cbk-210c-series-custom-convection-bread-maker-manual
cbk-210c-series-custom-convection-bread-maker-manual
Home » Cuisinart » Cuisinart CBK-210C Series Custom Convection Bread Maker Instructions
Contents
1 Cuisinart CBK-210C Series Custom Convection Bread Maker
2 IMPORTANT SAFEGUARDS
3 BEFORE FIRST USE
4 PARTS AND FEATURES
5 CONTROL PANEL
6 OPERATING INSTRUCTIONS
7 POWER FAILURE BACKUP
8 TYPES OF BREADS AND PROGRAMS
9 PROGRAMS AND TIMING
10 LOADING INGREDIENTS INTO THE BREAD PAN
11 MEASUREMENT/CONVERSION CHART INGREDIENT CONVERSION
CHART
12 TIPS AND HINTS
13 BREAD MAKER PANTRY
14 GLUTEN-FREE INGREDIENTS
15 CLEANING AND CARE
16 TROUBLESHOOTING
17 WARRANTY
18 Documents / Resources
18.1 References
19 Related Posts
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present, basic safety precautions should always be
taken, including the following:
1. READ ALL INSTRUCTIONS, PRODUCT LABELS, AND WARNINGS BEFORE USING THIS BREAD MAKER.
2. Do not touch hot surfaces; use handles or knobs and carry the unit by its plastic base. Always use oven mitts
when handling hot material, and allow metal parts to cool before cleaning. Allow the bread maker to cool
thoroughly before putting on or taking off parts.
3. When unit is not in use and before cleaning, unplug the bread maker from the wall outlet. Let the bread maker
cool down completely before assembling or disassembling it.
4. To protect against risk of electric shock, do not immerse the appliance or plugs in water or other liquids.
5. This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge. Close supervision is necessary when any appliance is used
near children. Children should be supervised to ensure that they do not play with the appliance.
6. Do not allow anything to rest on the power cord. Do not plug in the cord where people may walk or trip on it.
Unplug this bread maker from the wall outlet when not in use, before you leave for a trip, or go out for a long
period of time.
7. Do not operate this or any appliance with a frayed or damaged cord or plug, or after the appliance malfunctions
or is dropped or has been damaged in any manner. Take the appliance to the nearest authorized service
facility for examination, repair, or electric or mechanical adjustment.
8. Do not let the cord dangle over the edge of a table or counter or touch hot surfaces. Do not place on an
unsteady or cloth-covered surface.
9. Flashing light indicates ready to operate. Avoid any contact with moving parts.
10. Do not use attachments not recommended by the manufacturer. They may cause fire, electric shock, or injury
or may damage the unit and void the warranty.
11. Do not use outdoors or for commercial purposes.
12. Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
13. Keep the power cord away from the hot surface of this bread maker. Do not put any flammable objects on the
hot surface of this bread maker.
14. Place this bread maker a minimum of 2 inches away from any wall or other object.
15. Do not use this bread maker for other than its intended use.
16. When plugging or unplugging this bread maker, be sure not to touch the plug blades with your fingers.
17. Before unplugging, press and hold the START/STOP/PAUSE button for 3 seconds to cancel any programs,
then grip the plug and pull from the wall outlet. Never pull on the cord.
18. Use of extension cords: A short power-supply cord has been provided to reduce the risk of injury resulting from
becoming entangled in or tripping over a longer cord. Extension cords may be used with care. The marked
electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. The
cord should be arranged so that it will not drape over the counter or tabletop where it can be pulled by children
or tripped over accidentally. If the appliance is of the grounded type, the extension cord should be a grounding-
type 3-wire cord.
19. If the electric circuit is overloaded with other appliances, your bread maker may not operate properly. This
bread maker should be operated on a separate electrical circuit from other operating appliances.
20. Do not operate your appliance in an appliance garage or under a wall cabinet. When storing in an appliance
garage, always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if the
appliance touches the walls of the garage or the door touches the unit as it closes.
21. This appliance is for household use only.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
23. Children should be supervised to ensure that they do not play with the appliance.
24. Appliances are not intended to be operated by means of an external timer or separate remote-control system.
25. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
26. You should not use more than 5 cups (1.25 L) flour total in the bread machine.
27. Preheating of the appliance is not necessary.
NOTICE
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
Remove all packing material and any promotional labels or stickers from your bread maker. Be sure that all parts
of your new bread maker have been unpacked before discarding any packing materials. You may want to keep
the box and packing materials for use at a later date.
Wipe the housing with a damp cloth to remove any dust from the warehouse or shipping. Wash the inside of the lid
with a sponge or damp cloth. Wash the kneading paddle, bread pan, automatic fruit and nut dispenser
compartment, measuring cup, measuring spoon, and pan hook with warm, soapy water and dry completely.
1. Lid
With integrated glass viewing window and handle
2. Control Panel with LCD Display
See Control Panel for more information
3. Automatic Mix-In Dispenser Located at the back of the unit
a. Removable Dispenser Compartment
b. Handle Assembly
c. Compartment Holder
4. Baking Chamber
a. Removable bread pan with handle Nonstick coated interior
b. Kneading paddle Removable nonstick paddle
c. Heating element (not shown)
5. Power Cord (not shown)
6. Pan Hook
Helpful tool for lifting bread pan handle
7. Measuring Spoon
8. Measuring Cup
CONTROL PANEL
1. LCD Display
Displays program, crust colour, loaf size, current cooking step, and timer.
2. MENU Button
Selects desired cooking program. Refer to the program list on the lid or pages 9–11 for all options and more
information.
3. CRUST COLOUR Button
Selects a light, medium, or dark crust shade.
4. LOAF SIZE
Selects a 1-lb. (454 g), 1½-lb. (680 g), or 2-lb. (907 g) loaf.
5. –/+ Buttons
For adjusting program times.
6. Custom Button
For setting and selecting Custom Memory program.
7. Confirm Button
Used for confirming selected settings and programming Custom Memory.
8. START/STOP/PAUSE Button
Starts, stops, and pauses the bread-making/cooking process.
NOTE:
Some program selections are limited to certain crust colours and loaf sizes. The LCD will display accordingly.
Please see Programs and Timing on pages 11–13 for all available combinations.
OPERATING INSTRUCTIONS
1. Remove bread pan from baking chamber by grasping the handle (see figure 1a), turning the pan
counterclockwise, and lifting up. It may be helpful to first lift the handle of the bread pan by using
the pan hook. To properly attach the kneading paddle, insert onto shaft with wide base facing down (see figure
1b).
2. Properly measure all ingredients and put into the bread pan in the exact order they are listed. Always put the
liquids in first, the dry ingredients in next, and the yeast last. Yeast should not touch wet ingredients. Please
refer to page 13 for detailed instructions.
3. Insert the bread pan back into the baking chamber, turning clockwise to lock in place.
4. If the Automatic Mix-In Dispenser is being used, pull out the dispenser compartment from the unit, then add
mix-ins before placing back in the unit. Please refer to the Automatic Mix-In Dispenser section (page 7) for
more instructions.
5. Close the lid and connect the power cord to a standard electrical outlet.
6. Select your program by pressing the MENU button. For more information on each program, see pages 9–11.
7. Select your crust Colour (light, medium, or dark) by pressing the CRUST COLOUR button. If no crust colour is
selected, the unit will automatically default to medium crust colour.
8. Select your loaf size (1 lb. [454 g], 1½ lb. [680 g], or 2 lb. [907 g]) by pressing the LOAF SIZE button. If no loaf
size is selected, the unit will automatically default to a 1½-lb. [680 g] loaf.
9. If you would like the bread-making process to start immediately, first press the CONFIRM button to confirm
your selected settings. The indicator light on the START/STOP/PAUSE button will be flashing, indicating your
selection has been confirmed. Next press the START/STOP/PAUSE button to start the program. The indicator
light will stay solid to show that the bread maker is on.
NOTE: The indicator light must be flashing before you can press the START/STOP/PAUSE button to start the
program. If it is not flashing, press the CONFIRM button again.
10. For additional setting options and info on the Automatic Mix-in Dispenser, Custom Memory, Delay Start Timer,
and Sound On/Off, see pages 7–8.
11. To pause the process at any time, press the START/STOP/PAUSE button. To resume the process, first press
the Confirm button, then press START/STOP/PAUSE. To cancel the process at any time, press and hold the
START/STOP/PAUSE button for 3 seconds.
AUTOMATIC MIX-IN DISPENSER
The Cuisinart® Custom Convection Bread Maker has a built-in Automatic Mix-In Dispenser so your favourite mix-
ins will be added to your dough at the perfect time. Follow the steps below to use the Automatic Mix-In Dispenser:
Please refer to page 8 for more specific details regarding the Automatic Mix-In Dispenser.
CUSTOM MEMORY
Adjust any step of a program (knead, rise, bake, and keep warm) to your preferred time. Save it to memory for
later use.
To program Custom Memory and adjust any program’s times, use these steps:
1. Press the MENU button until the program you wish to edit is displayed.
2. Press and hold the CUSTOM button for 3 seconds. The display will show the step and the current step
duration.
3. To adjust the current step’s time, press the + or – buttons until the desired time is shown. Press the CONFIRM
button to save your change. The display will then show the next step and step duration in the sequence. NOTE:
If you wish to remove a step, reduce the step time to zero. Repeat step 3 until all desired steps have been
adjusted.
4. Press and hold the CUSTOM button to save and exit.
To access your saved setting, press the MENU button until you reach Menu 16, or press the CUSTOM button to
jump directly to it.
NOTE:
Only 1 Custom Memory program can be saved to the unit at one time. Any new Custom Memory program will
overwrite a previously saved Custom Memory program.
NOTE:
Do not use perishable ingredients such as fresh eggs, milk, cheese, or yogurt with the Delay Start function. In
some recipes (like simple yeast breads made with the White, Whole Wheat, and French/Italian settings), you can
use dried substitutes for fresh ingredients. Substitutes such as dried egg powder, dried buttermilk, and nonfat dry
milk powder can be found online or in the baking aisle of many supermarkets. Be sure to follow the instructions on
the packages to ensure there is enough liquid. Follow the same process in adding ingredients to the bread pan,
starting with the liquid ingredients and finishing with the dry and then the yeast. If you substitute dried ingredients,
you may use the Delay Start Timer.
1. Add ingredients.
2. Select program, crust colour, and loaf size.
3. Set the number of hours ahead that you want the loaf to finish. By pressing the + or – buttons, you can set time
for completion up to 13 hours later. Press to increase or decrease by 10-minute increments or hold button
down to scroll faster.
4. Press the CONFIRM button to confirm your selected settings, then press the START/STOP/PAUSE button to
begin the Delay Start countdown.
SOUND ON/OFF
Turn audible alerts on or off. The unit defaults to on. To adjust audible alert settings, follow the steps below:
1. Press and hold the CONFIRM button for 3 seconds. The display will show the current setting (on or off).
2. Press the + or – button until the desired sound setting is shown.
3. Wait 20 seconds or press and hold the Confirm button for 3 seconds to save your selection.
Knead: The first Knead cycle quickly mixes the main ingredients. The second Knead cycle is longer, and
kneads the bread dough. The third Knead cycle gently folds down the bread dough before the final rise in the
program.
Rise: Rise cycles help to ensure the perfect consistency of all yeast breads. During the Rise cycles, your bread
maker will appear to be inactive. The display will show it is in Rise mode.
Bake: This bread maker will consistently regulate both baking time and temperature according to the recipe
you select.
Keep Warm: Allows you to leave the finished bread in the machine to serve warm for up to 60 minutes. Some
crusts will darken slightly in Keep Warm.
Options
1. Pause
You can pause the process for up to 10 minutes at any time by pressing the START/STOP/PAUSE button while
the unit is on. The time will flash while the program is paused. To resume the program, first press the Confirm
button, then press START/STOP/PAUSE. If the unit is left paused for more than 10 minutes, the program will be
canceled.
Automatic Mix-in Dispenser
The Cuisinart® Custom Convection Bread Maker has an Automatic Mix-In Dispenser. The dispenser will
automatically add up to ¾ cup (175 ml) of mix-ins to your dough at the perfect time to ensure optimal
mixing before subsequent rise and baking cycles.
There is also the option to manually add mix-ins at a specific time during the program. An audible signal
of 10 short beeps will sound (if sound is turned on) and “Mix-In” will appear on the display for 2 minutes to
remind you to manually add your desired mix-ins. To do so, open the lid and add the mix-ins. Be sure to
close the lid once finished.
NOTE: The addition of mix-ins typically occurs during the second knead cycle. Additionally, not all
programs use the Automatic Mix-In Dispenser.
2. Removing kneading paddle
After the Knead cycle is complete, there will be an audible signal of 10 short beeps before the last Rise cycle
(the display will show PADDLE for one minute). At this point, you have the option of removing the kneading
paddle and/or reshaping the dough (to preserve the shape of the 1-pound (454 g) yeasted loaves, we
recommend removing the paddle prior to baking in the machine).
To remove the paddle:
Press START/STOP/PAUSE to pause the program.
Open the lid and lift the dough from the pan and remove the kneading paddle.
Form the dough into a neat ball and place in the center of the bread pan.
Close the lid and press the Confirm button, then press START/STOP/PAUSE to resume the program.
NOTE:
If you plan to remove the dough and reshape it in another pan for baking in a conventional oven, this is the time to
do so.
1. Open the lid and use the pan hook to lift the bread pan handle. Using oven mitts, turn the bread pan
counterclockwise and then lift up to remove the pan.
2. Still using the oven mitts, flip the pan upside down. Holding the bottom of the bread pan, move the handle
aside, and shake the pan until the bread is released.
3. For best results, allow the loaf to cool on a wire rack for 20 to 30 minutes prior to slicing.
NOTE:
If you have not removed the kneading paddle before baking, be sure to remove the kneading paddle from the
finished loaf. Use caution; the kneading paddle will be extremely hot.
This unit is equipped with a power failure backup system. In case of any disruption to the power supply, the unit
will store in memory the stage of bread-making cycle and resume once power is restored. The power backup
feature can maintain memory for a power failure up to 15 minutes.
NOTE:
When power is restored to the machine, the program will be paused.
1. White
The White program uses primarily all-purpose or bread flour.
2. Whole Wheat
Whole-wheat bread is made with a significant portion of whole-wheat flour (50% or more), rather than with
100% all-purpose or white bread flour. Since whole-wheat breads are typically denser than breads made with
100% white flour, we recommend adding a bit of rye flour when making whole- wheat breads to create a softer
crumb and maintain freshness for a little bit longer.
3. French/Italian
French breads require special timing and temperatures to achieve that wonderful, crispy crust. Because they
traditionally lack sugars or large amounts of fat, they tend to be lighter in colour.
4. Sweet
The Sweet bread program is specifically designed to bake breads with higher amounts of sugar, fats, and
proteins. These ingredients tend to increase the height and browning of the finished loaves.
5. Low Carb
Low-carb baking is unique in its ingredients. Lower carb (carbohydrate) breads are low in sugar and often have
different flours, most often gluten-free flours, so the baking time is different. Our exclusive low-carb setting
assures proper kneading and baking times. Note that there is only one size for Low Carb breads in the recipes
included here, so when using other recipes, be sure they are similar in volume/measurements as these recipes
(finished weight is usually around 2 pounds [907 g]).
6. Gluten Free
Since gluten is found in most flours used in traditional bread baking, gluten-free breads require nontraditional
ingredients. While they are “yeast breads,” the doughs are generally wet and often have a batter-like
consistency. Note that there is only one size for gluten free breads in the recipes included here, so when using
other recipes, be sure they are similar in volume/measurements as these recipes (finished weight is usually
around 2 pounds [907 g]).
7. Rapid
The Rapid program must be used with a recipe using rapid-rise yeast, or the bread will not rise and bake
properly. Almost any recipe can be modified by replacing instant yeast with an equal or larger amount of rapid-
rise yeast.
8. Package Mix
This program is meant for packaged yeast bread mixes intended for bread machines. Mixes for 1-(454
g), 1½-(680 g), and 2-pound (907 g) loaves work best.
The Automatic Mix-In Dispenser cannot be used with this program.
9. Dough/Pizza Dough
Our Dough/Pizza Dough program mixes ingredients, kneads, and takes the dough through two rises. It is
appropriate for almost any dough recipe (except Gluten-Free, Low Carb, and Sourdough) and ideal for pizza
dough. It is intended that the dough will be removed from the pan, shaped by hand, and then rise again at room
temperature before it’s baked in a conventional oven. The Automatic Mix-In Dispenser cannot be used with this
program.
10. Artisan Dough
This program allows the preparation of artisan doughs, which require several long, slow, cool rises that will
enhance the development of texture, taste, and crust in the final shaped and baked bread. This is a dough only
program and does not include a baking cycle. The dough can be baked using the Bake Only program, or
shaped and baked in a conventional oven. The Automatic Mix-In Dispenser cannot be used with this program.
11. Sourdough Starter
The Sourdough Starter program is an overnight program that prepares a sourdough starter that can then either
be fed in a traditional manner and stored for future use, or can be used immediately as a “quick” sourdough
starter in a dough prepared in the Artisan Dough program. Note that a “quick” sourdough starter will lack the
depth of flavour present when using a fully developed sourdough starter. The Automatic Mix-In Dispenser
cannot be used with this program.
12. Bake Only
This program activates the bread maker for Bake function only. You can use this setting if you want the finished
loaf to have a darker crust colour (this will only require a few extra minutes, so keep your eye on the loaf). It
can also be used to fully bake breads that were first prepared on the Dough/Pizza Dough or Artisan Dough
programs to then bake in loaf form in the bread maker. The program is fully adjustable from 1 minute to 1 hour
30 minutes. The Automatic Mix-In Dispenser cannot be used with this program.
13. Jam
The bread maker is also a great appliance for homemade jams and compotes. The paddle automatically keeps
the ingredients stirring through the process. The heating element is placed in a way that the contents will not
get burned. The program starts in a heating phase so it will appear to be inactive. It will start mixing about 10
minutes into the program. The Automatic Mix-In Dispenser cannot be used with this program.
14. Cake
Often referred to as “quick breads,” recipes for this program are usually baked in a loaf pan or muffin tin. They
are a batter-type bread rather than a yeast dough. If the finished bread is a little moist on top when baking is
complete (moisture will depend on ingredients of the cake), leave it in the bread maker on Keep Warm for 10 to
15 minutes, and it will continue baking.
15. Last Minute Loaf
When you are really in a time crunch, Last Minute Loaf is the program to choose. It is a fast bake cycle, which
goes through kneading, rising, and baking in approximately an hour. The Last Minute Loaf cycle requires the
use of rapid-rise yeast and is significantly lighter in crust color than breads prepared in the longer programs.
16. Custom Memory
Custom Memory allows you to alter the timing of any step in a preset program — for example, decreasing a
rise time or increasing a bake time. These changes will then be saved to program #16 (Custom Memory).
Please refer to page 7 for more information.
The following tables show preset times for each program. Note: There are two times under “Mix-Ins” and “Remove
Paddle”. The Displayed Time is what you will see in the countdown timer window. The Elapsed Time is the
number of minutes that have passed since you pressed the START/STOP/PAUSE button to start the program.
Elapsed Times are listed to let you know when you should expect to be ready to add mix-ins by hand or to remove
the paddle.
Mix-Ins
Total Time
Displayed Time Elapsed Time
Mix-Ins
Total Time
Displayed Time Elapsed Time
8. PACKAGE MIX
9. DOUGH/PIZZA DOUGH
Total Time
1:25
10. ARTISAN DOUGH
Total Time
2:59
Total Time
16:06
Total Time
00:10 – 3:00
13. JAM
Total Time
1:20
14. CAKE
Total Ti Mix-Ins
me
Displayed Time Elapsed Time
1½ lb. (45
1:34 1:31 3 mins 1:18 16 mins
4g
2 lb.
1:40 1:37 3 mins 1:23 17 mins
(680 g)
NOTE:
It’s important to put the ingredients into the bread maker in the exact order given in the recipe. This means, in
most cases:
Also, make sure ALL ingredients are at room temperature, unless otherwise noted (that is, between 75˚F and 90˚F
[24°C and 32°C]). Temperatures too cool or too warm can affect the way the bread rises and bakes.
¼ cup +
2 tablespoons = ¹⁄8 cup ³⁄8 cup =
2 tablespoons
½ cup +
4 tablespoons = ¼ cup 5⁄8 cup =
2 tablespoons
5 tablespoons ¾ cup +
= ¹⁄3 cup 7⁄8 cup =
+ 1 teaspoon 2 tablespoons
WEIGHT IN GR WEIGHT IN OU
INGREDIENT VOLUME AMS NCES
The most important rule of making bread: Use exact measurements. This is the key to successful bread
baking.
NOTE: Removing the kneading paddle is an optional step. See page 8 for more details.
For the most consistent results, use a digital scale to weigh ingredients for the recipes in this booklet, since
even a tablespoon (8 g) of flour or water can change the final quality of the item. The recipes included with this
bread maker have all ingredients listed by both weight and volume, but we recommend to always weigh
ingredients. When measuring wet ingredients via volume, use only liquid measuring cups with clearly marked
measurements on the side.
Always measure on a flat surface and view the measuring cup at eye level to make sure the amount of liquid is
exact.
If measuring dry ingredients by volume, always give a good stir of the dry ingredients before measuring. When
ready to measure, fill a dry measuring cup with a spoon and then level off the top of the cup with the back of a
knife or a spatula. Never use the cup to scoop the ingredients directly from container.
Do not pack down, unless otherwise noted.
Most recipes require all ingredients to be at room temperature, unless otherwise noted. Always use fresh, top
quality ingredients.
In general, a 2-cup (500 ml) white flour (all purpose or bread) recipe will produce a loaf that is about 1 pound
(454 g), a 3-cup (750 ml) flour recipe will produce a loaf that is about 1½ pounds (680 g), and a 4-cup (1 L) flour
recipe will produce a loaf that is about 2 pounds (907 g). Some recipes will have slightly larger or smaller
amounts of flour for each size, and with mix-ins, they may weigh more.
You should not use more than 4½ cups (1.125 ml) all-purpose/bread/whole wheat flour total in the bread
machine.
If you are adapting a recipe, and your mathematical measurements become an odd amount, such as half an
egg, whisk your egg well and then measure out half. A large egg is generally equal to about ¼ cup (60 ml).
Don’t be tempted to omit ingredients, even when they’re in amounts as small as ¹⁄8 teaspoon (0.5 ml). Baking
is chemistry, and changing the formula by even this small amount can change the final product significantly.
If preparing gluten-free, low carb, or cake/quick breads, lightly coat the bread pan and paddle with a
flavourless oil, such as vegetable or grapeseed. Do not use canned nonstick cooking spray as it may reduce
the effectiveness of the nonstick coating over time.
Scrape down the pan if ingredients are sticking to the sides.
KNEADING/MIXING PROCESS
While the Cuisinart® Custom Convection Bread Maker provides a hands-off process, we recommend checking on
the dough as it is going through the first kneading/mixing process. This first step of the kneading will make it clear
if the dough needs additional water (it is not mixing in all of the dry ingredients fully), flour (it is very sticky, not
really kneading well), or just needs to be scraped down (often the case with gluten free, low carb, and cake/quick
breads). Add just 1 teaspoon (5 ml) at a time of either water or the appropriate flour if either of those issues is
occurring. The mixing/kneading process will not be affected by opening the lid to check in on the dough.
When making traditional yeasted breads, it’s good to press your finger into the dough a couple of times. If it feels
too dense, add an additional teaspoon or two of water to the pan. If the dough sticks to your finger then add a
teaspoon of flour. These steps early on will lead to a better loaf in the end!
Ambient temperature and humidity affect bread-maker baking, and these factors can be the reason for
inconsistent results. On a humid day, you may need additional flour. Pay attention to the dough during the first
kneading cycle and if sticky, add flour 1 teaspoon (5 ml) at a time. Alternately, if it is especially dry, you may need
to add additional liquid.
Allow breads to cool for a minimum of 30 minutes before slicing and serving.
Store bread well wrapped at room temperature for up to 2 days.
For longer storage, wrap tightly and freeze.
HIGHER ALTITUDES
Flour is drier at higher altitudes and will absorb more liquid, so use less flour in the recipe. Pay attention to the
dough as it mixes and kneads. If it appears dry, add more of the same liquid used in the recipe.
Doughs prepared and baked at higher altitudes will tend to rise faster. Use about one-third less yeast to help
counteract this phenomenon.
Adding less sugar (where applicable) also helps in producing the proper dough and bread.
Reduce sugar or sweetener by about one-fourth.
Start with one of these changes to determine the best results.
STORING INGREDIENTS
Flours and other bread-making ingredients are prone to rancidity and should be stored properly. Buy them in
smaller quantities and purchase as needed. Always mark the date the ingredient was opened on the bag or
containers so you can keep track. Freezers can often impart off flavours, so be sure containers are well sealed.
All-Purpose Flour:
Can be bleached or unbleached (we prefer unbleached). For the bread machine, all-purpose flour is used for
most yeast and cake quick breads.
Bread Flour:
An unbleached flour high in protein and gluten. This is best for artisan-style breads. This flour can be used as a
substitute for all-purpose flour and will give the baked bread more volume.
Eggs:
Add taste, richness, and colour to breads. They act as emulsifiers and aid in keeping breads fresh and moist.
They also work as a leavener and help with the volume of the bread. Do not use with Delay Start feature unless
using powdered egg or powdered egg white and adding with flour. All recipes included use large eggs.
Fats (assorted):
Add flavour, nutrients, and texture to breads. May be added to just about any bread recipe where such flavours
are appropriate.
Nonfat Dry Milk:
When loading ingredients, add powdered milk along with flour. Using dry milk instead of fresh milk enables you
to use the Delay Start feature. Dry milk is also added to breads (often along with fresh milk/milk products) to
produce a softer crumb.
Salt:
Salt is a necessary part of a yeast bread recipe. It not only adds or enhances flavour, but it controls the yeast
and aids in the rising of the dough. We use non-iodized kosher salt in all of the recipes.
Sweeteners:
Granulated sugar, brown sugar, honey, molasses, maple syrup, golden syrup, and other sweeteners stimulate
yeast growth and development.
Vital Wheat Gluten:
A very high-protein flour made from hard wheat and treated to remove most of the starch. For regular yeast
bread baking, vital wheat gluten is used primarily as an additive to enhance doughs made with low-gluten
flours, such as whole-wheat and other grains. When making Last Minute Loaf breads, vital wheat gluten can
provide a better rise in a shorter rising time.
Yeast:
Our recipes call for instant yeast which can be found in most supermarkets and online markets. When
preparing Last Minute Loaf breads, use rapid-rise yeast.
GLUTEN-FREE INGREDIENTS
If you thought regular baking was a science, gluten-free baking has its own rules! To make gluten-free bread, a
variety of flours and ingredients is necessary to develop a stable and desirable bread that can be used for slicing,
toasting, and making sandwiches. We developed recipes that have a good balance of protein, fat, and starch to
create a delicious result. All of the following ingredients can be found either in the baking or gluten-free section of
your local grocery store or in your local natural food market. They can also be easily ordered online. There are
several commercial brands of gluten-free all-purpose flour blends that can be used successfully.
Almond Flour:
Almond flour adds a lot of protein to your bread. You can use either almond flour or almond meal, as long as it
is finely ground.
Buckwheat Flour:
Buckwheat is not actually wheat at all, despite what the name implies (it is a plant related to sorrel and
rhubarb). Buckwheat flour has a high protein content and a pleasant nutty flavour. It needs to be combined with
other flours to produce a baked item with good structure.
Cornstarch:
Cornstarch is a way to add structure and stability to a gluten-free bread. Be sure not to go overboard, or your
finished bread will have a very starchy and unpleasant flavour.
Flax Seeds (ground):
When ground, flax seeds are even more nutritious and act as a binder to produce a stable structure in baked
goods.
Garbanzo Bean (Chickpea) Flour:
Milled from garbanzo beans (chickpeas) and high in protein, garbanzo bean flour imparts a rich and sweet
flavour in baked goods. Some find it to be overpowering, so it is better to use this flour in savory breads.
Guar Gum:
Similar to xanthan gum and used interchangeably, guar gum is another thickening agent that helps with the
structure of the bread. It should be used sparingly because it imparts a starchier flavour to baked goods than
other gums or thickeners do.
Gluten-Free All-Purpose Flour Blend:
There are a number of these blends on the market now and they all work well. We have found in our testing
that the ones with the higher percentage of rice flours tend to be the most neutral in flavour.
Nonfat Milk Powder:
Nonfat milk powder adds structure to breads by acting as an emulsifier by linking gluten-free flours to fats. The
milk proteins also increase browning.
Powdered Psyllium Husk:
Full of fiber, powdered psyllium husk (or psyllium husk powder) works similarly to a gum. We have found it to
be the best way to add structure and bind ingredients together in gluten-free recipes.
Oat Flour:
Oat flour is very high in protein and is inexpensive to purchase prepared, or you can make your own (process
rolled oats in a blender, food processor, or spice grinder until finely ground). This flour will add a slight nuttiness
to baked breads. Be sure to use oat flour labeled gluten-free.
Potato Starch:
Another starch option for gluten-free breads to contribute to the structure of the loaf. It is also a good tenderizer
and is best used with doughs that are higher in moisture.
Brown Rice Flour:
Milled from the whole rice kernel (still contains the bran), brown rice flour is high in fiber and has a nuttier
flavour than white rice flour. You want to use a flour that is as finely ground as possible – it should have a
smooth, sandy texture. This flour is high in protein (7.5%), so it is a good base for gluten-free baking.
White Rice Flour:
Milled from polished white rice (where the bran and germ have been removed), white rice flour is versatile in
gluten-free baking because it has a rather mild, undetectable flavour. It is a bit lower in protein than brown rice
flour, closer to 5%, but it blends well with other flours.
Sweet White Rice Flour:
A starchier version of white rice flour (not actually sweet), it is ground from glutinous rice and is a better binder
than brown or white rice flours. Only a small amount is needed and is a great addition when making your own
gluten-free flour blend.
Sorghum Flour:
This is a flour that is high in protein and fiber and is a good substitution for oat flour. Look for “sweet” white
sorghum flour when purchasing.
Teff Flour:
Very high in protein, it is a great addition to gluten-free breads. It has an earthy flavour, similar to whole-wheat
flour.
Tapioca Starch (Flour):
This starch is a great binder for gluten-free breads and gives the finished breads good structure. Do not use too
much of it, or the bread will be too elastic.
Xanthan Gum:
Similar to guar gum and used interchangeably, xanthan gum is a thickening agent and helps stabilize gluten-
free breads. You only need a small amount to see the effects.
Yeast:
Crucial to most breads, yeast is what brings your bread to life. There are many types, and in most cases, we
call for instant yeast.
Caution:
Unplug machine before cleaning. Do not put the bread maker in water or in a dishwasher. Do not use scrubbing
brushes or chemical cleansers, as these will damage the machine. Use only a mild, nonabrasive cleanser to clean
the outside of the bread maker.
MAINTENANCE
TROUBLESHOOTING
QUESTION ANSWER
There are a number of factors that could result in a short rise. Be sure that the yeast is
fresh and that all ingredients are room temperature (75ºF to 90°F [24°C to 32°C]). If th
e liquids are too warm or too cold, they will not activate the yeast properly. Be sure the
Why did my dough/bre ingredients are put into the baking pan in the correct order. Note that not all breads rise
ad not rise well? as much as others. Whole-wheat or whole-grain breads tend to be shorter than white b
reads. Also, breads with more sugar or sweeteners, and ones that are enriched with e
ggs, will be taller than regular white breads.
Humidity and room temperature can greatly affect the results of baked yeast breads. K
Why is my bread sunk
eep the bread maker away from direct sunlight. If the humidity is especially high, add a
en/uneven on the top?
n additional teaspoon per cup of flour used in the recipe.
Why does my yeast br The dough was too wet or possibly does not have enough white flour for gluten develo
ead have an underbak pment. Add a bit more flour, 1 tablespoon (15 ml) per cup (250 ml), or reduce the
ed/gummy texture? amount of whole-wheat/grain flours in the recipe and substitute white flour.
Why does the interior This happens if either the bread is too wet or if too much yeast was used. Double-chec
of my yeast bread hav k the recipe and, if necessary, make changes by either adding a small amount of flour
e excessive holes? or reducing the yeast slightly.
This could be one of a few different issues. The mixture may be too dry as a result of n
Why is my yeast ot enough liquid or because lower fat substitutes were used. Another reason may be n
bread heavy and dens ot using enough yeast. If this is occurring in whole-wheat/grain bread, you may need t
e? o use vital wheat gluten to help with the structure of the finished bread.
Sometimes ingredients stick to the corners of the pan, most commonly in the Cake or
Gluten Free programs (both have more batter-like consistencies than a dough). Check
Why are the corners/e on the dough/batter during the first mixing/kneading cycle and pause to scrape down if
dges of the bread full necessary. Lightly coating the bread pan with a flavourless vegetable oil will help to pr
of extra flour/not evenl event this from happening as well. We do not recommend the use of canned nonstick
y mixed? cooking sprays, which can cause damage to the coating of the baking pan and paddle
over time.
There are two options. In most programs you can remove the paddle after you hear th
How do I get the knea
e Remove Paddle signal (prior to the final rise). If this is not an option, or you were not
ding paddle out of the l
present to remove it, wait until the bread is cooled and then, carefully take out the pad
oaf?
dle (use caution because it may be hot).
Most likely this is from ingredients that fell into the bottom of the bread machine or ont
Why is the unit smokin o the heating element. If it is excessive, unplug the unit and once cool, clean the interi
g/producing a burning or of the unit. Plug the unit back in and resume the program (the program will be store
smell? d in memory for a maximum of 15 minutes). In most cases, the smoke/odour will be mi
nimal and it will dissipate.
The display shows “HHH” (accompanied by beeps): The unit’s internal temperatur
e is too high. This usually occurs when trying to make two successive loaves. Open th
e lid and allow the unit to cool 10–20 minutes. The display shows “LLL” (accompani
What do the error ed by beeps): The unit’s internal temperature is too low to bake bread. Stop the
codes mean? beeps by pressing the START/STOP/PAUSE button. The display shows “EEO”, “EEI
”or “EE2” (accompanied by beeps): Unplug the unit and contact your nearby servic
e center.
Why did my mix-ins no The automatic mix-in dispenser is not programmed for every Menu option. Refer to Pr
t get dispensed? ograms and Timing (page 11) for more information on which programs include mix-ins.
Before being able to start the unit, you must confirm your selected settings by pressing
Why does my unit not the CONFIRM button. The indicator light on the START/STOP/PAUSE button will be fla
start when I press STA shing, indicating you can start the program by pressing the START/STOP/PAUSE butto
RT/STOP/PAUSE? n. If the indicator light is not flashing, you will not be able to press the START/STOP/P
AUSE button.
WARRANTY
This warranty is not available to retailers or other commercial purchasers or owners. If your Cuisinart product
should prove to be defective within the warranty period, we will repair it or replace it if necessary. For warranty
purposes, please register your product online at www.cuisinart.ca to facilitate verification of the date of original
purchase and keep your original receipt for the duration of the limited warranty. This warranty excludes damage
caused by accident, misuse or abuse, including damage caused by overheating, and it does not apply to
scratches, stains, discolouration or other damage to external or internal surfaces that does not impair the
functional utility of the product. This warranty also expressly excludes all incidental or consequential damages.
Your Cuisinart product has been manufactured to the strictest specifications and has been designed for use only
in 120 volt outlets and only with authorized accessories and replacement parts. This warranty expressly excludes
any defects or damages caused by attempted use of this unit with a converter, as well as use with accessories,
replacement parts or repair service other than those authorized by Cuisinart.
If the appliance should become defective within the warranty period, do not return the appliance to the store.
Please contact our Customer Service Centre:
$10.00 for shipping and handling of the product (cheque or money order)
Return address and phone number
Description of the product defect
Product date code*/copy of original proof of purchase
Any other information pertinent to the product’s return
The date code format we are using on unit is WWYY, representing week, and year. eg.2423 = manufactured in
24th week of the year 2023).
Note:
We recommend you use a traceable, insured delivery service for added protection. Cuisinart will not be held
responsible for in-transit damage or for packages that are not delivered to us.
To order replacement parts or accessories, call our Customer Service Centre at 1-800-472-7606. For more
information, please visit our website at www.cuisinart.ca.
©2023 Cuisinart Canada | 100 Conair Parkway, Unit # 1 Woodbridge, ON L4H 0L2 Printed in China |
23CC085438.
Documents / Resources
References
User Manual
Manuals+,