIVIL ENGINEERING

UNIT I SURVEYING AND CIVIL ENGINEERING MATERIALS 15

Surveying: Objects – types – classification – principles – measurements of distances –
angles – leveling – determination of areas – illustrative examples.

Civil Engineering Materials: Bricks – stones – sand – cement – concrete – steel

sections.

UNIT II BUILDING COMPONENTS AND STRUCTURES 15

Foundations: Types, Bearing capacity – Requirement of good foundations.

Superstructure: Brick masonry – stone masonry – beams – columns – lintels – roofing

– flooring – plastering – Mechanics – Internal and external forces – stress – strain –
elasticity – Types of Bridges and Dams – Basics of Interior Design and Landscaping.

TOTAL: 30 PERIODS

15

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

B – MECHANICAL ENGINEERING

UNIT III POWER PLANT ENGINEERING 10

Introduction, Classification of Power Plants – Working principle of steam, Gas, Diesel,
Hydro-electric and Nuclear Power plants – Merits and Demerits – Pumps and turbines –
working principle of Reciprocating pumps (single acting and double acting) – Centrifugal
Pump.

UNIT IV I C ENGINES 10
Internal combustion engines as automobile power plant – Working principle of Petrol and
Diesel Engines – Four stroke and two stroke cycles – Comparison of four stroke and two
stroke engines – Boiler as a power plant.

UNIT V REFRIGERATION AND AIR CONDITIONING SYSTEM 10

Terminology of Refrigeration and Air Conditioning. Principle of vapour compression and
absorption system – Layout of typical domestic refrigerator – Window and Split type
room Air conditioner.
TOTAL: 30 PERIODS
REFERENCES
1. Shanmugam G and Palanichamy M S, “Basic Civil and Mechanical
Engineering”,Tata McGraw Hill Publishing Co., New Delhi, (1996).
2. Ramamrutham. S, “Basic Civil Engineering”, Dhanpat Rai Publishing Co. (P) Ltd.
(1999).
3. Seetharaman S. “Basic Civil Engineering”, Anuradha Agencies, (2005).
4. Venugopal K and Prahu Raja V, “Basic Mechanical Engineering”, Anuradha
Publishers, Kumbakonam, (2000).
5. Shantha Kumar S R J., “Basic Mechanical Engineering”, Hi-tech Publications,
Mayiladuthurai, (2000).

GE2155 COMPUTER PRACTICE LABORATORY – II L T PC

0 1 2 2
LIST OF EXPERIMENTS

1. UNIX COMMANDS 15

Study of Unix OS - Basic Shell Commands - Unix Editor

2. SHELL PROGRAMMING 15

Simple Shell program - Conditional Statements - Testing and Loops

3. C PROGRAMMING ON UNIX 15

Dynamic Storage Allocation-Pointers-Functions-File Handling

TOTAL: 45 PERIODS

16

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

HARDWARE / SOFTWARE REQUIREMENTS FOR A BATCH OF 30 STUDENTS

Hardware
1 UNIX Clone Server
3 3 Nodes (thin client or PCs)
Printer – 3 Nos.

Software
OS – UNIX Clone (33 user license or License free Linux)
Compiler - C

GS2165 PHYSICS LABORATORY – II L T P C

0 0 3 2

LIST OF EXPERIMENTS

1. Determination of Young’s modulus of the material – non uniform bending.

2. Determination of Band Gap of a semiconductor material.
3. Determination of specific resistance of a given coil of wire – Carey Foster Bridge.
4. Determination of viscosity of liquid – Poiseuille’s method.
5. Spectrometer dispersive power of a prism.
6. Determination of Young’s modulus of the material – uniform bending.
7. Torsional pendulum – Determination of rigidity modulus.

• A minimum of FIVE experiments shall be offered.

• Laboratory classes on alternate weeks for Physics and Chemistry.
• The lab examinations will be held only in the second semester.

GS2165 CHEMISTRY LABORATORY – II L T P C

0 0 3 2

LIST OF EXPERIMENTS

1. Conduct metric titration (Simple acid base)

2. Conduct metric titration (Mixture of weak and strong acids)
3. Conduct metric titration using BaCl vs Na SO
2 2 4
2+
4. Potentiometric Titration (Fe / KMnO or K Cr O )
4 2 2 7
5. PH titration (acid & base)
6. Determination of water of crystallization of a crystalline salt (Copper sulphate)
7. Estimation of Ferric iron by spectrophotometry.

• A minimum of FIVE experiments shall be offered.

• Laboratory classes on alternate weeks for Physics and Chemistry.
• The lab examinations will be held only in the second semester.

17

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

ME2155 COMPUTER AIDED DRAFTING AND MODELING LABORATORY L T P C

01 22

List of Exercises using software capable of Drafting and Modeling

1. Study of capabilities of software for Drafting and Modeling – Coordinate systems

(absolute, relative, polar, etc.) – Creation of simple figures like polygon and general
multi-line figures.

2. Drawing of a Title Block with necessary text and projection symbol.

3. Drawing of curves like parabola, spiral, involute using Bspline or cubic spline.

4. Drawing of front view and top view of simple solids like prism, pyramid, cylinder,
cone, etc, and dimensioning.

5. Drawing front view, top view and side view of objects from the given pictorial views
(eg. V-block, Base of a mixie, Simple stool, Objects with hole and curves).

6. Drawing of a plan of residential building ( Two bed rooms, kitchen, hall, etc.)

7. Drawing of a simple steel truss.

8. Drawing sectional views of prism, pyramid, cylinder, cone, etc,

9. Drawing isometric projection of simple objects.

10. Creation of 3-D models of simple objects and obtaining 2-D multi-view drawings from
3-D model.

TOTAL: 45 PERIODS

Note: Plotting of drawings must be made for each exercise and attached to the
records written by students.

List of Equipments for a batch of 30 students:

1. Pentium IV computer or better hardware, with suitable graphics facility -30 No.
2. Licensed software for Drafting and Modeling. – 30 Licenses
3. Laser Printer or Plotter to print / plot drawings – 2 No.

18

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

EE2155 ELECTRICAL CIRCUIT LABORATORY L T P C

(Common to EEE, EIE and ICE) 0 0 3 2

LIST OF EXPERIMENTS
1. Verification of ohm’s laws and kirchoff’s laws.
2. Verification of Thevemin’s and Norton’s Theorem
3. Verification of superposition Theorem
4. Verification of maximum power transfer theorem.
5. Verification of reciprocity theorem
6. Measurement of self inductance of a coil
7. Verification of mesh and nodal analysis.
8. Transient response of RL and RC circuits for DC input.
9. Frequency response of series and parallel resonance circuits.
10. Frequency response of single tuned coupled circuits.

TOTAL: 45 PERIODS

EC2155 CIRCUITS AND DEVICES LABORATORY L T P C

0 0 3 2

1. Verification of KVL and KCL

2. Verification of Thevenin and Norton Theorems.
3. Verification of superposition Theorem.
4. Verification of Maximum power transfer and reciprocity theorems.
5. Frequency response of series and parallel resonance circuits.
6. Characteristics of PN and Zener diode
7. Characteristics of CE configuration
8. Characteristics of CB configuration
9. Characteristics of UJT and SCR
10. Characteristics of JFET and MOSFET
11. Characteristics of Diac and Triac.
12. Characteristics of Photodiode and Phototransistor.

TOTAL: 45 PERIODS

ENGLISH LANGUAGE LABORATORY (Optional) L T P C

0 0 2 -

1. Listening: 5
Listening & answering questions – gap filling – Listening and Note taking- Listening to
telephone conversations

2. Speaking: 5
Pronouncing words & sentences correctly – word stress – Conversation practice.

19

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CLASSROOM SESSION 20
1. Speaking: Introducing oneself, Introducing others, Role play, Debate-
Presentations: Body language, gestures, postures.
Group Discussions etc
2. Goal setting – interviews – stress time management – situational reasons

EVALUATION
(1) Lab Session – 40 marks
Listening – 10 marks
Speaking – 10 marks
Reading – 10 marks
Writing – 10 marks

(2) Classroom Session – 60 marks

Role play activities giving real life context – 30 marks
Presentation – 30 marks

NOTE ON EVALUATION
1. Examples for role play situations:
a. Marketing engineer convincing a customer to buy his product.
b. Telephone conversation – Fixing an official appointment / Enquiry on
availability of flight or train tickets / placing an order. etc.

2. Presentations could be just a Minute (JAM activity) or an Extempore on

simple topics or visuals could be provided and students could be asked to
talk about it.

REFERENCES:
1. Hartley, Peter, Group Communication, London: Routledge, (2004).
2. Doff, Adrian and Christopher Jones, Language in Use – (Intermediate level),
Cambridge University Press, (1994).
3. Gammidge, Mick, Speaking Extra – A resource book of multi-level skills activities
, Cambridge University Press, (2004).
4. Craven, Miles, Listening Extra - A resource book of multi-level skills activities,
Cambridge, Cambridge University Press, (2004).
5. Naterop, Jean & Rod Revell, Telephoning in English, Cambridge University
Press, (1987).

LAB REQUIREMENTS
1. Teacher – Console and systems for students
2. English Language Lab Software
3. Tape Recorders.

20

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

MA2211 TRANSFORMS AND PARTIAL DIFFERENTIAL EQUATION LTPC

(Common to all branches of BE / B.Tech Programmes) 31 0 4

OBJECTIVES
The course objective is to develop the skills of the students in the areas of Transforms
and Partial Differential Equations. This will be necessary for their effective studies in a
large number of engineering subjects like heat conduction, communication systems,
electro-optics and electromagnetic theory. The course will also serve as a prerequisite
for post graduate and specialized studies and research.

UNIT I FOURIER SERIES 9+3

Dirichlet’s conditions – General Fourier series – Odd and even functions – Half range
sine series – Half range cosine series – Complex form of Fourier Series – Parseval’s
identify – Harmonic Analysis.

UNIT II FOURIER TRANSFORMS 9+3

Fourier integral theorem (without proof) – Fourier transform pair – Sine and
Cosine transforms – Properties – Transforms of simple functions – Convolution theorem
– Parseval’s identity.

UNIT III PARTIAL DIFFERENTIAL EQUATIONS 9 +3

Formation of partial differential equations – Lagrange’s linear equation – Solutions of
standard types of first order partial differential equations - Linear partial differential
equations of second and higher order with constant coefficients.

UNIT IV APPLICATIONS OF PARTIAL DIFFERENTIAL EQUATIONS 9+3

Solutions of one dimensional wave equation – One dimensional equation of heat
conduction – Steady state solution of two-dimensional equation of heat conduction
(Insulated edges excluded) – Fourier series solutions in cartesian coordinates.

UNIT V Z -TRANSFORMS AND DIFFERENCE EQUATIONS 9+3

Z-transforms - Elementary properties – Inverse Z-transform – Convolution theorem -
Formation of difference equations – Solution of difference equations using Z-transform.

L : 45 T : 15 TOTAL : 60 PERIODS

TEXT BOOK
1. Grewal, B.S, “Higher Engineering Mathematic”, 40th Edition, Khanna publishers,
Delhi, (2007)

REFERENCES
1. Bali.N.P and Manish Goyal, “A Textbook of Engineering Mathematic”, 7th Edition,
Laxmi Publications(P) Ltd. (2007)
2. Ramana.B.V., “Higher Engineering Mathematics”, Tata Mc-GrawHill Publishing
Company limited, New Delhi (2007).
3. Glyn James, “Advanced Modern Engineering Mathematics”, 3rd Edition, Pearson
Education (2007).
4. Erwin Kreyszig, “Advanced Engineering Mathematics”, 8th edition, Wiley India (2007).

21

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

ME2205 ELECTRICAL DRIVES AND CONTROLS LTPC

(Common to Mechanical, Production &Technology Faculty) 300 3

OBJECTIVE
 To understand the basic concepts of different types of electrical machines and their
performance.
 To study the different methods of starting D.C motors and induction motors.
 To study the conventional and solid-state drives.

UNIT I INTRODUCTION 8
Basic Elements – Types of Electric Drives – factors influencing the choice of electrical drives –
heating and cooling curves – Loading conditions and classes of duty – Selection of power
rating for drive motors with regard to thermal overloading and Load variation factors

UNIT II DRIVE MOTOR CHARACTERISTICS 9

Mechanical characteristics – Speed-Torque characteristics of various types of load and drive
motors – Braking of Electrical motors – DC motors: Shunt, series and compound - single
phase and three phase induction motors.

UNIT III STARTING METHODS 8

Types of D.C Motor starters – Typical control circuits for shunt and series motors – Three
phase squirrel cage and slip ring induction motors.

UNIT V CONVENTIONAL AND SOLID STATE SPEED CONTROL OF D.C. DRIVES 10

Speed control of DC series and shunt motors – Armature and field control, Ward-Leonard
control system - Using controlled rectifiers and DC choppers –applications.

UNIT V CONVENTIONAL AND SOLID STATE SPEED CONTROL OF A.C.DRIVES10

Speed control of three phase induction motor – Voltage control, voltage / frequency control,
slip power recovery scheme – Using inverters and AC voltage regulators – applications.

TOTAL : 45 PERIODS
TEXT BOOKS
1. Vedam Subrahmaniam, “Electric Drives (concepts and applications)”, Tata McGraw-Hill,
2001
2. Nagrath.I.J. & Kothari.D.P, “Electrical Machines”, Tata McGraw-Hill, 1998

REFERENCES
1. Pillai.S.K “A first course on Electric drives”, Wiley Eastern Limited, 1998
2. M.D.Singh, K.B.Khanchandani, “Power Electronics”, Tata McGraw-Hill, 1998
3. H.Partab, “Art and Science and Utilisation of electrical energy”, Dhanpat Rai and Sons,
1994.

22

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH 2201 ORGANIC CHEMISTRY LT PC

3 00 3

AIM
To study the type of components in which organic reaction are taking place and also to
know the preparation of the essential organic compounds.

OBJECTIVES
At the end of the course students are in a position to have knowledge on various
reaction, Mechanism, preparation of organic compounds classification of the
compounds. This will be a pre cursor for the study on Chemical Reaction Engineering.

UNIT I UNIT PROCESS 9

Definitions – reagents- mechanism – catalyst – illustrations of the following unit process
– nitration – halogenation – oxidation & reduction – esterification.

UNIT II ORGANIC REACTIONS MECHANISM AND ESTIMATION 9

Electrophilic reaction - Friedel craft reaction, Riemer Timenn Reaction; Nucleophilic
reactions - Aldol condensation, Benzion condensation; Free radical reaction -
Halogenation of Alkane, Addition HBR on Alkene in presence of peroxide

UNIT III 9
Alylic halogination using N-Bromo succinamide (NBS); Thermal halogination of Alkane
(CH3-CH=CH); condensation and polymerization reaction – oxidation and reduction
reactions; estimation of some organic compounds – phenol – aniline – acetone - glucose

UNIT IV SYNTHETIC CHEMISTRY 9

synthesis of different types of compounds like alcohol, aldehyde, acid, amine and
synthesis of dicarboylic acids and unsaturated acids.
Synthesis of azodyes –methyl orange and congo dye.
Synthesis of triphenyl methane dyes – alizarin-melachite green

UNIT V AMINO ACIDS AND PROTEINS 9

Amino acids and proteins- classification - synthesis of amino acids - reactions of
carboxyl group and amino group - peptide linkage - end group analysis - colour reaction
of proteins- denaturation.

TOTAL: 45 PERIODS
TEXT BOOK
1. Tiwari K.S. Vishnoi N.K. and Marhotra S.N., A text book of Organic Chemistry, II
Edition , Vikas Publishing House Pvt.Ltd., (1998), New Delhi.

REFERENCE
1. P. H. Groggins Unit processes in organic synthesis. (Third Edition). McGraw-Hill,
New York, 1947.

23

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH 2202 MECHANICS OF SOLIDS L T P C

(Common to Textile Technology & Chemical Engg.) 3 0 0 3

AIM
To given them knowledge on structural, Mechanical properties of Beams, columns.

OBJECTIVES
The students will be able to design the support column, beams, pipelines, storage tanks
and reaction columns and tanks after undergoing this course. This is precursor for the
study on process equipment design and drawing.

UNIT I STRESS, STRAIN AND DEFORMATION OF SOLIDS 9

Rigid bodies and deformable solids – forces on solids and supports – equilibrium and
stability – strength and stiffness – tension, compression and shear stresses – Hooke’s
law and simple problems – compound bars – thermal stresses – elastic constants and
poission’s ratio – welded joints – design.

UNIT II TRANSVERSE LOADING ON BEAMS 9

Beams – support conditions – types of Beams – transverse loading on beams – shear
force and bending moment in beams – analysis of cantilevers, simply – supported
beams and over hanging beams – relationships between loading, S.F. and B.M. In
beams and their applications – S.F.& B.M. diagrams.

UNIT III DEFLECTIONS OF BEAMS 9

Double integration method – Macaulay’s method – Area – moment theorems for
computation of slopes and deflections in beams – conjugate beam method

UNIT IV STRESSES IN BEAMS 9

Theory of simple bending – assumptions and derivation of bending equation (M/I = F/Y =
E/R) – analysis of stresses in beams – loads carrying capacity of beams – proportioning
beam sections – leaf springs – flitched beams – shear stress distribution in beams –
determination of shear stress in flanged beams.

UNIT V TORSION 9
Torsion of circular shafts – derivation of torsion equation (T/J = C/R = G0/L) – stress and
deformation in circular and hollow shafts – stresses and deformation in circular and
hollow shafts – stepped shafts – shafts fixed at both ends – stresses in helical springs –
deflection of springs – spring constant
COLUMNS
Axially loaded short columns – columns of unsymmetrical sections – Euler’s theory of
long columns – critical loads for prismatic columns with different end conditions – effect
of eccentricity.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Junarkar, S.B., Mechanics of Structure Vol. 1, 21st Edition, Character Publishing
House, Anand, Indian, (1995)
2. William A.Nash, Theory and Problems of Strength of Materials, Schaum’s Outline
Series. McGraw Hill International Editions, Third Edition, 1994.

REFERENCE
1. Elangovan, A., Thinma Visai Iyal (Mechanics of Solids in Tamil), Anna University,
Madras, 1995.

24

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2203 FLUID MECHANICS L T P C

3 0 0 3
AIM
To have a general idea about the Mechanism of fluid, fluid flow and flow measuring
devises thro’ basic concepts.

OBJECTIVES
The subject will help the students to have a knowledge on the fluid properties, their
characteristics while abstatic, during flow thro’ ducts, pipes and other channels.
Knowledge on several machineries used to transport the fluid and their performance are
assessed.

UNIT I INTRODUCTION 9
Nature of fluids - laws of dimensional homogeneity – Physical properties of fluids –
Types of fluids-Newtonian and Non Newtonian fluids- viscosity and other secondary
properties – Compressible and incompressible fluids-hydrostatic pressure distributions-
laws of buoyancy Pressure measurements manometers
UNIT II KINEMATICS OF FLUID FLOW 9
Velocity potential, concept of boundary layer, form drag, skin drag-Drag coefficient-
Continuity, momentum and mechanical energy equations; Laminar and turbulent flow
through closed conduits, velocity profiles and friction factor for smooth and rough pipes

UNIT III DIMENSIONAL ANALYSIS AND MEASUREMENT OF FLUID FLOW 9

The principle of dimensional homogeneity - the Pi-theorem - relationship between
dimensional analysis and similitude - use of dimensional analysis for scale up studies-
Orifice meter, Venturimeter, Pitot tube, Rota meter, Weirs and notches- Principles and
applications of Doppler effect in flow measurement

UNIT IV VISCOUS FLOW IN DUCTS AND BOUNDARY LAYER FLOW 9

Reynolds’s number regimes, internal versus external viscous flow, flow in circular pipe -
head loss, minor losses in pipe systems and multiple-pipe systems - functions and
pressure drag - flow through packed and fluidized beds.
UNIT V FLOW MEASUREMENT AND TUBRO MACHINERY 9
Fluid moving machinery performance - selection and specification; Air lift and diaphragm
pump – positive displacement pump – reciprocating and rotary pumps – centrifugal
pump; pump characteristics. Fans, blowers and compressors – steam jet ejector.
TOTAL : 45 PERIODS
TEXT BOOKS
1. McCabe, W.L, Smith J.C and Harriot .P., “Unit Operations in Chemical Engineering”,
Mc-Graw-Hill, Sixth Edition, 2000.
2. Noel de Nevers, “Fluid Mechanics for Chemical Engineers”, Second Edition,
McGraw-Hill, 1991.
REFERENCES
1. Coulson J.M. and Richardson J.E.., Chemical Engineering, Vol. 1 (3rd Edition)
Pergamon Press.
2. Shames, I.H., “Mechanics of Fluids”, Third Edition, McGraw-Hill Inc., 1992.
3. White, F.M., “Fluid Mechanics”, 4th Edition, McGraw-Hill Inc., 1999.
4. Daughenty, R.L., Franzini, J.B and Finnemore, E.J., “Fluid Mechanics with
Engineering Applications”, SI metric Edn., McGraw-Hill Book Company, 1989.
5. Darby, R. Chemical Engineering Fluid Mechanics, Marcel Dokker, 1998.
6. Vennarol, J.K., Street, R.L. Elementary Fluid Mechanics. 6th Edition John Wiley &
Sons. 1982.
25

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GE 2211 ENVIRONMENTAL SCIENCE AND ENGINEERING LTPC

3 003
(Common to EEE, EIE, ICE, Biotech, Chemical, Textile Tech.(Fashion Tech.) / Fashion
Tech., Plastic Tech., Polymer Tech. & Textile Tech.)
OBJECTIVES
 To create an awareness on the various environmental pollution aspects and issues.
 To give a comprehensive insight into natural resources, ecosystem and biodiversity.
 To educate the ways and means to protect the environment from various types of
pollution.
 To impart some fundamental knowledge on human welfare measures.

UNIT I INTRODUCTION TO ENVIRONMENTAL STUDIES AND NATURAL

RESOURCES 10
Definition, scope and importance – need for public awareness – forest resources: use
and over-exploitation, deforestation, case studies. Timber extraction, mining, dams and
their ground water, floods, drought, conflicts over water, dams-benefits and problems –
mineral resources: use effects on forests and tribal people – water resources: use and
over-utilization of surface and exploitation, environmental effects of extracting and using
mineral resources, case studies – food resources: world food problems, changes caused
by agriculture and overgrazing, effects of modern agriculture, fertilizer-pesticide
problems, water logging, salinity, case studies – energy resources: growing energy
needs, renewable and non renewable energy sources, use of alternate energy sources.
Case studies – land resources: land as a resource, land degradation, man induced
landslides, soil erosion and desertification – role of an individual in conservation of
natural resources – equitable use of resources for sustainable lifestyles.
Field study of local area to document environmental assets – river / forest / grassland /
hill / mountain.

UNIT II ECOSYSTEMS AND BIODIVERSITY 14

Concept of an ecosystem – structure and function of an ecosystem – producers,
consumers and decomposers – energy flow in the ecosystem – ecological succession –
food chains, food webs and ecological pyramids – introduction, types, characteristic
features, structure and function of the (a) forest ecosystem (b) grassland ecosystem (c)
desert ecosystem (d) aquatic ecosystems (ponds, streams, lakes, rivers, oceans,
estuaries) – introduction to biodiversity – definition: genetic, species and ecosystem
diversity – biogeographical classification of India – value of biodiversity: consumptive
use, productive use, social, ethical, aesthetic and option values – biodiversity at global,
national and local levels – India as a mega-diversity nation – hot-spots of biodiversity –
threats to biodiversity: habitat loss, poaching of wildlife, man-wildlife conflicts –
endangered and endemic species of India – conservation of biodiversity: in-situ and ex-
situ conservation of biodiversity.
Field study of common plants, insects, birds
Field study of simple ecosystems – pond, river, hill slopes, etc.

UNIT III ENVIRONMENTAL POLLUTION 8

Definition – causes, effects and control measures of: (a) air pollution (b) water pollution
(c) soil pollution (d) marine pollution (e) noise pollution (f) thermal pollution (g) nuclear
hazards – solid waste management: causes, effects and control measures of urban and
industrial wastes – role of an individual in prevention of pollution – pollution case studies
– disaster management: floods, earthquake, cyclone and landslides.
Field study of local polluted site – urban / rural / industrial / agricultural

26

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV SOCIAL ISSUES AND THE ENVIRONMENT 7

From unsustainable to sustainable development – urban problems related to energy –
water conservation, rain water harvesting, watershed management – resettlement and
rehabilitation of people; its problems and concerns, case studies – environmental ethics:
issues and possible solutions – climate change, global warming, acid rain, ozone layer
depletion, nuclear accidents and holocaust, case studies. – wasteland reclamation –
consumerism and waste products – environment protection act – air (prevention and
control of pollution) act – water (prevention and control of pollution) act – wildlife
protection act – forest conservation act – issues involved in enforcement of
environmental legislation – public awareness.

UNIT V HUMAN POPULATION AND THE ENVIRONMENT 6

Population growth, variation among nations – population explosion – family welfare
programme – environment and human health – human rights – value education – hiv /
aids – women and child welfare – role of information technology in environment and
human health – case studies.

TOTAL : 45 PERIODS
TEXT BOOKS
1. Gilbert M.Masters, “Introduction to Environmental Engineering and Science”,
Pearson Education Pvt., Ltd., Second Edition, ISBN 81-297-0277-0, 2004.
2. Miller T.G. Jr., “Environmental Science”, Wadsworth Publishing Co.

REFERENCES
1. Bharucha Erach, “The Biodiversity of India”, Mapin Publishing Pvt. Ltd., Ahmedabad
India.
2. Trivedi R.K., “Handbook of Environmental Laws, Rules, Guidelines, Compliances
and Standards”, Vol. I and II, Enviro Media.
3. Cunningham, W.P.Cooper, T.H.Gorhani, “Environmental Encyclopedia”, Jaico Publ.,
House, Mumbai, 2001.
4. Wager K.D. “Environmental Management”, W.B. Saunders Co., Philadelphia,
USA, 1998.
5. Townsend C., Harper J and Michael Begon, “Essentials of Ecology”, Blackwell
Science.
6. Trivedi R.K. and P.K. Goel, “Introduction to Air Pollution”, Techno-Science
Publications.

CH2207 ORGANIC CHEMISTRY LABORATORY LTPC

0032
OBJECTIVE
To learn basic principles involved in analysis and synthesis of different organic
derivatives.

1. Analysis of nature of organic compounds – To identify aliphatic / aromatic, saturated /

unsaturated compounds.

27

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

2. Identification and Characterization of various functional groups by their characteristic

reactions: a). alcohol, b) aldehyde, c) ketone, d) carboxylic acid, e) phenol, f) ester,
g) primary, secondary and tertiary amines h) amide i) nitro compounds.
3. Analysis of an unknown organic compound and preparation of suitable solid
derivatives.
4. Analysis of Proteins.
5. Methodology of filtrations and recrystallization.
6. Introduction to organic Synthetic procedures:
i. Acetylation – Preparation of acetanilide from aniline.
ii. Hydrolysis – Preparation of salycilic acid from methyl salyciliate.
iii. Substitution – Conversion of acetone to iodoform.
iv. Nitration – Preparation of m-dinitrobenze from nitrobenzene.
v. Oxidation – Preparation of benzoic acid from benzaldehyde /
benzylalcohol.
TOTAL : 45 PERIODS
REFERENCES
1. Vogels’s Text Book of Practical Organic Chemistry, Fifth Edition, Longman
Singapore Publishers Pte. Ltd., Singapore (1989).
2. Organic Chemistry Lab Manual, Chemistry Division, Chemical Engineering
Departemnt, A.C. Tech, Anna University (2007).

CH2208 BASIC ELECTRICAL & ELECTRONICS ENGINEERING LABORATORY

LTPC
0032
AIM
The laboratory course aims to provide a basic understanding of operation and
characteristics of Electrical machines and Electronic devices

OBJECTIVE
Gain knowledge on characteristics of Electrical machines and Electronic Devices

List of Experiments:
1. Open circuit and load test on shunt generators
2. Load test of D.C. shunt motor
3. Load test or single phase induction motor
4. Equivalent circuit of a transformer
5. Swinturn’s test
6. Load test or 3- phase squirrel cage induction motor
7. Load test or 3 –phase slip ring induction motor
8. Diode characteristics
9. Transistor amplifier
10. SCR application
11. Frequency Response Analysis
12. Characteristics of Transducers
TOTAL: 45 PERIODS
List of Equipments
1. Shunt Generators
2. Shunt DC motors
3. Single phase Induction motor
28

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

4. Single phase transformer

5. Three phase Squirrel Cage induction Motors
6. Diodes and Amplifiers
7. Oscilloscope
8. Transducers

CH2209 FLUID MECHANICS LAB LT P C

0 0 3 2

AIM
To determine experimentally the flow characteristics of fluids and also to determine the
efficiency of the flow measuring devices and fluid transport machineries.

OBJECTIVES: To gain practical knowledge on the measurement of Fluid Flow and their
characteristics at different operating conditions.

LIST OF EXPERIMENTS*
1. Calibration of constant and variable Head meters
2. Calibration of Weirs
3. Drag reduction studies
4. Flow through straight pipe
5. Pressure drop studies in packed column
6. Pressure drop studies in Fluidized bed
7. Flow through fittings / valves
8. Open drum orifice and draining time
9. Flow through helical and spiral Coil
10. Characteristic curves of centrifugal pump
11. Characteristic curves of Gear pump
12. Characteristic curves of Reciprocating pump
13. Viscosity measurement of non Newtonian fluids
14. Flow through annular pipe of horizontal concentric pipe

TOTAL: 45 PERIODS
LIST OF EQUIPMENTS REQUIRED
1. Orifice Meter with U tube manometer
2. Venturi meter with U tube Manometer
3. V-notch and circular Notch weirs.
4. Straight pipes with U tube Manometers
5. Packed column with U tube manometer.
6. Fluidized column with U tube manometer.
7. Flow loops for pipes, fittings and valves.
8. Open drum orifice.
9. Helical coil of different diameter.
10. Centrifugal pump with sump and pressure gauge (Vertical discharge & horizontal
discharge).
11. Reciprocating pump with sump and pressure gauge (Vertical discharge &
horizontal discharge).
12. Gear pump with sump and pressure gauge (Vertical discharge & horizontal
discharge).
13. Horizontal double pipe (concentric pipes) with U tube Manometer

Minimum 10 experiments shall be offered
29

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

MA2263 PROBABILITY AND STATISTICS LT P C

(Common to Biotech, Chemical, Fashion, 3 1 0 4
Petroleum, Polymer, Plastic)
OBJECTIVES
At the end of the course, the students would
1. Acquire skills in handling situations involving more than one random variable and
functions of random variables.
2. Be introduced to the notion of sampling distributions and have acquired
knowledge of statistical techniques useful in making rational decision in
management problems.
3. Be exposed to statistical methods designed to contribute to the process of
making scientific judgments in the face of uncertainty and variation.

UNIT I RANDOM VARIABLES 9+3

Discrete and continuous random variables - Properties- Moments - Moment generating
functions and their properties. Binomial, Poisson ,Geometric, Negative binomial,
Uniform, Exponential, Gamma, and Weibull distributions.

UNIT II TWO DIMENSIONAL RANDOM VARIABLES 9+3

Joint distributions - Marginal and conditional distributions – Covariance - Correlation and
Regression – function of a random variable-Transformation of random variables -
Central limit theorem.

UNIT III TESTING OF HYPOTHESIS 9+3

Sampling distributions – Testing of hypothesis for mean, variance, proportions and
differences using Normal, t, Chi-square and F distributions - Tests for independence of
attributes and Goodness of fit.

UNIT IV DESIGN OF EXPERIMENTS 9+3

Analysis of variance – One way classification – CRD - Two – way classification – RBD -
Latin square.

UNIT V RELIABILTY AND QUALITY CONTROL 9+3

Concepts of reliability-hazard functions-Reliability of series and parallel systems- control
charts for measurements (x and R charts) – control charts for attributes (p, c and np
charts)
Note : Use of approved statistical table is permitted in the examination.
TOTAL : 60 PERIODS

TEXT BOOKS
1. J. S. Milton and J.C. Arnold, “ Introduction to Probability and Statistics”, Tata
McGraw Hill, 4th edition, 2007. (For units 1 and 2)
2. R.A. Johnson and C.B. Gupta, “Miller and Freund’s Probability and Statistics for
Engineers”, Pearson Education, Asia, 7th edition, (2007)

REFERENCES
1. Walpole, R. E., Myers, R. H. Myers R. S. L. and Ye. K, “Probability and Statistics for
Engineers and Scientists”, Seventh Edition, Pearsons Education, Delhi, 2002.
2. Navidi, W, “Statistics for Engineers and Scientists”, Special Indian Edition, Tata
McGraw-Hill Publishing Company Ltd, New Delhi,2008.
3. Spiegel, M.R, Schiller, J and Alu Srinivasan, R, “Schaum’s Outlines Probability and
Statistics”, Tata McGraw-Hill Publishing Company Ltd. New Delhi ,2007.

30

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2251 PHYSICAL CHEMISTRY LT P C

3 0 0 3
AIM
To know the basic concepts of physical chemistry aspects of chemical compounds and
their behaviour at different processing conditions.

OBJECTIVES
The students get knowledge on the reactors mechanism. Use of catalyst and also the
reactions stages involved in a particular process operations.
UNIT I CHEMICAL KINETICS 9
Rate equations – order of reaction – I order – II order – III order – zero order – pseudo
order reactions – effect of temperature on reaction rate – concept of activation energy-
chain reactions – branched chain reactions – reactions in solutions – influence of ionic
strength in rates of reactions.

UNIT II ELECTROCHEMISTRY 9
Electrolytic conductance – specific conductance – equivalent conductance – molar
conductance-variation with dilution – kohlrausch’s law- applications of kohlrausch’s law -
molar ionic conductance - conductometric titrations – ostwald dilution law – Debye –
Huckel theory of mean ionic activity coefficient.

UNIT III PHASE RULE AND DISTRIBUTION LAW 9

Definition of terms- one component system – water – sulphur – two component system –
simple eutectic system – reduced phase rule. Distribution-chemical combinations-
applications-applications of distribution law-Raoults law-Henry’s law-ideal and non-ideal
solutions-vapour pressure & boiling point

UNIT IV SURFACE CHEMISTRY 9

ADSORPTION
Definition – types – isotherms – theories of adsorption – BET method – applications.
CATALYSIS
Homogeneous catalysis – acid –base – enzyme catalysis autocatalysis mechanism and
kinetics – Michaelis-Menten equation - Heterogeneous catalysis – kinetics – effect of
temperature on surface reactions
UNIT V MACRO MOLECULES 9
COLLOIDS
Classification – preparations – coagulation – flocculation – determination of size of
particles- surfactants – emulsions – emulsifiers –gels – applications.
POLYMERS
Classification – polymerization reactions – molar masses of reactions – determination of
molar masses- kinetic study.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Puri B.H and Sharma L.R. Principles of Physical Chemistry, S. Nagin Chand and
Company, Delhi (1994)
2. P.L.Soni , O.P. Dharmarha & U.N. Dash, Textbook of Physical Chemistry , Sultan
Chand & Sons.
REFERENCES
1. Kund and Jain, Physical Chemistry, S.Chand and Company, Delhi (1996)
2. Kuriakose, J.C. and Rajaram J, Chemistry in Engineering and Technology Vol. I,
Tata McGraw-Hills.1984.
31

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH 2252 INSTRUMENTAL METHODS OF ANALYSIS LTPC

3 003
AIM
To impart knowledge on various analytical instruments and methods for accurate
chemical analysis.

OBJECTIVES
Several chemical reaction have to be analysed for composition of raw materials,
materials in progress and also the final products. Several sophisticated instruments on
the basic principles involving operation and interpretation of data thro’ the instruments
are obtained by the students.

UNIT I FUNDAMENTALS OF SPECTRAL ANALYSIS 9

ELECTROMAGNETIC RADIATION: Regions and properties, Various energy levels,
Interaction of photons with matter, absorbance, & transmittance and their relationship,
Permitted energy levels for the electrons of an atom and simple molecules, classification
of instrumental methods based on physical properties.;VISIBLE SPECTROSCOPY AND
COLORIMETRY: Beer-Lambert’s Law, Limitations, Deviations (Real, Chemical and
Instrumental deviations) Nesslerimetry, Duboscq colorimetry, Estimation of inorganic ions
such as Fe, Ni and Nitrite using Beer-Lambert’s Law. UV-VISIBLE AND IR
SPECTROSCOPY: Instrumentation (Source, Optical parts and Detectors) - Various
electronic transitions in organic and inorganic compounds effected by UV, Visible and
infra red radiations. Woodward-Fischer rules for the calculation of absorption maxima
(dienes and carbonyl compounds). Effects of auxochromes and effects of conjugation on
the absorption maxima, Multicomponent analysis - Photometric titration

UNIT II ELECTROMETRIC METHODS 9

Conductometric Titrations: Instrumentation-Types-Advantages-Application;
Potentiometric Titrations: Instrumentation-Types-Advantages-Application; Measurement
of pH: Instrumentation-Applications; Ion selective electrodes: Electrode setup-
Applications.; Amperometric titrations: Principle-instrumentation- Application

UNIT III X-RAY DIFFRACTION & THERMAL ANALYSIS METHODS 9

XRD: Introduction, Mosley's law, Different emission and diffraction methods, various X-
ray detectors.
Thermogravimetic Analysis (TGA): Instrumentation, factors affecting the shapes of
thermograms, applications, thermograms of some important compounds (CuSO4, 5H2O,
CaC2O42H2O etc).
Differential thermal analysis (DTA) & Differential Scanning Calorimetry (DSC): Principle,
Instrumentation and applications of DSC and DTA, differences between DSC and DTA.
.
UNIT IV IMPORTANT SPECTROSCOPIC METHODS OF ANALYSIS 9
Atomic Absorption Spectroscopy (AAS): Principle, Instrumentation, Interference and
Applications.
Flame Photometry and Inductively coupled Plasma Atomic Emission spectroscopy( ICP-
AES):
Principle, Instrumentation and Applications. Polarimetry: Principle, Instrumentation and
Applications.
Refractometry: Principle, Instrumentation and Applications. Nephlometry/Turbidimetry:
Principle, Instrumentation and Applications.

32

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT V CHROMATOGRAPHIC METHODS 9

Chromatographic methods - Types (column, Thin layer, paper, Gas, High performance
liquid Chromatographic methods) – principle- separation technique - separation of
organic compounds by column and thin layer, Amino acids and mixture of Cu, Co & Ni
by Paper, estimation of organic compounds by GC and HPLC.
TOTAL: 45 PERIODS

TEXT BOOKS
1. Skoog D.A. and West D.M., " Fundamentals of Analytical Chemistry ", Saunders-
college Publishing, 1982.
2. Willard, H.H., Merritt. I.I., Dean J.a., and Settle, F.A., " Instrumental methods of
analysis ", Sixth edition, CBS publishers, 1986.

REFERENCES
1. A.I.Vogel., "Qualitative Inorganic analysis ", V.Edition, Prentice-Hall of India (P) Ltd.,
New Delhi, 1991.
2. S harma, B.K., " Instrumental Methods of Analysis ", Goel publishing House, 1995.
3. Parikh V.M., " Absorption spectroscopy of organic molecules ", Addison - Wesley
Publishing Company, 1974.

CH 2253 CHEMICAL PROCESS INDUSTRIES I LTPC

3003

AIM
To integrate various courses such as chemistry, unit operations, mechanical operation,
stoichiometry etc., and to give the young chemical engineers some comprehension on
various fields of production into which he will enter or with which he will be affiliated
during the course of study or after completion of the study.

OBJECTIVES
To gain knowledge on various aspects of production engineering and understand the
practical methods of production in a chemical factory.

UNIT I INTRODUCTION AND CHLORO- ALKALI INDUSTRIES 9

The role of a chemical engineers in process industries, Introduction to common devices
used in manufacturing processes, block diagrams, flow charts and standard symbols
used for devices, industrial safety and pollution, outline of plant and equipment design.
Manufacture of Soda ash and sodium bicarbonate, chlorine and caustic soda; bleaching
powder and related bleaching agents, Sodium chloride, By-products of common salt
industry. .

UNIT II SULPHUR AND SULPHURIC ACID INDUSTRIES 9

Mining and manufacture of sulphur, recovery of sulphur from polluting gases, sulphur
trioxide and sulphuric acid, hydrochloric acid, sodium sulphate, sodium thiosulphate.

UNIT III SILICATE INDUSTRIES 9

Types and manufacture of Portland cement, Manufacture of glasses and special
glasses, Ceramics and refractories
33

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV NITROGEN AND PHOSPORUS INDUSTRIES 9

Synthetic ammonia, Nitric acid, Urea, Phosphate rock beneficiation and phosphoric acid

UNIT V FERTILIZER INDUSTRIES 9

Growth elements, functions, ammonium sulphate, ammonium nitrate, ammonium
phosphate, potassium chloride, potassium sulphate, single, triple super phosphate
introduction to pesticides, herbicides and bio-fertilizers.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Austin, G.T.,Shreve’s Chemical Process Industries, Fifth Edition, McGraw-Hill
International Book Co, Singapore, 1984
2. Dryden, C.E., Outlines of Chemicals Technology, Edited and Revised by Gopala
Rao, M. and M.Sittig, Second Edition, Affiliated East-West press, 1993.

REFERENCES
1. Shukla and G.N. Pandey “Text book on Chemical Technology”, Vikas publishing
company 1997
2. Kirk and othmer ,”Encyclopedia of Chemical Technology”, III Edition.

CH2254 CHEMICAL PROCESS CALCULATIONS L T P C

3 0 0 3
AIM
Every chemical reaction involves consumption of Materials and energy. The reactions
are to be balanced with correct quantity of materials and energy to achieve good
percentage of conversion for products. The aim of this course is to give fundamental
knowledge on such material and energy balances.

OBJECTIVES
To make them understand different types of laws of chemistry of materials and also
prepare the students to accurately calculate the Stoichiometric relations between the
materials involved in a physical and chemical reaction.

UNIT I UNITS AND DIMENSIONS 5

Basic and derived units, use of model units in calculations, Methods of expression,
compositions of mixture and solutions.

UNIT II GAS CALCULATIONS 7

Ideal and real gas laws - Gas constant - calculations of pressure, volume and
temperature using ideal gas law. Use of partial pressure and pure component volume in
gas calculations, applications of real gas relationship in gas calculation.

UNIT III MATERIAL BALANCE 7

Stoichiometric principles, Application of material balance to unit operations like
distillation, evaporation, crystallisation, drying etc., - Material balance with chemical
reaction - Limiting and excess reactants - recycle - bypass and purging - Unsteady state
material balances.

34

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV HUMIDITY AND SATURATION 7

Calculation of absolute humidity, molal humidity, relative humidity and percentage
humidity - Use of humidity in condensation and drying - Humidity chart, dew point.

UNIT V FUELS AND COMBUSTION 6

Determination of Composition by Orsat analysis of products of combustion of solid, liquid
and gas fuels - Calculation of excess air from orsat technique, problems on sulphur and
sulphur burning compounds.

UNIT VI THERMO PHYSICS 6

Heat capacity of solids, liquids, gases and solutions, use of mean heat capacity in heat
calculations, problems involving sensible heat and latent heats, evaluation of enthalpy.

UNIT VII THERMOCHEMISTRY 7

Standard heat of reaction, heats of formation, combustion, solution, mixing etc.,
calculation of standard heat of reaction - Effect of pressure and temperature on heat of
reaction - Energy balance for systems with and without chemical reaction. - Unsteady
state energy balances.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Bhatt, B.L., Vora, S.M., “Stoichiometry”, Tata McGraw-Hill, 1976.
2. Himmelblau, D.M., “Basic Principles and Calculations in Chemical Engineering”,
EEE Sixth Edition, Prentice Hall Inc., 2003 (with CD containing programmes and
problems).

REFERENCES
1. Process Calculation for Chemical Engineering, Second Revised Edition,
Chemical Engineering Education Development Centre, I.I.T., Madras, 1981.
2. Process Calculations, Venkataramani, V and Anantharaman, N, Prentice Hall of
India Pvt. Ltd., 2003.

CH 2255 MECHANICAL OPERATIONS LTPC

3 003
AIM
To impart knowledge in separating solids from solids, solids from liquids, reduction of
size, and mixing of solid, solid, liquid – liquid components

OBJECTIVES
The students will be in a position to understand that the industrial processes contain a
coordinated series of separation operations and they will be in a position to decide the
best process needed for a particular process industry.

UNIT I PARTICLE CHARACTERISTICS AND SIZE ANALYSIS 7

General characteristics of solids, their behaviour under different external forces,
agglomeration, techniques for size analysis.

UNIT II SIZE REDUCTION 8

Laws of size reduction, classification of equipment, methods of size reduction,
disintegration, preparation of colloids.
35

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT III MECHANICAL SEPARATIONS 9

Screening and Screening equipment, effectiveness of screens, gravity settling,
sedimentation, thickening, centrifugal separation, impingement methods, industrial dust
removing equipment with special reference to electrostatic and magnetic separators,
heavy media separations, floatation.

UNIT IV FILTRATION 7
Theory of filtration, Batch and continuous filters, centrifuges, membrane and ultra
filtration.

UNIT V MIXING AND AGITATION 7

Equipment for blending and kneading, dispersion, power for agitation, correlations.

UNIT VI STORAGE AND CONVEYING OF SOLIDS 7

Conveyors, Elevators, Pneumatic conveying, Different methods for storage of solids.

TOTAL : 45 PERIODS
TEXT BOOKS
1. McCabe, W.L, Smith J.C and Harriot, P., “Unit Operations in Chemical
Engineering”, McGraw-Hill, Fourth Edition, 1984.
2. Coulson, J.M., Richardson, J.F., “Chemical Engineering”, Volume 2, Third
Edition, Pergamon Press, 1977.

CH2257 CHEMICAL ANALYSIS LAB L T P C

0 0 3 2

OBJECTIVE
To learn basic principles involved in estimation and characterization of industrially
important materials.

I. Soap Analysis
a. Estimation of total fatty acid.
b. Estimation of percentage alkali content.

II. Oil Analysis

a. Estimation of free acid
b. Determination of Saponification value
c. Determination of iodine value

III. Cement Analysis

a. Estimation of Silica content
b. Estimation of mixed oxide content
c. Estimation calcium oxide content
d. Estimation of calcium oxide by rapid method

IV. Coal Analysis

a. Estimation of Sulphur present in coal
b. Ultimate analysis of coal
c. Proximate analysis of coal
36

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

V. Analysis of Bleaching Power

a. Estimation of Available Chlorine

VI. Analysis of Glycerol

a. Estimation of purity of glycerol

VII. Analysis of fuels

a. Flash point
b. Fire point
c. Cloud point
d. Pour point
e. Aniline point
TOTAL : 45 PERIODS
REFERENCES
1. Technical Analysis Manual, Chemistry Division, Chemical Engineering Department,
A.C. Tech. Anna University (2007).
2. Hand book of Chemical Analysis by Griffin.

CH 2258 PHYSICAL CHEMISTRY LAB L T P C

0 0 3 2
AIM
To determine experimentally various properties of the chemical compounds and to
determine and estimate kinetics values, and other properties of chemicals.
OBJECTIVES : To improve the practical knowledge on the properties and
characteristics of solvents and mixtures.

LIST OF EXPERIMENTS
1. Determination of molecular weight of a polymer by viscosity method.
2. Determination of partition co-efficient of iodine between two immiscible solvents
3. Determination of partition co-efficient of benzoic acid between two immiscible
solvents
4. Determination of Ka of the weak acid
5. Conductometric experiments- Verification of Oswald’s Dilution Law
6. Titration of Strong Acid Vs Strong Base
7. Titration of mixture of Strong Acid Weak Acid Vs Strong Base
8. Titration of Weak Acid Vs Weak Base
9. Determination of Rate Constant (K)
10. Determination of Activation Energy (ΔE)
11. Estimation of Ferrous ion concentration by Potentiometric Titration
12. Determination of standard electrode potential (Zn, Cu, Ag)
13. Adsorption studies
14. To study the adsorption of Acetic acid on charcoal and construct the isotherm.
15. Determination of pH metric titration of Strong Acid Vs Strong Base
16. Enzyme catalytic reaction by varying pH.
17. Application of Phase Rule to Phenol-Water system
18. To study the inversion of cane sugar by polarimeter.
a. Polarimeter-Inversion of cane sugar
b. Refractometer
TOTAL: 45 PERIODS
37

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

REFERENCE BOOK :
1. Physical Chemistry experiments by Alexander Findley, McGraw-Hill IV Edition,
(1976).
LIST OF EQUIPMENTS
1. Micro Calorimeter
2. Beckman Thermometers. Glasswares,
3. Thermometers 0 to 110 – 0°. Bottle Shakers .pH meters
4. Pressure Glass bottles. Standard Cells. Multimeters
5. Viscometers-Ostwald Cannan Ubbelholde. Voltage Stabiliser
6. Stalalmometer
7. Surface Tension Meter .Tape Heaters
8. Mantle Heaters
9. DC Power Supply. Thermostat. Cyrostats

CH2259 MECHANICAL OPERATIONS LAB L T P C

0 0 3 2
AIM
To impart practical knowledge and have on experience on various separation
techniques.
LIST OF EXPERIMENTS
1. Study of crushing strength of solid materials using jaw crusher
2. Study of crushing strength of solid materials using crushing rolls
3. Study of crushing strength of solid materials using ball mill
4. Taylor sieves
5. Layer sieves
6. Study of characterization of filtration using to Filter Press.
7. Study of characterization of solid materials using leaf Filter.
8. Study of separation of fine particles using cyclone separator.
9. Study of separation of fine particles using sedimentation
10. Study of separation of fine particles using Elutriator.
11. Study of separation of solid particles using drum Filter.
12. Study of separation of fine particles using screens and determination of effectiveness
of factor.

LIST OF EQUIPMENTS
1. Jaw crusher
2. Crushing rolls
3. Ball mill
4. Taylor sieving
5. Layer sieving
6. Filter press
7. Leaf filter
8. Cyclone separator
9. 2 liter and one liter Glass Jars, Stop Clock.
10. Elutriator
11. Rotary Drum filter
12. Screens of various mesh sizes.
* Minimum experiments shall be offered.
TOTAL : 45 PERIODS
38

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

MA2264 NUMERICAL METHODS L T P C

3 1 0 4

AIM
With the present development of the computer technology, it is necessary to develop
efficient algorithms for solving problems in science and engineering. This course gives a
complete procedure for solving different kinds of problems occur in Engineering
numerically.

OBJECTIVES
At the end of the course, the students would be acquainted with the basic concepts in
numerical methods. The uses of numerical methods are summarized as follows:
 The roots of nonlinear (algebraic or transcendental) equations which arise in
engineering applications can be obtained numerically where analytical methods
fail to give solution. Solutions of large system of linear equations are also
obtainable using the different numerical techniques discussed. The Eigen value
problem is one of the important concepts in dynamic study of structures.
 When huge amounts of experimental data are involved in some engineering
application, the methods discussed on interpolation will be useful in constructing
approximate polynomial to represent the data and to find the intermediate values.
 The numerical differentiation and integration find application when the function in
the analytical form is too complicated or the huge amounts of data are given such
as series of measurements, observations or some other empirical information.
 Many physical laws are couched in terms of rate of change of quantity. Therefore
most of the engineering problems are characterized in the form of nonlinear
ordinary differential equations. The methods introduced in the solution of ordinary
differential equations will be useful in attempting any engineering problem.
 When the behavior of a physical quantity is expressed in terms of rate of change
with respect to two or more independent variables, the problem is characterized
as a partial differential equation. The knowledge gained may be used in solving
any problem that has been modeled in the form of partial differential equation.

UNIT I SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS 9+3

Linear interpolation methods (method of false position) – Newton’s method - Fixed point
iteration: x=g(x) method - Solution of linear system by Gaussian elimination and Gauss-
Jordon methods- Iterative methods: Gauss Jacobi and Gauss-Seidel methods- Inverse
of a matrix by Gauss Jordon method – Eigenvalue of a matrix by power method.

UNIT II INTERPOLATION AND APPROXIMATION 9+ 3

Lagrangian Polynomials – Divided differences – Interpolating with a cubic spline –
Newton’s forward and backward difference formulas.

UNIT III NUMERICAL DIFFERENTIATION AND INTEGRATION 9+ 3

Derivatives from difference tables – Divided differences and finite differences –
Numerical integration by trapezoidal and Simpson’s 1/3 and 3/8 rules – Romberg’s
method – Two and Three point Gaussian quadrature formulas – Double integrals using
trapezoidal and Simpson’s rules.

UNIT IV INITIAL VALUE PROBLEMS FOR ORDINARY DIFFERENTIAL

EQUATIONS 9+ 3
Single step methods: Taylor series method – Euler and modified Euler methods – Fourth
order Runge – Kutta method for solving first and second order equations – Multistep
methods: Milne’s and Adam’s predictor and corrector methods.
39

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT V BOUNDARY VALUE PROBLEMS IN ORDINARY AND PARTIAL

DIFFERENTIAL EQUATIONS 9+ 3
Finite difference solution of second order ordinary differential equation – Finite difference
solution of one dimensional heat equation by explicit and implicit methods – One
dimensional wave equation and two dimensional Laplace and Poisson equations.

L : 45 T :15 TOTAL : 60 PERIODS

TEXT BOOKS
1. Gerald, C.F, and Wheatley, P.O, “Applied Numerical Analysis”, Sixth Edition,
Pearson Education Asia, New Delhi, 2002.
2. Balagurusamy, E., “Numerical Methods”, Tata McGraw-Hill Pub. Co. Ltd., New
Delhi, 1999.

REFERENCES
1. Kandasamy, P., Thilagavathy, K. and Gunavathy, K., “Numerical Methods”, S.Chand
Co. Ltd., New Delhi, 2003.
2. Burden, R.L and Faires, T.D., “Numerical Analysis”, Seventh Edition, Thomson Asia
Pvt. Ltd., Singapore, 2002.

CH2301 MATERIALS TECHNOLOGY L T P C

3 0 0 3
AIM
To impart knowledge in material properties and manufacturing methods.

OBJECTIVES
 Students will be able to understand various material and its properties and
manufacturing methods.

UNIT I INTRODUCTION 10
Selection criteria and processes: General criteria of selection of materials in process
industries. Properties: Mechanical, Thermal, Chemical, Electrical, Magnetic and
Technological properties. Processing of metals and alloys-Casting-hot and cold rolling-
forging-extrusion-deep drawing.

UNIT II FERROUS AND NON-FERROUS METALS 10

Pure iron, cast iron, mild steel, stainless steels, special alloy steels- iron and iron carbide
phase diagram-heat treatment of plain-carbon steels.Manufacturing methods of Lead,
Tin and Magnesium. Properties and applications in process industries

UNIT III POLYMERS, COMPOSITES, CERAMICS AND INORGANIC

MATERIALS 10
(i) Industrial polymerization methods, crystallinity and stereo isomers- Thermosetting
and Thermo plastics.
(ii) FRP-Fiber Reinforced Plastics (FRP), different types of manufacturing methods;
asphalt and asphalt mixtures; wood.
(iii) Ceramic crystal and silicate structures-processing of ceramics- cements-glasses-
enamels-properties.
(iv) Cement and its properties-manufacturing of cement, special cements, cement
concrete, RCC- Pre stressed concrete.
40

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV ADVANCED MATERIALS 7

Single crystals-production-properties-applications-memory metals-Intelligent materials
some important metallic and non-metallic single crystals.

UNIT V CORROSION AND PREVENTION 8

Definition of corrosion-Basic theories and mechanism of corrosion-Types of corrosion
Anti-Corrosion methods-Organic paints and coatings metal, ceramic coatings.

TOTAL : 45 PERIODS
TEXT BOOKS
1. Budinsky K G and Budinsky K M “ Engineering materials- Properties and Selection”
Prentice Hall of India (2002).
2. Khanna O P, “Material Science and metallurgy” Dhnapat Rai Publications (1995).

REFERENCE
1. Henry R Clauster, “Industrial and Engineering materials” McGraw Hill Book Co.
(1975).

CH2302 CHEMICAL PROCESS INDUSTRIES II L T P C

3 0 0 3

AIM
To integrate various courses such as chemistry, unit operations, mechanical operation,
stoichiometry etc., and to give the young chemical engineers some comprehension on
various fields of production into which he will enter or with which he will be affiliated
during the course of study or after completion of the study.

OBJECTIVES
 To gain Knowledge on various aspects of production engineering and understand
the practical methods of production in a chemical factory.

UNIT I PULP AND PAPER INDUSTRIES AND SUGAR AND STARCH

INDUSTRIES 9
Wood and Wood extracts – Wood Chemicals - Cellulose derivatives, Manufacture of
pulp – different processes of pulping – Manufacture of paper – Manufacture of Boards
Raw and refined sugar, by products of sugar industries, Starch and starch derivatives.

UNIT II OILS, FATS, SOAPS AND DETERGENT INDUSTRIES 9

Vegetable oils and animal fats, their nature, analysis and extraction methods,
hydrogenation of oils, fatty acids and alcohols, waxes, soaps, synthetic detergents.

UNIT III PETROLEUM AND PETROCHEMICAL INDUSTRIES 9

Petroleum refining, physical and chemical conversion products, lubricating oils,
petrochemical precursors, methane, olefines, acetylenes and aromatics and products
obtained from them by various unit processes.

41

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV RUBBER AND POLYMERS 9

Monomers – Thermosetting and Thermoplastic materials – General properties and
Applications of Resins – Polymerization processes – different types - Natural rubber;
Synthetic rubber such as SBR, NBR, CR - Fundamental methods of processing of
synthetic Rubbers.

UNIT V SYNTHETIC FIBRE AND FILM INDUSTRIES 9

Natural and synthetic fibres – properties of - Poly amides – manufacture of Nylon 6. 6.
Polyesters Fibres – manufacturer of – Cellulosic Fibres – Viscose Rayon production
manufacture of films - cellulose Acetate, PVC, Polyesters - polyethylene

TOTAL : 45 PERIODS
TEXTBOOKS
1. “Shreve's Chemical Process Industries Handbook”, Fifth Edition, McGraw-Hill 1998.
2. Dryden, C.E., “Outlines of Chemical Technology”, Edited and Revised by Gopala
Rao. M. and M.Sittig, Second edition, Affiliated East-West press, 1993.

REFERENCES
1. “Kent and Riegel's Hand Book of Industrial Chemistry and Biotechnology”, Springer ,
XI Edition, 2007.

.
CH 2303 CHEMICAL ENGINEERING THERMO DYNAMICS I L T P C
3 0 0 3
AIM
To present thermodynamic principles from a chemical engineering viewpoint.

OBJECTIVES
 The Students will be well versed with the behavior of fluids under PVT conditions and
also apply them for practical purpose. Main advantage will be to deal with power
production and refrigeration processes. The study further provides a comprehensive
exposition to theory and application of solution thermodynamics.

UNIT I BASIC CONCEPTS 6

The terminologies of thermodynamics, the variables and quantities of thermodynamics,
categorization of systems and processes. Energy classifications, point and path
properties, energy in transition, heat and work, reversible and irreversible processes,
phase rule.

UNIT II LAWS OF THERMODYNAMICS 12

The first law and internal energy, statements of first law for the non flow and flow
systems, enthalpy and heat capacity limitations of the first law.
Statements of the second law of thermodynamics, available and unavailable energies,
and the entropy function, applications of the second law.

UNIT III THERMODYNAMIC PROPERTIES OF REAL GASES 9

The PVT behavior of fluids, laws of corresponding states and equation of states
approaches to the PVT relationships of non ideal gas, problems; compressibility factors,
generalized equations of state, property estimation via generalized equation of state;
fugacity and fugacity coefficients of real gases.
42

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV THERMODYNAMIC FORMULATIONS 9

Measurable quantities, basic energy relations, Maxwell relations, thermodynamic
formulations to calculate enthalpy, internal energy and entropy as function of pressure
and temperature, other formulations involving Cp and Cv, complex thermodynamic
formulations, thermodynamic properties of an ideal gas, entropy change in reversible
and irreversible process.

UNIT V COMPRESSION OF FLUIDS 9

Thermodynamic aspects of compression process, classification of compression
processes, basic equation for change of state of gases, the work expression for different
situations, the effect of clearance volume, multistage compression, convergent divergent
flow, Ejectors.

TOTAL : 45 PERIODS
TEXT BOOKS
1. Smith, J.M., VanNess, H.C., & Abbot M.C, “Introduction to Chemical Engineering
Thermodynamics”, McGraw Hill VII Edition 2004.
2. Narayanan K.V “A Text Book of Chemical Engineering Thermodynamics” Prentice
Hall of India Pvt. Ltd. 2001.

REFERENCES
1. Hougen, O.A., Watson, K.M., and Ragatz, R.A., “Chemical Process Principles Part
II, Thermodynamics”, John Wiley 1970.
2. Dodge, B.F., “Chemical Engineering Thermodynamics”, McGraw-Hill, 1960.
3. Sandler, S.I., “Chemical and Engineering Thermodynamics 2nd edn.”, Wiley, 1989.
4. Kyle, B.G., “Chemical and Process Thermodynamics 2nd edn.”, Prentice Hall of
India Pvt. Ltd., 1990.

CH2304 HEAT TRANSFER L T P C

3 0 0 3
AIM
To impart basic concepts of heat transfer thro’ different media.

OBJECTIVES
 To gain knowledge in various heat transfer methodology in process engineering and
to design heat transfer equipments such as furnace, boilers, heat exchangers
evaporation etc.,

UNIT I HEAT TRANSFER BY CONDUCTION 9

Importance of heat transfer in Chemical Engineering operations - Modes of heat transfer
- Mean temperature difference.
Concept of heat conduction - Fourier's law of heat conduction - one dimensional steady
state heat conduction equation for flat plate, hollow cylinder, hollow sphere - Heat
conduction through a series of resistances - Analogy between flow of heat and flow of
electricity - Thermal conductivity measurement; effect of temperature on thermal
conductivity; conduction through liquids.

43

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT II FILM COEFFICIENTS AND THEIR APPLICATION 9

Individual and overall heat transfer coefficients and the relationship between them -
Conduction with heat source - Two dimensional steady state conduction - Analytical and
graphical methods - Transient heat conduction.

UNIT III CONVECTION 9

Concept of heat transfer by convection - Natural and forced convection - Application of
dimensional analysis for convection - Equations for forced convection under laminar,
transition and turbulent conditions - Equations for natural convection - Heat transfer from
condensing vapors, heat transfer to boiling liquids - Influence of boundary layer on heat
transfer - Heat transfer to molten metals - Heat transfer in packed and fluidized beds.

UNIT IV HEAT EXCHANGERS 8

Parallel and counter flow heat exchangers - Log mean temperature difference - Single
pass and multipass heat exchangers; plate heat exchangers; use of correction factor
charts; heat exchangers effectiveness; number of transfer unit - Chart for different
configurations - Fouling factors and Wilson’s plot - Design of various types of heat
exchangers - Design of furnaces - Design of condensers, - Design of tubular reactors.

UNIT V RADIATION AND EVAPORATION 9

Concept of thermal radiations - Black body concept - Stefan Boltzmann’s law -concept of
grey body – radiation between surfaces.
Types of evaporation - single effect and multiple effect evaporation - Design calculation
for single and multiple effect evaporation.
TOTAL : 45 PERIODS
TEXT BOOKS
1. McCabe, W.L., Smith, J.C., and Harriot, P., “Unit Operations in Chemical
Engineering”, McGraw-Hill VII Edition 2004.
2. Binay K.Dutta “Heat Transfer Principles and Applications”, Prentice Hall of India,
2001.

REFERENCES
1. Harker J Coulson, J.M., Richardson, J.F., Backhurst J “Chemical Engineering”, Vol.
I., Butterworth Heinman 1996.
2. Kern, D.Q., “Process Heat Transfer”, McGraw-Hill - Revised adition - 1999.

CH2305 MASS TRANSFER I L T P C

3 0 0 3

AIM
To impart knowledge on how certain substances undergo the change in composition,
change in phases and exhibit the properties according to the changed environment.

OBJECTIVES
 Students develop a sound knowledge on the types of Mass Transfer thro’ a driving
force in the same fashion as temperature differences as driving force for heat
transfer. The students shall have an elementary knowledge on fluid flow, heat
transfer and stoichiometry.
44

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT I DIFFUSION 8
Molecular and eddy diffusion in gases and liquids, steady state diffusion under stagnant
and laminar flow conditions Diffusivity measurement and prediction, multicomponent
diffusion, diffusion in solids and its applications.

UNIT II MASS TRANSFER COEFFICIENTS 12

Concept of mass transfer coefficients, mass transfer under laminar and turbulent flow
past solids, boundary layers, mass transfer at fluids surfaces correlation of mass transfer
coefficients, JD, HTU, and NTU concepts, theories of mass transfer and their
applications, interphase mass transfer and over all mass transfer coefficients in binary
and multicomponent systems, application to gas-liquid and liquid-liquid systems.

UNIT III HUMIDIFICATION AND AIR CONDITIONING 8

Basic concepts, psychrometric chart construction, Humidification and dehumidification
operations, and design calculations, cooling tower principle and operation, types of
equipment, design calculation.

UNIT IV DRYING 9
Theory and mechanism of drying, drying characteristics of materials, batch and
continuous drying, calculation for continuous drying, drying equipment, design and
performance of various drying equipments.

UNIT V CRYSTALLISATION 8
Nuclei formation and crystal growth, theory of crystallization, growth coefficients and the
factors affecting these in crystallization, batch and continuous industrial crystallizers,
principle of design of equipment.
TOTAL : 45 PERIODS
TEXT BOOKS
1. R.E.Treybal, “Mass Transfer Operations”, McGraw-Hill III Edition, 1980.
2. McCabe, W.L., Smith, J.C., and Harriot, P., “Unit Operations in Chemical
Engineering”, McGraw-Hill VII Edn., 2004.

REFERENCES
1. Harker J Coulson, J.M., Richardson, J.F., Backhurst J “Chemical Engineering”, Vol.
I., Butterworth Heinman 1996.
2. Foust, A.S.Wenzel, L.A., Clump, C.W., Naus, L., and Anderson, L.B., “Principles of
Unit Operations”, Second Edition, Wiley, 1980.
3. Roman Zarzytci, Andrzai Chacuk, “Absorption: Fundamentals and Application”,
Pergamon Press, 1993.
4. Skelland, A.H.P., “Diffusional Mass Transfer”, Krieger, Malabar FL (1985).

45

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

GE2321 COMMUNICATION SKILLS LABORATORY L T P C

(Fifth / Sixth Semester) 0 0 4 2

Globalization has brought in numerous opportunities for the teeming millions, with more
focus on the students’ overall capability apart from academic competence. Many
students, particularly those from non-English medium schools, find that they are not
preferred due to their inadequacy of communication skills and soft skills, despite
possessing sound knowledge in their subject area along with technical capability.
Keeping in view their pre-employment needs and career requirements, this course on
Communication Skills Laboratory will prepare students to adapt themselves with ease to
the industry environment, thus rendering them as prospective assets to industries. The
course will equip the students with the necessary communication skills that would go a
long way in helping them in their profession.

OBJECTIVES
 To equip students of engineering and technology with effective speaking and
listening skills in English.
 To help them develop their soft skills and interpersonal skills, which will make the
transition from college to workplace smoother and help them excel in their job.
 To enhance the performance of students at Placement Interviews, Group
Discussions and other recruitment exercises.

I. PC based session (Weightage 40%) 24 periods

A.ENGLISH LANGUAGE LAB (18 Periods)

1.LISTENING COMPREHENSION: (6)

Listening and typing – Listening and sequencing of sentences – Filling in the blanks -
Listening and answering questions.

2. READING COMPREHENSION: (6)

Filling in the blanks - Close exercises – Vocabulary building - Reading and answering
questions.

3.SPEAKING (6)
Phonetics: Intonation – Ear training - Correct Pronunciation – Sound recognition
exercises – Common Errors in English.

Conversations: Face to Face Conversation – Telephone conversation – Role play

activities (Students take on roles and engage in conversation)

B. DISCUSSION OF AUDIO-VISUAL MATERIALS (6 PERIODS)

(Samples are available to learn and practice)

1. RESUME / REPORT PREPARATION / LETTER WRITING (1)

Structuring the resume / report - Letter writing / Email Communication - Samples.

2. PRESENTATION SKILLS: (1)

Elements of effective presentation – Structure of presentation - Presentation
tools – Voice Modulation – Audience analysis - Body language – Video samples
46

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

3. SOFT SKILLS: (2)

Time management – Articulateness – Assertiveness – Psychometrics –
Innovation and Creativity - Stress Management & Poise - Video Samples

4. GROUP DISCUSSION: (1)

Why is GD part of selection process ? - Structure of GD – Moderator – led and
other GDs - Strategies in GD – Team work - Body Language - Mock GD -Video
samples

5. INTERVIEW SKILLS: (1)

Kinds of interviews – Required Key Skills – Corporate culture – Mock interviews-
Video samples.

II. Practice Session (Weightage – 60%) 24 periods

1. Resume / Report Preparation / Letter writing: Students prepare their (2)

Own resume and report.
2. Presentation Skills: Students make presentations on given topics. (8)
3. Group Discussion: Students participate in group discussions. (6)
4. Interview Skills: Students participate in Mock Interviews (8)

REFERENCES
1. Anderson, P.V, Technical Communication, Thomson Wadsworth , Sixth
Edition, New Delhi, 2007.

2. Prakash, P, Verbal and Non-Verbal Reasoning, Macmillan India Ltd., Second

Edition, New Delhi, 2004.

3. John Seely, The Oxford Guide to Writing and Speaking, Oxford University
Press, New Delhi, 2004.

4. Evans, D, Decisionmaker, Cambridge University Press, 1997.

5. Thorpe, E, and Thorpe, S, Objective English, Pearson Education,

Second Edition, New Delhi, 2007.

6. Turton, N.D and Heaton, J.B, Dictionary of Common Errors, Addision Wesley
Longman Ltd., Indian reprint 1998.

LAB REQUIREMENT

1. Teacher console and systems for students.

2. English Language Lab Software
3. Career Lab Software

Guidelines for the course

GE2321 COMMUNICATION SKILLS LABORATORY

A batch of 60 / 120 students is divided into two groups – one group for the PC- based
session and the other group for the Class room session.
47

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

The English Lab (2 Periods) will be handled by a faculty member of the English
Department. The Career Lab (2 Periods) may be handled by any competent teacher,
not necessarily from English Department

Record Notebook: At the end of each session of English Lab, review exercises are
given for the students to answer and the computer evaluated sheets are to be compiled
as record notebook. Similar exercises for the career lab are to be compiled in the record
notebook.

Internal Assessment: The 15 marks (the other 5 marks for attendance) allotted for the
internal assessment will be based on the record notebook compiled by the candidate.
10 marks may be allotted for English Lab component and 5 marks for the Career Lab
component.

End semester Examination: The end-semester examination carries 40% weightage for
English Lab and 60% weightage for Career Lab.

Each candidate will have separate sets of questions assigned by the teacher using the
teacher-console enabling PC–based evaluation for the 40% of marks allotted.

The Career Lab component will be evaluated for a maximum of 60% by a local
examiner & an external examiner drafted from other Institutions, similar to any other lab
examination conducted by Anna University.

Requirement for a batch of 60 students

Quantity
Sl.No. Description of Equipment
required
1. Server
o PIV system
o 1 GB RAM / 40 GB HDD
o OS: Win 2000 server 1 No.
o Audio card with headphones (with
mike)
o JRE 1.3
2. Client Systems
o PIII or above
o 256 or 512 MB RAM / 40 GB
HDD
60 No.
o OS: Win 2000
o Audio card with headphones (with
mike)
o JRE 1.3
3. Handicam Video Camera (with video lights
1 No.
and mic input)
4. Television - 29” 1 No.
5. Collar mike 1 No.
6. Cordless mikes 1 No.
7. Audio Mixer 1 No.
8. DVD Recorder / Player 1 No.
9. LCD Projector with MP3 /CD /DVD provision
1 No.
for audio / video facility - Desirable
48

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2307 TECHNICAL ANALYSIS LAB L T P C

0 0 3 2

AIM
To determine experimentally the various elements and compounds used in chemical
engineering

OBJECTIVES
 To have a thorough understanding on the estimation and analysis of chemical
compounds.

LIST OF EXPERIMENTS

1. Ore Analysis
 Estimation of manganese in pyrolusite ore.
 Estimation of magnesium in dolomite.
2. Analysis of alloys .
3. Analysis of fertilizer.
 Estimation of nitrogen in urea by kjeldal method.
4. Sugar Analysis .
5. Estimation of phenol by Iodimetry / UV-Vis Spectrometer.
6. Water Analysis
 Determination of total residual chlorine in water.
 Determination of chemical oxygen demand.
 Determination of dissolved oxygen.
7. Polymer analysis .
8. Conductometric Titration.
9. Potentiometry.
 Estimation of iron.
 Determination of standard – electrode potential of Zn , Fe , Copper.
10. Estimation of sodium and potassium by flame photometry.
11. Gravimetric analysis
 Estimation of barium in barium sulphate.
 Estimation of nickel as DMG.
12. pH metry (acid – basic titration ) – not basic.

* Minimum 10 experiments shall be offered TOTAL : 45 PERIODS

INSTRUMENTS REQUIRED

1. UV/Vis Spectrophotometer
2. Colorimeter
3. pH meter
4. Flame photometer
5. Conductivity meter
6. Glass electrodes
7. Kjeldal’s apparatus
8. Potentiometer

49

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2308 HEAT TRANSFER LABORATORY L T P C

0 0 3 2

AIM
To determine experimentally the heat transfer coefficient of different fluid in different
equipments.

OBJECTIVES
 To have a wide knowledge on the conductive, convective and radiative type of heat
transfer under different operative conditions and also the selection of instruments to
measure the heat.

LIST OF EXPERIMENTS
1. Laminar Flow
2. Condenser (Vertical)
3. Condenser (Horizontal)
4. Convective Heat Transfer
5. Transient Heat Conduction
6. Agitated vessel
7. Natural Convection
8. Jacketed Kettle
9. Sreafan Boltzman experiment – Radiation.
10. Open Pan Evaporator
11. Characteristics of Temperature Measuring Device

* Minimum 10 experiments shall be offered

TOTAL : 45 PERIODS

LIST OF EQUIPMENT
1. Data Loger
2. Heat Exchanger
3. Condenser
4. Stirrers
5. Jacketed Kettle
6. Pan Evaporator
7. Mini Boiler
8. Controllers for Temperature
9. Temperature Measuring Devices

CH2351 CHEMICAL ENGINEERING THERMODYNAMICS II L T P C

3 1 0 4
AIM
To present thermodynamic principles from a chemical engineering viewpoint.

OBJECTIVES
 The Students will be well versed with the behavior of fluids under PVT conditions and
also apply them for practical purpose. Main advantage will be to deal with power
production and refrigeration processes. The study further provides a comprehensive
exposition to theory and application of solution thermodynamics.

50

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT I PROPERTIES OF SOLUTIONS 10

Partial molar properties, ideal and non-ideal solutions, standard states definition and
choice, Gibbs-Duhem equation, excess properties of mixtures.

UNIT II PHASE EQUILIBRIA 14

Criteria for equilibrium between phases in multi component non-reacting systems in
terms of chemical potential and fugacity, application of phase rule, vapour-liquid
equilibrium, phase diagrams for homogeneous systems and for systems with a
miscibility gap, effect of temperature and pressure on azeotrope composition, liquid-
liquid equilibrium, ternary liquid-liquid equilibrium.

UNIT III CORRELATION AND PREDICTION OF PHASE EQUILIBRIA 12

Activity coefficient-composition models, thermodynamic consistency of phase equilibria,
application of the correlation and prediction of phase equilibria in systems of engineering
interest particularly to distillation and liquid extraction processes.

UNIT IV CHEMICAL REACTION EQUILIBRIA 14

Definition of standard state, standard free energy change and reaction equilibrium
constant, evaluation of reaction equilibrium constant, prediction of free energy data,
equilibria in chemical reactors, calculation of equilibrium compositions for homogeneous
chemical reactors, thermodynamic analysis of simultaneous reactions.

UNIT V REFRIGERATION 10
Principles of refrigeration, methods of producing refrigeration, liquefaction process, co-
efficient of performance, evaluation of the performance of vapour compression and gas
refrigeration cycles.
L : 45, T : 15 , TOTAL: 60 PERIODS
TEXT BOOKS
1. Smith, J.M., VanNess, H.C., & Abbot M.C, “Introduction to Chemical Engineering
Thermodynamics”, McGraw Hill VII Edition 2004.
2. Narayanan K.V “A Text Book of Chemical Engineering Thermodynamics” Prentice
Hall of India Pvt. Ltd. 2001.

REFERENCES
1. Hougen, O.A., Watson, K.M., and Ragatz, R.A., “Chemical Process Principles
Part II”, Thermodynamics, John Wiley, 1970.
2. Dodge, B.F., “Chemical Engineering Thermodynamics”, McGraw-Hill, 1960.
3. Sandler, S.I., “Chemical and Engineering Thermodynamics”, 2nd Edition, Wiley,
1989.

CH2352 MASS TRANSFER II L T P C

3 0 0 3
AIM
To impart knowledge on how certain substances undergo the change in composition,
change in phases and exhibit the properties according to the changed environment.

OBJECTIVES
 Students develop a sound knowledge on the types of Mass Transfer thro’ a driving
force in the same fashion as temperature differences as driving force for heat
transfer. The students shall have an elementary knowledge on fluid flow, heat
transfer and stoichiometry.
51

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT I ABSORPTION 9
Equilibrium and operating line concept in absorption calculations; types of contactors,
design of packed and plate type absorbers; Operating characteristics of stage wise and
differential contactors, concepts of NTU, HTU and overall volumetric mass transfer
coefficients; multicomponent absorption; mechanism and model of absorption with
chemical reaction; thermal effects in absorption process.

UNIT II DISTILLATION 9
Vapour-liquid equilibria, Raoult's law and deviations from ideality, methods of distillation;
fractionation of binary and multicomponent system; design calculations by McCabe-
Thiele and ponchon-Savarit, methods; continuous contact distillation tower (packed
tower) design; extractive and azeotropic; distillation low pressure distillation; steam
distillation.

UNIT III LIQUID-LIQUID EXTRACTION 9

Equilibrium in ternary systems; equilibrium stage wise contact calculations for batch and
continuous extractors, differential contact extraction equipment - spray, packed and
mechanically agitated contactors and their design calculations; pulsed extractors,
centrifugal extractors.

UNIT IV SOLID-LIQUID EXTRACTION (LEACHING) 9

Solid-liquid equilibria; leaching equipment-batch and continuous types; calculation of
number of stages.

UNIT V ADSORPTION AND OTHER ION EXCHANGE SEPARATION

PROCESSES 9
Theories of adsorption of gases and liquids; industrial adsorbents, adsorption equipment
for batch and continuous operation; design calculation of ion-exchange resins; principle
of ion-exchange; industrial equipment.
Membrane separation process; solid and liquid membranes; concept of osmosis; reverse
osmosis; electrodialysis; their applications; foam separation process; Thermal and
sweep diffusion process.

TOTAL: 45 PERIODS
TEXT BOOKS
1. R.E.Treybal, “Mass Transfer Operations”, McGraw-Hill, III Edition 1980.
2. W.L McCabe J.C.Smith, and Harriot. P., “Unit Operations of Chemical Engineering”,
VI edition McGraw-Hill, International Edition, 2001.

REFERENCES
1 . C.Judson King “Separation Processes”, McGraw-Hill II Edition 1980.
2. A.H.P.Skelland, “Diffusional Mass Transfer”, Krieger, Malapur, FL (1985).
3. Roman Zarfyki and Andrzej Chacuk, “Absorption Fundamentals and Applications",
Pergamon Press, 1993.
4. P.Wankat “Separation Process Engineering ”, Prentice Hall, II Edition 2006.
5. R.F.Strigle (jr), Packed Tower Design and Application, 2nd Edn. Gulf Publishing
Company U.S.A. 1994.

52

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2353 CHEMICAL REACTION ENGINEERING I LT PC

30 0 3
AIM
To present reaction kinetic principles and different type of reactors to achieve the
required reaction.

OBJECTIVES
 To gain knowledge on the selection of right type of reactor for the required reaction.

UNIT I REACTION KINETICS 9

Law of mass action, rate equation, elementary, non-elementary reactions and their
mechanisms, theories of reaction rate and temperature dependency, analysis of
experimental reactor data, evaluation of rate equation, integral and differential analysis
for constant variable volume system, fitting of data complex reaction mechanism.

UNIT II IDEAL REACTORS 9

Design for homogeneous systems, batch, stirred tank and tubular flow reactor, design of
reactors for multiple reactions, combination reactor system, size comparison of reactors.

UNIT III CHOICE OF REACTORS 9

Factors affecting choice, optimum yield and conversion, selectivity, reactivity and yield
problems, consecutive, parallel and mixed reactions, recycle.

UNIT IV HEAT EFFECTS IN REACTORS 9

Isothermal and nonisothermal homogeneous reactor systems, adiabatic reactors, rates
of heat exchanges for different reactors, design for constant rate heat input and constant
heat transfer coefficient, operation, batch and continuous reactors, optimum temperature
progression, Reaction Stability.

UNIT V REACTOR STABILITY AND REACTION EQUILIBRIA 9

Equilibrium in chemically reactive systems, evaluation of reaction equilibrium constant,
effect of temperature on equilibrium, application to system involving gaseous
components, computation of equilibrium composition.

TOTAL: 45 PERIODS
TEXT BOOKS
1. Levenspiel.O, “Chemical Reaction Engineering”, John Wiley, III Ediition, 1998.
2. Smith.J.M., “Chemical Engineering Kinetics”, McGraw-Hill Third Edition, 1981.
3. Fogler .S “Fundamental Chemical Reaction Engg”, Prentice Hall of India.

CH2354 PROCESS INSTRUMENTATION AND CONTROL LT PC

30 0 3
AIM
To introduce control equipments used to control the production process of a chemical
factory and to introduce the control mechanism thro’ automation and computers.

OBJECTIVES
 Gains knowledge in designing a control system and identifying the alternative control
configuration for a given process plant or entire plant. He will be familiar with the
control mechanism before attempting to tackle process control problems.
53

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT I 9
Laplace transformation, transform of standard functions, derivatives and integrals,
inversion, theorems in Laplace transformation, application. Open-loop systems, first
order systems and their transient response for standard input functions, first order
systems in series, linearization and its application in process control, second order
systems and their dynamics, transfer function for chemical reactors and dynamics.

UNIT II 9
Closed loop control systems, development of block diagram for feed-back control
systems, servo and regulator problems, Transfer function for controllers and final control
element, principles of pneumatic and electronic controllers, transportation lag, transient
response of closed-loop control systems and their stability.

UNIT III 9
Introduction to frequency response of closed-loop systems, control system design by
frequency, Bode diagram, stability criterion, Nyquist diagram; Tuning of controller
settings.

UNIT IV 9
Controller mechanism, introduction to advanced control systems, cascade control, feed
forward control, control of distillation towers and heat exchangers, introduction to
microprocessors and computer control of chemical processes.

UNIT V 9
Principles of measurements and classification of process control instruments,
measurements of temperature, pressure, fluid flow, liquid weight and weight flow rate,
viscosity and consistency, pH, concentration, electrical and thermal conductivity, humidity
of gases, composition by physical and chemical properties and spectroscopy.

TOTAL: 45 PERIODS
TEXT BOOKS
1. D. SCoughnowr and Koppel, “Process Systems Analysis and Control”, McGraw-Hill,
New York, 1991.
2. George Stephanopoulos, “Chemical Process Control”, Prentice-Hall of India Pvt.
Ltd., New Delhi, 1990.
3. Patranabis.D, Principles of Process control, II edition, Tata McGraw-Hill Publishing
Co. Ltd., 1981.
4. Peter Harriott, Process control, Tata McGraw-Hill Publishing Co., Reprint 2004.

REFERENCES
1. Thomas, E.Marlin, Process Control, 2nd Edn, McGraw-Hills International Edn. 2000.
2. George Stephanopoulos, Chemical Process Control, Prentice Hall of India 2003.
3. Norman H.CEAGLSKE, Automatic process control for chemical engineers, John
Wiley & Sons, Japan.
4. Emenule, S.Savas, “Computer Control of Industrial Processes”, McGraw-Hill,
London, 1965.
5. Eckman, D.P., “Industrial Instrumentation”, Wiley, 1978.

54

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2355 PROCESS PLANT UTILITIES LTPC

30 03
UNIT I STEAM 9
Steam generation and its application in chemical process plants, distribution and
utilization, design of efficient steam heating systems, steam economy, condensate
utilization, steam traps, their characteristics, selection and application, waste heat
utilization.

UNIT II COMPRESSORS AND VACUUM PUMPS 9

Types of compressors and vacuum pumps and their performance characteristics.
Methods of vacuum development and their limitations, materials handling under vacuum,
piping systems, lubrication and oil removal in compressors in pumps.

UNIT III REFRIGERATION SYSTEMS 9

Refrigeration system and their characteristics, load calculation and load calculation and
humidification and de humidification equipments, drying and cooling tower, air blending,
exhaust, ventilation,cryogenics, their characteristics and production of liquid N2 and O2

UNIT IV INSULATION 9
Importance of insulation for meeting for the process equipment, insulation material and
their effect on various materials of equipment piping, fitting and valves, insulation for
high, intermediate, low and sub zero temperatures including cryogenic insulation,
determination of optimum insulation thickness.

UNIT V INERT GASES 9

Introduction, properties of inert gases & their use, sources and methods of generation,
comparison of nitro generation routes, general arrangement for inerting system,
operational, maintenance and safety aspects.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Jack Broughton; Process utility systems; Institution of Chem. Engineers U.K.
2. Reid, Prausnitz poling; The properties of gases & liquids, IV ed. McGraw Hill
international ed.
3. S.C.Arora & S.Domkumdwar; A course in refrigeration and air conditioning;
Dhanpat Rai & Co.(P) ltd.

CH2356 ENERGY ENGINEERING LTPC

30 03
UNIT I ENERGY RESOURCES - A GLOBAL VIEW 9
Energy sources; coal oil, natural gas; nuclear energy; hydro electricity, other fossil fuels;
geothermal; supply and demand; depletion of resources; need for conservation;
uncertainties; national and international issues.

UNIT II ENERGY AND ENVIRONMENT 9

Energy; various forms; energy storage; structural properties of environment; bio-geo-
chemical cycles; society and environment population and technology.

UNIT III ENERGY AND TECHNOLOGICAL SOCIETY 9

Energy and evolution; growth and change; patterns of consumption in developing and
advances countries; commercial generation of power requirements and benefit.
55

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV MANAGEMENT OF ENERGY CONSERVATION IN CHEMICAL

INDUSTRIES 9
Chemical industries; classification; conservation in unit operation such as separation;
cooling tower; drying; conservation applied to refineries, petrochemical, fertilizers,
cement, pulp and paper, food industries, chloroalkali industries; conservation using
optimization techniques.

UNIT V ENERGY ALTERNATIVES 9

Sources of continuous power; wind and water; geothermal; tidal and solar power; MHD,
fuel cells; hydrogen as fuel.
TOTAL : 45 PERIODS
REFERENCES
1. Krentz, J. H., “Energy Conservation and Utilization ", Allyn and Bacon Inc., 1982.
2. Gramlay, G. M., “Energy ", Macmillan Publishing Co., New York, 1975.
3. Rused, C. K., “Elements of Energy Conservation ", McGraw-Hill Book Co., 1985.

CH2357 PROCESS EQUIPMENT DESIGN– I LTPC

0032
AIM
To integrate the various courses such as Chemistry, Engineering mechanism,
Engineering Graphics, unit operation, Mechanics of solids Materials Technology for a
comprehension approach to the design of the process equipments.

OBJECTIVES
 To develop skill to design and install process equipments used widely in a chemical
industry.
 All Tables/ Chemical Engineers’ Handbook/Data Books/Graph Sheets are permitted
during the Examination/

UNIT I 9
Design and drawing considerations of bolt, nut and screws, welded and riveted joints,
flanged joints, nozzles and reinforcements. Pipe fittings.

UNIT II 9
Design and drawing considerations of vessel supports such as bracket, saddle, skirt, etc.
Storage Tanks for solids, liquids and gases.

UNIT III 9
General design and drawing consideration of vessels subjected to internal pressure, and
external pressure. High pressure vessels.

UNIT IV 9
Fundamental principles, equations, general design and drawing considerations of
cyclone separators centrifuges, thickeners and filtration equipments.

UNIT V 9
General design and drawing considerations of crystallizers, agitated vessel, jacketed
and coil heated vessels.

TOTAL : 45 PERIODS
56

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

TEXT BOOKS
1. R.S. Khurmi, “Textbook of Machine design”. S. Chand & Company , XXV Edition ,
2005.
2. M.V. Joshi and V.V. Mahajan, “Design of Process Equipment Design”, McMillan India
III Edition 1994.

REFERENCES
1. S.D. Dawande, “Process Design of Equipments”, Central Techno Publications,
Nagpur, 2000.
2. Indian Standard Specifications IS-803, 1962; IS-4072, 1967; IS-2825, 1969. Indian
Standards Institution, New Delhi.
3. R.H. Perry, “Chemical Engineers’ Handbook”, McGraw-Hill.
4. W.L. McCabe, J.C. Smith and P. Harriot, “Unit Operation of Chemical Engineering”,
McGraw-Hill, 2001.
5. Robert Treybal, “Mass Transfer Operations”, McGraw-Hill.
6. J.M. Coulson and J.Richardson, “Chemical Engineering”, Vol. 6, Asian Books
Printers Ltd.

CH2358 MASS TRANSFER LAB LTPC

0 032
AIM
To determine experimentally certain physical properties of fluids and solids

OBJECTIVES
 To gain knowledge on the determination of important data for the design and
operation of the process equipments.

LIST OF EXPERIMENTS
1. Simple distillation.
2. Steam distillation.
3. Packed column distillation.
4. Bubble cap distillation.
5. Diffusivity measurements.
6. Liquid-liquid extraction.
7. Vacuum Dryer.
8. Tray dryer.
9. Rotary dryer.
10. Surface Evaporation.
11. Adsorption.
12. Leaching.

* Minimum 10 experiments shall be offered.

TOTAL: 45 PERIODS

57

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2359 PROCESS CONTROL LAB LT PC

0 0 32

AIM
To determine experimentally the methods of controlling the processes including
measurements using process simulation techniques.

OBJECTIVES
 To gain knowledge on the development and use of right type of control dynamics
for process control under different operative conditions.

LIST OF EXPERIMENTS
1. ON-OFF control of thermal process
2. Simulation of Proportional Controller
3. Flow control loop and Flow Transmitter
4. Level Control loop and Level Transmitter
5. Pressure control loop and Pressure Transmitter
6. Control valve characteristics
7. Verifying the inherent characteristics of control valve
8. Flow co-efficient of control valve
9. Range ability of control valve
10. Verifying the response of Non-Interacting level System
11. Verifying the response of Interacting level System
12. Effect of PI controller on flow control System
13. The effect of a P controller on level process for set point and load changes
14. Effect of P, PI, PID Controller on Pressure Control Loop
15. Optimum controller setting using Zigler’s Nichols Methods
16. Optimum Controller Tuning on Level Process Station

*Minimum 10 experiments shall be offered.

TOTAL: 45 PERIODS

CH2401 CHEMICAL REACTION ENGINEERING - II LT PC

30 0 3
AIM
To introduce various types of Reactions and Reactors that are commonly used in
Chemical Engineering operations.

OBJECTIVES
 Get ability in deciding and designing the type of Reactors that are necessary for
a particular type of reaction in an Industry. They also learn mechanism and
control of several types of reactions.

UNIT I NON-IDEAL REACTORS 9

The residence time distribution as a factor performance; residence time functions and
relationship between them in reactor; basic models for non-ideal flow; conversion in non-
ideal reactors.

58

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT II HETEROGENEOUS PROCESS AND SOLID CATALYSIS 9

Rate equations for heterogeneous reactions nature of catalysis, adsorption isothermal
and rates of adsorption, desorption and surface reaction analysis of rate equation and
rate controlling steps, surface area and pore-volume distribution, catalyst preparation.

UNIT III GAS-SOLID CATALYTIC REACTORS 9

Diffusion within catalyst particle effective thermal conductivity mass and heat transfer
within catalyst pellets; effective factors, Thiele Modulus, fixed bed reactors.

UNIT IV GAS-SOLID NON-CATALYTIC REACTORS 9

Models for explaining the kinetics; volume and surface models; controlling resistances
and rate controlling steps; time for complete conversion for single and mixed sizes,
fluidized and static reactors.

UNIT V GAS-LIQUID REACTIONS 9

Absorption combined with chemical reactions; mass transfer coefficients and kinetic
constants; application of film penetration and surface renewal theories; Hatta number
and enhancement factor for first order reaction, tower reactor design.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Fogler. H.S., “Elements of Chemical reaction engineering III edition, Prentice Hall of
India Pvt. Ltd., 1998 (Indians Reprint 2003)
2. Levenspiel, O; “Chemical Reaction Engineering”, III Edition, John Wiley, 1998.

REFERENCE
1. Smith J.M., “Chemical Engineering Kinetics”, 3rd edition, McGraw-Hill, New York,
1981.

CH2402 TRANSPORT PHENOMENA L T P C

3 0 0 3
AIM
To have an in depth study on fluid transport

OBJECTIVES
 Different types of Fluids, their flow characteristics and different mathematical
models are analysed and applied to actual situations. This subject helps the
students to understand the mechanism of fluids in motion under different
conditions.

UNIT I TRANSPORT PHENOMENA BY MOLECULAR MOTION 9

Importance of transport phenomena; analogous nature of transfer process; basic
concepts, conservation laws; continuous concept, field, reference frames, substantial
derivative and boundary conditions; methods of analysis; differential, integral and
experimental methods.
Phenomenological laws of transport properties Newtonian and non Newtonian fluids;
rheological models; theories of transport properties of gases and liquids; effect of
pressure and temperature.

59

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT II ONE DIMENSIONAL TRANSPORT IN LAMINAR FLOW (SHELL

BALANCE) 12
General method of shell balance approach to transfer problems; Choosing the shape of
the shell; most common boundary conditions; momentum flux and velocity distribution
for flow of Newtonian and non-Newtonian fluids in pipes for flow of Newtonian fluids in
planes, slits and annulus heat flux and temperature distribution for heat sources such as
electrical, nuclear viscous and chemical; forced and free convection; mass flux and
concentration profile for diffusion in stagnant gas, systems involving reaction and forced
convection.

UNIT III EQUATIONS OF CHANGE AND THEIR APPLICATIONS 14

Conservation laws and equations of change; Development of equations of continuity
motion and energy in single multicomponents systems in rectangular co-ordinates and
the forms in curvilinear co-ordinates; simplified forms of equations for special cases,
solutions of momentum mass and heat transfer problems discussed under shell balance
by applications of equation of change, scale factors; applications in scale-up

UNIT IV TRANSPORT IN TURBULENT AND BOUNDARY LAYER FLOW 6

Turbulents phenomena; phenomenological relations for transfer fluxes; time smoothed
equations of change and their applications for turbulent flow in pipes; boundary layer
theory; laminar and turbulent hydrodynamics thermal and concentration boundary layer
and their thicknesses; analysis of flow overflat surface.

UNIT V ANALOGIES BETWEEN TRANSPORT PROCESSES 4

Importance of analogy; development and applications of analogies between momentum
and mass transfer; Reynolds, Prandtl, Von Karman and Colbum analogies.

TOTAL: 45 PERIODS
TEXT BOOKS
1. R.B. Bird, W.E. Stewart and E.W. Lightfoot, “Transport Phenomena”, John Wiley, II
Edition 2006.
2. Robert, S Brodkey, Harry C. Hershey, “Transport Phenomena A Unified Approach ”,
Brodkey Publishing 2003.

REFERENCES
1. L.S.Sissom, and D.R.Pitts, “Elements of Transport Phenomena”, McGraw-Hill, New
York, 1972.
2. R.W.Fahien, “Elementary Transport Phenomena”, McGraw-Hill, New York, 1983.
3. J.R. Welty, R.W. Wilson, and C.W.Wicks, Rorer G.E, Wilson R.W. “Fundamentals of
Momentum Heat and Mass Transfer”, V Edn. John Wiley, New York, 2007.

60

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2403 BIOCHEMICAL ENGINEERING L T P C

3 0 0 3
AIM
To impart knowledge on the role of micro organism in different types of Bio-chemical
reaction.

OBJECTIVES
 To design Bio-chemical reactors with proper knowledge on Enzyme Engineering.

UNIT I INTRODUCTION TO BIOCHEMICAL ENGINEERING 9

An overview of industrial biochemical processes with typical examples, comparing
chemical and biochemical processes, development and scope of biochemical
engineering as a discipline.
Industrially important microbial strains; their classification; structure; cellular genetics;
typical examples of microbial synthesis of biologicals.

UNIT II ENZYMES AND ENZYME KINETICS 9

Enzyme used in industry medicine and food, Their classification with typical examples of
industrially important enzymes; mechanism of enzymatic reactions; michaelis-menten
kinetics; enzymes inhibition; factors affecting the reaction rates; industrial production
purification and immobilization; enzyme reactors with typical examples.

UNIT III MICROBIAL KINETICS 9

Typical growth characteristics of microbial cells; factors affecting growth; Monod model;
modeling of batch and continuous cell growth; immobilized whole cells and their
characteristics; free cell and immobilized cell reactors; typical industrial examples;
transport in cells.

UNIT IV TRANSPORT IN MICROBIAL SYSTEMS 9

Newtonian and Non-Newtonian behaviour of broths; agitation and mixing; power
consumption; gas/liquid transport in cells; transfer resistances; mass transfer coefficients
and their role in scaleup of equipments; enhancement of o2 transfer; heat transfer
correlation; sterilization cycles and typical examples of heat addition and during
biological production.

UNIT V BIOREACTORS 9
Batch and continuous types; immobilized whole cell and enzyme reactors; high
performance bioreactors; sterile and non-sterile operations; reactors in series with and
without recycle; design of reactors and scaleup with typical examples.

TOTAL: 45 PERIODS
TEXT BOOKS
1. Bailey J.E., Ollis, D.F. Biochemical Engineering Fundamentals, McGraw-Hill,
International Edition, 2nd Edition, New York, 1986.
2. Rajiv Dutta Fundamentals of Biochemical Engineering Springer I Edition 2008

REFERENCES
1. Web, F.C., Biochemical Engineering, Van Nostrand, 1964.
2. Atkinsono, B., Biochemical Reactors, Pion Ltd., 1974

61

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2404 PROCESS ECONOMICS L T P C

3 0 0 3

AIM
To introduce process economics and industrial management principles to chemical
engineers.

OBJECTIVES
 The objective of this course is to teach principles of cost estimation, feasibility
analysis, management, organization and quality control that will enable the
students to perform as efficient managers.

UNIT I PRINCIPLES OF MANAGEMENT AND ORGANISATION 12

Planning, organization, staffing, coordination, directing, controlling, communicating,
organization as a process and a structure; types of organizations.
Method study; work measurement techniques; basic procedure; motion study; motion
economy; principles of time study; elements of production control; forecasting; planning;
routing; scheduling; dispatching; costs and costs control, inventory and inventory control.
UNIT II INVESTMENT COSTS AND COST ESTIMATION 8
Time Value of money; capital costs and depreciation, estimation of capital cost,
manufacturing costs and working capital, invested capital and profitability.
UNIT III PROFITABILITY, INVESTMENT ALTERNATIVE AND REPLACEMENT9
Estimation of project profitability, sensitivity analysis; investment alternatives;
replacement policy; forecasting sales; inflation and its impact.
UNIT IV ANNUAL REPORTS AND ANALYSIS OF PERFORMANCE 8
Principles of accounting; balance sheet; income statement; financial ratios; analysis of
performance and growth.
UNIT V ECONOMIC BALANCE 8
Essentials of economic balance – Economic balance approach, economic balance for
insulation, evaporation, heat transfer.
TOTAL : 45 PERIODS

TEXT BOOKS
1. Peters, M. S. and Timmerhaus, C. D. RE West , “Plant Design and Economics for
Chemical Engineers”, III Edn, McGraw Hill, 2003.
2. Holand, F.A., Watson, F.A. and Wilkinson, J.K., "Introduction to process Economics",
2nd Edn, John Wiley, 1983.
3. Narang, G.B.S. and Kumar, V., “Production and Costing”, Khanna Publishers, New
Delhi,
REFERENCES
1. Allen, L.A., “Management and Organization”, McGraw Hill.
2. Perry, R. H. and Green, D., “Chemical Engineer’s Handbook “, 7th Edition, McGraw
Hill.

62

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2405 CHEMICAL PROCESS PLANT SAFETY L T P C

3 0 0 3
AIM
To get awareness on the important of total plant safety in a Chemical Industry.

OBJECTIVES
 Become a skill and person in hazopard hazarel analysis and able to find out the
root cause of an accident. Gain knowledge in devising safety policy and
procedures to be adopted to implement total safety in a plant
UNIT I INTRODUCTION TO SAFETY PROGRAMMES 9
Safety in industries; need for development; importance safety consciousness in Indian
chemical industry; social environmental setup; tolerance limit of the society;
psychological attitude towards safety programmes.
Elements of safety programme; effective realization; economic and social benefits;
effective communication training at various levels of production and operation.

UNIT II INDUSTRIAL SAFETY 9

Chemical process industries; potential hazards; chemical and physical job safety
analysis; high pressure; high temperature operation; dangerous and toxic chemicals;
highly radioactive materials; safe handling and operation of materials and machineries;
planning and layout.

UNIT III SAFETY PERFORMANCE 9

Appraisal; effective steps to implement safety procedures; periodic inspection and study
of plant layout and constant maintenance; periodic advice and checking to follow safety
procedures; proper selection and replacement of handling equipments; personal
protective equipments.

UNIT IV ACCIDENTS 9
Industrial accidents – accident costs – identification of accident spots; remedial
measures; identification and analysis of causes of injury to men and machines –
accident prevention – accident proneness – vocational guidance, fault free analysis. Fire
prevention and fire protection.

UNIT V HEALTH HAZARDS AND LEGAL ASPECTS 9

Health hazards – occupational – industrial health hazards – health standards, and rules
– safe working environments – parliamentary legislations – factories act – labour welfare
act – ESI Act – Workmen Compensation Act.
Role of Government, safety organizations, management and trade unions in promoting
industrial safety.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Ridley Safety at Work, VII Edition, Butterworth Heinman 2007.
2. William Handley, Industrial Safety Hand Book McGraw-Hill Book Company 2nd
Edition, 1977.
3. Fawatt, H.H. and Wood, W.S.Safety and Accident Prevention in Chemical Operation,
Interscience, 1965

REFERENCES
1. Heinrich, H.W. Dan Peterson, P.E. and Nester Rood. Industrial Accident Prevention,
McGraw-Hill Book Co., 1980
2. Blake, R.P., Industrial Safety, Prentice Hall Inc., New Jersy – 3rd Edn. 1963.
63

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2407 PROCESS EQUIPMENT DESIGN II L T P C

0 0 3 2
(All Tables/Chemical Engineers’ Handbook/Data Books/Graph Sheets are permitted
during the Examination.)

AIM
To gain practical knowledge on the shape and drawing of the process equipments

OBJECTIVES
 To become a design engineers on process equipments design and drawing
consideration of the following:-

UNIT I 9
Fundamental principles, equations, general design and drawing considerations of
cooling towers, evaporators and driers.

UNIT II 9
Heat exchangers, condensers and reboilers.

UNIT III 9
Distillation columns- sieve tray, and bubble cap tray columns and packed column.

UNIT IV 9
Equipments for absorption and adsorption of gases.

UNIT V 9
Equipments for liquid-liquid extraction and solid-liquid extraction.

TOTAL: 45 PERIODS
TEXT BOOKS
1. M.V.Joshi and V.V. Mahajan, “Process Equipment Design”, MacMillan India Ltd.
2. S.D.Dawande, “Process Design of Equipments”, Central Techno Publications,
Nagpur, 2000.

REFERENCES
1. Indian Standard Specifications IS-803, 1962; IS-4072, 1967; IS-2825, 1969. Indian
Standards Institution, New Delhi.
2. R.H. Perry, “Chemical Engineers’ Handbook”, McGraw-Hill.
3. W.L.McCabe, J.C.Smith and Harriet, “Unit Operation of Chemical Engineering”,
McGraw-Hill.
4. Robert Treybal, “Mass Transfer Operations”, McGraw-Hill.
5. J.M. Coulson and J.Richardson, “Chemical Engineering”, vol. 6, Asian Books Printers
Ltd.

64

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2408 CHEMICAL REACTION ENGINEERING LAB LTPC

0 032
AIM
To determine experimentally the kinetics and rate constants of reactions in different
types of reactors.

OBJECTIVES
 To gain knowledge in the design of reactors.

LIST OF EXPERIMENTS*
1. Kinetic studies in a batch reactor
2. Kinetics in a plug flow reactor
3. Kinetics in a PFR followed by a CSTR
4. RTD in a PFR
5. RTD in a packed bed
6. RTD in CSTRs in series

*Minimum 10 experiments shall be offered.

TOTAL : 45 PERIODS

CH2409 SEMINAR AND COMPREHENSION LTPC

0 02 1

The Objective of the comprehension test is to assess the overall level of proficiency and
the scholastic attainment of the student in the various subjects studied during the degree
course.

GE2022 TOTAL QUALITY MANAGEMENT LTPC

30 0 3

UNIT I INTRODUCTION 9
Introduction - Need for quality - Evolution of quality - Definition of quality - Dimensions of
manufacturing and service quality - Basic concepts of TQM - Definition of TQM – TQM
Framework - Contributions of Deming, Juran and Crosby – Barriers to TQM.

UNIT II TQM PRINCIPLES 9

Leadership – Strategic quality planning, Quality statements - Customer focus –
Customer orientation, Customer satisfaction, Customer complaints, Customer retention -
Employee involvement – Motivation, Empowerment, Team and Teamwork, Recognition
and Reward, Performance appraisal - Continuous process improvement – PDSA cycle,
5s, Kaizen - Supplier partnership – Partnering, Supplier selection, Supplier Rating.

UNIT III TQM TOOLS & TECHNIQUES I 9

The seven traditional tools of quality – New management tools – Six-sigma: Concepts,
methodology, applications to manufacturing, service sector including IT – Bench marking
– Reason to bench mark, Bench marking process – FMEA – Stages, Types.

65

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV TQM TOOLS & TECHNIQUES II 9

Quality circles – Quality Function Deployment (QFD) – Taguchi quality loss function –
TPM – Concepts, improvement needs – Cost of Quality – Performance measures.

UNIT V QUALITY SYSTEMS 9

Need for ISO 9000- ISO 9000-2000 Quality System – Elements, Documentation, Quality
auditing- QS 9000 – ISO 14000 – Concepts, Requirements and Benefits – Case studies
of TQM implementation in manufacturing and service sectors including IT.

TOTAL : 45 PERIODS
TEXT BOOK
1. Dale H.Besterfiled, et at., “Total Quality Management”, Pearson Education Asia,
Third Edition, Indian Reprint (2006).

REFERENCES
1. James R. Evans and William M. Lindsay, “The Management and Control of Quality”,
(6th Edition), South-Western (Thomson Learning), 2005.
2. Oakland, J.S. “TQM – Text with Cases”, Butterworth – Heinemann Ltd., Oxford, Third
Edition (2003).
3. Suganthi,L and Anand Samuel, “Total Quality Management”, Prentice Hall (India)
Pvt. Ltd. (2006)
4. Janakiraman,B and Gopal, R.K, “Total Quality Management – Text and Cases”,
Prentice Hall (India) Pvt. Ltd. (2006)

CH2021 FOOD TECHNOLOGY LTPC

300 3

AIM
To create awareness on the need for processing and preservatives of Foods.

OBJECTIVE
 To design processing equipments for Food Industries.

UNIT I AN OVERVIEW 5
General aspects of food industry; world food needs and Indian situation.

UNIT II FOOD CONSTITUENTS, QUALITY AND DERIVATIVE FACTORS 9

Constituents of food; quality and nutritive aspects; food additives; standards;
deteriorative factors and their control.

UNIT III GENERAL ENGINEERING ASPECTS AND PROCESSING METHODS 5

Preliminary processing methods; conversion and preservation operations.

UNIT IV FOOD PRESERVATION METHODS 12

Preservation by heat and cold; dehydration; concentration; drying irradiation; microwave
heating; sterilization and pasteurization; fermentation and pickling; packing methods.

66

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT V PRODUCTION AND UTILISATION OF FOOD PRODUCTS 14

Cereal grains; pulses; vegetables; fruits; spices; fats and oils; bakery; confectionery and
chocolate products; soft and alcoholic beverages; dairy products; meat; poultry and fish
products.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Heid J.L. Joslyn M.A., Fundamentals of Food Processing Operation, The AVI
publishing Co., West port 1967.
2. Potter N.N., Food Science, The AVI publishing Co., Westport, 1963.

REFERENCES
1. Heldman D.R., Food Process Engineering, The AVI publishing co., 1975.
2. Charm S.E., The Fundamentals of Foods Engineering, The AVI Publishing Co.,
Westport, 1963.

CH2022 ENZYME ENGINEERING LTPC

30 0 3

UNIT I 9
Types of Microorganism: Structure and function of microbial cells. Fundamentals of
microbial growth, batch and continuous culture. Isolation and purification of enzymes
from cells. Cell and Enzyme Immobilization.

UNIT II 9
Fermentation – Types of mechanisms, Continuous fermentation – aeration and agitation,
kinetics of fermentation – Processes

UNIT III 9
Introduction of Bioreactor design: Continuously stirred aerated tank bioreactors. Mixing
power correlation. Determination of volumetric mass transfer rate of oxygen from air
bubbles and effect of mechanical mixing and aeration on oxygen transfer rate, heat
transfer and power.

UNIT IV 9
Enzyme and Enzyme Kinetics
Introduction to Biochemistry, Function and applications. Nature and function of enzyme.
Coenzyme / Cofactor. Classification of enzymes. Assay methods and units. Examples of
applications of enzymes in industry, analytical technique medicine and Pharmaceuticals.

UNIT V 9
Industrial Bioreactors Utilizing Isolated enzymes and biosensors development and
applications. Designs of reactor, Batch and continue type; analysis for immobilized
enzyme reactors. Sterile and non sterile operations; reactors in series with and without
recycle.

TOTAL : 45 PERIODS

67

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

TEXT BOOKS
1. Technological Applications of Bio-catalysts, BIOTOL series, Butter worth, 1995.
2. Cornish. A -Bowden, Analysis of Enzyme Kinetic Data, Oxford University Press,
1996.

REFERENCES
1. Wiseman. A and Blakeborough N and Dunnill P, Enzymic and nonenzymic catalysis,
Ex. Vol.5 Ellis and Harwood, U.K. (1981).
2. Wiseman A (Ed.), Topics in enzyme and fermentation Bio-technology, Ellis and
Harwood, U.K. Vol-5.

CH2023 FLUIDIZATION ENGINEERING LTPC

30 0 3
UNIT I 9
Pressure drop velocity relationship in packed beds. Correlations of kezenycarman, leva
and Ergun. Fluidization phenomena – properties of fluidized beds. Development of
fluidized condition from fixed bed.

UNIT II 9
Limiting conditions of stability of a fixed bed-minimum fluidizing condition, correlations for
minimum fluidizing velocity.

UNIT III 9
Liquid solid gas solid fluidization – sludging and channeling correlation for bed
expansion in liquid-solid-and gas solid fluidization.

UNIT IV 9
Factors affecting rate of elutriation of fines fluidized bed. Continuous air classification.
Pneumatic transportation of solids in vertical and horizontal lines. Prediction of pressure
drop. Minimum chocking velocity and minimum saltation velocity.

UNIT V 9
Single stage and multi stage continuous fluidization its flow of solids by gravity and
collection of fine using cyclones.
TOTAL : 45 PERIODS
TEXT BOOK
1. Fluidization Engineering, O.Levenspiel and D.Kunii, John Wiley, II Edition 1991

REFERENCES
1. Gar-Liquid-Solid Fluidization Engineering, Liang-Shih Fan, Butter Worths, 1989.
2. Fluidization idealized and Bubbleless with Applications, Monsoon Kwauk, Science
Press, 1992.

68

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2024 PROCESSES OPTIMIZATION LTPC

30 0 3

UNIT I OPTIMISATION 15
Introduction; formulation of objective functions; fitting models to data; classification of
functions; necessary and sufficient conditions for optimum; unimodal, multimodal
functions; analytical methods lagrange multiplier methods.

UNIT II NUMERICAL METHODS 15

Unimodel functions; newton's quasi newton, secant methods; region elimination
methods, polynomial approximation; quadratic and cubic interpolation techniques for
optimum. Multimodal functions; direct methods; random, grid. Hooke’s nelder and mead
methods; Powell’s technique; indirect methods; gradient and conjugate gradient
methods; secant methods.

UNIT III LINEAR AND NON-LINEAR PROGRAMMING APPLICATIONS 15

Review on basic concepts of LP formulations; Simplex methods; Integer, quadratic,
geometric and dynamic programming.
Heat transfer and energy conservation; separation processes; fluid flow systems; reactor
design and operation; large scale systems.

TOTAL : 45 PERIODS
TEXT BOOKS.
1. Edgar, T.F., Himmelblau, D.M., “Optimisation of Chemical Processes”, McGraw-Hill II
Edition 2001.
2. Reklaitis, G.V., Ravindran, A., Ragsdell, K.M. “Engineering Optimisation”, John
Wiley, II Edition 2006

REFERENCES
1. Biles, W.E., Swain, J.J.; “Optimisation and Industrial Experimentation”, Inter Science,
New York, 1980.
2. Seinfeld, J.H.; Lapidus, L; “Process Modelling, Estimation and Identification”,
Prentice Hall, Englewood Cliffs, New Jersey, 1974.
3. Beveridge, C.S.; Schechter, R.S.; “Optimisation: Theory and Practice”, McGraw-Hill
Book Co., New York, 1970.

GE2025 PROFESSIONAL ETHICS IN ENGINEERING LTPC

30 03

UNIT I ENGINEERING ETHICS 9

Senses of ‘Engineering Ethics’ – Variety of moral issues – Types of inquiry – Moral
dilemmas – Moral Autonomy – Kohlberg’s theory – Gilligan’s theory – Consensus and
Controversy – Professions and Professionalism – Professional Ideals and Virtues –
Uses of Ethical Theories.

UNIT II ENGINEERING AS SOCIAL EXPERIMENTATION 9

Engineering as Experimentation – Engineers as responsible Experimenters – Research
Ethics - Codes of Ethics – Industrial Standards - A Balanced Outlook on Law – The
Challenger Case Study

69

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT III ENGINEER’S RESPONSIBILITY FOR SAFETY 9

Safety and Risk – Assessment of Safety and Risk – Risk Benefit Analysis – Reducing
Risk – The Government Regulator’s Approach to Risk - Chernobyl Case Studies and
Bhopal.

UNIT IV RESPONSIBILITIES AND RIGHTS 9

Collegiality and Loyalty – Respect for Authority – Collective Bargaining – Confidentiality
– Conflicts of Interest – Occupational Crime – Professional Rights – Employee Rights –
Intellectual Property Rights (IPR) - Discrimination

UNIT V GLOBAL ISSUES 9

Multinational Corporations – Business Ethics - Environmental Ethics – Computer Ethics -
Role in Technological Development – Weapons Development – Engineers as Managers
– Consulting Engineers – Engineers as Expert Witnesses and Advisors – Honesty –
Moral Leadership – Sample Code of Conduct
TOTAL: 45 PERIODS
TEXT BOOKS
1. Mike Martin and Roland Schinzinger, “Ethics in Engineering”, McGraw Hill, New
York, 2005.
2. Charles E Harris, Michael S Pritchard and Michael J Rabins, “Engineering Ethics –
Concepts and Cases”, Thompson Learning, 2000.

REFERENCES
1. Charles D Fleddermann, “Engineering Ethics”, Prentice Hall, New Mexico, 1999.
1. John R Boatright, “Ethics and the Conduct of Business”, Pearson Education, 2003
3. Edmund G Seebauer and Robert L Barry, “Fundamentals of Ethics for Scientists and
Engineers”, Oxford University Press, 2001.
4. Prof. (Col) P S Bajaj and Dr. Raj Agrawal, “Business Ethics – An Indian Perspective”,
Biztantra, New Delhi, 2004.
5. David Ermann and Michele S Shauf, “Computers, Ethics and Society”, Oxford
University Press, (2003).

CH2025 AIR POLLUTION AND CONTROL LTPC

30 0 3

UNIT I INTRODUCTION 9
Air Pollution Regulatory Framework Histroy – Air Pollution Regulatory Framework -
Regulatory System – Laws and Regulations – Clean air Act – Provisions for Recent
Developments.

UNIT II AIR POLLUTION GASES 9

Measurement fundamentals – chemicals and physical properties – Phase Equelbonem
consecoation laws – Incinerators – Design and Performance – Operation and
Maintainance - Absorbers – Design operation and improving performances Absorbers.

UNIT III PARTICULATE AIR POLLUTION 9

Particle Collection mechanisms – Fluid particle Dynamics – Particle size Distribution –
Efficency – Gravity Setling chambers Cyclones – Electrostatic precepators Bannouses
70

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT IV HYBRID SYSTEM 9

Heat electrostatic precepitation – Genizing Heat Scrubbers – Dry Scrubbers –
Electrostatically Augmented Fabric Fillration

UNIT V AIR POLLUTION CONTROL EQUIPMENT 9

Introduction – Installation – Cost Model.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Air Pollution Control Equipment Louis Theodore, Burley Intuscence 2008.
2. Air Pollution Control CD Cooper and FC.Alley Wairland Press III Edition 2002.
3. Air Pollution Control Engg, Noel de nevey – Mcgrew Hill.

CH2031 DRUGS AND PHARMACEUTICAL TECHNOLOGY LTPC

30 03

UNIT I DRUG METABOLISM AND PHARMACO KINETICS 9

Development of drugs and pharmaceutical industry; organic therapeutic agent’s uses
and economics.
Drug metabolism; physico chemical principles; Radio Activity; Pharma Kinetics-action of
drugs on human bodies.

UNIT II UNIT PROCESSES AND THEIR APPLICATIONS 9

Chemical conversion processes; alkylation; carboxylation; condensation and cyclisation;
dehydration, esterification, halogenation, oxidation, sulfonation; complex chemical
conversions fermentation.

UNIT III MANUFACTURING METHODS 9

Compressed tablets; wet granulation; dry granulation or slugging; direct compression,
tablet presses formulation; coating pills; capsules sustained action dosage forms;
parential solutions, oral liquids; injections; ointments; standard of hygiene and
manufacturing practice.

UNIT IV PHARMACEUTICAL PRODUCTS 9

Vitamins; cold remedies; laxatives; analgesics; nonsteroidal contraceptives; external
antiseptics; antacids and others.

UNIT V MICROBIOLOGICAL AND ANIMAL PRODUCTS AND PACKING AND

QUALITY CONTROL 9
Antibiotics; biologicals; hormones; vitamins; preservation, Packing; packing techniques;
quality control.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Rawlines, E.A.; “Bentleys Text book of Pharmaceutics”, III Edition, Bailliere Tindall,
London, 1977.
2. Yalkonsky, S.H.; Swarbick. J.; “Drug and Pharamaceutical Sciences”, Vol. I, II, III, IV,
V, VI and VII, Marcel Dekkar Inc., New York, 1975.

REFERENCE
1. “Remingtons Pharmaceutical Sciences”, Mack Publishing Co., 1975.
71

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2032 FERTILIZER TECHNOLOGY LTPC

30 03

UNIT I NITROGENOUS FERTILISERS 9

Methods of production of nitrogenous fertilizer-ammonium sulphate, nitrate, urea and
calcium ammonium nitrate; ammonium chloride and their methods of production,
characteristics and specifications, storage and handling.

UNIT II PHOSPHATIC FERTILISERS 9

Raw materials; phosphate rock, sulphur; pyrites etc., processes for the production of
sulphuric and phosphoric acids; phosphates fertilizers - ground rock phosphate; bone
meal-single superphosphate, triple superphosphate, triple superphosphate, thermal
phosphates and their methods of production, characteristics and specifications.

UNIT III POTASSIC FERTILISERS 9

Methods of production of potassium chloride, potassium schoenite, their characteristics
and specifications.

UNIT IV COMPLEX AND NPK FERTILISERS 9

Methods of production of ammonium phosphate, sulphate diammonium phosphate,
nitrophosphates, urea, ammonium phosphate, mono-ammonium phosphate and various
grades of NPK fertilizers produced in the country.

UNIT V MISCELLANEOUS FERTILISERS 9

Mixed fertilizers and granulated mixtures; biofertilisers, nutrients, secondary nutrients
and micro nutrients; fluid fertilizers, controlled release fertilizers, controlled release
fertilizers.
TOTAL: 45 PERIODS
TEXT BOOKS
1. “Handbook of fertilizer technology”, Association of India, New Delhi, 1977.
2. Menno, M.G.; “Fertilizer Industry - An Introductory Survey”, Higginbothams Pvt. Ltd.,
1973.

REFERENCES
1. Sauchelli, V.; “The Chemistry and Technology of Fertilizers”, ACS MONOGRAPH No.
148, Reinhold Publishing Cor. New York, 1980.
2. Fertiliser Manual, “United Nations Industrial Development Organisation”, United
Nations, New York, 1967.
3. Slack, A.V.; Chemistry and Technology of Fertilisers, Interscience, New York, 1966.

CH2033 MODERN SEPARATION PROCESSES LTPC

30 0 3
UNIT I INTRODUCTION 9
Review of conventional processes, Recent advances in separation techniques based on
size, surface properties, ionic properties and other special characteristics of substances,
Process concept, Theory and equipment used in cross flow filtration, cross flow
electrofiltration, dual functional filter, Surface based solid – liquid separations involving a
second liquid, Sirofloc filter.
72

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT II MEMBRANE SEPARATIONS 9

Types and choice of membranes, Plate and frame, tubular, spiral wound and hollow fibre
membrane reactors and their relative merits, Commercial, pilot plant and laboratory
membrane permeators involving dialysis, reverse osmosis, Nanofiltration, ultrafiltration,
Microfiltration and Donnan dialysis, Economics of membrane operations, Ceramic
membranes
UNIT III SEPARATIONS BY ADSORPTION TECHNIQUES 9
Mechanism, Types and choice of adsorbents, Normal adsorption techniques, Affinity
chromatography and immuno Chromatography, Types of equipment and commercial
process, Recent advances and process economics.
UNIT IV IONIC SEPARATIONS 9
Controlling factors, Applications, Types of equipment employed for electrophoresis,
Dielectrophoresis, ion exchange chromatography and electrodialysis, Commercial
processes.
UNIT V OTHER TECHNIQUES 9
Separations involving Lyophilization, Pervaporation and permeation techniques for
solids, liquids and gases, Industrial viability and examples, zone melting, Addluctive
crystallization, Other separation processes, Supercritical fluid extraction, Oil spill
Management, Industrial effluent treatment by modern techniques.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Lacey, R.E. and S.Looeb – Industrial Processing with Membranes Wiley – Inter
Science, N.Y.1972.
2. King, C.J. Separation Processes, Tata McGraw–Hill Publishing Co. Ltd., 1982.

REFERENCES
1. Schoew, H.M. – New Chemical Engineering Separation Techniques, Interscience
Publishers, 1972.
2. Ronald W. Roussel – Handbook of Separation Process Technology, John Wiley,
New York, 1987.
3. Kestory, R.E. – Synthetic polymeric membranes, Wiley. Interscience, N.Y. 1985.
4. Osadar, Varid Nakagawal – Membrane Science and Technology, Marcel Dekkar
(1992).

CH 2034 WASTE WATER TREATMENT LTPC

30 0 3

UNIT I WASTE WATER TREATMENT AN OVERVIEW 9

Terminology – Regulatios – Health and Environment Concerns in waste water
management – Constituents in waste water inorganic – Organic and metallic
constituents.

UNIT II PROCESS ANALYSIS AND SELECTION 9

Components of waste water flows – Analysis of Data – Reactors used in waste water
treatment – Mass Balance Analysis – Modeling of ideal and non ideal flow in Reactors –
Process Selection.

73

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT III CHEMICAL UNIT PROCESSES 9

Role of unit processes in waste water treatment chemical coagulation – Chemical
precipitation for improved plant performance chemical oxidation – Neutralization –
Chemical Storage.

UNIT IV BIOLOGICAL TREATMENT 9

Overview of biological Treatment – Microbial metabolism – Bacterial growth and
energatus – Aerobic biological oxidation – Anaerobic fermentation and oxidation –
Trickling filters – Rotating biological contractors – Combined aerobic processes –
Activated sludge film packing.

UNIT V ADVANCED WASTE WATER TREATMENT 9

Technologies used in advanced treatment – Classification of technologies Removal of
Colloids and suspended particles – Depth Filtration – Surface Filtration – Membrane
Filtration Absorption – Ion Exchange – Advanced oxidation process.

TOTAL : 45 PERIODS
TEXT BOOK
1. Waste water Engineering Treatment and Reuse: Mc Graw Hill, G. Tchobanoglous, FI
Biston, 2002.
2. Industrial Waste Water Management Treatment and Disposal by Waste Water Mc
Graw Hill III Edition 2008.

CH2035 INDUSTRIAL MANAGEMENT LTPC

30 0 3
UNIT I 9
Principles of Management – functions of management, structure of industrial
organization; Human relations and performance in organization, Workers’ participation in
management.

UNIT II 9
Professional Ethics;Motivation – methods of improving motivation; Need for leadership
and Functions of a leader. Human Resource Development Staff development and
career development. Wage Payment (4 hrs) – classification, types of labour laws, types
of taxes

UNIT III 9
Accidents and Safety – effects of accidents and safety procedures; Environmental
Management - various management techniques for control of environmental pollution;
pollution control acts Materials Management inventory control model, ABC Analysis,
Economic ordering quantity, materials handling

UNIT IV 9
Financial Management - Profit and Loss Account, Balance Sheet, Interpretation of
Statements, Ratio Analysis, Project financing, Project appraisal, return on investments.

UNIT V 9
Marketing and Sales - Marketing, Sales, Market conditions, Break even analysis,
Budgets, Pricing Policies.
TOTAL : 45 PERIODS
74

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

TEXT BOOKS
1. Khanna, O.P.,Industrial Engineering and Management by Dhanpat Rai Publications,
2. Delhi.
3. Sharma, V.K., and Harkut, O.P. Industrial Management
4. Kotler, P., Marketing Management , Prentice Hall of India, New Delhi
5. Kotler, P., Principles of Management by, TEE Publication.

REFERENCES
1. Duncan, J.C, The Principles of Industrial Management Bibliobazaar LLC 2008
2. Smith, J.R., The Elements of Industrial Management Bibliobazaar LLC 2009

CH2036 FERMENTATION ENGINEERING LTPC

30 0 3

UNIT I INTRODUCTION TO FERMENTATION PROCESSES. 9

Microbial biomass – Microbial Engymes – Microbial metabolites – Recombinant products
– Transformation Process – Microbial growth binetus – Isolation and preservation and
improvement of industrially important micro organism.

UNIT II INSTRUMENTATION AND CONTROL. 9

Measurement of process variables – Temperature and its control – Flow measurement
and control – Gases and Liquids – Pressure measurement and control – Cenline
analysis – Control System – Combination of Control Systems – Computer application in
termentation technology.

UNIT III RECOVERY AND PURIFICATION OF FERMENTATION PRODUCTS 9

Removal of Microbial cells – Foam Separation – Precipitation Filtration – Different
Filtration process – Centifugation – Different centrifuge cell description – Different
methods – Solvent recovery – Superfluid extraction – Chromatography – Membrane
processes – Drying – Crystallization – Whole growth processing.

UNIT IV EFFLUENT TREATMENT 9

Strength of fermentation effluent – Treatment and disposal – Treatment Processes –
Physical, chemical and biological – Aerobic process – Anareobic treatment.

UNIT V FERMENTATION ECONOMICS 9

Introduction – Isolation of micro organisms of industrial interest – Strain improvement –
Market potential – Plant and equipment – Media – Air sterilization – Heating and cooling
– Recovery costs.

TOTAL: 45 PERIODS

REFERENCES
1. Principles of fermentation Technology P.Stanbury Buttuworth Hanman – 1999.
2. Fermentation and Biochemical Engineering Handbook – C.C Haber. William Andrew
II Edition 2007.
3. Bioprocess Engineering Hydersen B.K Nancy A.dela K.L.Nelsen Wiley
Interscience,1994.

75

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

CH2041 PETROLEUM TECHNOLOGY LTPC

30 0 3

UNIT I INTRODUCTION 9
Refinery products – Refinery Feeds – Crude distillation – Coking and thermal process.

UNIT II CATALYTIC CRACKING 9

Catalytic Cracking - Catalytical hydro cracking – Hydroprocessing and Reused
processing hydro treating.

UNIT III CATALYTICAL 9

Reforming and isomerization alkylation and polymerization – Product blending –
Supporting processes.

UNIT IV LUBRICIATING 9
Lubriciating oil blending stocks petrochemical feedstocks.

UNIT V COST EVALUATION 9

Cost Evaluation – Economic evaluation of petroleum reused and refineries.

TOTAL: 45 PERIODS
TEXT BOOK
1. Petroleum Refining : Technology and economics CRC Press V Edition 2007 J.CH
Garry , Hardward G.E and M.J.Kaiser.
2. Modern Petroleum Technology Upstream Vol I A.G. Lucas Hurley Edition 2002.
3. Modern Petroleum Technology Downstream Vol II A.Lucas Hurley VI Edition 2002.

CH2042 PAPER AND PULP TECHNOLOGY LTPC

30 0 3

UNIT I INTRODUCTION 9
Introduction Basic pulp and paper technology – Wood haves dry – Wood as a raw
material.

UNIT II WOODYARD OPERATION 9

Woodyard operation - Mechanical pulping – Chemical pulping – Secondary fibre pulp
processing.

UNIT III PAPER MACHINE 9

Paper Machine wet and addition paper machine dry and operation – Paper
machine - Wet and operation.

UNIT IV PAPER AND PAPERBOARD 9

Paper and paperboard frames and products – Surface treatments – Finishing operation
– End uses.

76

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

UNIT V PROPERTIES AND TESTING OF PULP AND PAPER 9

Properties and Testing of pulp and paper Process control – Quality assurance – Water
and air pollution control.
TOTAL : 45 PERIODS

REFERENCE
1. Pulp and paper chemistry and Technology Monica ER Monica, Goran Gellerstcdt
Gunnar Hennksson De Gneyter 2009.

CH2043 POLYMER TECHNOLOGY LTPC

30 0 3

UNIT I INTRODUCTION 6
History of Macromolecules – structure of natural products like cellulose, rubber,proteins
– concepts of macro molecules – Staudinger’s theory of macromolecules – difference
between simple organic molecules and macromolecules.

UNIT II ADDITION POLYMERIZATION 12

Chemistry of Olefins and Dienes – double bonds – Chemistry of free radicals –
monomers – functionality – Polymerization: Initiation – types of initiation – free radical
polymerization – cationic polymerization – anionic polymerization – coordination
polymerization – industrial polymerization – bulk, emulsion, suspension and solution
polymerization techniques – Kinetics – Copolymerization concepts.

UNIT III CONDENSATION POLYMERIZATION 9

Simple condensation reactions – Extension of condensation reactions to polymer
synthesis – functional group reactivity – polycondensation – kinetics of
polycondensation- Carother’s equation – Linear polymers by polycondensation –
Interfacial polymerization – crosslinked polymers by condensation – gel point.

UNIT IV MOLECULAR WEIGHTS OF POLYMERS 9

Difference in molecular weights between simple molecules and polymers – number
average and weight average molecular weights – Degree of polymerization and
molecular weight – molecular weight distribution – Polydispersity – molecular weight
determination. Different methods – Gel Permeation Chromatography – Osmometry,
Light Scattering.

UNIT V TRANSITIONS IN POLYMERS 9

First and second order transitions – Glass transition, Tg – multiple transitions in
polymers – experimental study – significance of transition temperatures – crystallinity in
polymers – effect of crystallization – in polymers – factors affecting crystallization crystal
nucleation and growth – relationship between Tg and Tm – Relationship between
properties and crystalline structure.

TOTAL : 45 PERIODS

77

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

REFERENCES
1. Billmeyer.F.W.,Jr, Text Book of Polymer Science, Ed. Wiley-Interscience, 1984.
2. Seymour.R.B., and Carraher.C.E., Jr., Polymer Chemistry, 2nd Ed., Marcel Dekker,
1988.
3. Gowariker.V.T., Viswanathan.N.V., and Sreedar.J., Polymer Science, Wiley Eastern
Ltd., 1988.
4. Joel,R.F; Polymer Science and Technology, Eastern Economy Edition, 1999.
5. Rodriguez, F., Cohen.C., Oberic.K and Arches, L.A., Principles of Polymer Systems,
5th edition, Taylor an

CH2044 PROCESS MODELING AND SIMULATION LTPC

30 0 3

UNIT I BASIC MODELLING 8

Introduction to modeling; uses of mathematical models; scope of coverage; principles of
formation; review on algebraic, ordinary and partial differential equations; solutions of the
above equations; linearization; probabilization models; development of models by
experiment and statics; regression and correlation analysis.

UNIT II MATRIX MODELS 7

Elementary matrix concepts; simple array models; multi-component distillation; dynamic
simulation of distillation column; solution techniques for matrix differential equations;
matrix formation of distributed parameter system; flow pattern in stirred tanks; design of
mixers.

UNIT III LUMPED PARAMETER MODEL 8

Introduction to lumped parameter system; mathematical description of multiphase
transfer process; non isothermal reactors etc.; Axial dispersion in packed beds; reactor
design from response curves; reactor effectiveness factor; computer aided modeling of
reaction networks.

UNIT IV DISTRIBUTED PARAMATER MODEL 8

Formation and solution of one dimensional unsteady state problem in heat transfer and
mass transfer systems; multidimensional problems; application in heat and mass
transfer equipments.

UNIT V OPTIMISATION AND SIMULATIONS 14

Introduction; application; analytical and numerical techniques for multivariable problems;
techniques for constrained optimization; simulation; introduction; discrete event and
continuous simulation; dynamic simulation of reactors, distillation columns, absorbers,
evaporators and crystallizers; simulation in process control.

TOTAL: 45 PERIODS
TEXT BOOKS
1 .Ramirez, W.; “Computational Methods in Process Simulation”, Butterworths
Publishers, II Edition 1998..
2. Edgar, T.F., Himmelblau, D.M., “Optimisation of Chemical Processes”, McGraw-Hill II
Edition 2001.

78

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

REFERENCES
1. Luyben, W.L., “Process Modelling Simulation and Control”, McGraw-Hill Book Co.,
1973.
2. Myers, A.L., Seider, W.D.; “Introduction to Chemical Engineering and Computer
Calculations”, Prentice Hall Inc., Englewood Cliffs, New Jersey, 1976.
3. Chemical Engineering Refresher Series on “Process Dynamics”, McGraw-Hill
Publications, 1983.
4. Mickley, H.S.; Sherwood, T.S.; Reed C.E.; “Applied Mathematics for Chemical
Engineers”, Tata McGraw-Hill Publishing Co. Ltd., New Delhi, 1989.

CH2045 COMPUTER APPLICATIONS IN CHEMICAL ENGINEERING LTPC

30 03
AIM
To introduce computer and its application to solve problems in Chemical Engineering
operation thro required software.
OBJECTIVES
 To obtain skill in creating database retrieval of data and also to solve
Mathematical models thro’ linear and non-linear programming.
UNIT I INTRODUCTION 9
Review on Programming languages, Basic, Fortran, Review on operating system
commands.
UNIT II SPREAD SHEETS 9
Application in Density, molecular weight, mole and percentage compositions, Empirical
and Molecular formula calculations, Heat of mixing, Gas laws, Vapour pressure,
Chemical Kinetics calculations.
UNIT III SPREAD SHEETS (DATA ANALYSIS) 9
Application in data processing, Statistical analysis of data, Regression. Analysis of
variance, Interpolation, Graphical representations of various Chemical Engineering
problem both in laboratory exercise and core subjects such as Mechanical operation,
Reaction Engineering, Distillation etc.,
UNIT IV DATABASE 9
Design and developments of simple databases on Chemical and Physical properties of
substances. Retrieval and Database in report, query and other formats, Interfacing with
other softwares. Preparation of Material and energy Balances preparation of plant
layout.

UNIT V MATHEMATICAL PROGRAMMING 9

Linear Programming, Transportation, Assignment, Dynamic Programming in Chemical
Engineering, Formulation and solution through PC based programes.

TOTAL : 45 PERIODS
TEXT BOOKS
1. Hanna, O.T. Scandell, O.C. Computational Methods in Chemical Engineering,
Prentice Hall, 1995.
2. R.K. Taxali, T.K. dBase IV made simple, Tata McGraw-Hill 1991.

79

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in

REFERENCES
1. Jerry, O., Breneman, G.L. Spreadsheet Chemistry, Prentice Hall, Englewood Cliffs,
1991.
2. Myers, A.L. Seider W.D. Introduction to Chemical engineering and Computer
Calculations.

GE2023 FUNDAMENTALS OF NANOSCIENCE L TP C

3 00 3
UNIT I INTRODUCTION 10
Nanoscale Science and Technology- Implications for Physics, Chemistry, Biology and
Engineering-Classifications of nanostructured materials- nano particles- quantum dots,
nanowires-ultra-thin films-multilayered materials. Length Scales involved and effect on
properties: Mechanical, Electronic, Optical, Magnetic and Thermal properties.
Introduction to properties and motivation for study (qualitative only).

UNIT II PREPARATION METHODS 10

Bottom-up Synthesis-Top-down Approach: Precipitation, Mechanical Milling, Colloidal
routes, Self-assembly, Vapour phase deposition, MOCVD, Sputtering, Evaporation,
Molecular Beam Epitaxy, Atomic Layer Epitaxy, MOMBE.

UNIT III PATTERNING AND LITHOGRAPHY FOR NANOSCALE DEVICES 5

Introduction to optical/UV electron beam and X-ray Lithography systems and processes,
Wet etching, dry (Plasma /reactive ion) etching, Etch resists-dip pen lithography

UNIT IV PREPARATION ENVIRONMENTS 10

Clean rooms: specifications and design, air and water purity, requirements for particular
processes, Vibration free environments: Services and facilities required. Working
practices, sample cleaning, Chemical purification, chemical and biological
contamination, Safety issues, flammable and toxic hazards, biohazards.

UNIT V CHARECTERISATION TECHNIQUES 10

X-ray diffraction technique, Scanning Electron Microscopy - environmental techniques,
Transmission Electron Microscopy including high-resolution imaging, Surface Analysis
techniques- AFM, SPM, STM, SNOM, ESCA, SIMS-Nanoindentation

TOTAL : 45 PERIODS
TEXT BOOKS
1. A.S. Edelstein and R.C. Cammearata, eds., “Nanomaterials: Synthesis, Properties
and Applications”, Institute of Physics Publishing, Bristol and Philadelphia, 1996.
2. N John Dinardo, “Nanoscale characterization of surfaces & Interfaces”, 2nd edition,
Weinheim Cambridge, Wiley-VCH, 2000

REFERENCES
1. G Timp (Editor), “Nanotechnology”, AIP press/Springer, 1999.
2. Akhlesh Lakhtakia (Editor), “The Hand Book of Nano Technology, Nanometer
Structure, Theory, Modeling and Simulations”. Prentice-Hall of India (P) Ltd, New
Delhi, 2007.

80

www.android.universityupdates.in || www.universityupdates.in || www.ios.universityupdates.in