Scribd
Upload
113 views2 pages

HXXD1V2WC020505360T0H

The document provides specifications for the Indoor SISO Omni Antenna, covering frequency bands from 698-960MHz to 3400-3800MHz with various electrical and mechanical details. It highlights key features such as gain, beamwidth, VSWR, and environmental ratings. Installation instructions are also included, detailing the steps to mount the antenna on the ceiling.

Uploaded by

İlker Çırakoğlu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views2 pages

HXXD1V2WC020505360T0H

The document provides specifications for the Indoor SISO Omni Antenna, covering frequency bands from 698-960MHz to 3400-3800MHz with various electrical and mechanical details. It highlights key features such as gain, beamwidth, VSWR, and environmental ratings. Installation instructions are also included, detailing the steps to mount the antenna on the ceiling.

Uploaded by

İlker Çırakoğlu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Indoor SISO Omni Antenna, 698–960MHz, 1710–2700MHz, 3400–3800MHz

Fiberhome DAS Solutions—Antenna


HXXD1V2WC020505360T0H

Electrical Specifications
Frequency Band, MHz 698~960 1710-2200 2300~2700 3400-3800

Polarization Vertical

Gain, dBi ≥2 ≥5 ≥5 ≥5

Beamwidth, Horizontal, degrees 360 360 360 360

Beamwidth, Vertical, degrees(typical) 85 60 40 40

VSWR ≤2.0 ≤2.0 ≤2.0 ≤2.0

IMD3, dBc ≤-140@+33dBm*2

Input Power per Port, maximum, watts 50

Impedance, ohm 50

Mechanical Specifications
Connector Interface 1 x4.3-10-female

Dimension, mm Φ203×115

Net Weight, Kg 0.37

Radome Material ABS

Pigtail Length, mm ≥150

Environmental Specifications
Operating Temperature -40°C to +60 °C

Relative Humidity ≤ 95%

IP Rating / Env. Protection IP30

Azimuth Pattern

900M Horizontal 900M Vertical 1800M Horizontal 1800M Vertical


Installation Instructions
1, Drill a hole in the ceiling ,the diameter of the hole is 20mm.
2, Place the cable across the ceiling, then fix the antenna to the
ceiling by the nut.

You might also like