TECHNICAL DATA SHEET

SUPERSEAL 2800 Silicone Sealant

Revision Date : 12 Nov 2019 Revision No. 1 Number of Pages : 2

PRODUCT DESCRIPTION
SUPERSEAL 2800 General Purpose Silicone Sealant is a single component Acetic cure sealant, which is cured by atmospheric moisture to form a
high strength waterproof seal. It is multi-purpose silicone sealant which is flexible and has a powerful anti-fungicide property to prevent
mould/bacteria growth.

TECHNICAL PROPERTIS

Properties Test Method Unit Specifications

Chemical Base 1-C Silicone
Cure Mechanism Moisture
Cure Type Acetoxy
Joint Movement Capability ASTM C719 % ± 25
As Supplied @ 25°C, 50% RH
Color Clear, White, Black
Consistency Homogeneous paste
Specific Gravity ASTM D 1475 0.94 + 0.02
Flow Properties ASTM C 639 mm 0 (Non-sag)
Skin Over Time ASTM C 679 minutes Approx. 10
Tack Free Time ASTM C 679 minutes Approx. 20
Depth Cure, 24 hrs Lab Test mm ~ 2.0
As Cured – 7 Days @ 25°C, 50% RH
Hardness (Shore A) ASTM D 2240 Points 14 – 18
Tensile Strength ASTM D 412 N/mm2 < 1.40
Elongation ASTM D 412 % < 900
Young’s Modulus ASTM D 412 MPa < 0.24
Service Temp. °C -5 to +150 0C
Application Temp. °C 5 to 45
Note:
* Curing time (Skin Over Time & Tack Free Time) may vary depending on climatic condition during application.
* Information on this data sheet is subject to change without prior notice and should not be used for writing
2. specifications

TYPICAL USES KEY FEATURES

 Interior Applications Only
 Sealing around bathtubs, shower, basins and other sanitary  Muiti-Purpose
wares  100% Silicone
 As an adhesive for fixing U-PVC trims, cladding, and panels  Anti-Fungal & Anti-Bacterial
 Sealing around metal, timber and U-PVC window frames and
pointing around
 window and door frames
 For aluminium gutter sealing
 General Draught proofing
AMI | TDS | [email protected] | www.muqarram.com Page 1 of 2
 SUPERSEAL General Purpose Silicone Sealant is available in Clear, White, Black and Grey. RAL*
COLORS colors are available upon request.
*Special color orders may require lead time and minimum order quantities.
PACKAGING SUPERSEAL General Purpose Silicone Sealant is available in standard caulking cartridges and 200 Liter drum.
The substrate areas that will be in contact with sealant must be clean, dry and free of all loose materials, dust,
SURFACE PREPARATION dirt, rust, oil and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean,
lint - free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the
surface
TOOLING AND FINISHING Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in
one continuous stroke. Remove masking tape immediately after tooling is completed.
Uncured sealant may be removed from tools, equipment and non-porous surfaces with solvents. For
CLEANUP AND REMOVAL porous substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured
sealant can only be removed mechanically.
Not paintable. May not be suitable to join sensitive natural stones such as marble, granite or quartz, as this
may cause staining. Not to be used in contact with sensitive metals such as lead, copper, brass, zinc, carbon
LIMITATIONS steel, galvanized iron or magnesium as corrosion may occur during acetic acid release/sealant cure. Substrate
compatibility test is always recommended.
When stored in original unopened container at or below 77°F (25°C) in dry warehouse
STORAGE AND SHELF LIFE
conditions, SUPERSEAL General Purpose Silicone Sealant has a shelf life of
12 months from manufacturing date. Containers should always be kept sealed when not in use.
Use in well-ventilated area. Direct contact of uncured sealant irritates eyes and may irritate skin. Over
exposure to vapor may irritate eyes, nose and throat. Do not handle contact lenses with sealant on hands. In
HANDLING PRECAUTIONS case of eye contact, flush eyes with water for 15 minutes. Obtain medical attention. In case of skin contact,
remove from skin and flush with water.
K E EP OU T OF REA CH OF CHILDR EN • K E EP CONTA INER TIG HTLY CLOSE D • FOR INDUSTRIAL & PROFESSIONAL USE

The information and data contained herein is believed to be accurate and reliable; however, it is the user’s responsibility to determine suitability of use. Since the
supplier cannot know all the uses, or the conditions of use to which these products may be exposed, no warranties concerning the fitness or suitability for a particular
use or purpose are made. AMI reserves the right to change the properties of its products without notice

AMI | TDS | [email protected] | www.muqarram.com Page 2 of 2