Scribd
Upload
14 views1 page

Formolene 3435E: Random Copolymer For Clear Storage Containers and Food and Beverage Containers

Formolene® 3435E is a high melt flow random copolymer suitable for injection molding of clear storage and food containers, offering fast cycle times and easy mold release. It complies with FDA regulations for direct food contact and is free of animal-derived content. The material exhibits excellent clarity, impact resistance, and specific mechanical properties, making it ideal for thin wall applications.

Uploaded by

calidadluisg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views1 page

Formolene 3435E: Random Copolymer For Clear Storage Containers and Food and Beverage Containers

Formolene® 3435E is a high melt flow random copolymer suitable for injection molding of clear storage and food containers, offering fast cycle times and easy mold release. It complies with FDA regulations for direct food contact and is free of animal-derived content. The material exhibits excellent clarity, impact resistance, and specific mechanical properties, making it ideal for thin wall applications.

Uploaded by

calidadluisg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Formolene® 3435E

Random Copolymer for Clear Storage Containers and Food and Beverage
Containers

Formolene® 3435E is a high melt flow random copolymer with fast cycle time and easy mold release. It is designed for
injection molding including thin wall applications requiring a higher level of impact resistance. Its clarity and low
yellow index makes it an excellent choice for ‘see-through’ house wares and rigid packaging.

Formolene® 3435E meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR
177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For
additional information on approved conditions of use for food contact applications, please refer to the “Products”
section on our website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade


Typical Values
Property Test Method English SI
Melt Flow Rate, I2 @ 230°C ASTM D1238 35 g/10 min 35 g/10 min
3
Density ASTM D1505 0.9 g/cm 0.9 g/cm3
Tensile Strength at Yield (50 mm/min) ASTM D638 3,800 psi 26 MPa
Elongation at Yield (50 mm/min) ASTM D638 16 % 16 %
Flexural Modulus (1.3 mm/min), 1% Secant ASTM D790 130,000 psi 896 MPa
Rockwell Hardness ASTM D785 100 R Scale 100 R Scale
Gardner Impact @ 73°F ASTM D5420 225 in-lb 25 J
Notched Izod Impact Strength @ 73°F ASTM D256A 1.5 ft-lb/in 80 J/m
Heat Deflection Temperature @ 66 psi ASTM D648 162 °F 71 °C
Plaque Haze, % FPC method 10 % 10 %
Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative purposes only;
not to be construed as product specification. Published 2/12, Revised 3/18

10/15

You might also like