Scribd
Upload
66 views2 pages

HXBG1V2WC070808090T0H

The document provides specifications for the Indoor SISO Panel Antenna covering frequency bands from 698-3800MHz with a gain of at least 7 dBi across all bands. It includes details on electrical, mechanical, and environmental specifications, such as beamwidth, VSWR, and operating temperature. Installation instructions are also provided for mounting the antenna on a wall.

Uploaded by

İlker Çırakoğlu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views2 pages

HXBG1V2WC070808090T0H

The document provides specifications for the Indoor SISO Panel Antenna covering frequency bands from 698-3800MHz with a gain of at least 7 dBi across all bands. It includes details on electrical, mechanical, and environmental specifications, such as beamwidth, VSWR, and operating temperature. Installation instructions are also provided for mounting the antenna on a wall.

Uploaded by

İlker Çırakoğlu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Indoor SISO Panel Antenna, 698–960MHz, 1710–2700MHz.

3400-3800MHz
Fiberhome DAS Solutions—Antenna
HXBG1V2WC070808090T0H

Electrical Specifications
Frequency Band, MHz 698~960 1710-2200 2300~2700 3400-3800
Polarization Vertical
Gain, dBi ≥7 ≥7 ≥7 ≥7
Beamwidth, Horizontal, degrees 85±20 65±20 60±20 60±20
Beamwidth, Vertical, degrees(typical) 75 60 50 30
VSWR ≤2.0 ≤2.0 ≤2.0 ≤2.0
Front to Back Ratio, dB ≥8 ≥10 ≥15 ≥10
IMD3, dBc ≤-140@+33dBm*2
Input Power per Port, maximum, watts 50
Impedance, ohm 50
Mechanical Specifications
Connector Interface 1 - 4.3-10 Female

Dimension, mm 180*170*60

Net Weight, kg 0.4

Radome Material， ABS,White, RAL9003

Pigtail Length, mm ≥150

Environmental Specifications
Operating Temperature, °C -40 to +60

Relative Humidity ≤ 95%

IP Rating / Env. Protection IP30

Azimuth Pattern

900M Horizontal 900M Vertical 1800M Horizontal 1800M Vertical


Installation Instructions
1, Use the mounting base to mark and draw four holes on the wall

and drill them.


2, Install a wall anchor in each hole.
3, Use M4*25 Philips screws to fix the mounting base to the wall.
4, Install the antenna by hanging it on the mounting base.

You might also like