Simulation of
Simulation Conex
Simple Model 6M
Date: Wednesday, July 10, 2024
Designer: Solidworks
Study name: Static 1
Analysis type: Static
Table of Contents
Description .......................................... 1
Assumptions ......................................... 2
Model Information ................................. 2
Study Properties .................................... 3
Units ................................................. 3
Description Material Properties ................................ 4
No Data Loads and Fixtures ................................. 5
Connector Definitions ............................. 5
Interaction Information ........................... 6
Mesh information ................................... 7
Sensor Details ....................................... 8
Resultant Forces ................................... 9
Beams ................................................ 9
Study Results ...................................... 10
Conclusion .......................................... 12
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 1
Assumptions
Model Information
Model name: Simulation Conex Simple Model 6M
Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Mirror13
Mass:385.255 kg C:\Jafari\Solidworks\Simul
Volume:0.0500331 m^3 ation\Conex
Solid Body Density:7,700 kg/m^3 6M\Simulation Conex
Weight:3,775.5 N Simple Model 6M.SLDPRT
Jul 10 10:46:38 2024
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 2
Study Properties
Study name Static 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SOLIDWORKS Off
Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document
(C:\Jafari\Solidworks\Simulation\Conex 6M)
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 3
Material Properties
Model Reference Properties Components
Name: Alloy Steel SolidBody
Model type: Linear Elastic Isotropic 1(Mirror13)(Simulation Conex
Default failure Max von Mises Stress Simple Model 6M)
criterion:
Yield strength: 6.20422e+08 N/m^2
Tensile strength: 7.23826e+08 N/m^2
Elastic modulus: 2.1e+11 N/m^2
Poisson's ratio: 0.28
Mass density: 7,700 kg/m^3
Shear modulus: 7.9e+10 N/m^2
Thermal expansion 1.3e-05 /Kelvin
coefficient:
Curve Data:N/A
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 4
Loads and Fixtures
Fixture name Fixture Image Fixture Details
Entities: 8 face(s)
Type: Fixed Geometry
Fixed-1
Resultant Forces
Components X Y Z Resultant
Reaction force(N) -8.39576 9,796.54 11.0151 9,796.55
Reaction Moment(N.m) 0 0 0 0
Load name Load Image Load Details
Entities: 3 face(s)
Type: Apply normal force
Value: 9,800 N
Force-1
Connector Definitions
No Data
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 5
Interaction Information
No Data
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 6
Mesh information
Mesh type Solid Mesh
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 40 mm
Minimum element size 2 mm
Mesh Quality High
Mesh information - Details
Total Nodes 243448
Total Elements 117696
Maximum Aspect Ratio 2,204.3
% of elements with Aspect Ratio < 3 0.388
Percentage of elements with Aspect Ratio > 10 89.1
Percentage of distorted elements 0
Time to complete mesh(hh;mm;ss): 00:00:19
Computer name:
Mesh Quality Plots
Name Type Min Max
Quality1 Mesh - -
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 7
Simulation Conex Simple Model 6M-Static 1-Quality-Quality1
Sensor Details
No Data
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 8
Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -8.39576 9,796.54 11.0151 9,796.55
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0
Free body forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -456.624 753.316 -61.6691 883.06
Free body moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 1e-33
Beams
No Data
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 9
Study Results
Name Type Min Max
Stress1 VON: von Mises Stress 1.042e+03N/m^2 3.104e+08N/m^2
Node: 179679 Node: 240850
Simulation Conex Simple Model 6M-Static 1-Stress-Stress1
Name Type Min Max
Displacement1 URES: Resultant Displacement 0.000e+00mm 1.107e+00mm
Node: 298 Node: 26014
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 10
Simulation Conex Simple Model 6M-Static 1-Displacement-Displacement1
Name Type Min Max
Strain1 ESTRN: Equivalent Strain 1.307e-09 7.298e-04
Element: 32886 Element: 104087
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 11
Simulation Conex Simple Model 6M-Static 1-Strain-Strain1
Conclusion
Analyzed with SOLIDWORKS Simulation Simulation of Simulation Conex Simple Model 6M 12
