1-1920-[Category] Equipment Operation & Technical manual –Vol I Rev.

-
11/2/2021 Chapter: Overall information and specifications HN [Keywords]

Equipment Operations & Technical

Manual
ERMA FIRST BWTS FIT-100 for HN 323/329

Vol. II – System Drawings

Generic OMSM rev.06 Dated 10/06/2019

© ERMA FIRST ESK ENGINEERING SOLUTIONS

Schisto Industrial Park ( VIPAS ), Block 13, Keratsiniou–Skaramagas Ave,
188 63, Perama, Greece
Tel: (+30) 2104093000 / Fax: (+30) 2104617423
E-mail: [email protected]
 603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

The current Operation Safety and Maintenance Manual (OMSM) is in line with the Generic Operation
Safety and Maintenance Manual (OMSM) revision 6, dated 10 June2019, as this has been approved
by the USCG TAC 162/060/6/3.

The Rev. number of this document stated on the headers of each page indicate the ship specific
OMSM revision as per vessel's class and flag requirements, but at no case diverts from the operation
principles described on the Generic OMSM Rev.06.

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 2
 603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

Copyright ERMA FIRST ESK ENGINEERING SOLUTIONS SA

All rights reserved.

The data contained in this document is proprietary to ERMA FIRST ESK ENGINEERING SOLUTIONS SA

You are respectfully reminded that none of the following may be directly or indirectly released,
reproduced, modified or used in anyway without the explicit permission of ERMA FIRST S.A., neither
can it be used for the reproduction of the BWT System or any of its components.

All specifications included in this manual are subject to change without notice

ERMA FIRST ESK Engineering Solutions S.A. shall not be responsible or liable for damages resulting from
misapplication or misuse of its products.

Contact Details:

ERMA FIRST ESK Engineering Solutions S.A.

Schisto Industrial Park ( VIPAS ), Block 13,

Keratsiniou–Skaramagas Ave,
188 63, Perama, Greece
Tel: (+30) 2104093000 / Fax: (+30) 2104617423
E-mail: [email protected]
WEB: http://www.ermafirst.com/

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 3
 603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

Overall information and specifications

BWTS model: ERMA FIRST BWTS FIT-100

Vessel name IMO Number Hull Number Project Number ERMA FIRST BWTS S/N

CELTIC SPIRIT 9136204 323 002-003247 2021002218

CELTIC WARRIOR 9129134 329 002-003248 2021002219

Document No: 603-09-3247

Document Revision -

Date 11/2/2021

BWTS capacity: 135 m³/h

Max. power consumption: 24.12 kW

Cooling Water flow: 0.3 m³/h

Ballast water temperature range: -2° – 40° C

Minimum conductivity/ salinity in reactor: 1.07 PSU at -2° C/ 0.9 PSU at 3° C

Average operation pressure: 0.5 - 5 bar

Approved for use in explosive atmospheres: No

Max. allowable dosage concentration of

10 mg/L
active substances:

Holding time: not applicable

Max. allowable discharge concentration of

< 0.1 mg/L
active substances:

Max. Hydrogen gas generation: ≤ 1.6% vol. (40% LEL)

Max. differential pressure across filter, prior to

0.3 bar
flushing:

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 4
 603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

Revision details
Rev. Nr. Date Description Created Checked Approved

00 11/2/2021 Original Volume ll of Operation Manuals I.LEONTI I.LEONTI A.ADAMI

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 5
 603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

INDEX
OVERALL INFORMATION AND SPECIFICATIONS

REVISION DETAILS

INDEX

SYSTEM DIAGRAMS
EQUIPMENT DRAWINGS
PART DRAWINGS

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 6
603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

System diagrams

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 7
603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

Piping & Instrumentation Diagram 3247-10100-01

All Connections Diagram 3247-10100-03

Detailed electrical wiring diagram 3247-10100-04

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 8
 6 5 4 3 2 1

INITIAL RELEASE 22/10/2020 L.XAGORARIS

D D
1)REVISED DIAGRAMS C.DALIANIS

C C

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE RELEASE DATE INFORMATION. SUCH INFORMATION SHALL
SPECIFIED (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS ARE IN MILLIMETERS DESCRIPTION
A DIMENSIONS IN BRACKETS ARE CHECKED BY A
INCHES
SIZE DOCUMENT ID REV.
DIAGRAM IS IN ACCORDANCE APPROVED BY
WITH AMERICAN NATIONAL
STANDARD ANSI/ISA-5.1-2009 TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 9
 6 5 4 3 2 1
SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION

VALVES AND COCKS VALVES AND COCKS ACTUATORS AND INSTRUMENTS CONNECTIONS - VARIOUS ITEMS

M
GLOBE GLOBE ELECTRIC MOTOR ACTUATOR EXPANSION JOINT

D ANGLE
GENERIC STOP VALVE

ANGLE
SELF CLOSING VALVE
M
ELECTRIC MOTOR ACTUATOR WITH POSITIONER Y-TYPE STRAINER
D
E
GLOBE VALVE GLOBE ELECTRIC ACTUATOR Y-TYPE STRAINER WITH VALVE

RELIEF VALVE
E
3-WAY VALVE ANGLE ELECTRIC ACTUATOR WITH POSITIONER BASKET STRAINER

LS
GLOBE PRESSURE REGULATING VALVE LIMIT SWITCH FILTER

CHECK VALVE

ANGLE GLOBE INSTRUMENT DEVICE AND FUNCTION SYMBOLS OVERBOARD

EMERGENCY SHUT-OFF VALVE

XXX DISCRETE INSTRUMENT LOCATED IN FIELD. NOT PANEL, CABINET
GLOBE ANGLE OR CONSOLE MOUNTED, VISIBLE AT LOCATION AND NORMALLY BELLMOUTH
YYY
OPERATED ACCESSIBLE.
SCREW DOWN STOP CHECK VALVE
XXX BASIC PROCESS CONTROL SYSTEM LOCATED IN FIELD. NOT
ANGLE GLOBE YYY
PANEL, CABINET OR CONSOLE MOUNTED, VISIBLE AT LOCATION PIPE CONNECTION
AND NORMALLY OPERATED ACCESSIBLE.
COCK
BASIC PROCESS CONTROL SYSTEM LOCATED IN OR ON FRONT

C SPRING LOADED CHECK VALVE ANGLE

XXX
YYY
OF CENTRAL OR MAIN PANEL OR CONSOLE, VISIBLE ON FRONT
PANEL OR ON VIDEO DISPLAY, NORMALLY OPERATOR
ACCESSIBLE AT PANEL FRONT OR CONSOLE.
BASIC PROCESS CONTROL SYSTEM LOCATED IN OR ON FRONT
NO PIPE CONNECTION
C
XXX OF SECONDARY OR LOCAL PANEL OR CONSOLE, VISIBLE ON
SWING CHECK VALVE COCK, THREE-WAY L-PORT IN PLUG SLOPE
YYY FRONT PANEL OR ON VIDEO DISPLAY, NORMALLY OPERATOR
ACCESSIBLE AT PANEL FRONT OR CONSOLE.

XXX SAFETY INSTRUMENT SYSTEM LOCATED IN FIELD, NOT PANEL,

DUAL PLATE CHECK VALVE COCK, THREE-WAY T-PORT IN PLUG YYY CABINET OR CONSOLE MOUNTED, VISIBLE AT LOCATION AND DRAIN
NORMALLY OPERATOR ACCESSIBLE.

BALL VALVE COCK, FOUR-WAY STRAIGHT THROUGH L-PORT IN PLUG PIPE FITTINGS OFF CONNECTION

GATE VALVE ACTUATORS AND INSTRUMENTS CONCENTRIC REDUCER OFF PAGE CONNECTION

BUTTERFLY VALVE S SOLENOID ECCENTRIC REDUCER CONNECTION TO/FROM CONTROL AIR HEADER

DIAPHRAGM VALVE PISTON ACTUATOR BLIND FLANGE LINE SYMBOLS

GLOBE PISTON ACTUATOR WITH POSITIONER FLANGE JOINT CONNECTION AIR LINE

B ANGLE
NEEDLE VALVE

GENERAL ACTUATOR SPRING-DIAPHRAGM ACTUATOR FLANGED CONNECTION FOR VALVES & SPECIALTY ITEMS) ELECTRONIC/ELECTRICAL SIGNAL
B
PLUG VALVE GENERAL ACTUATOR SPRING-DIAPHRAGM ACTUATOR WITH
POSITIONER PLUG FLEXIBLE HOOSE

FOOT VALVE GENERAL ACTUATOR TO MOUNTED HAND WHEEL CAP ERMA FIRST SCOPE OF SUPPLY

E
REGULATING GLOBE VALVE H ELECTROHYDRAULIC ACTUATOR HOSE CONNECT OPTIONAL EQUIPMENTS

E
H
GLOBE ELECTROHYDRAULIC ACTUATOR WITH POSITIONER ORIFICE PLATE ● ● ● PROCESSOR COMMUNICATION

SAFETY VALVE
A
ANGLE AIR MOTOR ACTUATOR BLIND FLANGE WITH HALF-COUPLING SYSTEM SPECIFIC COMPONENT

A
KNIFE VALVE AIR MOTOR ACTUATOR WITH POSITIONER SOCKET

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 10
 6 5 4 FR
3 2 1
F01
FT JS
FIC F01 FI FR FA PI PR PA TS01
F01 F01 F01 F01 P01 P01 P01
FIC PIT TSH
F01 P01 TS01
FM-1-A PIT-2-A
TS-1-A UC TAH
FIT TS01 TS01

D WATER BALLAST TANKS BAL-P-05 SEE DETAIL 11

F01 SEE DETAIL 10 ZIT
D

PAGE 5/8-CAH
TROS-M-1

SEE DETAIL 3
V1-03 2X VALVES
V1-03 PRV-1-A ZIC

SEE DETAIL 5

SEE DETAIL 5

TROS-M-1
S

TROR

TROR
PAGE 5/8-CAH PAGE 5/8-CAH P01 ZI

LS
T-1-A
ZI PRV-1-A
P01

FS-1-A
S
SEE DETAIL 1 ZI

BAL-P-4.1

Max. = 1xD
MI MT MI M01
TRO1 M01/M02 M01/M02 M01/M02 PAH
D PS01 JS
MR ZIC PS01

PAGE 4/8
M01/M02 M01

V3-02
UC

LS
MA PS01
B M01/M02 PSH
C PAGE 4/8 PS01
DN15 MANUAL
CONNECTING WITH PIPING SAMPLING
B PS-1-A Ø10
LEADING TO WEATHER DECK

DN15
SS316 TUBE
PI PI
LSH M01/M02 M01/M02
L01
DAP1 NA
PI VI C-1-A NS01
LS-2-A
LI LAH
L01 L01 NR
NS01
TGDT

C 150L
V1-01
PAGE 5/8-CAH
PCM1 DN15
A PAGE 4/8
NI
NS01
H2-1-A
C

A
LS-1-A
LI PCM1
PG PG L01 PAGE 5/8-CAH
L01 L01 DN15
E PAGE 4/8 NT

V1-01
ZIC

LS
NS01
LSL ZI
V1

DAP3 F01 PIC

PI VPI L01 M01/M02 M01/M02
ZIT SEE DETAIL 6
ZIC
G DN15 DN15 F01 M01/M02

SDNR1
V3-01
LS
V2 NRV1
PA
PCM3 BAL-P-02 CI CR CA 01

BAL-P-3.1
P01
P

PCM3 C01 C01 C01

PAGE 5/8-CAH 01 GV01
PR

FFL-P-02
CI P01
ZI PIC PA PIT V5-01-A

CV01
C01
M01/M02 M01/M02 PI P01 P01 PAGE 5/8-CAH

ZIC CT P01 ZIC

PIT-3-A
PIT PR
M01/M02 C01 P01 P02
P01
G FR FIC FT FIC SEE DETAIL 8
F01 F01 F01 F01 PI PI PI
SMD-1-A PIT-1-A ZIT P02 IAH
P01 P02 P02
V1-02
PAGE 5/8-CAH
FROM BALLAST PUMPS BAL-P-01 F-1-A LS VPI PI
SEE DETAIL 7
V1-02 SP-1-A
PI PI
C01 C01 FR FIC Min=2*D FFL-P-01

NRV2
FT FIC
C01 C01 C01 C01 V5-01-A V4 V5

B FROM D.B. /SIDE TANKS FWM-P-01

VPI
SWP1
PI
V6-01
PAGE 5/8-CAH

FWM-P-02
B
NO.3 PS & STBD V3 V6 V6-01

01

NOTE 1: FLOW METER TO BE INSTALLED IN STRAIGHT LINE, REFER TO DETAIL 10. RESPECTIVELY
NOTE 2: DAP TO BE PLACED AS CLOSE AS POSSIBLE TO THE SAMPLING POINTS.
NOTE 3: SAMPLE AND RETURN LINES TO TRO SENSORS TO BE GALVANIZED STEEL DN15.
NOTE 4: BISULFITE INJECTION LINE TO BE STAINLESS STEEL SS316.
NOTE 5: CHEMICAL CLEANING SPOOLS TO BE INSTALLED PRIOR AND AFTER EVERY CELL
CHEMICAL CLEANING SPOOL SPECS (PROPOSED):
PIPE MATERIAL: STEEL MILD, EPOXY COATED
EPOXY SUPPLIER: HEMPEL
ADDITIONAL TREATMENT
INNER PIPE: 35870, HEMPADUR MULTI-STRENGTH
17360 EPOXY ZINC, 45880 HEMPADUR MASTIC, 55210 POLYOURETHANE

A NOTE 6:
NOTE 7:
OUTER PIPE COLOUR: MUNSELL 7.5 BG 7/2
TROR SHOULD BE PLACED ON A LINE THAT ALLOWS WATER FLOW BOTH DURING BALLASTING AND DE-BALLASTING
WHEN ELECTROLYTIC CELL IS INSTALLED AT HORIZONTAL CONFIGURATION, THE FLOW SWITCH SHOULD BE PLACED
DESCRIPTION A
ON THE TOP SIDE OF PIPE.
NOTE 8: FOR INSTALLATIONS WITH MULTIPLE BIS, BRANCHES SHOULD BE DESIGNED SO AS TO HAVE EQUAL PRESSURE DROP.
SIZE DOCUMENT ID REV.
NOTE 9: PRESSURE SENSOR MODULE PLACED BETWEEN FILTER AND CELL (PIT3) TO BE INSTALLED AS CLOSE AS POSSIBLE
TO THE FILTER'S OUTLET. TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 11 1
 6 5 4 3 2 1
SEE DETAIL 1
MI MT MI
TRO2 M01/M02 M01/M02 M01/M02

MR
LAH M01/M02
L01
MA

D IAH
M02
YC
M02
LI
L01
FIC
M02
PI
M02
PI PI
C PAGE 2/6
MANUAL
SAMPLING
M01/M02
DN15 PAGE 3/8 D
D
FRESH WATER M M02 M02
SUPPLY FIC NATS
FLS PI DAP2
ZIC M02

S
M02 VI PI

ZI DN15 F H DN15
M02 SS316
NAT1 DP1
ZIC A ZIC ZIC PCM2

PAGE 3/8

A
M02 M02 M02 PCM2
PAGE 5/8-CAH
DRIP TRAY PIC
DRAIN ZI
DTV M02

SS316
DN15
DN15
M02
ZI ZI ZI ZIC
M02 M02 M02 M02
TROS-M-2 BIS-M-1 TROS-M-3

SEE DETAIL 2
SEE DETAIL 3

SEE DETAIL 3
PAGE 5/8-CAH PAGE 5/8-CAH PAGE 5/8-CAH

SEE DETAIL 4
TROS-M-2

TROS-M-3
BIS-M-1

G2S-M
FROM BALLAST PUMPS

C E
F
Min=5*D

H
102-1 C

PAGE 3/8
ZIC ZIC ZIC
M02 M02 M02

FROM BALLAST TANKS

SS316
DN15

DN15
DN15
ZI ZI ZI
M02 M02 M02
TROS-S-1 BIS-S-1 TROS-S-2

S
PAGE 5/8-CAH PAGE 5/8-CAH

SEE DETAIL 3

SEE DETAIL 3
PAGE 5/8-CAH
DRIVING WATER

SEE DETAIL 4
TROS-S-1

TROS-S-2
STRIPPING EDUCTOR

BIS-S-1
DETAIL 11: VACUUM BREAKER FLANGE CONNECTION Min=5*D
DETAIL 10: FLOW METER INSTALLATION
INSTALLATION CONDITIONS FOR ABB FLOW METER
FOR FUTURE INSTALLATION

DN100
103-1
B B
2XDN 3XDN
FLOW DIRECTION
DETAIL 6: CHEMICAL CLEANING DETAIL 7: FRESH WATER DETAIL 8: FILTER DETAIL 9: CELL INSTRUMENTS
SPOOL CONNECTION
SEE NOTE 5
PDA IAH
P02 TI TR TA
T01 T01 T01
PDR
Max. = 1xD P02
PDG FA FSL TT
F01 T01
P02 F01

PDS FI T
FS
45° P02 F01

DN40

DETAIL 1: TRO1,2 SENSOR SAMPLING PIPES ARRANGEMENT DETAIL 2: G2 SAMPLING PORT DETAIL 3: TRO SENSOR SAMPLING PORT DETAIL 4: BISULFITE INJECTION DETAIL 5: TRO RETURN PORT
POINT
SHIPYARD
SUPPLY
Min. = 800mm

A TRO MANUAL
SAMPLING DESCRIPTION A
INLET SIZE DOCUMENT ID REV.
FLEX.
HOSE
TRO
FLOW DIRECTION FLOW DIRECTION FLOW DIRECTION FLOW DIRECTION
DRAIN TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 12 1
 6 5 4 3 2 1
VESSEL'S EXISTING VALVES MONITORING

VALVES SIGNAL

D ZI
D
LS
IIC YI YA
106-1
ZIT
FSP-1-A

ZI

LS
106-2 URC UI IIC YI YA
ZIT

FCWPSP1
ZI
LS

MS1
106-3 CP1
ZIT 01

ZI
LS

UIC
106-4
SWPSP1
ZIT

ZI
LS

C 106-5
ZIT C
IIC YI YA
ZI
LS

106-6
ZIT
CONTROL AIR HEADER
ZI
LS

109-3
ZIT

CAH Ø8 x1.0T CONTROL AIR, 5.5-7 bar

PAGE 3/8-V1-01 COPPER

CONTROL AIR
CAH Ø8 x1.0T CONTROL AIR, 5.5-7 bar
PAGE 3/8-V1-02 COPPER
CAH Ø8 x1.0T CONTROL AIR, 5.5-7 bar
PAGE 3/8-V1-03 COPPER
CAH Ø8 x1.0T CONTROL AIR, 5.5-7 bar CONTROL AIR, Ø8 x1.0T - CAH
PAGE 3/8-V5-01-A COPPER max.8 bar COPPER PAGE 6/8-CWS-1-A

CAH Ø8 x1.0T CONTROL AIR, 5.5-7 bar

PAGE 3/8-V6-01 COPPER

B CAH
PAGE 3/8-PRV-1-A

CAH
Ø8 x1.0T
COPPER

Ø8 x1.0T
CONTROL AIR, max.8 bar

CONTROL AIR, max.8 bar

B
PAGE 3/8-TROS-M-1 COPPER

DN25
CAH Ø8 x1.0T CONTROL AIR, max.8 bar
PAGE 4/8-TROS-M-2 COPPER
CONTROL AIR <8 bar Ø10 COPPER TUBE [AIR SIGNAL] CAH
CAH Ø8 x1.0T CONTROL AIR, max.8 bar PAGE 3/8-PCM1
PAGE 4/8-TROS-M-3 COPPER
CAH Ø8 x1.0T CONTROL AIR, max.8 bar DN25 CONTROL AIR <8 bar Ø10 COPPER TUBE [AIR SIGNAL] CAH

DN25
PAGE 4/8-TROS-S-1 COPPER PAGE 4/8-PCM2

CAH Ø8 x1.0T CONTROL AIR, max.8 bar

PAGE 4/8-TROS-S-2 COPPER CONTROL AIR <8 bar Ø10 COPPER TUBE [AIR SIGNAL] CAH
PAGE 3/8-PCM3
CAH Ø8 x1.0T CONTROL AIR, max.8 bar
PAGE 4/8-BIS-M-1 COPPER
CAH Ø8 x1.0T CONTROL AIR, max.8 bar
PAGE 4/8-BIS-S-1 COPPER

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 13 1
 6 5 4 3 2 1
T/R SPECIFICATIONS
BWTS FIT 100
T/R MODULES 2-M
COOLING WATER CAPACITY 1 X 0.3 m3/h

D D

IIC

C EI
M01
M01
C
IIC IR TAH
ZIC T/R-1-A M01 M01 M01
CAH M01
FRESH COOLING WATER

PAGE 5/8-CWS-1-A

FRESH WATER COOLING

WATER HEADER RETURN
GI1 TI1 ZI GI2 TI2
HEADER SUPLLY

M01
S
COOLING WATER INLET <40oC CW-P-01 COOLING WATER OUTLET CW-P-02
FW01 CWS-1-A FW02

B B

A DESCRIPTION A
NOTE 10: COOLING WATER QUALITY MUST BE LOW CONDUCTIVITY WATER (POTABLE OR TECHNICAL WATER). NOT ACID WATER .
NOTE 11: PRESSURE ON T/R INLET 2 BAR< P < 5 BAR SIZE DOCUMENT ID REV.
NOTE 12: COOLING WATER TEMPERATURE < 40oC
NOTE 13: PRESSURE DROP MAX. 2 BAR/TR
TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 14
 6
BWTS STANDARD PIPE DIAMETER
5 4 3 2 1
NOTES: VALVE ARRANGEMENT BWTS VALVES
BWTS SYSTEM NON-EX/EX 1. INTERLOCK WILL BE ACTIVATED WHEN ALL CONDITIONS MARKED INTERLOCKS
WITH "O" OCCUR.

CONDITION

VALVE NOT CLOSED

VALVE NOT CLOSED

PIPE TAG NAME FILTREX 2. INTERLOCK WILL BE ACTIVATED WHEN ANY OF THE CONDITIONS
BAL-P-01 DN150 MARKED WITH "X" OCCURS.

VALVE CLOSED
VALVE CLOSED
VALVE CLOSED
VALVE CLOSED
VALVE CLOSED
VALVE CLOSED
VALVE CLOSED

VALVE CLOSED

VALVE CLOSED

VALVE CLOSED
VALVE CLOSED

VALVE CLOSED
3. NOTES 1 AND 2 APPLY IN ALL INTERLOCK TABLES.
D D

IN OPERATION

IN OPERATION
BAL-P-02 DN150

VALVE OPEN
BAL-P-03.1 DN150
BAL-P-04.1 DN150/DN1003
BAL-P-05 DN100/DN1504
FFL-P-01 DN65/DN505
FFL-P-02 DN32/DN656
FRESH WATER MODULE

Nr G
FOR FIT NON-EX/EX

TA
SMALL

V1-01
V1-01
V1-02
V1-02
V1-03
V1-03
V3-01
V3-01
V3-02
V3-02
106-1
106-2
106-3
106-4
106-5
106-6
109-3
FWM-P-01 DN65
FWM-P-02 DN50
COOLING WATER MODE 1: BALLASTING WITH NO,1 BALLAST PUMP I1 O O O O O O O O O O
PIPE DIAMETER
CW-P-01 DN20 MODE 2: BALLASTING WITH NO.2 BALLAST PUMP I2 O O O O O O O O O O
CW-P-02 DN20 MODE 1: DE-BALLASTING WITH NO,1 BALLAST PUMP THROUGH 102-1 O O O O O O
I3
MODE 2: DE-BALLASTING WITH NO.2 BALLAST PUMP THROUGH 102-1 I4 O O O O O O
C MODE 3: DE-BALLASTING WITH NO,1 AND NO.2 BALLAST PUMP THROUGH
102-1 I5 O O O O O O C
MODE 4: DE-BALLASTING WITH GRAVITY THROUGH 102-1 I6 O O O O O O
MODE 5: DE-BALLASTING WITH BALLAST EDUCTOR THROUGH 103-1 I7 O O O O O O

O O
MODE 6: EMERGENCY BALLASTING I8 O O
OFF I9 O O O O O O O O

Notes: ADDITIONAL INTERLOCKS

CONDITION

NOT CLOSED

ACTIVATED (P≥5BAR)
VALVE NOT CLOSED

ACTIVATED (T>40°C)
FLOW READING≥20%

FLOW READING<20%
CLOSED

VALVE CLOSED
DEACTIVATED

DEACTIVATED
B B

ACTIVATED

ACTIVATED

VALVE
VALVE
G
TA
Nr

V3-01
V3-01
V3-02
V3-02
FS1
FS1
FS2
FS2
FM

TS
PS
FM
ALLOW POWER TO ELECTROLYTIC CELL 1 I10 O O O O
CUT POWER TO ELECTROLYTIC CELL 1 I11 X X X X
INDEPENDENT SAFETY SYSTEM SHUTDOWM I12 X X

A NOTES FOR THE PID STANDARD PIPE SIZING:

1.
2.
REDUCER
REDUCER
SIZE
SIZE
FOR FILTER INLET CONNECTIO
FOR FILTER OUTLET CONNECTION
SERVICE IDENTIFICATION
BAL-P: BALLAST PIPING
LINE DATA IDENTIFICATION LINE DATA IDENTIFICATION EXAMPLE DESCRIPTION A
3. REDUCER SIZE FOR CELL OUTLET AND FM CONNECTION FFL-P: FILTER FLUSHING PIPING XXX-P-YY BAL-P-01
4.
5.
REDUCER
REDUCER
SIZE
SIZE
FROM FM TO BALLAST TANKS CONNECTION
FOR SP/SWP INLET CONNECTION
FWM-P:
FPM-P:
FRESH WATER MODE PIPING
FILTER PRESERVATION MODULE PIPING
SIZE DOCUMENT ID REV.
6. REDUCER SIZE FOR SP/SWP OUTLET CONNECTION APT-P: APT MODULE PIPING IDENTIFICATION No. TAG No. OF THE PIPING
SERVICE BALLAST
TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 15 1
 6
FUNCTION IDENTIFICATION TABLE
5 4
LOOP IDENTIFICATION TABLE
3 2 1
COMPONENT IDENTIFICATION TABLE - MAIN SYSTEM
PID Description CODE LOOP DESCRIPTION Index TAG Nr DESCRIPTION
CODE 1 F FILTER
BA FILTER LOCAL ALARM C01 SALINITY CONTROL
2 SP SUCTION PUMP
CA SALINITY ALARM F01 FLOW CONTROL C
3 ELECTROLYTIC CELLS
CI SALINITY INDICATOR L01 LEVEL CONTROL (TGDT) TRO CHLORINE SENSORS
D CR
CT
SALINITY RECORDER
SALINITY TRANSMITTER
M01
M02
CHLORINE CONTROL (BALLAST)
CHLORINE CONTROL (DE-BALLAST)
4
5
6
FM
DP
FLOW METER
DOSING PUMP
D
EI VOLTAGE INDICATOR NS01 HYDROGEN CONCENTRATION SAFETY V1-01
7 REMOTELY OPERATED VALVE , SYSTEM BYPASS
FA FLOW ALARM P01 PRESSURE CONTROL (MAIN SYSTEM) V1-02
8 FLOW CONTROL VALVE, SYSTEM INLET
FI FLOW INDICATOR P02 PRESSURE CONTROL (MAIN FILTER(S)) V1-03
9 FLOW CONTROL VALVE, SYSTEM OUTLET
FIC FLOW INDICATOR CONTROL PS01 PRESSURE SAFETY V3-01...02
10 GEAR BOX VALVE WITH OPEN/CLOSE LIMIT SWITCH
FIT FLOW INDICATOR TRANSMITTER T01 TEMPERATURE CONTROL V5-01
11 FILTER'S FLUSHING VALVE
FR FLOW RECORDER TS01 TEMPERATURE SAFETY PRV
12 PRESSURE REGULATOR SHUTTER VALVE
FSL LOW FLOW SWITCH FS CELL FLOW SWITCH
FT FLOW TRANSMITTER 13
IAH HIGH CURRENT ALARM 14 PIT PRESSURE INDICATOR
IIC CURRENT INDICATOR CONTROL 15 PI PRESSURE GAUGE, 0-10 BAR
IR CURRENT RECORDER 16 VPI VACUUM GAUGE, -1 +5 BAR
LAH HIGH LEVEL ALARM 17 T TEMPERATURE SENSOR
LI LEVEL INDICATOR 18 SMD SALINITY MEASURING DEVICE
LSH HIGH LEVEL SWITCH 19 DAP DIAPHRAGM AIR PUMPS
LSL LOW LEVEL SWITCH 20 PCM PUMP CONTROL MODULES
C MA
MI
CHLORINE CONCENTRATION ALARM
CHLORINE CONCENTRATION INDICATOR
21
22
PS
TS
PRESSURE SWITCH
TEMPERATURE SWITCH
C
MR CHLORINE CONCENTRATION RECORDER 23 TROR TRO SAMPLE RETURN PORT
MT CHLORINE CONCENTRATION TRANSMITTER 24 TROS TRO SAMPLING PORT
NA HYDROGEN CONCENTRATION ALARM 25 TROS TRO SAMPLING PORT
NI HYDROGEN CONCENTRATION INDICATOR 26 BIS INJECTION PORT
NR HYDROGEN CONCENTRATION RECORDER 27 G2S G2S PORT
NT HYDROGEN CONCENTRATION TRANSMITTER 28 DTV DRIP TRAY BRASS BALL VALVE
PAH HIGH PRESSURE ALARM 29 NATS NEUTRALIZING UNIT CONNECTION SPOOL
PDA DIFFERENTIAL PRESSURE ALARM 30 NAT NEUTRALIZING AGENT PLASTIC DRUM
PDG DIFFERENTIAL PRESSURE GAUGE 31 H2 FIXED HYDROGEN SENSOR
PDIT DIFFERENTIAL PRESSURE INDICATION 32 NRV NON-RETURN VALVE
TRANSMITTER 33 SDNR, FW02 SCREW DOWN CHECK VALVE
PDR DIFFERENTIAL PRESSURE RECORD 34 V1…5, FW01 ISOLATION VALVE
PDS DIFFERENTIAL PRESSURE SWITCH 35 T/R TRANSFORMER RECTIFIER
PDT DIFFERENTIAL PRESSURE TRANSMITTER 36 CWS COOLING WATER SHUTTER
PG PRESSURE GAUGE SEA WATER PUMP
B PI
PIC
PRESSURE INDICATOR
PRESSURE INDICATOR CONTROL
37
38
SWP
CP CONTROL PANEL
REPEATER PANEL
B
39 RP
PIT PRESSURE INDICATOR TRANSMITTER 40 FCP FILTER CONTROL PANEL
PR PRESSURE RECORDER 41 FSP FILTER STARTER PANEL
PT PRESSURE TRANSMITTER 42 SPSP SUNCTION PUMP STARTER PANEL
TAH HIGH TEMPERATURE ALARM 43 SWPSP SEA WATER PUMP STARTER PANEL
TS TEMPERATURE SWITCH 44 MS MOTOR STARTER
TT TEMPERATURE TRANSMITTER 45 TGDT TRO GRAVITY DRAIN TANK
UC MULTIFUCTIONAL CONTROL 46 FCWPSP FRESH COOLING WATER PUMP STARTER PANEL
UIC MULTIVARIABLE INDICATOR CONTROLLER 47 TI TEMPERATURE INDICATOR
YA STATE ALARM 48 GI PRESSURE GAUGE, RANGE 0-6 BAR
YC STATE CONTROLLER
YI STATE INDICATOR
ZA POSITION ALARM
ZI POSITION INDICATOR
ZIC POSITION INDICATOR CONTROL
A ZIT
ZS
POSITION INDICATOR TRANSMITTER
POSITION SWITCH
DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 16
 6 5 4 3 S:
2
(24VDC) DOA-BWTS-13
1
S: (4-20mA) AOA-BWTS-02
S: (4-20mA) AIA-BWTS-02
S: (4-20mA) FMA-BWTS-01
O: (24VDC) PA-BWTS-06
S: (4-20mA) PIA-BWTS-02
S: (24VDC) DOA-BWTS-03
S: (24VDC)DIA-BWTS-02
S: (24VDC)DIA-BWTS-03
S: (4-20mA) FSA-BWTS-01

D FM-1-A PIT2-A
TS-1-A S: (24VDC)
TSA-BWTS-01
S:
PAGE 2/4 6
(4-20mA) TA-BWTS-01

2
D
WATER BALLAST TANKS 3
V1-03 4 CP1
S

TRO1R
5

TROS-M-1
TRO1R

T-1-A
PRV-1-A

FS-1-A
9

S: (24VDC) DOA-BWTS-02
C: (RTU) TR1A-BWTS-01
D TRO1 C: (RTU) TRO1A-BWTS-01
O: (230V) PA-BWTS-04 3
PAGE 2/4

01
S: (24VDC) PSA-BWTS-01

V3-02

Z1 Page 2/4
PAGE 2/4 7

LS
PAGE 3/4 B
MANUAL
SAMPLING PS-1-A

DAP1
PI VI
S

C PCM1 A PAGE 2/4

C-1-A
H2-1-A S:(4-20mA) H2A-BWTS-01
PAGE 2/4 10
T/R-1-A
CWS1-A C
V1-01
LS

A
E PAGE 2/4 1

O: (50VDC) EC1A-BWTS-01...04
S: (24VDC) DOA-BWTS-10
4
01

V3-01
LS
O: (440V)
PA-BWTS-03

CV01
GV01 01

PAGE 3/4

PIT-3-A
440 VAC
SEE DETAIL 1
PAGE 3/4
380 VAC

1
G

PA-BWTS-02
SMD-1-A PIT-1-A

O: (380V)
F-1-A

FROM BALLAST PUMPS

V1-02

B S:
S:
S:
S:
S:
(4-20mA)
(4-20mA)
(4-20mA)
(4-20mA)
(4-20mA)
PIA-BWTS-03
PIA-BWTS-01
SMDA-BWTS-01
AIA-BWTS-01
AOA-BWTS-01
2
DESCRIPTION
O: GENERAL INPUT AC1
CIRCUIT BREAKER
MSB
ENGINE CONTROL ROOM COMMENTS
B
S: (24VDC) DOA-BWTS-01
9
BILL OF 8 PAGE 2/4
NRV2

S: (24VDC) DIA-BWTS-01
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VPI PI

SWP1
VESSEL SHIPYARD
FROM D.B./side tanks 323/329
No.3 P&SB
V3 V6 V6-01

PROJECT DETAILS
01 THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE RELEASE DATE INFORMATION. SUCH INFORMATION SHALL
LINE SYMBOLS S: (4-20mA) AOA-BWTS-03
SPECIFIED (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
S: (4-20mA) AIA-BWTS-03
5
WITHOUT WRITTEN PERMISSION FROM
ELECTRICAL (SIGNAL & POWER SUPPLY) S: (24VDC) SWP-BWTS-01 ERMAFIRST. THIS DOCUMENT SHALL NOT
DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
AIR LINE
DIMENSIONS ARE IN MILLIMETERS DESCRIPTION
A FLEXIBLE HOSE

ERMA FIRST SCOPE OF SUPPLY

O: GENERAL INPUT AC3
CIRCUIT BREAKER
DIMENSIONS IN BRACKETS ARE CHECKED BY A
SYSTEM SPECIFIC COMPONENT O: (380V) SWP-BWTS-02
SEA WATER
PUMP
O:(380V) PA-BWTS-07
MSB
INCHES
ENGINE CONTROL ROOM
S: SIGNAL CABLE
O: POWER CABLE
STARTER PANEL
(SWPSP) SIZE DOCUMENT ID REV.
C: BUS COMMUNICATION CABLE
DIAGRAM IS IN ACCORDANCE APPROVED BY
WITH AMERICAN NATIONAL
STANDARD ANSI/ISA-5.1-2009 TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 17
1
 6 5 4 3 2 1
S: (24V) DOA-BWTS-15
S: DP-BWTS-03

D C: (RTU) TRO2A-BWTS-01
O: (230V) PA-BWTS-05 BALLAST PUMP 2
STARTER PANEL D
S: (24VDC) BP-BWTS-01
BALLAST PUMP 1
STARTER PANEL

S: (24VDC) ECRA-BWTS-01
C: (TCP/IP) ECRA-BWTS-02 ALARMS
C: (TCP/IP) ECRA-BWTS-03
ENGINE CONTROL ROOM
GPS C: (RTU) GPS-BWTS-01
INTEGRATION

O: GENERAL INPUT AC2

O: (100-230V) PA-BWTS-01
CIRCUIT BREAKER
MSB
CP1 ENGINE CONTROL ROOM

S: (24VDC) DOA-BWTS-14
O: GENERAL INPUT AC5
CIRCUIT BREAKER TRO2 21

O: (380V) MIX-BWTS-01 MSB

ENGINE CONTROL ROOM

C O:
O:
S:
S:
(24VDC) FLS-BWTS-01
(220V) PA-BWTS-10
DP-BWTS-01
DP-BWTS-02
MS1
O:(380V) PA-BWTS-09 C PAGE 2/6
MANUAL PAGE 1/4 D
C
SAMPLING

FRESH WATER M
SUPPLY NATS
FLS PI DAP2
S

VI PI PAGE 1/4 10

PAGE 1/4 6
F H TRIP UNIT A
NAT1 DP1 PAGE 1/4 7
A PCM2
PAGE 1/4

A
DRIP TRAY S: (24VDC) TRIPA-BWTS-01 O: (24VDC)
DRAIN 8 PAGE 1/4 CMA-BWTS-01
DTV

S: ECRA-BWTS-04
S: (24VDC) DOA-BWTS-11
Ο:GENERAL INPUT DC1
ENGINE CONTROL
CONSOLE

S
S

TROS-M-3
TROS-M-2

BIS-M-1

G2S-M
B FROM BALLAST PUMPS B
102-1 H2
TRIP ALARM

ENGINE CONTROL ROOM

S: (24VDC) DOA-BWTS-05
S: (24VDC) DOA-BWTS-08
S: (24VDC) DOA-BWTS-04
S: (24VDC) DOA-BWTS-06
S: (24VDC) DOA-BWTS-09
S: (24VDC) DOA-BWTS-07

Z1 Page 1/4

S: FCWP-BWTS-01

F
E H

S:FCWP-BWTS-02
PAGE 1/4

FROM BALLAST TANKS 01

O: GENERAL INPUT AC(6)
380V/4AMP 60Hz

A CIRCUIT BREAKER
MSB
O:(380V) PA-BWTS-11

DESCRIPTION A
S

DRIVING WATER ENGINE CONTROL ROOM

TROS-S-1

TROS-S-2

STRIPPING EDUCTOR
BIS-S-1

Fresh Cooling Water

Pump SIZE DOCUMENT ID REV.
Starter Panel

103-1 TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 18
1
 6 5 4 3 2 1
DETAIL 1

FILTREX FILTER

D VESSEL'S EXISTING VALVES MONITORING

VALVES SIGNAL
S:
S:
S:
S:
(4-20mA) FXA-BWTS-02
(24VDC) FXA-BWTS-03
(24VDC) FXA-BWTS-04
(24VDC) FXA-BWTS-01
11
D
S: (24VDC)DIA-BWTS-04

LS
106-1
POWER CABINET FX

S: (24VDC)DIA-BWTS-05

LS
106-2 O: (380V) PA-BWTS-08
FSP-1-A

O: (380V) FXA-BWTS-06
S: (24VDC)DIA-BWTS-06

LS
106-3

O: GENERAL INPUT AC4

S: (24VDC)DIA-BWTS-07 CIRCUIT BREAKER

LS
106-4 F-1-A
MSB
LS VPI PI ENGINE CONTROL ROOM
S: (24VDC)DIA-BWTS-08 SP-1-A

LS
106-5

V5-01-A V4 V5 SDNR1
S: (24VDC)DIA-BWTS-09

LS
106-6
O: (380V) FXA-BWTS-05
S: (24VDC)DIA-BWTS-10
109-3 LS

C C
C PAGE 2/4

B PAGE 1/4

BWTS
LS-2-A Run Signal C: FCWP-BWTS-01
To
FCWP CP1
TGDT 11
150L

LS-1-A
V1

DAP3
VPI PI

PAGE 1/4 G

B PCM3
NRV1 V2
B
A

S: (24VDC) LS-BWTS-02
S: (24VDC) LS-BWTS-01
S: (24VDC) DOA-BWTS-12

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 19
1
 6 5 4 3 2 1
MSB ENGINE CONTROL ROOM
It is vital for the BWTS to stop supplying T/Rs into the below four scenarios:
LOGIC OF TRANSFORMER RECTIFIER'S CIRCUIT BREAKER TRIP Trip T/R-1-A (AC1) 1. If Pressure Switch is not in its normal condition, then TRIP (cut off) T/Rs' circuit breaker.
In order to protect Ballast water treatment system (BWTS), it is needed to be able to cut off Transformer Rectifiers' (T/R) power. Sheet 1/4 2. If Ballast Water Treatment System (BWTS) run signal (BWTS_RUN) is activated and Temperature Switch is in "High
Alarm Condition" and it's appeared for 3 minutes continuously then TRIP (cut off) T/Rs' circuit breaker.
3. If Transformer Rectifiers' wrong operation signal is activated (TR_TRIP), then TRIP (cut off) T/Rs' circuit breaker.

D 4. If Ballast Water Treatment System (BWTS) run signal (BWTS_RUN) is activated and Hydrogen sensor detects 40% H2
D

S:TRIPA-BWTS-01
concentration then TRIP (cut off) T/Rs' circuit breaker.

2*0.75mm2
O:(24VDC) CMA-BWTS-01
24 VDC/ 4A Fuse
Engine Control Console
H2
S:(24VDC) DOA-BWTS-14 S:(24VDC) ECRA-BWTS-04 CRITICAL
CONTROL PANEL ALARM
TO AMS
(CP1) S:(24VDC) H2A-BWTS-02

HYDROGEN
C PRESSURE
SWITCH
S:(24VDC) PSA-BWTS-01
S:(24VDC) H2A-BWTS-01

SENSOR (H2-1-A) C
(PS1-1-A)

For H2-1-A
TEMPERATURE H2-1-A (N.C.)
S:(24V) TSA-BWTS-01
SWITCH
(TS1-1-A) ALARM SIGNAL TRIP UNIT A
TO VESSEL'S AMS

FOR PS-1-A
LOGIC DIAGRAMS PS-1-A (N.C.)

TRIP
FOR TS-1-A
B D
HYDROGEN SENSOR
(H2-1-A)
IN ALARM CONDITION
BWTS RUN
BALLASTING
SIGNAL
TS-1-A (N.C.) T1
180sec
(CUT OFF)
T/RS'
CIRCUIT
BREAKER
B
(N.C.)

CONTROL PANEL
Α PRESSURE SWITCH (PS-1-A) IN T/R wrong
ALARM CONDITION operation signal
>5BAR (N.C.)

TEMPERATURE TRIP
BWTS RUN TIMER RELAY (CUT OFF)
Β SWITCH (TS-1-A) IN T =180SEC T/RS'
BALLASTING "HIGH ALARM CONDITION"
SIGNAL >40°C CIRCUIT
BREAKER

A DESCRIPTION A
T/R WRONG
C OPERATION SIGNAL
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 20
 6 5 4 3 2 1
MAIN BWTS CONTROL PANEL 1
X20 SWITCH X6 ETHERNET X1 attention critical
SWITCH alarm alarm
T/R-1-A
L1 L2 COMM.
C NC C NC
D 3A 3B D

ETHERNET

ETHERNET
1 2 1 2 3 4

PORT

PORT
1 2

Voltage: 100-230V AC/50Hz

Amperage: 10 A
PA-BWTS-01
3*4.0mm2

1 2

1 2 3 4

Power source 440V FROM TRIP

1 2 3Φ, 40AMP 3*10mm2 UNIT

CAT5E S/FTP 4" MAX CABLE

CAT5E S/FTP 4" MAX CABLE

PA-BWTS-03 SHEET
50Hz Circuit 10/12

ECRA-BWTS-02

ECRA-BWTS-03
Breaker

4*2*0.75mm2
ECRA-BWTS-01
LENGTH 80m

LENGTH 80m
Power source 100-230V 1Φ,
16AMP/ 50Hz

TR1A-BWTS-01

2*2*0.75mm2
2*0.75mm2
to CP1 (AC2)

ECRA-BWTS-04
MSB ENGINE
CONTROL ROOM

C 440 VAC
C
380 VAC
L1 L2 L3 1 2 3 4 1 2 3
MSB ENGINE
CONTROL ROOM SERIAL COM X2
3*10mm 2 RS485 1A 2
PA-BWTS-02 2B 1
1 2 3
3C LOOSE TO Remote Remote Remote
attention critical H2 critical
CABLE VESSEL'S
Power source 380V alarm alarm alarm
FOR LAN
3Φ, 32AMP TRANSFORMER RECTIFIER MAINTENANCE SWITCH
50Hz (AC1) PURPOSES
T/R- 1-A
24VDC SHT (AMS)
TRIP AC(1)
ENGINE ROOM

B B
TRIP-BWTS-01
2*0.75mm2

DESCRIPTION
ENGINE CONTROL ROOM COMMENTS
BILL OF
DRAWING STATUS PROJECT NR.
FROM TRIP
UNIT-A
(+) FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
(-)
[400A/ 50V max]
323/329
FOR ELECTROLYTIC CELL
PROJECT DETAILS
THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE RELEASE DATE INFORMATION. SUCH INFORMATION SHALL
SPECIFIED (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO ERMA FIRST
1*70mm2, EC1A-BWTS-01

1*70mm2, EC1A-BWTS-02

1*70mm2, EC1A-BWTS-03

1*70mm2, EC1A-BWTS-04

OTHERS OR USED FOR ANY PURPOSE THE ESSENTIAL BALLAST SOLUTION

WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS ARE IN MILLIMETERS DESCRIPTION
01
A DIMENSIONS IN BRACKETS ARE CHECKED BY A
INCHES
+ + - -
SIZE DOCUMENT ID REV.
Electrolytic cell C-1-A DIAGRAM IS IN ACCORDANCE APPROVED BY
WITH AMERICAN NATIONAL
STANDARD ANSI/ISA-5.1-2009 TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 21
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X16
Seawater Seawater Seawater X16 X5
Pump 1 Pump 1 Pump 1 V6_01 V6_01 BP No.1 BP No.2
operation alarm Run signal operation feedback run signal run signal
4-20mA 4-20mA
D 1 2 3 4 9 10
5 6 7 8
1 2 3 4 D

1 2 3 4 5 6 1 2 1 2

BP-BWTS-01

BP-BWTS-02
2*2*0.75mm2

2*2*0.75mm2
AOA-BWTS-03

AIA-BWTS-03
2*2*0.75mm2

2*2*0.75mm2
4*2*0.75mm2
SWP-BWTS-01

C C
SWPSP1 1 2 3 4 5 6
Voltage: 380V AC/50Hz
Amperage:16 A

1 2 1 2
X3 1 2 3 4 5 6 1 2 1 2

X1 X2 PE

L1 L2 L3 PE 1 2 3 4 6 7 61 62
V6_01 V6_01
operation feedback
4-20mA 4-20mA
PA-BWTS-07
3*2.5mm2

SWP-BWTS-02
3*2.5mm2

PUMP1 PUMP2
run signal run signal
(N.O. contact) (N.O. contact)

B BP1 BP2 B
STARTER STARTER
Power source 380V SWP1 PANEL PANEL
motor
3Φ, 16AMP,50Hz
from Mains(AC3)
MSB ENGINE
CONTROL ROOM

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 22
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X9 X19 X6 X19 X6
LEVEL LEVEL TRO1 TRO1
SWITCH SWITCH TRO2 TRO2
SUPPLY COMM. SUPPLY
LS-1-A LS-2-A COMM.

D 1 2 3 4 1 2 1A 1B 3 4 2A 2B D

1 2
1 2 1 2
1 2

1 2 1 2

PA-BWTS-04
3*1.5mm2

3*1.5mm2
PA-BWTS-05
TRO1A-BWTS-01
2*0.75mm2

TRO2A-BWTS-01
2*0.75mm2
C C
LS-BWTS-01
2*0.75 mm2

2*0.75 mm2
LS-BWTS-02

2 1 2 1
1 2

A B A B
L N L N
1 2 1 2 1 2 RS485 Terminal Block 1 2 RS485 Terminal Block
TRO1A-BWTS-02
3*1.5mm2

TRO2A-BWTS-02
3*1.5mm2
1 2 1 2
LEVEL LEVEL
SWITCH SWITCH
LS-1-A LS-2-A

B (N.C.
Contact)
(N.O.
Contact)
1 2
1 2
B
FAN SUPPLY FAN SUPPLY
L N L N Chlorine Sensor - TRO2
Chlorine sensor-TRO1

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 23
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X12 X10 X10
V1_02 V1_02 V1_03 V1_03
V1-01 V1_01 V1_01 operation feedback operation feedback SPARE V3_01 V3_02 FM-1-A FM-1-A
operation Open pos. Close pos. 4-20mA 4-20mA 4-20mA 4-20mA Close pos. Close pos. SUPPLY 4-20mA

D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 D

1 2 1 2 3 4 1 2 1 2 1 2 1 2
1 2

DIA-BWTS-03
DIA-BWTS-02
DOA-BWTS-01

DIA-BWTS-01

2*2*0.75mm2
AOA-BWTS-01

AIA-BWTS-01

AOA-BWTS-02

AIA-BWTS-02
2*2*0.75mm2

2*2*0.75mm2

2*2*0.75mm2

2*2*0.75mm2
2*2*0.75mm2

2*2*0.75mm2
2*0.75mm2

PA-BWTS-06

FMA-BWTS-01
3*1.5mm2

2*0.75mm2
C C
1 2 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2

1 2 5 6 2 3 6 7 61 62 6 7 61 62 5 6 2 3 1 2
V1_02 V1_02 V1_03 V1_03 V3_01
V1-01 V1_01 V1_01 operation feedback operation feedback V3_02
operation Close pos.
Open pos. Close pos. 4-20mA 4-20mA 4-20mA 4-20mA Close pos.
(N.O. (N.O. (N.O. (N.O.
Contact) Contact) Contact) Contact) 1 2 31 32
+24V DC- +4-20mA -
Flow meter (FM-1-A)
B B

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 24
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X2
CWS-1-A TROS-M-1 TROS-M-2 TROS-M-3 TROS-S-1 TROS-S-2 SPARE SPARE BIS-M-1 BIS-S-1 SPARE PCM1 PCM2 PCM3 SPARE PRV-1-A
D 1 2 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 D

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

DOA-BWTS-03

DOA-BWTS-10
DOA-BWTS-02

DOA-BWTS-13
DOA-BWTS-11

DOA-BWTS-12
DOA-BWTS-06

DOA-BWTS-07

2*0.75mm2
DOA-BWTS-04

2*0.75mm2

2*0.75mm2
DOA-BWTS-05

DOA-BWTS-09
DOA-BWTS-08
2*0.75mm2

2*0.75mm2

2*0.75mm2
2*0.75mm2
2*0.75mm2

2*0.75mm2

2*0.75mm2

2*0.75mm2

2*0.75mm2
C C
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
CWS-1-A TROS-M-1 TROS-M-2 TROS-M-3 BIS-M-1 BIS-S-1 PCM1 PCM2 PCM3
TROS-S-1 TROS-S-2 PRV-1-A

B B

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 25
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X11

PIT-1-A PIT-2-A PIT-3-A T-1-A FS-1-A

D 1 2 3 4 5 6 7 8 13 14 15 D

Brown

White

Blue
1 2 1 2 1 2 1 2

PIA-BWTS-02

2*0.75mm2

2*0.75mm2
2*0.75mm2

2*0.75mm2

PIA-BWTS-03
PIA-BWTS-01

TA-BWTS-01

IFM-EVC006 PUR 4*0.34 mm2

FSA-BWTS-01
C C

1 2 1 2 1 2 1 2

B 1
PRESSURE
2 1
PRESSURE
2 1
PRESSURE
2 1
TEMPERATURE
2
FLOW SWITCH 1 -A
B
SENSOR SENSOR SENSOR
SENSOR (T-1-A) (FS-1-A)
(PIT-1-A) (PIT-2-A) (PIT-3-A)

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 26
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X11
SMD-1-A X14
D 25 26
VESSEL'S

1
GPS
2
D

1 2
1 2

SMDA-BWTS-01
2*0.75mm2

GPS-BWTS-01
2*0.75mm2
C 1 2
C
(+) (-)
4-20mA 1 2
monitor
GPS
FLXA21-D-P INTEGRATION

11 12 14 13 17 15 16

BLUE
RED

YELLOW

BROWN

WHITE
SMDA-BWTS-02
B B

8*0.5mm²
Salinity Sensor ISC40
SMD-1-A

A NOTE: ALL CABLES MUST BE MARINE TYPE

WITH INSULATED PROTECTION(ARMORED AND SHEATHED)
DESCRIPTION A
ERMA FIRST SUPPLY
SHIPYARD SUPPLY SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 27
 6 5 4 3 2 1
X17 BWTS CONTROL PANEL 1

SPARE X18 X18

SPARE

SPARE

SPARE

SPARE

SPARE

SPARE

SPARE

SPARE

SPARE

SPARE

SPARE
F-1-A SP-1-A SP-1-A SP-1-A V5-01-A V5-01-A

PE
F-1-A

0V
FLUSH. VALVE
D 1 2 3 4 5 6 7 8 9
V5-01-A
10 11 12 13 14 15 16 17 18
operation overload
33 34 35 36 37 38 39 40
operation overload Run signal

1
DPT-1-A

2
Open pos.

3 4
Close pos.

5 6
D

1 2
1 2 1 2 3 4

1 2 3 4 5 6 7 8 9 10

7*2*0.75mm2
FXA-BWTS-01
FXA-BWTS-04
2*0.75mm2

2*2*0.75mm2
2*2*0.75mm2

FXA-BWTS-03
FXA-BWTS-02
C C
1 2
1 2 3 4

1 2

1 2 + 4-20mA - 5 6 2 3
Differential Pressure
V5-01-A 1 2 3 4 5 6 7 8 9 10 POWER CABINET A Transmitter V5-01-A V5-01-A
(FSP-1-A) Open pos. Close pos.
Operation DPT-1-A
Voltage: 380V AC/50Hz (N.O. (N.O.
Amperage: 16 A
X3 1 2 3 4 5 6 7 8 9 10 Contact) Contact)

X1 X2 PE PE

4 8
B L1 L2 L3 PE 1 2 3 5 6 7
B
PA-BWTS-08
3*2.5mm2

FXA-BWTS-06
FXA-BWTS-05

3*2.5mm2
3*1.5mm2

F-1-A SP-1-A
Power source 380V
motor motor
3Φ, 16AMP,50Hz
from Mains(AC4)
MSB ENGINE
CONTROL ROOM

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 28
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
X7 X7 X7 X7
DP1 MIXER 1 X7 NAT1
X7 NAT1 NAT1 X3
FAULT AUTO MIXER 1
OUT DP1 FILLING LOW HIGH/HIGH
SIGNAL OPERATION ALARM NAT1
OPERAT. LEVEL LEVEL

D 1 2 3 5 6 7 8 9 10 31 32 23 24 25 26
VALVE

1 2 D

POWER SOURCE
3 1 2
380V 3Φ, 1 2
5 6 7 8 9 10 11 12 13 14 15 16
4AMP,50Hz (AC5)

9*2*0.75mm2
DP-BWTS-03
MSB ENGINE
CONTROL ROOM

PA-BWTS-09
3*2.5mm2
C C

DOA-BWTS-15
2*0.75mm2
VOLTAGE: 380V AC/50hz
3 1 2 4 5 6
AMPERAGE: 4 A 7 8 9 10 11 12 13 14 15 16
X1
X1 17 18 19 20 21 22 23 24 25 26
5 6 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 U V W 1 2 3
X2 3(BL) 2(WH) 1(BR) 4(BLK) 1(BR)
BU BU RD WH RD/BU WH/BU

MOTOR STARTER (MS1)

1 2

SILICONE CABLE (2m)

PUR 4*0.34 mm2
PUR 4*0.34 mm2

FLS-BWTS-01
IFM-EVC006
IFM-EVC006

DP-BWTS-02
DP-BWTS-01
PA-BWTS-10
3*1.5mm2

1 2

MIX-BWTS-01
3*1.5mm2
NAT1
VALVE

B 1 2 B
1 MIXER
2 1 2 motor
L N
4 3 4 3 BU BU RD WH RD/BU WH/BU

DOSING PUMP 1
LOW HIGH/ HIGH
LEVEL HIGH LEVEL
LEVEL
SPC SPA SPB
NO NO NC

1 2 1 Brown 3 Blue
4 3 LEVEL SENSOR (FLS1)

2 White 4
A Black
DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 29
1
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
BWTS CONTROL PANEL 1
ON SYSTEM (PIPING) X11 H2-1-A
T/R 22 23 24
TEMPERATURE PRESSURE

D X4 WRONG BWTS RUN

OPERATION BALLASTING
SIGNAL SIGNAL 1
SWITCH
(TS-1-A)
SWITCH
(PS-1-A)
D
1 2

1 2 3 4 C NC C NC

1 2 1 2
1 2 3 4
2*0.75mm2
H2A-BWTS-02

H2
Ο: GENERAL INPUT DC(1), CRITICAL
24 VDC/ 4A Fuse ALARM
Engine Control Console TO AMS

C X1.2 TRIP AMPLIFIER 1.1

1(+) - T
C

2*2*0.75mm2
2(-) + X

ECRA-BWTS-04
X1.1 C D
2*2*0.75mm2

PSA-BWTS-01
2*0.75mm2
2*0.75mm2
TSA-BWTS-01
DOA-BWTS-14
CMA-BWTS-01
3*2.5mm2

1 2

X1.2 HYDROGEN
TO TRIP
14+ 8+ 7- SENSOR (H2_A)
(AC1)
Splitter 4-20mA
15- - S1 +
2- 3 11+ 10-
X1.1 2 1 1 2 3

1 1 3

TRIPA-BWTS-01
2 2 4

2*0.75mm2
X1 X3 1 2 3 X2 1 2 1 2 1 2
24V
B 1 2 B
1 2 3 4 5 6 1 2 3 1 2 3 4 5 6 7 8 9 10 11
C NC NO
(-) (+)
TEMPERATURE

HYDROGEN
OPERATION

BALLASTING

PRESSURE

TRIP (AC1,
AC2, AC3)
BWTS RUN

1 2 3
SIGNAL 1

SWITCH

H2-1-A
(PS-1-A)
WRONG

2*2*0.75mm2
SIGNAL

SENSOR
TRIP UNIT

SWITCH
(TS-1-A)

(H2-1-A)
SUPPLY

ALARM
T/R

H2-1-A H2A-BWTS-01
HYDROGEN
SENSOR
TRIP UNIT-A

A NOTE: ALL CABLES MUST BE MARINE TYPE

DESCRIPTION A
WITH INSULATED PROTECTION(ARMORED AND SHEATHED)
ERMA FIRST SUPPLY SIZE DOCUMENT ID REV.
SHIPYARD SUPPLY
TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 30
 6 5 4 3 2 1
BWTS CONTROL PANEL 1
Fresh Fresh
X15 106-6 109-3 X13 Cooling Cooling

D Close pos.
V1
106-1
Close pos.
V2
106-2 106-3
Close pos.
V3
106-4
Close pos.
V4
106-5
Close pos.
V5
Close pos.
V6
Close pos.
V7
Water
Pump
Operation
Water
Pump
Alarm
D
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 2 3 4

1 2 3 4
1 2 1 2 1 2 1 2 1 2 1 2 1 2

POWER SOURCE
380V 3Φ,
4AMP,60Hz (AC6)
MSB ENGINE
CONTROL ROOM

C C

FCWP-BWTS-01
4*2*0.75mm2
2*2*0.75mm2

2*2*0.75mm2
2*2*0.75mm2

2*2*0.75mm2
2*2*0.75mm2
2*2*0.75mm2
2*2*0.75mm2

DIA-BWTS-09

DIA-BWTS-10
DIA-BWTS-04

DIA-BWTS-07
DIA-BWTS-06

DIA-BWTS-08
DIA-BWTS-05

3*2.5mm2
PA-BWTS-11
01

1 2 3 4 X1

1 2 3 4 U1 V1 W1 1 2 3

Fresh Cooling Water Pump Starter Panel Voltage: 380V AC/60Hz

(FCWPSP)
1 2 1 2 1 2 1 2 1 2 1 2 1 2

FCWP-BWTS-02
C NO C NO C NO C NO C NO C NO C NO

3*2.5mm2
B 106-1
Close pos.
106-2
Close pos.
106-3
Close pos.
106-4
Close pos.
106-5
Close pos.
106-6
Close pos.
109-3
Close pos.
B
Fresh
Cooling
water pump
(FCWP)

A DESCRIPTION A
SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 31
1
 6 5 4 3 2 1
42 DIA-BWTS-09 2*2*0.75mm2
SHIPYARD SUPPLY
43 DIA-BWTS-10 2*2*0.75mm2
NO TAG TYPE ERMA FIRST SUPPLY
44 AOA-BWTS-01 2*2*0.75mm2
NO TAG TYPE
1 PA-BWTS-01 3*4.0mm2
45 AOA-BWTS-02 2*2*0.75mm2 1 DP-BWTS-01 (2m) 4*0.34 mm2
3*10mm2
D 2
3
PA-BWTS-02
PA-BWTS-03 3*10mm 2
46
47
AOA-BWTS-03
AIA-BWTS-01
2*2*0.75mm2
2*2*0.75mm2
2
3
DP-BWTS-02 (2m)
FSA-BWTS-01 (10m)
4*0.34 mm2
4*0.34 mm2
2
D
4 PA-BWTS-10 (2m) 3*1.5mm
4 PA-BWTS-04 3*1.5mm2
48 AIA-BWTS-02 2*2*0.75mm2 5 SMDA-BWTS-02 (2.5m) 8*0.5mm2
5 PA-BWTS-05 3*1.5mm2 2 SILICONE CABLE
49 AIA-BWTS-03 2*2*0.75mm 6 FLS-BWTS-01
(2m)
6 PA-BWTS-06 3*1.5mm2 2
50 DOA-BWTS-01 2*0.75mm
7 PA-BWTS-07 3*2.5mm2
51 DOA-BWTS-02 2*0.75mm2
2
8 PA-BWTS-08 3*2.5mm
52 DOA-BWTS-03 2*0.75mm2
2
9 PA-BWTS-09 3*2.5mm
53 DOA-BWTS-04 2*0.75mm2
2
10 PA-BWTS-11 3*2.5mm
54 DOA-BWTS-05 2*0.75mm2
2
11 TR1A-BWTS-01 2*0.75mm 55 DOA-BWTS-06 2*0.75mm2
12 FXA-BWTS-01 7*2*0.75mm2 56 DOA-BWTS-07 2*0.75mm2
13 FXA-BWTS-02 2*2*0.75mm2 57 DOA-BWTS-08 2*0.75mm2
14 FXA-BWTS-03 2*2*0.75mm2 58 DOA-BWTS-09 2*0.75mm2
C 15 FXA-BWTS-04 2*0.75mm2 59 DOA-BWTS-10 2*0.75mm2 C
16 FXA-BWTS-05 3*1.5mm2 60 DOA-BWTS-11 2*0.75mm2
17 FXA-BWTS-06 3*2.5mm2 61 DOA-BWTS-12 2*0.75mm2
18 EC1A-BWTS-01 1*70mm2 62 DOA-BWTS-13 2*0.75mm2
19 EC1A-BWTS-02 1*70mm2 63 DOA-BWTS-14 2*2*0.75mm2
2
20 EC1A-BWTS-03 1*70mm 64 DOA-BWTS-15 2*0.75mm2
21 EC1A-BWTS-04 1*70mm2 65 BP-BWTS-01 2*2*0.75mm2 01
22 FMA-BWTS-01 2*0.75mm2 66 BP-BWTS-02 2*2*0.75mm2
23 ECRA-BWTS-01 4*2*0.75mm2 67 DP-BWTS-03 9*2*0.75mm2
24 ECRA-BWTS-02 CAT5E 4"S/ FTP 68 MIX-BWTS-01 3*1.5mm2

25 ECRA-BWTS-03 CAT5E 4"S/ FTP 69 PIA-BWTS-01 2*0.75mm2 Power

Power
70 PIA-BWTS-02 2*0.75mm2 Consumption
26 ECRA-BWTS-04 2*2*0.75mm2 Consumption
B 27 TRO1A-BWTS-01 2*0.75mm 2
71
72
PIA-BWTS-03
TA-BWTS-01
2*0.75mm2
2*0.75mm 2
Equipment
during
ballasting (kW)
during
de-ballasting
B
28 TRO1A-BWTS-02 3*1.5mm2 (kW)
73 LS-BWTS-01 2*0.75mm2
2
29 TRO2A-BWTS-01 2*0.75mm 74 LS-BWTS-02 2*0.75mm2 Control Panel (CP) 1,00 1,00
30 TRO2A-BWTS-02 3*1.5mm2 75 TSA-BWTS-01 2*0.75mm2
Filter Starter Panel (FSP) 4,25 --
31 SMDA-BWTS-01 2*0.75mm2 76 PSA-BWTS-01 2*0.75mm2
32 SWP-BWTS-01 4*2*0.75mm2 77 H2A-BWTS-01 2*2*0.75mm2 Motor Starter (MS1) -- 0,14
2
33 SWP-BWTS-02 3*2.5mm
78 H2A-BWTS-02 2*0.75mm2
34 DIA-BWTS-01 2*2*0.75mm2 SeaWater Pump Starter
4,00 --
2 79 CMA-BWTS-01 3*2.5mm2 Panel (SWPSP)
35 DIA-BWTS-02 2*2*0.75mm
36 DIA-BWTS-03 2*2*0.75mm2 80 TRIPA-BWTS-01 2*0.75mm2 T/R1 14,87 --
37 DIA-BWTS-04 2*2*0.75mm2 81 GPS-BWTS-01 2*0.75mm2 TOTAL RATED POWER
24,12 1,14
38 DIA-BWTS-05 2*2*0.75mm 2 (kW)
82 FCWP-BWTS-01 4*2*0.75mm2
A 39
40
DIA-BWTS-06
DIA-BWTS-07
2*2*0.75mm2
2*2*0.75mm 2
83 FCWP-BWTS-02 3*2.5mm2
DESCRIPTION A
41 DIA-BWTS-08 2*2*0.75mm2 SIZE DOCUMENT ID REV.

TAG: SCALE:

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 32
603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

Equipment drawings

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 33
603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

FILTER ACB-910 DN150 PN10 400/440 101-1002-002

FILTER PANEL 0,63-1A - 6-10A 440V/60Hz 101-8002-001

CENTRIFUGAL PUMP 30M3/H 20M 380V/ 50Hz 101-7001-080

ELECTROLYTIC CELL ECF100 101-3000-001

TRANSFORMER RECTIFIER 2M PN10 ANGLED 102-4001-017

EXPANSION RUBBER SPOOL DN20 PN10 370MM 102-4001-029

STANDARD CONTROL PANEL 220V 800x1000 / STANDARD CONTROL PANE 102-8001-027

CHLORINE SENSOR MODULE 0-10 PPM ISO PN10 / CHLORINE SENSOR M 102-5001-001

FLOW METER DN100 PN10 24V 101-5002-002

DOSING PUMP 30LT/H 40M 101-7003-001

BUTTERFLY DN150 PN10 SOLENOID LS 24V MAR 101-6003-327

BUTTERFLY DN150 PN10 POSITIONER MAR 101-6003-326
BUTTERFLY DN100 PN10 POSITIONER MAR 101-6003-280
BUTTERFLY DN150 PN10 GEARBOX LS MAR 101-6003-358
BUTTERFLY DN65 PN10 SOLENOID LS 24V MAR 101-6003-324
BUTTERFLY DN50 PN10 POSITIONER MAR 101-6003-353
GLOBE VALVE DN20 PN10 BRASS PNEUMATIC 24V 103-6001-003
GLOBE VALVE DN25 PN10 BRASS PNEUMATIC 24V 103-6001-005
FLOW SWITCH DIGITAL 24V 101-5003-001

PRESSURE SENSOR MODULE 0-10bar / PRESURE SENSOR MODULE 0-10b 102-5004-001

PRESSURE INDICATOR MODULE 0 TO 10 BAR / PRESSURE INDICATOR M 102-5004-007

TEMPERATURE SENSOR MODULE 0-100C / TEMPERATURE SENSOR MODULE 102-5005-001

SALINITY MEASURING MODULE 0-40PSU / SALINITY MEASURING MODUL 102-5006-001

PNEUMATIC DIAPHRAGM PUMP PN10 / PNEUMATIC DIAPHRAGM PUMP 102-7002-001

PNEUMATIC DIAPHRAGM PUMP CONTROL MODULE / PNEUMATIC DIAPHRAG 102-7002-002

FIXED HYDROGEN SENSOR 0-100% LEL 101-5007-006

CP SELF PRIMING 14M3 H 35M 380V 50Hz 101-7001-137

PUMP STARTER PANEL 440V 6-10A 101-8003-009

TEMPERATURE SWITCH MODULE 20-60C / TEMPERATURE SWITCH MODULE 102-5005-002

PRESSURE SWITCH MODULE 1-10bar / PRESSURE SWITCH MODULE 1-10 102-5004-003

FLOAT LEVEL SWITCH MODULE / FLOAT LEVEL SWITCH MODULE 102-5008-001

TRIP UNIT 24V DNV-GL METALLIC STANDARD / TRIP UNIT 24V DNV-G 102-8005-016
VACUUM PRESSURE INDICATOR MODULE -1 TO 5 BAR / VACUUM PRESSU 102-5004-008
MOTOR STARTER 440V 101-8003-017

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 34
 6 5 4 3 2 1
NOTE: REVISION HISTORY
1.FLOW RATE: 135 M3/H MAX. REV DESCRIPTION REVISED BY DATE APPROVED BY
2.WORKING PRESSURE : 0.5 BAR TO 10 BAR 1 NOTE 15 HAS BEEN ADDED P.STAIKOU 14/5/2020 A.GKINOSATIS
3.WORKING AMBIENT TEMP: 0 C TO +55 C
4.STORAGE AMBIENT TEMP.: -20 C TO +55 C
D 5.VOLUME 25 LITRES
6.WEIGHT 131 KG
D
7.ENCLOSURE: GEAR MOTOR IP55
8.GEAR MOTOR POWER CONS.: 0.25 kW ELECTRIC GEAR MOTOR
9.CONNECTION STANDARD ISO PN10 CABLE CONNECTION PG16
10.BASE PLATE & FLUSHING FLANGE CAN BE ROTATED ON SITE 90
11.DRAIN PLUG [1/2] EXISTING ON FILTER BODY 90
12.HOUSING MATERIALS: ASTM B148 C95800 VENT PLUG [1/2"] GAS 1
13.MATERIALS FOR FILTER ELEMENTS: ASTM B148 C95800 & AISI 316L SEE NOTE 15 VENT PLUG [1/2''] GAS
14.MATERIAL ON INTERNAL PARTS: ASTM B148 C95800 & AISI 316L DO NOT REMOVE PLUG
15..BALL VALVE V9-09 TO BE USED FOR AIR VENT(REMOVE PLUG & INSTALL VALVE)
AND BALL VALVE V9-10 TO BE USED FOR DRAIN (REMOVE PLUG & INSTALL VALVE) 1
BOTH VALVES INCLUDING COUPLINGS ARE ERMAFIRST SCOPE OF SUPPLY. FILTER OUTLET

C DIFFERENTIAL PRESSURE INSTRUMENT

CABLE CONNECTION PG7 C
INSTRUMENT ROOT VALVE FILTER INLET
FILTER FLUSHING CONNECTION

1
DRAIN PLUG [1/2] GAS
SEE NOTE 15

EARTH CONNECTION ISO-M8

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
11/6/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FILTER ACB-910 DN150 PN10 400/440 A
FIRST ANGLE PROJECTION N.VASILAKOPOULOS
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-1002-002 1
A. GKINOSATIS TAG: SCALE: 1:7 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 35
 6 5 4 3 2 1
314
SERVICE CLEARANCE ( 285)
8X 22
D 388 ( 240) D
A

REQUESTED
INSTALLATION
939 600 951 370
HEIGHT>=1168 DETAIL A
780 827 780 SCALE 1:5
INLET & OUTLET FLANGES
ISO PN10 DN150
C 523
423
B 489
C C
C
(CW)
280
212 15
112 ( 145)
( 185)
115
159 256 115
200 4X ( 18)

230 249 200

DETAIL B
190
B DESCRIPTION
SCALE 1:5 COMMENTS B
FLUSHING FLANGE
256 BILL OF ISO PN10 DN65
230190
4X 20 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
53 EARTH CONNECTION M8 VESSEL SHIPYARD
159 323/329
SECTION C-C PROJECT DETAILS
SCALE 1:10 28
(CW)
UNLESS OTHERWISE SPECIFIED RELEASE DATE
(DY-MO-YEAR)
THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
11/6/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FILTER ACB-910 DN150 PN10 400/440 A
FIRST ANGLE PROJECTION N.VASILAKOPOULOS
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-1002-002 1
A. GKINOSATIS TAG: SCALE: 1:10 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 36
 6 5 4 3 2 1
NOTE: 25 4X 9
1.
2.
POWER 440V AC
IP54 CLASS
DETAIL A 19.5 VIEW B-B
3. COLOR RAL6034 SCALE 1 / 2 SCALE 1 / 5
D 4. WEIGHT: 17KG
D
WALL
B B
400
350 202
A

C 439 400 475

C

400

DOOR OPEN
102 R400
42

53
B 240 125 DESCRIPTION COMMENTS
B
263
BILL OF
PN DESCRIPTION DRAWING STATUS PROJECT NR.
101-8002-001 FILTER PANEL 0,63-1A - 6-10A 440V/60Hz FOR APPROVAL 002-003247/002-003248
101-8002-002 FILTER PANEL 1-1,6A - 13-18A 440V/60Hz VESSEL SHIPYARD
323/329
101-8002-003 FILTER PANEL 1-1,6A - 17-23A 440V/60Hz
PROJECT DETAILS
101-8002-004 FILTER PANEL 1-1,6A - 9-14A 440V/60Hz THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED RELEASE DATE INFORMATION. SUCH INFORMATION SHALL
102-8002-001 FILTER PANEL 0,63-1A - 4-6,3A 440V/60Hz (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION

102-8002-002 FILTER PANEL 1-1,6A - 6-10A 440V/60Hz 10/7/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
102-8002-003 FILTER PANEL 24-32A 440V/60Hz DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K E.GKOUNTI
A 102-8002-004 FILTER PANEL 0,63-1A - 6-10A 440V/60Hz DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FILTER STARTER PANEL 440V A
102-8002-005 FILTER PANEL 1-1,6A - 13-18A 440V/60Hz FIRST ANGLE PROJECTION TH.KARASTERGIOS
SIZE DOCUMENT ID REV.
102-8002-006 FILTER PANEL 1-1,6A - 17-23A 440V/60Hz APPROVED BY A3 8002-1000-16
102-8002-007 FILTER PANEL 1-1,6A - 9-14A 440V/60Hz A.GKINOSATIS TAG: PSP SCALE: 1 / 5 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 37
 6 5 4 3 2 1
578
117 116
80 349
100 MAINTENANCE SPACE
D 4X ( 18)
D
( 125)
( 165)
SEE NOTE 5 342 322

A A
21 162
2X R

14
100 18
187 210 25 25
C 100 100 C
DETAIL B 340

4X ( 18) SCALE
NOTE:
1 / 2
( 100)
1. CONNECTION STANDART INLET ISO PN10 DN50 - OUTLET ISO PN10 DN32
250 2. ALL GASKETS TO BE NON-ASBESTOS TYPE
3. PUMP TECHNICAL SPECIFICATIONS:
( 140) FLOW CAPACITY: 30M3/H
PUMP TOTAL HEAD CAPACITY: 20M
4. MOTOR TECHNICAL SPECIFICATIONS:
POWER: 4kW
VOLTAGE: 380V-III
FREQUENCY: 50Hz
RPM: 2900
B 70
IP DEGREE: IP55
RATED IN: 7.4 A DESCRIPTION COMMENTS
B
5. FULLY SECURE PUMP MOTOR MOUNTING PLATE BY BOLTING ALL AVAILABLE SLOTS
4X 12 6. CABLE CONNECTION WITH CABLE GLAND 1X M32X1.5( 13MIN- 18MAX)
BILL OF
DRAWING STATUS PROJECT NR.
80
FOR APPROVAL 002-003247/002-003248
74 VESSEL SHIPYARD
B 323/329
290 190 140 233
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
7/6/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.HRISTODULOPULOS
A 14
DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY CENTRIFUGAL PUMP 30M3/H 20M 380V-50Hz A
SECTION A-A FIRST ANGLE PROJECTION C.PAPADOPOULOS
SIZE DOCUMENT ID REV.
SCALE 1 / 5 APPROVED BY
A. GKINOSATIS
A3
TAG:
101-7001-080
SCALE: 1 / 5 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 38
 6 5 4 3 2 1
NOTES: REVISION HISTORY
1. THE FINAL ORIENTATION OF CONNECTION BOX CAN BE DETERMINED REV DESCRIPTION REVISED BY DATE APPROVED BY
DURING INSTALLATION. 2 REVISED ISOLATION VIEW A.PINTER 23/12/2020 A.GKNOSATIS
2. THE CONNECTION BOX CAN BE ROTATED TO EITHER 0 (AS SHOWN) OR 180 , CABLE GLAND AXIS MUST BE PERPENDICULAR TO WATER FLOW.
D 3. CABLE GLANDS & LUGS ARE INCLUDED IN THE "INSTALLATION KIT" (REFER TO SCOPE OF SUPPLY TABLE)
D
1970
984 984
(400) ( 395)
(50) 22.5
171 50 (50)
( 240)
( 285)
8X 22
223.5 273.5
C (400) B
A
212 C
203
203 203 129 DETAIL A
576 616
74 SCALE 1:10
FLOW DIRECTION 4X 25.5 37.5 82.5 INLET & OUTLET FLANGES
ISO PN10 DN150
OUTLET 123 BOLTS TIGHTENING TORQUE

140 BOLT USED FOR TORQUE Nm

MAINTENACE
SPACE CONNECTION HOUSING 27
203
ELECTRICAL CONNECTIONS 53
B 2
DETAIL B CONNECTION FLANGES
DESCRIPTION 60
COMMENTS
B
CONNECTION BOXES SCALE 1:10 BILL OF MIDDLE FLANGE 135
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
INLET VESSEL SHIPYARD
323/329
PROJECT DETAILS
DESIGN DATA THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED RELEASE DATE INFORMATION. SUCH INFORMATION SHALL
PARAMETER VALUE (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION

WEIGHT (EMPTY) 105 kg 10/6/2019 WITHOUT WRITTEN PERMISSION FROM

ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESIGN PRESSURE 6 Bar DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A VIBRATION LIMIT
2-13.3Hz/1mm amplitude DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY ELECTROLYTIC CELL ECF100 A
13.2-80Hz/0.7g amplitude FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
CONNECTION FLANGE TYPE ISO PN 10 APPROVED BY A3 101-3000-001 2
GASKETS NON ASBESTOS A. GKINOSATIS TAG: C SCALE: 1 / 10 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 39
 6 5 4 3 2 1
NOTE:
1. CABLE LENGHT FROM T/R TO ELECTROLYTIC CELL SHOULD BE LESS THAN 40M
2. CONNECTION STANDARD ISO PN10
3. ALL GASKETS TO BE NON-ASBESTOS TYPE
4. ITEM 7. IS INDICATED IN THE MAIN "SCOPE OF SUPPLY (BOM)" TABLE, THE REFERENCE IN THIS DRAWING IS FOR FOR ASSEMBLY REASON.
D D
5 6
4
2
3
B

DETAIL A DETAIL B
C SCALE 1 / 5 WITHOUT TOUCH PROTECTION SCALE 1:5 C
DETAIL K
SCALE 1 / 2
7 2 102-4001-029 EXPANSION RUBBER SPOOL DN20 PN10 370MM
K 6 4 101-9002-045 POLYAMIDE GLAND NUT M20x1.5
5 1 101-9002-011 POLYAMIDE GLAND NUT PG36
1 4 1 101-9002-008 POLYAMIDE CABLE GLAND PG36-24/32-48.8
A TOUCH PROTECTION 3 4 101-9002-030 POLYAMIDE CABLE GLAND M20
2 4 101-9002-044 CABLE LUG COPPER CORE 70 - M10
1 1 101-4001-054 TRANSFORMER RECTIFIER 2 MODULES ANGLED
B 7
ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
7 DRAWING STATUS PROJECT NR.
INLET (CONNECTION FOR APPROVAL 002-003247/002-003248
WITH CWS ISO PN10)
VESSEL SHIPYARD
OUTLET 323/329
(CONNECTION ISO PN10)
T/R REQUIREMENTS PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
PARAMETER VALUE UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
WEIGHT 123KG 26/11/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
PROTECTION DEGREE IP44 DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K P.STAIKOU
A WATER PRESSURE 2-5BAR DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRANSFORMER RECTIFIER 2M PN10 ANGLED A
WATER TEMPERATURE 20-42deg. FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
WATER FLOW 0.5 m3/h APPROVED BY A3 102-4001-017
PRESSURE DROP 2 BAR A. GKINOSATIS TAG: T/R SCALE: 1:10 SHEET 1/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 40
 6 5 4 3 2 1
141 139
84 82

D 43 47 D
703 E
DC-BAR(-) LOAD 597
CONNECTION 548 99 329
(74) 294 505
25 (455) 25 524
C
2X 25
4X ( 14) DETAIL D 2X R
44
( 75) SCALE 1:10
F F 670
D 2X 604 ( 105)
462 479 392 4X 20 22
8
C DETAIL E C
351 SCALE 1:5 DETAIL G
DC-BAR(-) LOAD
SCALE
186
1:5
CONNECTION 144 141
109 EARTH CONNECTION M8 75
74
39 30
40
25 4X M8

(550)
25 500 25 12.5
361 380
B 145 110
G DETAIL C DESCRIPTION
DETAILCOMMENTS
H B
SCALE 1:5 BILL OF SCALE 1:5
H DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
704 (524) 304 414 323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
26/11/2020 WITHOUT WRITTEN PERMISSION FROM
(16) 217 ALL DIMENSIONS ARE IN MILLIMETERS ERMAFIRST. THIS DOCUMENT SHALL NOT
BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
110 GENERAL TOLERANCES PER ISO2768-m-K
DESCRIPTION
P.STAIKOU
A 503
524
SECTION F-F DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRANSFORMER RECTIFIER 2M PN10 ANGLED A
SCALE 1:10 FIRST ANGLE PROJECTION A.PINTER
APPROVED BY
SIZE DOCUMENT ID REV.
A3 102-4001-017
A. GKINOSATIS TAG: T/R SCALE: 1:15 SHEET 2/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 41
 6 5 4 3 2 1

D D

700
700

C C
MAINTENANCE FOR SERVICE ACCESS MAINTENANCE FOR SERVICE ACCESS
AND LOAD CONNECTIONS

600 600

B 600 DESCRIPTION COMMENTS

B
600
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
26/11/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K P.STAIKOU
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRANSFORMER RECTIFIER 2M PN10 ANGLED A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-4001-017
A. GKINOSATIS TAG: T/R SCALE: 1:15 SHEET 3/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 42
 6 5 4 3 2 1
NOTE:
1. CONNECTION STANDARD ISO PN10 DN20
2. ALL GASKETS TO BE NON-ASBESTOS TYPE

D D
2

3
C C

3 1 102-2003-004 FLANGED NECK DN20 PN10

2 1 ASME B36.10M PIPE [3/4''] - SCH80 - 135mm
1 1 101-4001-091 EXPANSION RUBBER JOINT BSP 3/4 FF
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
22/10/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.TZORTZINI
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY EXPANSION RUBBER SPOOL DN20 PN10 370MM A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-4001-029
T.KARASTERGIOS TAG: SCALE: 1 / 2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 43
 6 5 4 3 2 1

D D

370 +- 5.00
.00
90
240
(16) 45

( 105)
C ( 75) C
[G 3/4-14 - A]

4X ( 14)
(196) 25

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
22/10/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.TZORTZINI
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY EXPANSION RUBBER SPOOL DN20 PN10 370MM A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-4001-029
T.KARASTERGIOS TAG: SCALE: 1 / 2 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 44
 6 5 4 3 2 1
REVISION HISTORY
REV DESCRIPTION REVISED BY DATE APPROVED BY
1 LABEL "START-STOP" UPDATED TO "BACK-ENTER". K.KOKOVES 11/08/2020 A.GKINOSATIS
886 VIEW E-E
D E DETAIL C E 300
800
742
4X 10.2
SCALE 1 / 10 D
WALL
DETAIL A

285

1000 1030
1102
DETAIL B
C C
800

DOOR OPEN
R800
EARTH NOTES:
CONNECTION
DETAIL D 104 29 1. POWER SUPPLY 220V 60Hz
143 240 35 176 9 2. MAIN SWITCH: 3X12A
30 3. CONTROL PANEL POWER INPUT:
2X1.5MM CABLE TYPE, EXTERNAL DIAMETER 10.6MM
4. CONTROL SIGNAL CABLES:
15 2X1.5MM CABLE TYPE, EXTERNAL DIAMETER 10.6MM
B 2X R4.5 1X1.5MM CABLE TYPE, EXTERNAL DIAMETER 6.5MM
DESCRIPTION
5. IP DEGREE: IP56 COMMENTS
B
DETAIL C DETAIL D 6. COLOUR: RAL6034
SCALE 1 / 5 SCALE 1 / 5 7. WEIGHT: 84 KG
BILL OF
DRAWING STATUS PROJECT NR.
DETAIL A FOR APPROVAL 002-003247/002-003248
SCALE 1:4 VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION

1 30/6/2020 WITHOUT WRITTEN PERMISSION FROM

ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K E.GKOUNTI
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY STANDARD CONTROL PANEL 800X1000 A
FIRST ANGLE PROJECTION TH.KARASTERGIOS
SIZE DOCUMENT ID REV.
DETAIL B APPROVED BY A3 102-8001-027 1
SCALE 1:4 A. GKINOSATIS TAG: CP SCALE: 1 / 10 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 45
 6 5 4 3 2 1
REVISION HISTORY
REV DESCRIPTION REVISED BY DATE APPROVED BY
1 REVISED BOM P.STAIKOU 6/8/2020 A.GKINOSATIS

D D
1

3
MIN. (800)

C C
DETAIL A A
SCALE 1:2

MANUAL SAMPLING 2

3 1 101-9005-004 REDUCER 1/2 TO 3/8 TAPER

2 1 102-5001-002 CHLORINE SENSOR SPOOL DN15 PN10
1 1 1 101-5001-073 CHLORINE SENSOR 0-10 PPM
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
TRO RETURN
LINE DN15 FROM TRO BILL OF MATERIAL
BILL OF
SAMPLING PORT DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
NOTE: 323/329
1.CONNECTION STANDARD ISO PN10 PROJECT DETAILS
2.ALL GASKETS TO BE NON-ASBESTOS TYPE UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
3.IP66 CLASS (EXCEPT FAN IP54)
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
4.POWER: 100-240 VAC AUTO SWITCHABLE 47-63 HZ DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A 5.AMPERAGE: 2A (250VA)
6.FLOW RATE TO WASTE: 200-400 ML/MIN
DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY CHLORINE SENSOR MODULE 0-10 PPM ISO PN10 A
FIRST ANGLE PROJECTION L.XAGORARIS
7.WEIGHT: 11.8 KG SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5001-001 1
8.TRO RETURN LINE NOT ERMAFIRST SUPPLY A. GKINOSATIS TAG: TRO SCALE: 1:5 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 46
 6 5 4 3 2 1
( 65) (139)
B
( 95) 214
D 52 POWER IN INSTRUMENT D
4X ( 14) 88 CABLE GLAND PG16
45 45 SIGNAL OUT 4-20mA/MODBUS
146 POWER IN CHILLER
CABLE GLAND PG16
DETAIL B 32 301
337
CABLE GLAND PG16
INSTRUMENT DRAIN
SCALE 1:5 363
408 89 SIGNAL DIGITAL IN/OUT
CABLE GLAND PG16
REAGENT VENT 303 4X 9 3 REAGENT
INDICATOR BUFFER VENT DETAIL C
SCALE 1:2
C OPTICAL
BLOCK VENT
C
C
EXHAUST
AIR CHILLER 432
462 466
MAINTENANCE SPACE
561
250
212
174

AIR INTAKE
CHILLER
B EXHAUST (14) 123
DESCRIPTION
359
COMMENTS
B
AIR CHILLER
BILL OF
62 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
201
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY CHLORINE SENSOR MODULE 0-10 PPM ISO PN10 A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5001-001 1
A. GKINOSATIS TAG: TRO SCALE: 1:5 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 47
 6 5 4 3 2 1

D D

FLOW METER DIMENSIONS

P.C.D. No. OF WEIGHT RECOMMEMDED
C ERMAFIRST CODE DN A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) (mm) BOLTS
(mm) (KG) FLOW (M3/H) C
101-5002-001 DN80 217 23 17 200 200 397 160 8X 18 17 3.6-360
101-5002-002 DN100 290 23 17 220 250 433 180 8X 18 17 4.8-480
101-5002-003 DN150 296 25 19 285 300 512 240 8X 22 33 12-1200
101-5002-004 DN200 336 29 21 340 350 579 295 8X 22 41 21.6-2160
101-5002-005 DN250 351 31 23 395 450 620 350 12X 22 61 26-3600
101-5002-006 DN300 374 31 22 445 500 674 400 12X 22 74 48-4800
101-5002-007 DN350 389 31 22 505 550 703 460 16X 22 95 66-6600
101-5002-008 DN400 418 31 22 565 600 754 515 16X 26 103 90-9000
101-5002-009 DN450 444 44 35 615 686 827 565 20X 26 270 120-12000
B 101-5002-010 DN500 442 33 24 670 650 DESCRIPTION
823 620 20X 26 190 COMMENTS
132-13200
B
101-5002-023 DN600 493 35 25 780 780 OF 924
BILL 725 20X 30 246 192-19200
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
NOTES:
1.CONNECTION STANDARD ISO PN10 323/329

2.POWER SUPPLY: 24V DC PROJECT DETAILS

RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
3.IP DEGREE: IP65,IP67 UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
4.THE DIRECTION OF WATER IN THE FLOW METER 1/6/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS
IS INDICATED ON THE HOUSING BODY (FACTORY SETTINGS). DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER ABB
5.FOR INSTRUCTIONS ON HOW TO INVERT
A THE FLOW DIRECTION REFER TO MANUAL. DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW METER ISO PN10 NON-EX A
6.THE FLOW METER CAN WORK IN ALL INSTALLATION POSITION. FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
7.TYPE DESIGNATION FOR EX: Ex de IIC T4/T5/T6 Gb APPROVED BY A3 5002-1000-16
A. GKINOSATIS TAG: FM SCALE: 1 / 5 SHEET 1/6
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 48
 6 5 4 3 2 1

D D

B
C
A

F
C C

P.C.D E
No. OF BOLTS FLOW DIRECTION
B D
DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
1/6/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER ABB
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW METER ISO PN10 NON-EX A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 5002-1000-16
A. GKINOSATIS TAG: FM SCALE: 1 / 5 SHEET 2/6
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 49
 6 5 4 3 2 1

D (3X) CABLE
FLOW METER NON-EX SENSOR D
GLAND M20X1.5
204
126
121

37

37 POWER SUPPLY 128

193
C FLOW METER
C
117 SIGNAL 4-20mA
91

80 3
20
106 98 81

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
1/6/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER ABB
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW METER ISO PN10 NON-EX A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 5002-1000-16
A. GKINOSATIS TAG: FM SCALE: 1:3 SHEET 3/6
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 50
 6 5 4 3 2 1

D D

C FLOW METER DIMENSIONS C

P.C.D. No. OF WEIGHT RECOMMEMDED
ERMAFIRST CODE DN A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) (mm) BOLTS (KG) FLOW (M3/H)
(mm)
101-5002-013 DN150 364 25 19 285 300 570 240 8X 22 33 12-1200
101-5002-014 DN200 404 29 21 340 350 636 295 8X 22 41 21.6-2160
101-5002-015 DN250 419 31 23 395 450 677 350 12X 22 61 26-3600
101-5002-016 DN300 442 31 22 445 500 730 400 12X 22 74 48-4800
101-5002-017 DN350 457 31 22 505 550 760 460 16X 22 95 66-6600
101-5002-018 DN400 487 31 22 565 600 812 515 16X 26 103 90-9000
101-5002-019 DN450 511 44 35 615 686 881 565 20X 26 270 120-12000
B 101-5002-020 DN500 510 33 24 670 650 DESCRIPTION
878 620 20X 26 190 COMMENTS
132-13200
B
101-5002-024 DN600 560 35 25 780 780 OF 980
BILL 725 20X 30 246 192-19200
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
1/6/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER ABB
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW METER PN10 24V EXD A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 5002-1000-16
A. GKINOSATIS TAG: FM SCALE: 1:5 SHEET 4/6
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 51
 6 5 4 3 2 1

D D

B
A C
F

C C

P.C.D
No. OF BOLTS
D E
B FLOW DIRECTION
DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
1/6/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER ABB
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW METER PN10 24V EXD A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 5002-1000-16
A. GKINOSATIS TAG: FM SCALE: 1:5 SHEET 5/6
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 52
 6 5 4 3 2 1

D D
FLOW METER EX SENSOR (3X) CABLE
GLAND M20X1.5
POWER CABLE 170

FLOW METER 103

SIGNAL 4-20mA

45

C 45 C
75
194 135

35

168

80
B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
1/6/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER ABB
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW METER PN10 24V EXD A
FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 5002-1000-16
A. GKINOSATIS TAG: FM SCALE: 1:3 SHEET 6/6
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 53
 6 5 4 3 2 1
111 2X 6 3.5
101 6 5.25
48 E 5.5 2X R
Z D Y 6.5
D W
Z W X D
Y Z 2X R
105 92 64 80 98 105 2X R
Z Z 9.5 4X 4.5
Y W X
W
137 Z
Y DETAIL D DETAIL E
159
163
SCALE 1:2 SCALE 1:2
ALARM SIGNAL
DIGITAL INPUT (START/STOP)
ANALOGUE INPUT 4-20mA
POWER SUPPLY (230V)
C 119
AC 3 1.5MM C
110 244
110

201 205 201

A
36
DETAIL A
207
257
SCALE 1:2
B DESCRIPTION COMMENTS
B
CONTROL CUBE BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
PUMP OUTLET [G5/8]
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
13/9/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
PUMP INLET [G5/8]
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY DOSING PUMP 30LT/H 40M A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-7003-001
A. GKINOSATIS TAG: SCALE: 1:5 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 54
 6 5 4 3 2 1
REVISION HISTORY
REV DESCRIPTION REVISED BY DATE APPROVED BY
1 REVISED INFORMATION L.TSOUKSTOU 30/4/2020 A.GKINOSATIS

D INDEX D

INDEX ....................................................................................................................................................................................................................... SHEET 1/18

BUTTERFLY VALVES WITH GEARBOX AND LS (SAFE AREA) .......................................... SHEET 2/18
BUTTERFLY VALVES WITH GEARBOX AND LS (HAZARDOUS AREA) ..................... SHEET 3/18
BUTTERFLY VALVES WITH SOLENOID AND LS (SAFE AREA) .................................... SHEET 4/18
BUTTERFLY VALVES WITH SOLENOID AND LS (HAZARDOUS AREA) ............... SHEET 5/18
BUTTERFLY VALVES WITH POSITIONER (SAFE AREA) .......................................................... SHEET 6/18
BUTTERFLY VALVES WITH POSITIONER (HAZARDOUS AREA) ..................................... SHEET 7/18
VALVE BODY DN50-DN300 .......................................................................................................................................................... SHEET 8/18
VALVE BODY DN350-DN700 ....................................................................................................................................................... SHEET 9/18
GEAR BOX ....................................................................................................................................................................................................... SHEET 10/18
C C
ACTUATOR DIMENSIONS .............................................................................................................................................................. SHEET 11/18
ACTUATOR CONNECTIONS .................................................................................................................................................... SHEET 12/18
SOLENOID VALVE (SAFE AREA) .............................................................................................................................. SHEET 13/18
SOLENOID VALVE (HAZARDOUS AREA) ......................................................................................................... SHEET 14/18
LIMIT SWITCH (SAFE AREA) .......................................................................................................................................... SHEET 15/18
LIMIT SWITCH (HAZARDOUS AREA) ..................................................................................................................... SHEET 16/18
POSITIONER (SAFE AREA) ................................................................................................................................................ SHEET 17/18
POSITIONER (HAZARDOUS AREA) ........................................................................................................................... SHEET 18/18

B B
DESCRIPTION COMMENTS
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS INDEX A
PER ASME Y14.5M-2009 CHECKED BY
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 1/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 55
 6 5 4 3 2 1

D LIMIT SWITCH APL 210N D

101-6003-209
(SHEET 15) GEAR-BOX
(SHEET 10)
BRACKET
(SHEET 10)

VALVE BODY
(SHEET 8-9) MARINE TYPE GEAR-BOX VALVES [NON EX]
ERMAFIRST HT WH WEIGHT
CODE DESCRIPTION [mm] [mm] [kg]
101-6003-002 BUTTERFLY DN150 PN10 GEARBOX LS MAR 524 274 11
101-6003-003 BUTTERFLY DN200 PN10 GEARBOX LS MAR 602 374 17
C C
101-6003-004 BUTTERFLY DN250 PN10 GEARBOX LS MAR 665 402 25
101-6003-005 BUTTERFLY DN300 PN10 GEARBOX LS MAR 722 427 35
101-6003-006 BUTTERFLY DN350 PN10 GEARBOX LS MAR 823 537 52
101-6003-007 BUTTERFLY DN400 PN10 GEARBOX LS MAR 874 492 86
101-6003-064 BUTTERFLY DN100 PN10/5K GEARBOX LS MAR 468 246 8
101-6003-065 BUTTERFLY DN150 PN10/5K GEARBOX LS MAR 524 274 11
101-6003-066 BUTTERFLY DN200 PN10/5K GEARBOX LS MAR 602 374 17
101-6003-067 BUTTERFLY DN250 PN10/5K GEARBOX LS MAR 665 402 25
101-6003-068 BUTTERFLY DN300 PN10/5K GEARBOX LS MAR 722 427 35
101-6003-069 BUTTERFLY DN350 PN10/5K GEARBOX LS MAR 823 537 52
B 101-6003-070 BUTTERFLY DN400 PN10/5K GEARBOX LS MAR 874 492 86 B
DESCRIPTION COMMENTS
101-6003-131 BUTTERFLY DN500 PN10/10K GEARBOX LS MAR 989 590 160
BILL OF
DRAWING STATUS PROJECT NR.
HT FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS A
PER ASME Y14.5M-2009 CHECKED BY BUTTERFLY GEARBOX WITH LS (SAFE AREA)
FIRST ANGLE PROJECTION L.XAGORARIS
WH SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 2/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 56
 6 5 4 3 2 1

LIMIT SWITCH APL 510N

D 101-6003-467 D
(SHEET 16)
BRACKET
(SHEET 10)

MARINE TYPE GEAR-BOX VALVES [EX]

GEAR BOX ERMAFIRST HT WH WEIGHT
(SHEET 10) CODE DESCRIPTION [mm] [mm] [kg]
101-6003-008 BUTTERFLY DN100 PN10 GEARBOX LS MAR EXD 497 239 9
101-6003-009 BUTTERFLY DN150 PN10 GEARBOX LS MAR EXD 553 267 12
101-6003-010 BUTTERFLY DN200 PN10 GEARBOX LS MAR EXD 645 352 18
101-6003-011 BUTTERFLY DN250 PN10 GEARBOX LS MAR EXD 732 445 31
C C
VALVE BODY 101-6003-012 BUTTERFLY DN300 PN10 GEARBOX LS MAR EXD 789 469 41
(SHEET 8-9)
101-6003-013 BUTTERFLY DN350 PN10 GEARBOX LS MAR EXD 806 282 56
101-6003-014 BUTTERFLY DN400 PN10 GEARBOX LS MAR EXD 906 528 90
101-6003-071 BUTTERFLY DN100 PN10/5K GEARBOX LS MAR EXD 497 239 9
101-6003-072 BUTTERFLY DN150 PN10/5K GEARBOX LS MAR EXD 553 267 12
101-6003-073 BUTTERFLY DN200 PN10/5K GEARBOX LS MAR EXD 645 352 18
101-6003-074 BUTTERFLY DN250 PN10/5K GEARBOX LS MAR EXD 732 445 31
101-6003-075 BUTTERFLY DN300 PN10/5K GEARBOX LS MAR EXD 789 469 41
101-6003-076 BUTTERFLY DN350 PN10/5K GEARBOX LS MAR EXD 806 282 56
101-6003-077 BUTTERFLY DN400 PN10/5K GEARBOX LS MAR EXD 906 528 90
B B
DESCRIPTION COMMENTS
BILL OF
HT DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS A
PER ASME Y14.5M-2009 CHECKED BY BUTTERFLY GEARBOX WITH LS (HAZARDOUS
AREA)
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
WH APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 3/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 57
 6 5 4 3 2 1
BUTTERFLY VALVES WITH SOLENOID AND LIMIT SWITCH (NON-EX)
ERMAFIRST DESCRIPTION HT WH WEIGHT
CODE (mm) (mm) (kg)
101-6003-015 BUTTERFLY DN100 PN10 SOLENOID LS 24V MAR 538 203 9
D D
101-6003-016 BUTTERFLY DN150 PN10 SOLENOID LS 24V MAR 635 259 13
101-6003-017 BUTTERFLY DN200 PN10 SOLENOID LS 24V MAR 684 270 19
101-6003-018 BUTTERFLY DN250 PN10 SOLENOID LS 24V MAR 809 325 30
101-6003-019 BUTTERFLY DN300 PN10 SOLENOID LS 24V MAR 854 395 46
101-6003-020 BUTTERFLY DN350 PN10 SOLENOID LS 24V MAR 924 425 60 LIMIT SWITCH APL 210N
101-6003-021 BUTTERFLY DN400 PN10 SOLENOID LS 24V MAR 1017 485 100
101-6003-209
(SHEET 15)
101-6003-022 BUTTERFLY DN450 PN10 SOLENOID LS 24V MAR 1125 535 144
ACTUATOR
101-6003-023 BUTTERFLY DN500 PN10 SOLENOID LS 24V MAR 1270 590 174 (SHEET 11-12)
101-6003-025 BUTTERFLY DN600 PN10 SOLENOID LS 24V MAR 1422 710 296
101-6003-078 BUTTERFLY DN100 PN10/5K SOLENOID LS 24V MAR 538 203 9 SOLENOID VALVE
(SHEET 13)
101-6003-079 BUTTERFLY DN150 PN10/5K SOLENOID LS 24V MAR 635 259 13
C 101-6003-080 BUTTERFLY DN200 PN10/5K SOLENOID LS 24V MAR 684 270 19 C

101-6003-081 BUTTERFLY DN250 PN10/5K SOLENOID LS 24V MAR 809 325 30

HT
101-6003-082 BUTTERFLY DN300 PN10/5K SOLENOID LS 24V MAR 854 395 46 VALVE BODY
101-6003-083 BUTTERFLY DN350 PN10/5K SOLENOID LS 24V MAR 924 425 60 (SHEET 8-9)
101-6003-084 BUTTERFLY DN400 PN10/5K SOLENOID LS 24V MAR 1017 485 100
101-6003-085 BUTTERFLY DN450 PN10/5K SOLENOID LS 24V MAR 1125 535 144
101-6003-086 BUTTERFLY DN500 PN10/5K SOLENOID LS 24V MAR 1270 590 174
101-6003-088 BUTTERFLY DN600 PN10/5K SOLENOID LS 24V MAR 1422 710 296
101-6003-127 BUTTERFLY DN80 PN10 SOLENOID LS 24V MAR 507 154 6
101-6003-129 BUTTERFLY DN65 PN10 SOLENOID LS 24V MAR 463 154 5
101-6003-149 BUTTERFLY DN50 PN10 SOLENOID LS 24V MAR 439 153 4
B
BUTTERFLY DN65 LUG PN10 SOLENOID LS 24V B
101-6003-184 463 154 7 WH
MAR DESCRIPTION COMMENTS
BUTTERFLY DN250 LUG PN10 SOLENOID LS 24V BILL OF
101-6003-185 809 325 42
MAR DRAWING STATUS PROJECT NR.
BUTTERFLY DN65 PN10 SOLENOID SINGLE FOR APPROVAL 002-003247/002-003248
101-6003-231 463 154 6
ACTUATED NC LS 24V MAR VESSEL SHIPYARD
BUTTERFLY DN80 PN10 SOLENOID SINGLE 323/329
101-6003-360 391 154 6
ACTUATED NC LS 24V MAR PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
BUTTERFLY DN100 PN10 SOLENOID SINGLE UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
101-6003-361 538 203 9 (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO ERMA FIRST
ACTUATED NC LS 24V MAR OTHERS OR USED FOR ANY PURPOSE THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
BUTTERFLY DN150 PN10 SOLENOID SINGLE ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
101-6003-362 519 259 14 DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
ACTUATED NC LS 24V MAR DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS BUTTERFLY WITH SOLENOID AND LS 24V MAR A
101-6003-366 BUTTERFLY 500A 10K SOLENOID LS 24V MAR 1270 590 174 PER ASME Y14.5M-2009 CHECKED BY
101-6003-368 BUTTERFLY 80A 10K SOLENOID LS 24V MAR 507 154 6 FIRST ANGLE PROJECTION L.XAGORARIS
101-6003-369 BUTTERFLY 400A 10K SOLENOID LS 24V MAR 1017 485 100 SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 4/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 58
 6 5 4 3 2 1
BUTTERFLY VALVES WITH SOLENOID AND LIMIT SWITCH (EX)
ERMAFIRST DESCRIPTION HT WEIGHT WH
CODE (mm) (kg) (mm)
101-6003-026 BUTTERFLY DN100 PN10 SOLENOID LS 24V MAR EXD 583 9 203 LIMIT SWITCH APL 510N
D
101-6003-467 D
101-6003-027 BUTTERFLY DN150 PN10 SOLENOID LS 24V MAR EXD 652 13 259 (SHEET 16)
101-6003-028 BUTTERFLY DN200 PN10 SOLENOID LS 24V MAR EXD 729 19 270
101-6003-029 BUTTERFLY DN250 PN10 SOLENOID LS 24V MAR EXD 812 30 325
SOLENOID VALVE
101-6003-030 BUTTERFLY DN300 PN10 SOLENOID LS 24V MAR EXD 901 46 395 ACTUATOR (SHEET 14)
101-6003-031 BUTTERFLY DN350 PN10 SOLENOID LS 24V MAR EXD 1069 60 425 (SHEET 10-11)
101-6003-032 BUTTERFLY DN400 PN10 SOLENOID LS 24V MAR EXD 1062 100 485
101-6003-033 BUTTERFLY DN450 PN10 SOLENOID LS 24V MAR EXD 1169 144 535 WH
101-6003-034 BUTTERFLY DN500 PN10 SOLENOID LS 24V MAR EXD 1214 174 590
101-6003-036 BUTTERFLY DN600 PN10 SOLENOID LS 24V MAR EXD 1466 296 710 VALVE BODY
101-6003-089 BUTTERFLY DN100 PN10/5K SOLENOID LS 24V MAR EXD 583 9 203 (SHEET 8-9)
101-6003-090 BUTTERFLY DN150 PN10/5K SOLENOID LS 24V MAR EXD 652 13 259
C 101-6003-091 BUTTERFLY DN200 PN10/5K SOLENOID LS 24V MAR EXD 729 19 270 C
101-6003-092 BUTTERFLY DN250 PN10/5K SOLENOID LS 24V MAR EXD 812 30 325
101-6003-093 BUTTERFLY DN300 PN10/5K SOLENOID LS 24V MAR EXD 901 46 395
101-6003-094 BUTTERFLY DN350 PN10/5K SOLENOID LS 24V MAR EXD 1069 60 425
101-6003-095 BUTTERFLY DN400 PN10/5K SOLENOID LS 24V MAR EXD 1062 100 485 HT
101-6003-096 BUTTERFLY DN450 PN10/5K SOLENOID LS 24V MAR EXD 1169 144 535
101-6003-097 BUTTERFLY DN500 PN10/5K SOLENOID LS 24V MAR EXD 1214 174 590
101-6003-099 BUTTERFLY DN600 PN10/5K SOLENOID LS 24V MAR EXD 1466 296 710
101-6003-135 BUTTERFLY DN250 PN10 SOLENOID LS 240V MAR EXD 812 30 325
101-6003-136 BUTTERFLY DN80 PN10 SOLENOID LS 24V MAR EXD 507 6 524
101-6003-189 BUTTERFLY DN400 LUG PN10 SOLENOID LS 24V MAR EXD 1062 114 485
101-6003-192 BUTTERFLY DN80 LUG PN10 SOLENOID LS 24V MAR EXD 507 8 524
B B
101-6003-205 BUTTERFLY DN65 PN10 SOLENOID LS 24V MAR EXD 463 5 154
DESCRIPTION COMMENTS
101-6003-254 BUTTERFLY DN700 PN10 SOLENOID LS 24V MAR EXD 1750 376 926
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS BUTTERFLY VALVE WITH SOLENOID LS 24V MAR A
PER ASME Y14.5M-2009 CHECKED BY
EXD
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 5/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 59
 6 5 4 3 2 1
BUTTERFLY VALVES WITH POSITIONER (NON-EX)
ERMAFIRST DESCRIPTION WEIGHT
CODE HT (mm) WH (mm) (kg)
101-6003-037 BUTTERFLY DN65 PN10 POSITIONER MAR 499 154 9 VALVE ELECTRO-PNEUMATIC POSITIONER MAR
D 101-6003-038 BUTTERFLY DN80 PN10 POSITIONER MAR 540 154 10 101-6003-146 D
(SHEET 17)
101-6003-040 BUTTERFLY DN100 PN10 POSITIONER MAR 573 203 13
101-6003-041 BUTTERFLY DN150 PN10 POSITIONER MAR 638 259 17 WH
101-6003-042 BUTTERFLY DN200 PN10 POSITIONER MAR 677 270 23
ACTUATOR
101-6003-043 BUTTERFLY DN250 PN10 POSITIONER MAR 807 325 34 (SHEET 11-12)
101-6003-044 BUTTERFLY DN300 PN10 POSITIONER MAR 889 395 50
101-6003-045 BUTTERFLY DN350 PN10 POSITIONER MAR 958 425 64
COPPER TUBE
101-6003-046 BUTTERFLY DN400 PN10 POSITIONER MAR 1052 485 104 FOR
101-6003-047 BUTTERFLY DN450 PN10 POSITIONER MAR 1159 535 148 AIR SUPPLY
101-6003-048 BUTTERFLY DN500 PN10 POSITIONER MAR 1237 590 178
101-6003-050 BUTTERFLY DN600 PN10 POSITIONER MAR 1557 710 300
C 101-6003-063 BUTTERFLY DN50 PN10 POSITIONER MAR 475 154 8 C
101-6003-100 BUTTERFLY DN50 PN10/5K POSITIONER MAR 475 154 8
VALVE BODY
101-6003-101 BUTTERFLY DN65 PN10/5K POSITIONER MAR 499 154 9 (SHEET 8-9)
101-6003-102 BUTTERFLY DN80 PN10/5K POSITIONER MAR 540 154 10 HT
101-6003-104 BUTTERFLY DN100 PN10/5K POSITIONER MAR 573 203 13
101-6003-105 BUTTERFLY DN150 PN10/5K POSITIONER MAR 638 259 17
101-6003-106 BUTTERFLY DN200 PN10/5K POSITIONER MAR 677 270 23
101-6003-107 BUTTERFLY DN250 PN10/5K POSITIONER MAR 807 325 34
101-6003-108 BUTTERFLY DN300 PN10/5K POSITIONER MAR 889 395 50
101-6003-109 BUTTERFLY DN350 PN10/5K POSITIONER MAR 958 425 64
101-6003-110 BUTTERFLY DN400 PN10/5K POSITIONER MAR 1052 485 104
101-6003-111 BUTTERFLY DN450 PN10/5K POSITIONER MAR 1159 535 148
B B
101-6003-112 BUTTERFLY DN500 PN10/5K POSITIONER MAR 1237 590 178
DESCRIPTION COMMENTS
101-6003-114 BUTTERFLY DN600 PN10/5K POSITIONER MAR 1557 710 300
BILL OF
101-6003-186 BUTTERFLY DN200 LUG PN10 POSITIONER MAR 719 327 4 DRAWING STATUS PROJECT NR.
101-6003-187 BUTTERFLY DN50 LUG PN10 POSITIONER MAR 475 273 4 FOR APPROVAL 002-003247/002-003248
101-6003-193 BUTTERFLY DN100 LUG PN10 POSITIONER MAR 573 270 4 VESSEL SHIPYARD
101-6003-365 BUTTERFLY 500A 10K POSITIONER MAR 1237 590 178 323/329
101-6003-367 BUTTERFLY 100A 10K POSITIONER MAR 573 203 13 PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS A
PER ASME Y14.5M-2009 CHECKED BY
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 6/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 60
 6 5 4 3 2 1
BUTTERFLY VALVES WITH POSITIONER (EX)
ERMAFIRST DESCRIPTION HT (mm) WH (mm) WEIGHT (kg)
CODE
101-6003-051 BUTTERFLY DN65 PN10 POSITIONER MAR EXD 565 154 11 VALVE ELECTRO-PNEUMATIC POSITIONER MAR ExD
D
101-6003-134 D
101-6003-052 BUTTERFLY DN80 PN10 POSITIONER MAR EXD 585 154 11 (SHEET 18)
101-6003-054 BUTTERFLY DN100 PN10 POSITIONER MAR EXD 635 203 14
101-6003-055 BUTTERFLY DN150 PN10 POSITIONER MAR EXD 700 259 18
101-6003-056 BUTTERFLY DN200 PN10 POSITIONER MAR EXD 781.5 270 25 ACTUATOR
101-6003-057 BUTTERFLY DN250 PN10 POSITIONER MAR EXD 863 325 36 (SHEET 11-12)
101-6003-058 BUTTERFLY DN300 PN10 POSITIONER MAR EXD 946 395 52
101-6003-059 BUTTERFLY DN350 PN10 POSITIONER MAR EXD 1120 425 65
101-6003-060 BUTTERFLY DN400 PN10 POSITIONER MAR EXD 1115 485 106 COPPER TUBE
101-6003-061 BUTTERFLY DN450 PN10 POSITIONER MAR EXD 1222 535 150
FOR
AIR SUPPLY
101-6003-062 BUTTERFLY DN500 PN10 POSITIONER MAR EXD 1366 590 180
101-6003-115 BUTTERFLY DN65 PN10/5K POSITIONER MAR EXD 565 154 11
C
101-6003-116 BUTTERFLY DN80 PN10/5K POSITIONER MAR EXD 585 154 11 C
101-6003-118 BUTTERFLY DN100 PN10/5K POSITIONER MAR EXD 635 203 14 HT
101-6003-119 BUTTERFLY DN150 PN10/5K POSITIONER MAR EXD 700 259 18 VALVE BODY
101-6003-120 BUTTERFLY DN200 PN10/5K POSITIONER MAR EXD 781.5 270 25 (SHEET 8-9)
101-6003-121 BUTTERFLY DN250 PN10/5K POSITIONER MAR EXD 863 325 36
101-6003-122 BUTTERFLY DN300 PN10/5K POSITIONER MAR EXD 946 395 52
101-6003-123 BUTTERFLY DN350 PN10/5K POSITIONER MAR EXD 1120 425 65
101-6003-124 BUTTERFLY DN400 PN10/5K POSITIONER MAR EXD 1115 485 106
101-6003-125 BUTTERFLY DN450 PN10/5K POSITIONER MAR EXD 1222 535 150
101-6003-126 BUTTERFLY DN500 PN10/5K POSITIONER MAR EXD 1366 590 180
101-6003-144 BUTTERFLY DN50 PN10/5K POSITIONER MAR EXD 537 154 10
101-6003-253 BUTTERFLY DN50 PN10 POSITIONER MAR EXD 537 154 10
B B
DESCRIPTION COMMENTS
WH
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS A
PER ASME Y14.5M-2009 CHECKED BY
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 7/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 61
 6 5 4 3 2 1

D D

BODY DIMENSIONS
PCD - ISO PN10 WEIGHT
DN A (mm) B (mm) C (mm) PCD (mm) PCD (mm) PCD (mm) (kg)
- ISO PN10 - JIS 5K - JIS 10K
A DN50 138 81 43 125 105 120 2.8
DN65 144 98 46 145 130 140 3.7
C C
PCD JIS 10K DN80 158 110 46 160 145 150 4
DN100 173 128 52 180 165 175 6
DN150 202 155 56 240 230 240 9.1
DN200 240 190 60 295 280 290 14
DN250 270 220 68 350 345 355 22
DN300 300 247 78 400 390 400 32
B

NOTES:
1. BODY: EN-GJS 400-15
C 2. DISK: ASTM A351 CF8M
PCD - JIS 5K 3. SEAR: SOFT SEAT
B 4. SHAFT: AISI 430 B
5. PRESSURE RATING: 6-16DESCRIPTION
BAR COMMENTS
6. ATEX EX II 2GD c T5
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS BUTTERFLY VALVE BODY A
PER ASME Y14.5M-2009 CHECKED BY
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 8/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 62
 6 5 4 3 2 1

D D

PCD - ISO PN10

BODY DIMENSIONS
A PCD - JIS 10K WEIGHT
DN A (mm) B (mm) C (mm) PCD (mm) PCD (mm) PCD (mm) (kg)
- ISO PN10 - JIS 5K - JIS 10K
PCD - JIS 5K
DN350 330 280 78 460 435 445 42
C C
DN400 355 305 102 515 495 510 76
DN450 400 343 114 565 555 565 110
DN500 422 366 127 620 605 620 140
DN600 495 460 154 725 715 730 220
B DN700 550 506 165 840 820 840 300

NOTES:
1. BODY: EN-GJS 400-15
2. DISK: ASTM A351 CF8M
C 3. SEAR: SOFT SEAT
4. SHAFT: AISI 430
B 5. PRESSURE RATING: 6-16 BAR B
6. ATEX EX II 2GD c T5 DESCRIPTION COMMENTS
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS BUTTERFLY VALVE BODY A
PER ASME Y14.5M-2009 CHECKED BY
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 9/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 63
 6 5 4 3 2 1

45 45
D D
GEAR BOX DIMENSIONS - NON-ATEX TYPE
62 65
2 WEIGHT
100 124 DN SIZE A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) (kg)
7 DN80-DN150 HW070 48 140 27 80 115 165 1.6
DN200-DN300 HW102 56 300 33 120 150 240 3
DN350-DN400 HW140 95 350 / 400 51 185 225 250 10
4X 7 DN450-DN500 HW165 105 600 61 230 268 395 20
124 DN600 HW254 125 700 80 265 332 416 25
35

GEAR BOX DIMENSIONS - ATEX TYPE

C C
WEIGHT
7 DN SIZE A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) (kg)
DN80 - DN150 AB150 55 200 27 80 124 158 2.2
100 DN200 AB215 63 200 29 102 128 217 3.5
DN250-DN300 AB550 88 300 41 138 174 282 8.5
DN350-DN500 AB880 93 400 42 200 226 282 14
DN600 AB1250 102 500 48 220 258 322 22

A NOTES FOR NON-EX NOTES FOR EX:

B
1. BODY: ALUMINIUM 1. BODY: DUCTILE IRON
2. SHAFT: STAINLES STEEL 2. SHAFT: STEEL
B C 3. HANDWHEEL: STEEL 3. HANDWHEEL: STEEL B
4. PROTECTION: IP65 4. PROTECTION: IP67
DESCRIPTION COMMENTS
5. TEMPERATURE: -20/ +120 C 5. TEMPERATURE: -20/ +120 C
BILL OF
DRAWING STATUS PROJECT NR.
D FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
E UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS GEAR-BOX A
PER ASME Y14.5M-2009 CHECKED BY
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
F
A. GKINOSATIS TAG: SCALE: SHEET 10/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 64
 6 5 4 3 2 1

A
D D E D

C
ACTUATOR DIMENSIONS
C VALVE WEIGHT DA WEIGHT SR C
DIMENSION SIZE A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) (kg) (kg)
DN50-DN80 AT101U [D/S] 154 85 85 20 42 160 90 1.6 1.8
DN100-DN125 AT201U [D/S] 204 102 93 20 42 210 110 2.7 3
F
DN150 AT251U [D/S] 241 115 106 20 42 250 120 3.8 4.4
DN200 AT301U [D/S] 259 127 119 20 42 265 135 5.2 6
DN250 AT351U [D/S] 304 145 136 30 48 310 150 8.1 9.4
G DN300 AT451U [D/S] 395 177 166 30 68 400 185 14.2 17.1
DN350 AT501U [D/S] 423 196 181 30 68 430 200 17.8 21.4
DN400 AT551U [D/S] 474 221 200 50 80 500 225 24.3 32.7
B DN450-DN500 AT601U [D/S] 528 245 222 50 80
DESCRIPTION
535 250 34.3 43.6
COMMENTS
B
DN600 AT701U [D/S] 710 330 330 50 115 715 335 76.3 95.5
BILL OF
DRAWING STATUS PROJECT NR.
MAINTENANCE SPACE FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PNEUMATIC ACTUATOR A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 11/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 65
 6 5 4 3 2 1

D D

A
ACTUATOR DIMENSIONS
VALVE DIMENSION SIZE H I (mm) J (mm) T 228
ISO

DN50-DN80 AT101U [D/S] M5 X 8 32 24 1/8''

DN100-DN125 AT201U [D/S] M5 X 8 32 24 1/8''
C DN150 AT251U [D/S] M5 X 8 32 24 1/8'' C
DN200 AT301U [D/S] M5 X 8 32 24 1/4''
DN250 AT351U [D/S] M5 X 8 32 24 1/4''
DN300 AT451U [D/S] M5 X 8 32 24 1/4''
DN350 AT501U [D/S] M5 X 8 32 24 1/4''
DN400 AT551U [D/S] M5 X 8 32 24 1/4''
PORT 2 PORT 4
DN450-DN500 AT601U [D/S] M5 X 8 32 24 1/4''
DN600 AT701U [D/S] M6 X 10 45 40 1/2

I NOTES:
1. ENCLOSURE: ALODUR HARD ANODIZED BODY
B 2.
3.
SUPPLY AIR PRESSURE: 5.5 - 7 BAR
AIR CONNECTIONS:
DESCRIPTION VDI/ VDE 3845 COMMENTS
B
4. TEMPERATURE: -20 / +80 C
T 4X H 5. ATEX
BILL94/9EC:
OF II 2GD c T95 C
J DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
DETAIL A PROJECT DETAILS
SCALE 1 / 2 UNLESS OTHERWISE SPECIFIED RELEASE DATE
(DY-MO-YEAR)
THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PNEUMATIC ACTUATOR A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 12/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 66
 6 5 4 3 2 1
MAX 145

D D
NOTES: G1/2''
1. BODY: ALUMINIUM
2. MEDIA: DRY OR LUBRICATED AIR CABLE CONNECTION:
3. TEMPERATURE: -10 C/ +50 C 80 3-PIN PLUG OR 3-WIRE CABLE
4. VOLTAGE: 24V DC
5. PORT SIZE: G1/4''
6. PROTECTION DEGREE: IP65
7. COMBINED SPRING & AIR RETURN (MONOSTABLE)
8. FOR VALVE SIZES UP TO (INCLUDING) DN500 57
9. FOR ACTUATOR SIZES UP TO (INCLUDING) AT601
ERMAFIRST CODE: 101-6003-215 G1/2''
DESCRIPTION: SOLENOID 5/2 1/4" NAMUR ALUM 24 VDC EMBEDED COIL/CONNECTOR COMPRESSED AIR SUPPLY: 5.5-7 BAR
C C
MAX 130

MAX 190
NOTES:
1. BODY: ALUMINIUM
2. MEDIA: DRY OR LUBRICATED AIR
3. TEMPERATURE: -10 C/ +50 C
4. VOLTAGE: 24V DC
G1/4'' 5. PORT SIZE: G1/2''
6. PROTECTION DEGREE: IP65
7. COMBINED SPRING & AIR RETURN (MONOSTABLE)
8. FOR VALVE SIZES DN600 AND DN700
B 80 CABLE CONNECTION:
3-PIN PLUG OR 3-WIRE CABLE
9. FOR ACTUATOR SIZES AT701 AND AT751
DESCRIPTION COMMENTS
B
ERMAFIRST CODE: 101-6003-404
DESCITPION: SOLENOID 5/2 1/2'' NAMUR ALUM 24VDC EMBEDED COIL/CONNECTOR
BILL OF
DRAWING STATUS PROJECT NR.
60 G1/4'' FOR APPROVAL 002-003247/002-003248
COMPRESSED AIR SUPPLY: 5.5-7 BAR
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A MAX 160 DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY SOLENOID VALVE [FOR SAFE AREA] A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 13/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 67
 6 5 4 3 2 1
MAX 145
NOTES:
1. BODY: ALUMINIUM
D 2.
3.
MEDIA: DRY OR LUBRICATED AIR
TEMPERATURE: -40 C/ +65 C
40 D
4. VOLTAGE: 24V DC
5. PORT SIZE: G1/4'' G1/2''
6. PROTECTION DEGREE: IP67
7. COMBINED SPRING & AIR RETURN (MONOSTABLE)
8. II 2G- Ex d mb IIC T4 135
9. ELECTRIC CONNECTION: M20x1.5
10. FOR VALVE SIZES UP TO (INCLUDING) DN500
11. FOR ACTUATOR SIZES UP TO (INCLUDING) AT601
ERMAFIRST CODE: 101-6003-204 CABLE CONNECTION
DESCRIPTION: SOLENOID 5/2 1/4'' NAMUR ALUM 24 VDC EMBEDED COIL/CONN 60
EXD

G1/2''
COMPRESSED AIR SUPPLY: 5.5-7 BAR
C MAX 135 C
MAX 240
40 NOTES:
1. BODY: ALUMINIUM
2. MEDIA: DRY OR LUBRICATED AIR
3. TEMPERATURE: -40 C/ +65 C
4. VOLTAGE: 24V DC
5. PORT SIZE: G1/4''
G1/4'' 6. PROTECTION DEGREE: IP67
7. COMBINED SPRING & AIR RETURN (MONOSTABLE)
8. II 2G- Ex d mb IIC T4
9. ELECTRIC CONNECTION: M20x1.5
135 10. FOR VALVE SIZES DN600 AND DN700
11. FOR ACTUATOR SIZES AT701 AND AT751
B DESCRIPTION COMMENTS
B
ERMAFIRST CODE: 101-6003-468
CABLE CONNECTION DESCRIPTION: SOLENOID 5/2
BILL1/2''
OF NAMUR ALUM 24 VDC EMBEDED COIL/CONN EXD
60 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
MAX 225 ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A G1/4''
COMPRESSED AIR SUPPLY: 5.5-7 BAR
DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY SOLENOID VALVE 24 VDC Ex A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 14/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 68
 6 5 4 3 2 1

D 2X NPT 1/2'' DETAIL B D

BRACKET
SCALE 1 / 5
72
105

C 88
C

44

112
NOTES:
1. TYPE: APL 2N [FOR SAFE AREAS]
2. ENCLOSURE: WEATHERPROOF IP67/ NEMA4&4X
3. CONDUIT ENTRIES: 2x NPT 1/2''
4. POSITION INDICATOR: 0 -90
B DESCRIPTION COMMENTS
B
101-6003- LIMIT SWITCH BOX 2XSPDT 210N NON EX
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
75 323/329
PROJECT DETAILS
115 RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
150 9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
60 GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY LIMIT SWITCH APL210 A
FIRST ANGLE PROJECTION
BRACKET L.XAGORARIS
APPROVED BY
SIZE
A3
DOCUMENT ID
6003-1000-16 1
REV.

A. GKINOSATIS TAG: SCALE: SHEET 15/18

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 69
 6 5 4 3 2 1
DETAIL C
NPT 3/4''
SCALE 1 / 5
D D
C
136 121

BRACKET
2X NPT 3/4'' 75

115

C 150 C
60

BRACKET
119
58
NOTES:
1. TYPE: APL 5N [FOR HAZAARDOUS AREAS]
2. ENCLOSURE: WEATHERPROOF IP67/ NEMA4&4X
3. EXPLOSIONPROOF E EX d IIC T6
116 4. CONDUIT ENTRIES: 2x NPT 3/4''
5. POSITION INDICATOR: 0 -90
B DESCRIPTION COMMENTS
B
101-6003-467 LIMIT SWITCH BOX 2XSPDT 510N EXD
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY LIMIT SWITCH APL510N A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 16/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 70
 6 5 4 3 2 1

D 99 D
95

97

185 M20 X 1.5

C G 1/4''
OR BRACKET C
1/4'' NPT

NOTES:
1. TYPE: SIPART PS2 [FOR SAFE AREAS]
2. ENCLOSURE: STAINLESS STEEL
3. POWER SUPPLY: 24V
4. CABLE GLAND: M20 X 1.5
5. COMPRESSED AIR CONNECTIONS: G 1/4'' ''OR 1/4 NPT
6. SUPPLY PRESSURE: 5.5-7 BAR
7. WEIGHT: APPROX. 3.9 KG

101-6003-145 VALVE ELECTRO-PNEUMATIC POSITIONER MAR

B 55 WHEN UPGRADING OR SERVICING A VALVE, THE ITEMS REQUIRED ARE:

POSITIONER INSTALLATION KIT VDI/VDE 3845 (101-6003-147) B
POSITIONER MOUNTING CONSOLE 80x30x20DESCRIPTION
(101-6003-148) COMMENTS
BILL OF
DRAWING STATUS PROJECT NR.
69
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
130
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
70 9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L.TSOUKSTOU
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY VALVE ELECTRO-PNEUMATIC POSITIONER MAR A
BRACKET FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 17/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 71
 6 5 4 3 2 1

D G 1/4''
OR
1/4'' NPT
M20 X 1.5
OR
D
M25 X 1.5
OR
1/2'' NPT

159

C 142 235 C
NOTES: BRACKET
1. TYPE: SIPART PS2 EEx d [FOR HAZARDOUS AREAS]
2. SUPPLY PRESSURE 5.5-7 BAR
3. POWER SUPPLY: 24V DC
4. ENCLOSURE: FLAMEPROOF CASING
5. PROTECTION CLASS: IP66 - EEXD
6. PNEUMATIC PORT: G 1/4'' OR 1/4'' NPT
7. CABLE GLAND: M20x1.5 OR M25X1.5 OR 1/2'' NPT
8. WEIGHT: 5.2 KG

101-6003-134 VALVE ELECTRO-PNEUMATIC POSITIONER MAR ExD

55
B WHEN UPGRADING OR SERVICING A VALVE, THE ITEMS REQUIRED ARE:
POSITIONER INSTALLATION KIT VDI/VDE 3845 (101-6003-147) B
POSITIONER MOUNTING CONSOLE 80x30x20 DESCRIPTION
(101-6003-148) COMMENTS
BILL OF
69 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
130
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
9/8/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
A BRACKET GENERAL TOLERANCES PER ISO2768-m-K
DIMENSIONING AND TOLERANSING AS
L.TSOUKSTOU
CHECKED BY VALVE ELECTRO-PNEUMATIC POSITIONER MAR ExD A
PER ASME Y14.5M-2009 (FOR HAZARDOUS AREA)
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 6003-1000-16 1
A. GKINOSATIS TAG: SCALE: SHEET 18/18
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 72
 6 5 4 3 2 1

D D
2
1

C C

2 2 102-2003-004 FLANGED NECK DN20 PN10

1 1 102-6001-004 GLOBE VALVE DN20 THREADED BRASS PNEUMATIC
24V
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
6/8/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY GLOBE VALVE DN20 PN10 BRASS PNEUMATIC 24V A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-6001-003
A. GKINOSATIS TAG: CWS SCALE: 1 / 2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 73
 6 5 4 3 2 1
NOTES
1. CONNECTION STANDART ISO PN10
2. ALL GASKETS TO BE NON-ASBESTOS TYPE
85
D D
43 47

AIR SUPPLY
99 8 COPPER TUBE

36

C C
POWER SUPPLY
CABLE GLAND PG11
4X 14

( 75)
89
FLANGE ISO PN10 DN20 ( 105)

180

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
6/8/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY GLOBE VALVE DN20 PN10 BRASS PNEUMATIC 24V A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-6001-003
A. GKINOSATIS TAG: CWS SCALE: 1:2 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 74
 6 5 4 3 2 1

D 2 D
1

C C

2 2 102-2003-005 FLANGED NECK DN25 PN10 85MM

1 1 102-6001-006 GLOBE VALVE DN25 THREADED BRASS PNEUMATIC
24V
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
6/8/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY GLOBE VALVE DN25 PN10 BRASS PNEUMATIC 24V A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-6001-005
A. GKINOSATIS TAG: PRV SCALE: 1 / 2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 75
 6 5 4 3 2 1
NOTES
1. CONNECTION STANDART ISO PN10
2. ALL GASKETS TO BE NON-ASBESTOS TYPE
D 98 D
43 60

AIR SUPPLY
8 COPPER TUBE
105

42

C POWER SUPPLY
C
CABLE GLAND PG11

8X ( 14)

2X ( 85)
FLANGE ISO PN10 DN25
117 2X ( 115)

235

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
6/8/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY GLOBE VALVE DN25 PN10 BRASS PNEUMATIC 24V A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-6001-005
A. GKINOSATIS TAG: PRV SCALE: 1:2 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 76
 6 5 4 3 2 1
NOTE:
1.ELECTRICAL CONNECTION: FOR ROUND PLUG CONNECTOR M12X1, 4 POLE
2.PROTECTION CLASS: IP67
D 3.ANALOGUE OUTPUT 4...20mA D
4.OPERATION PRESSURE: 100 BAR
5.OPERATION TEMPERATURE: 0...70 C
5.CONNECTION STANDARD WITH PIPE: ISO 4144 HALF SOKECKET S1 [1/2]
6.WEIGHT:0.2 KG
M12x1 - 6g
9

16

C C

SW27
27AF
(123)

(45)
B INSERTION
LENGHT DESCRIPTION COMMENTS
B
34
24 BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
6.5 VESSEL SHIPYARD
17 323/329
[G 1/2-14 - A] PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
31 (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
20/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
4 POLES ALL DIMENSIONS ARE IN MILLIMETERS
DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOW SWITCH DIGITAL 24V A
FIRST ANGLE PROJECTION
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-5003-001
A. GKINOSATIS TAG: FS SCALE: 1 : 1 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 77
 6 5 4 3 2 1
NOTE: REVISION HISTORY
REV DESCRIPTION REVISED BY DATE APPROVED BY
1.CONNECTION STANDARD WITH PIPE: HALF COUPLING, THDF, ISO 7-1, CS [1/2]
ADDITON OF COMPONENT 101-5004-012 &
2.PROTECTION CLASS: IP65 1 A.PINTER 17/2/2020 A.GKINOSATIS
REVISED NOTES.
D 3.ITEM 7. PROTECT THE PRESSURE MEASURING INSTRUMENT FROM
PRESSURE SURGES AND PULSATIONS.
D

3
4
2
7
1
5
C 6
C
7 1 101-5004-012 SNUBBER FOR PRESSURE GAUGES 1/2 MALE X 1/2
FEMALE SS316
ADJUSMENT SCREW 6 1 101-6002-004 BALL VALVE DN15 THREADED MALE-G/MALE-G BRASS
5 1 101-5004-003 PRESSURE TRANSMITTER 0-10bar
CABLE CONNECTION 4 2 101-9005-006 REDUCER 1/2 TO 1/4 TAPER
CABLE GLAND PG9 3 1 101-5004-001 PRESSURE GAUGE 0-10 bar
81 2 1 101-9005-009 PLUG 1/2 MALE WITH NBR RING ALLEN HEAD
1 1 101-9005-003 CROSS 1/2 FEMALE EQUAL
B 35
152
186
ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
17 [BSP 1/2] UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
142 35 (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION

155 25/9/2019 WITHOUT WRITTEN PERMISSION FROM

ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
190 GENERAL TOLERANCES PER ISO2768-m-K
DESCRIPTION
A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PRESSURE SENSOR MODULE 0-10bar A
44 FIRST ANGLE PROJECTION L.XAGORARIS
31 SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5004-001 1
A. GKINOSATIS TAG: PIT SCALE: 1 / 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 78
 6 5 4 3 2 1

D 5
D
4
3
2

C 85
C
195
161
5 1 101-5004-001
PRESSURE GAUGE 0-10 bar
4 1 101-9005-006
REDUCER 1/2 TO 1/4 TAPER
3 1 101-9005-009
PLUG 1/2 MALE WITH NBR RING ALLEN HEAD
2 1 101-9005-005
TEE 1/2 OFFSET MALE
1 1 101-6002-003
BALL VALVE DN15 THREADED MALE-R/FEMALE-Rp
20 CONNECTION TYPE BRASS
B THREADED [1/2] 37
ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
67 BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PRESSURE INDICATOR MODULE 0 TO 10 BAR A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5004-007
A. GKINOSATIS TAG: PI SCALE: 1 / 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 79
 6 5 4 3 2 1
NOTE:
1.CONNECTION STANDARD WITH PIPE: ISO 4144 HALF SOKECKET S1 [1/2]
2.PROTECTION CLASS: IP65
D 3.MEASURING RANGE LIMITS: -50 C OT 260 C 1 D
4.OPERATING TEMPERATURE RANGE: -40 C TO 85 C
5.OUTPUT SIGNAL: 4...20mA

50
2
40
CABLE CONNECTION
CABLE GLAND M20X1.5

45

C C
(162)
150
105 117
73
(INSERTION 20 60
LENGHT)

14 [R 1/2 - 14] 2 1 101-5005-003 THERMOWELL SS316 M=100 12, 1/2

9 1 1 101-5005-001 TEMPERATURE SENSOR 0-100C
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
35
VESSEL SHIPYARD
27 323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
28 UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
47 (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
23/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TEMPERATURE SENSOR MODULE 0-100C A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5005-001
A. GKINOSATIS TAG: T SCALE: 1 : 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 80
 6 5 4 3 2 1
NOTES REVISION HISTORY
REV DESCRIPTION REVISED BY DATE APPROVED BY
1.CONNECTION STANDARD ISO PN10
1 ADDITION INSTALLATION DETAIL A.PINTER 24/2/2020 A.GKINOSATIS
2.ALL GASKETS TO BE NON-ASBESTOS TYPE
D 3.MEASURING RANGE: 0-2000 mS/cm D
4.PROCESS TEMPERATURE: -20 C TO 130 C
5.PROCESS TEMPERATURE: MAX. 20 BAR
6.OUTPUT SIGNAL: 4...20mA
7.CONNECTION CABLE: INTEGRAL CONNECTION CABLE IN A VARIETY OF
LENGHTS UP TO 20M.
3

C C
1

3 1 101-5006-003 CONDUCTIVITY SENSOR ANALYZER

2 1 101-5006-002 DRILLED BLANK FLANGE ISO DN65 PN10
1 1 101-5006-001 CONDUCTIVITY SENSOR 0-2000mS-cm
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
2 FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY SALINITY MEASURING MODULE 0-40PSU A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5006-001 1
A. GKINOSATIS TAG: SMD SCALE: 1:5 SHEET 1/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 81
 6 5 4 3 2 1

D D
[R 3/4 - 14]

A A

NUT WITH 19
[G 3/4] THREAD
(20)
2
32
C C
SEALING VITON
81 GASKET 40 1
103
124
INSTALLATION DETAIL
1 50

FLOW DIRECTION
16
47
27
B 40
DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
22.5 UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
8X ( 18) DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
( 185) GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A ( 145)
DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY SALINITY MEASURING MODULE 0-40PSU A
FIRST ANGLE PROJECTION L.XAGORARIS
SECTION A-A APPROVED BY
SIZE
A3
DOCUMENT ID
102-5006-001 1
REV.

SCALE 1:2 A. GKINOSATIS TAG: SMD SCALE: 1:2 SHEET 2/3

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 82
 6 5 4 3 2 1

D 167
D
144
13 32 80 4X 5 17.1
M6x1 - 6H
32

144 80
172
C C
224
200

100
40 85
CABLE GLAND
3X M20X1.5 67 50 15 4X 10
94

3 50
B 22
27 DESCRIPTION
85 COMMENTS
B
100
71 BILL OF
92 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY CONDUCTIVITY SENSOR ANALYZER A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-5006-003 1
A. GKINOSATIS TAG: SCALE: 1 / 2 SHEET 3/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 83
 6 5 4 3 2 1
NOTES
1.CONNECTION STANDART ISO PN10
2.ALL GASKETS TO BE NON-ASBESTOS TYPE
D 3,CONTROL AIR PRESSURE: 0.69-8.6 BAR D
4.PUMP MATERIAL: POLYPROPELENE
5.WEIGHT: 4KG
1

C 5 C
OUTLET

5 1 102-7002-004 PNEUMATIC DIAPHRAGM PUMP OUTLET SPOOL DN15

PN10
4 1 102-7002-003 PNEUMATIC DIAPHRAGM PUMP INLET SPOOL DN15
PN10
4 3 4 101-7002-002 ANTI-VIBRATION PAD M6
2 1 101-9005-007 STRAIGHT D10 TO 1/4 MALE FOR COPPER PIPE
2 1 1 101-7002-001 PNEUMATIC DIAPHRAGM PUMP 8LT/MIN 3,5BAR
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
3 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
INLET (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
14/10/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PNEUMATIC DIAPHRAGM PUMP PN10 A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-7002-001
A. GKINOSATIS TAG: DAP SCALE: 1 / 2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 84
 6 5 4 3 2 1
99
50 117
D D
81

4X M6x1 - 6g
346
A
221
77

(14) 4X ( 14)
C 135
( 95) C
AIR CONNECTION ( 65)
10 COPPER TUBE
49 (135) 45

25 147
20
65 45
21
45 A
25.5 33
83 SECTION A-A
B
164 173
SCALE 1 / 5 B
DESCRIPTION ISO PN10 DN15 COMMENTS
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
14/10/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PNEUMATIC DIAPHRAGM PUMP PN10 A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-7002-001
A. GKINOSATIS TAG: DAP SCALE: 1 / 5 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 85
 6 5 4 3 2 1
NOTES:
1.STANDARD CONNECTION WITH STRAIGHT ADAPTORS 10 COPPER TUBE
2. POWER SUPPLY: 24V DC
4 2
D CABLE CONNECTION
CABLE GLAND PG11
D
91 50

3
29
A 5
78
62
39 43
2
66
171
161
119
1
C 12 93 C

101 30
151
4 1
101-9001-001 AIR REGULATOR FILTER DN8
66 52 47 202 3 1
102-6004-001 SOLENOID VALVE 2/2 NC DN8 THREADED BRASS
PNEUMATIC 24V
2 2 101-9005-007 STRAIGHT D10 TO 1/4 MALE FOR COPPER PIPE
1 1 101-9005-008 NIPPLE 1/4 HEXAGON GALVANISED
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
2X R
6 BILL OF MATERIAL
BILL OF
DETAIL A DRAWING STATUS
FOR APPROVAL
PROJECT NR.
002-003247/002-003248
SCALE 1 : 1 VESSEL SHIPYARD
205 323/329
154
PROJECT DETAILS
104 UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
52 (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
26/9/2019 WITHOUT WRITTEN PERMISSION FROM
13 ALL DIMENSIONS ARE IN MILLIMETERS ERMAFIRST. THIS DOCUMENT SHALL NOT
BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
30 GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A 62
DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PNEUMATIC DIAPHRAGM PUMP CONTROL MODULE A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-7002-002
A. GKINOSATIS TAG: PCM SCALE: 1 / 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 86
 6 5 4 3 2 1
127
115 25 83
ENCLOSURE
57 9 S-MS3 AC
D 22 22
D

40

91 108

190
2X 7 80

24
C 10 74 HYDROGEN SENSOR HEAD
C
54 S4003H2
48

10

145
WEIGHT: 2.5 Kg
6 OUTPUT: 4-20mA
B DEGREE OF PROTECTION: IP65
OPERATED TEMPERATURE: -30 C TO +50 C
DESCRIPTION COMMENTS
B
NOT PORTABLE
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
109 VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
24/4/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K L. XAGORARIS
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FIXED HYDROGEN SENSOR 0-100% LEL A
FIRST ANGLE PROJECTION A. GKINOSATIS
NOTES: SIZE DOCUMENT ID REV.
1. H2 SENSOR TO BE INSTALLED CLOSE TO THE ELECTROLYTIC APPROVED BY A3 101-5007-006
CELLS AT THE HIGHEST POINT IN THE ER LEVEL.
A. GKINOSATIS TAG: H2 SCALE: 1 / 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 87
 6 5 4 3 2 1

D OUTLET
741 60 D
105 ISO PN10 DN50 4x( 16)

( 145)

A A 340 370
( 185)
240
16

222
300 120
C C
240
312 248 181
NOTE:
LIFTING LUG
1. CONNECTION STANDART INLET ISO PN10 DN65 - OUTLET ISO PN10 DN50
( 125) 2. ALL GASKETS TO BE NON-ASBESTOS TYPE
3. PUMP TECHNICAL SPECIFICATIONS:
FLOW CAPACITY: 14M3/H
291 4x( 16) PUMP TOTAL HEAD CAPACITY: 35M
4. MOTOR TECHNICAL SPECIFICATIONS:
POWER: 5.5kW
VOLTAGE: 380V-III
FREQUENCY: 50Hz
RPM: 2900
LIFTING LUG IP DEGREE: IP55
RATED IN: 10.5 A
B 281 5. FULLY SECURE PUMP MOTOR MOUNTING PLATE BY BOLTING ALL AVAILABLE HOLES
DESCRIPTION COMMENTS
B
BILL OF
354 DRAWING STATUS PROJECT NR.
56 FOR APPROVAL 002-003247/002-003248
21
VESSEL SHIPYARD
R7 14 323/329
PROJECT DETAILS
240 190 R7 RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
14 UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
21/6/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K
A SECTION A-A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY CENTRIFUGAL SELF PRIMING PUMP 14M3/H 35M
380V/50Hz
A
FIRST ANGLE PROJECTION
SCALE 1/7,5 APPROVED BY
SIZE
A3
DOCUMENT ID
101-7001-137
REV.

A. GKINOSATIS TAG: SCALE: 1/7,5 SHEET 1/1

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 88
 6 5 4 3 2 1
NOTE:
1. POWER 440V AC
2. IP54 CLASS
3. COLOR RAL(6034)
4. WEIGHT: KG
D (400) D
350 202

C (400) 439 475 C

102
60 42

72
234
B 240
125
263 DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
25 FOR APPROVAL 002-003247/002-003248
4X 9 VESSEL SHIPYARD
19.5 323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
27/5/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS
DETAIL A DIMENSIONS IN BRACKETS ARE IN INCHES
GENERAL TOLERANCES PER ISO2768-m-K
DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
DESCRIPTION
A.PINTER
A SCALE 1:2 DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY PUMP STARTER PANEL 440V 6-10A A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-8003-009
A. GKINOSATIS TAG: PSP SCALE: 1 / 5 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 89
 6 5 4 3 2 1
NOTE:
1.CONNECTION STANDARD WITH PIPE: ISO 4144 HALF SOKECKET S1 [1/2]
2.PROTECTION CLASS: IP67
1
D 3.MEASURING RANGE LIMITS: 20 C OT 60 C D
4.AMBIENT TEMPERATURE: -40 C TO 70 C
5.WEIGHT: 0.76 KG

62
33 12 116

2
CABLE CONNECTION
C 84 CABLE GLAND PG13.5 C

166
148
132 2 1 101-5005-005 METAL SOCKET 110MM FOR TEMPERATURE SWITCH
111
98 (INSERTION 1 1 101-5005-004 TEMPERATURE SWITCH 20-60C
B LENGHT)
ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
15
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
41 85 VESSEL SHIPYARD
323/329
[G 1/2-14 - A]
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
23/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TEMPERATURE SWITCH MODULE 20-60C A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5005-002
A. GKINOSATIS TAG: TS SCALE: 1 / 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 90
 6 5 4 3 2 1
NOTE:
1. NOMINAL PRESSURE MAX.: 40 BAR
2. IP CLASS: 65
D 335 D
211
177
A
149 4X M12x1.5 - 6H 15
122
92
8
65
141
92 (P.C.D)
C 80 67
C
45
17 45
30
CABLE COONECTION
SECTION A-A
CABLE GLAND M20X1.5
SCALE 1 / 2.5
3 1 101-5008-003 COUNTER FLANGE FOR FLOAT LEVEL SWITCH
1
2 1 101-5008-002 COUNTER FLANGE GASKET & BOLTS FOR FLOAT
LEVEL SWITCH
1 1 101-5008-001 FLOAT LEVEL SWITCH
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
3
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
2 RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
23/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY FLOAT LEVEL SWITCH MODULE A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5008-001
A. GKINOSATIS TAG: LS SCALE: 1:2.5 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 91
 6 5 4 3 2 1
REVISION HISTORY
REV DESCRIPTION REVISED BY DATE APPROVED BY
ADDITION OF OPTIONAL SIGNAL INDICATION
1 A.PINTER 4/12/2020 N.VASILAKOPOULOS
FOR AMS FOR DNV CASES
D D

1 2
C C

5 4 101-8000-040 WALL FIXING LUGS M6-M8 250kg

4 4 101-9002-044 POLYMADE GLAND NUT PG16
3 4 101-9002-043 POLYMADE GLAND NUT PG13.5
2 4 101-9002-002 POLYAMIDE CABLE GLAND PG16-9/14-22.3
1 4 101-9002-001 POLYAMIDE CABLE GLAND PG13.5-6/12-20.2
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/2/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRIP UNIT 24V DNV-GL METALLIC STANDARD A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-8005-016 1
A. GKINOSATIS TAG: SCALE: 1 / 5 SHEET 1/4
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 92
 6 5 4 3 2 1
NOTE:
WEIGHT: APPROX. 10 KG

D D
217 466
3 148
400 15
202 350
148 400

(157.5)=3X 52.5 300 339 375 300

228
C C
52.5

4X 9 DOOR OPEN

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/2/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRIP UNIT 24V DNV-GL METALLIC STANDARD A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-8005-016 1
A. GKINOSATIS TAG: SCALE: 1 / 5 SHEET 2/4
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 93
 6 5 4 3 2 1
X1 Q (2p)
+ 2 1
_ 2
4 3
1
D 24V DC
2A
1 X2.3 14 D
2 Amplifier Splitter
X2.9
Splitter
PS
X1.5 X2.1
C X2.5 11

11 21 18 11 X2.4
14 X2.8 TRIP BWTS
X3.1 TS K2
KT AMPLIFIER Run (NC)
K3 K3 K1 Signal
X3.3 (NO) 1.1. (H2)
12
(NC) X1.3 12
15
22 12 X2.7
X3.2 T/R X1.6 X2.2
D X2.6 Wrong
C Operation
Signal
C
X1.4
KT
T/Rs' circuit breaker A1 A1 A1 (180sec) A1
K1 TRIP (cut off) relay K3 K1 K2
K2 Relay X2.11 Amplifier Splitter
A2 A2 A2 A2
Delay relay (180 sec). 2 15
T/Rs' circuit breaker
KT
TRIP (cut off) relay.
T/Rs' circuit breaker
B K3 TRIP (cut off) relay
B
(Hydrogen Sensor)

A DESCRIPTION
TRIP UNIT FOR T/R BREAKER
A
SIZE DOCUMENT ID REV.
A3 102-8005-016
01
TAG: SCALE: SHEET 3/4

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 94
 6 5 4 3 2 1
DNV optional
Alarm
01 signal to

D vessel's
AMS D
Logic diagram
D Hydrogen sensor (H2.1)
in alarm condition

Α Pressure Switch (PS) in

alarm condition
>5bar

Temperature TRIP (cut

BWTS Run
C Β Ballasting
Signal
Switch (TS) in
"High Alarm Condition"
>40°C
Timer Relay
t =180sec
off) T/Rs'
circuit
breaker
C

T/R wrong
C operation signal

B SYSTEM Wrong
CONTACTS CONDITION DURING OPERATION (UNDER 24VDC) B
CONDITIONS BWTS H2 trip
K1 Operation K2 KT PS TS K3
Run Signal amplifier
Signal
Normal BWTS
operation
O C O O O C C C O

Trip due to PS C C O O O O C C O C: Close position

O: Open position
(180sec)
Trip due to TS O C C O C O C O
C
Trip due to T/R
wrong operation C O O O O C C C O
signal

Trip due to H2
critical alarm
O O O O O C C O C

A DESCRIPTION
TRIP UNIT FOR T/R BREAKER
A
SIZE DOCUMENT ID REV.
A3 102-8005-016
01
TAG: SCALE: SHEET 4/4

6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 95
 6 5 4 3 2 1

D D
4
3
2

C 85
C
195
161
5 1 101-5004-002
PRESSURE GAUGE -1+5 bar
4 1 101-9005-006
REDUCER 1/2 TO 1/4 TAPER
3 1 101-9005-009
PLUG 1/2 MALE WITH NBR RING ALLEN HEAD
2 1 101-9005-005
TEE 1/2 OFFSET MALE
1 1 101-6002-003
BALL VALVE DN15 THREADED MALE-R/FEMALE-Rp
CONNECTION TYPE BRASS
B 20 THREADED [1/2] 37
ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
67 BILL OF MATERIAL
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/9/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY VACUUM PRESSURE INDICATOR MODULE -1 TO 5
BAR
A
FIRST ANGLE PROJECTION L.XAGORARIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-5004-008
A. GKINOSATIS TAG: VPI SCALE: 1 / 2 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 96
 6 5 4 3 2 1
NOTE:
1.POWER 440V AC
2.CLASS: IP54
3.COLOR RAL6034
4.WEIGHT: APPROX 17.5KG
D D
346
300 300 250
A 4X 10.3

400 350

C C
115

B MAINTENANCE SPACE 102

80
A
185 105
152 VIEW A-A
191 SCALE 1 / 5
B 163 DESCRIPTION COMMENTS
B
116
BILL OF
69 DRAWING STATUS PROJECT NR.
22
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
46 UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
12/12/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
16 DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
9 DESCRIPTION
A DETAIL B 2X R GENERAL TOLERANCES PER ISO2768-m-K
DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009
A.PINTER
CHECKED BY MOTOR STARTER 440V A
SCALE 1:2 FIRST ANGLE PROJECTION A.PINTER
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-8003-017
A. GKINOSATIS TAG: MS SCALE: 1 / 5 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 97
603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

Part drawings

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 98
603-09-3247 Equipment Operation & Technical manual –Vol II Rev. -
002-09-0007 OMSM Template rev.06
11/2/2021 HN 323/329

TRO SAMPLING PORT MEDIUM PN10 24V 103-2001-006

[102-2001-006]
TRO SAMPLING PORT SMALL PN10 24V
103-2001-005
[102-2001-005]

INJECTION PORT MEDIUM DN15 PN10 24V 103-2001-016

[102-2001-016]
INJECTION PORT SMALL DN15 PN10 24V
103-2001-015
[102-2001-015]

NEUTRALIZING UNIT FOR BWTS FIT200-400 ISO PN10NEUTRALIZING AGENT TANK 102-2000-052
200LT FOR FIT200-400 [102-2000-052]
NEUTRALIZING UNIT CONNECTION SPOOL DN15 PN10 SS316 / NEUTRAL 103-2002-018
102-2003-008

G2 SAMPLING PORT MEDIUM DN25 PN10 103-2001-024

[102-2001-024]

TRO RETURN PORT PN10 103-2001-010

[102-2001-010]

© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 99
 6 5 4 3 2 1

D D
5

4
3

2
C C

5 1 102-2003-001 FLANGED NECK DN15 PN10 63MM SS316

4 1 101-9005-117 NIPPLE HEXAGON 1/2 SS316
3 1 102-6001-002 GLOBE VALVE DN15 THREADED BRASS PNEUMATIC
24V
1
2 1 101-6002-002 BALL VALVE DN15 THREADED FULL BORE SS316
MANUAL
1 1 102-2001-011 INJECTION SPOOL SMALL DN15 PN10 SS316
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF
BILL OF MATERIAL
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
16/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY INJECTION PORT SMALL DN15 PN10 24V A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2001-015
A. GKINOSATIS TAG: BIS-S SCALE: 1:2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 100
 6 5 4 3 2 1
NOTES
1.CONNECTION STANDART ISO PN10 POWER SUPPLY
2.ALL GASKETS TO BE NON-ASBESTOS TYPE CABLE GLAND PG11
D D

85
37
96 47
DETAIL B
81 A
124
SCALE 1:1 INSTALLLATION DETAIL

78 FLANGED NECK
ISO PN10 DN50
C B C
BALLAST PIPING
142 436 AIR SUPPLY
8 COPPER TUBE A
ISO PN10 DN50

115 25

BALLAST PIPE SIZE DIM A

FLOW DIRECTION DETAIL A DN80 109
B SCALE 1:1 DESCRIPTION DN100 109
COMMENTS
B
( 165) ( 125) BILL OF DN125 123
DRAWING STATUS PROJECT NR.
4X ( 18) FOR APPROVAL 002-003247/002-003248
4X ( 14)
VESSEL SHIPYARD
323/329
( 65)
( 95) PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
45
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
16/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY INJECTION PORT SMALL DN15 PN10 24V A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2001-015
A. GKINOSATIS TAG: BIS-S SCALE: 1:5 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 101
 8 7 6 5 4 3 2 1
NOTES:
1. CONNECTION STANDART ISO PN10
2. ALL GASKETS TO BE NON-ASBESTOS TYPE
3. THIS IS THE STANDARD VERSION OF THE NEUTRALIZING UNIT FOR BWTS SYSTEMS FIT200-400
F 4.
WITH THE RESPECTIVE CONFIGURATIONS FOR DOSING PUMP DDA30.
ALWAYS PLACE ON THE SAME SIDE THE MOTOR STARTER AND NEUTRALIZING UNIT SPOOL.
F
5. 102-2002-018 SPILL CONTAINMENT TANK 335LT STRUCTURE TO BE PAINTED USING RAL 6034
6. 102-2002-018 SPILL CONTAINMENT TANK 335LT NOT ERMAFIRST STANDARD SCOPE OF SUPPLY
7. FOR THE NAT SPOOL CONNECTION COUNTER FLANGE IS PROVIDED. REFER DWG. 102-2003-008
NEUTRALIZING UNIT CONNECTION SPOOL DN15 PN10 SS316.

1
7
6
E IMPORTANT NOTE: E
FOR SUCCESSFUL NEUTRALIZATION PLEASE
MAKE SURE THAT YOU FOLLOW
THE CORRECT MIXING RATIO

WATER FILLING
STICKER 2

3
D D
4 DETAIL A
SCALE 1:2

C 7
6
1
1
101-7003-001
102-2000-051
DOSING PUMP 30LT/H 40M C
PVC PUMP DISCHARGE PIPE DN25 ASSEMBLY
5 1 102-2002-019 SPILL CONTAINMENT TANK 335LT
5 4 1 101-6002-001 BALL VALVE DN25 THREADED FULL BORE BRASS
MANUAL
3 1 101-8003-007 MOTOR STARTER 440V
2 1 102-2003-008 NEUTRALIZING UNIT CONNECTION SPOOL DN15
PN10 SS316
1 1 102-2002-018 NEUTRALIZING AGENT TANK 200LT FOR FIT200-400
ITEM QTY PART NUMBER DESCRIPTION COMMENTS
B DESCRIPTION
BILL OF
OF MATERIAL
COMMENTS
B
BILL
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
20/3/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
DIMENSIONING AND TOLERANSING AS
A PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING UNIT FOR BWTS FIT200-400 ISO
PN10 A
FIRST ANGLE PROJECTION A. GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A2 102-2000-052 1
A. GKINOSATIS TAG: SCALE: 1:10 SHEET 1/3
8 7 6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 102
 8 7 6 5 4 3 2 1

F F

296
329 296

E 4X 30 343 E
50

1148 808 1132

946 946
793 789
653 623
D 203 D
343
87
33

140 140
190 536
436
676 361 65 676
676 726
876 947

C C
( 65) ( 95)

794 4X ( 14)

DETAIL D
4X 22
22
20
SCALE 1 / 5
B B DESCRIPTION COMMENTS
B
BILL OF
296 DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
WATER FILLING HOSE VESSEL SHIPYARD
323/329
DETAIL B 966
PROJECT DETAILS
SCALE 1:2 UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
273 20/3/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
290 ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
DIMENSIONING AND TOLERANSING AS
A PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING UNIT FOR BWTS FIT200-400 ISO
PN10 A
FIRST ANGLE PROJECTION A. GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A2 102-2000-052 1
A. GKINOSATIS TAG: SCALE: 1:10 SHEET 2/3
8 7 6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 103
 8 7 6 5 4 3 2 1

F F

LIFTING LUG

CABLE WAY AROUND

THE NEUTRALIZING UNIT

E E
C

D D
SPILL TANK DRAIN VALVE DN25
CABLE WAY FOR THE POWER SUPPLY OF THE
MOTOR STARTER AND BETWEEN THE CABLES OF
THE DOSING PUMP AND MOTOR STARTER

C C

SEE NOTE 7.

PURGING DRAIN PORT

WITH COMPRESSED AIR
DETAIL C
SCALE 1:5
B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
600 323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
20/3/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
REQUESTED SPACE FOR THE FILLING OF GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
DIMENSIONING AND TOLERANSING AS
A 670
NEUTRALIZING TANK 200LT WITH BISULPHITE
& MAINTENANCE SPACE MS/DP PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING UNIT FOR BWTS FIT200-400 ISO
PN10 A
FIRST ANGLE PROJECTION A. GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A2 102-2000-052 1
A. GKINOSATIS TAG: SCALE: 1:10 SHEET 3/3
8 7 6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 104
 8 7 6 5 4 3 2 1

F F

1 2

E E

6
3
D D

C C
6 1 102-2000-050 PVC PUMP SUNCTION PIPE ASSEMBLY
5 1 101-2002-004 LMDPE TANK 600LT
4 1 102-2000-048 PVC NEUTRALIZIN TANK FRESH WATER FILLING
ASSEMBLY DRAWING
3 1 102-2000-045 PVC NEUTRALIZING TANK VENT ASSEMBLY
2 1 101-5008-010 FLOAT LEVEL SWITCH L=640MM
1 1 101-2002-003 MIXING DEVICE PVC SHAFT 800mm
ITEM QTY PART NUMBER DESCRIPTION COMMENTS
B BILL
DESCRIPTION
OF MATERIAL
COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
23/3/2020 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
DIMENSIONING AND TOLERANSING AS
A PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING AGENT TANK 200LT FOR FIT200-400 A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A2 102-2002-018
A. GKINOSATIS TAG: SCALE: 1:5 SHEET 1/2
8 7 6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 105
 8 7 6 5 4 3 2 1

F F

250

FLEXIBLE HOSE CONNECTION

FOR FRESH WATER FILLING

E E

1105 A

866 896
780

D D
160

99
328
600

C C
63
120

22 20

65
220 250
DETAIL B DETAIL A
B SCALE 1 / 4 DESCRIPTION
SCALE 1:3 COMMENTS B
BILL OF
DRAWING STATUS PROJECT NR.
220
C FOR APPROVAL 002-003247/002-003248
76 VESSEL SHIPYARD
4X 6.5 323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO ERMA FIRST
DETAIL C 63
ALL DIMENSIONS ARE IN MILLIMETERS
23/3/2020
OTHERS OR USED FOR ANY PURPOSE
WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
BE DUPLICATED IN WHOLE OR IN PART.
THE ESSENTIAL BALLAST SOLUTION

SCALE 1 / 2 15.5 DIMENSIONS IN BRACKETS ARE IN INCHES

GENERAL TOLERANCES PER ISO2768-m-K
DESIGNED BY
A.PINTER
DESCRIPTION
DIMENSIONING AND TOLERANSING AS
A PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING AGENT TANK 200LT FOR FIT200-400 A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A2 102-2002-018
A. GKINOSATIS TAG: SCALE: 1:8 SHEET 2/2
8 7 6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 106
 6 5 4 3 2 1
NOTE: REVISION HISTORY
1. CONNECTION STANDART ISO PN10
2. ALL GASKETS TO BE NON-ASBESTOS TYPE REV DESCRIPTION REVISED BY DATE APPROVED BY
3. ITEM 8. COUNTER FLANGE PROVIDED IN STANDARD SCOPE OF SUPPLY. REVISED MODEL: REMOVED HEXAGON NIPPLES
1/2 & REDUCING SLEEVE 1/2 TO 1 AND
1 A.PINTER 10/09/2018 A.GKINOSATIS
D REPLACE TEE 1/2 FEMALE TO TEE OFFSET
1/2 MALE & CHANGED VALVE ORIENTATION
D
1.REPLACE 101-9005-005 TEE 1/2 OFFSET
MALE WITH 101-9005-003 CROSS 1/2 FEMALE
2 EQUAL A.PINTER 15/5/2020 A.GKINOSATIS
8 2. ADDED 101-9005-009 PLUG 1/2 &
1 101-6002-BALL VALVE DN15
2

3
8 1 101-9005-176 ISO 7005-1 PLATE FLANGE FLAT FACE PN10 DN15
C 5 SS316 C
7 1 101-9005-009 PLUG 1/2 MALE WITH NBR RING ALLEN HEAD
4
6 1 101-6002-003 BALL VALVE DN15 THREADED MALE-R/FEMALE-Rp
BRASS
2
5 1 101-9005-003 CROSS 1/2 FEMALE EQUAL
4 1 101-6002-002 BALL VALVE DN15 THREADED FULL BORE SS316
6
MANUAL
3 1 101-9005-006 REDUCER 1/2 TO 1/4 TAPER
2 1 101-5004-001 PRESSURE GAUGE 0-10 bar
7
1 1 102-2003-016 FLANGED NECK DN15 PN10 100MM SS316
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF
BILL OF MATERIAL
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING UNIT CONNECTION SPOOL DN15
PN10 SS316
A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2003-008 1
A. GKINOSATIS TAG: NATS SCALE: 1:2 SHEET 1/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 107
 6 5 4 3 2 1
NOTES
1.CONNECTION STANDART ISO PN10
2.ALL GASKETS TO BE NON-ASBESTOS TYPE
D D
117

103 PRESSURE GAUGE 0-10 bar

4X ( 14)
81
C 2 C

ISO PN10 DN15

( 95)
( 65)

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY NEUTRALIZING UNIT CONNECTION SPOOL DN15
PN10 SS316
A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2003-008 1
A. GKINOSATIS TAG: NATS SCALE: 1:2 SHEET 2/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 108
 6 5 4 3 2 1

D D
(14)

( 95)
( 65)

C C

4X ( 14)

B DESCRIPTION COMMENTS
B
BILL OF
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
25/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY ISO 7005-1 PLATE FLANGE FLAT FACE PN10 DN15
SS316
A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 101-9005-176 1
A. GKINOSATIS TAG: SCALE: 1 : 1 SHEET 3/3
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 109
 6 5 4 3 2 1

D D

C C

3 1
2 1 101-6002-001 BALL VALVE DN25 THREADED FULL BORE BRASS
MANUAL
1 1 102-2001-020 G2S SPOOL MEDIUM DN25
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF
BILL OF MATERIAL
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
16/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY G2S PORT MEDIUM DN25 A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2001-024
A. GKINOSATIS TAG: G2S-M SCALE: 1:2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 110
 6 5 4 3 2 1
NOTES
1.CONNECTION STANDART ISO PN10
2.ALL GASKETS TO BE NON-ASBESTOS TYPE
D D
76 55

108

INSTALLLATION DETAIL
125
ISO PN10 DN50
C 471
FLANGED NECK
ISO PN10 DN50 C
BALLAST PIPING
A
201

B DESCRIPTION
BALLAST PIPE SIZE
COMMENTS
DIM A B
BILL OF DN150-DN250 195
DRAWING STATUS PROJECT NR.
( 125) 4X ( 18) FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
( 165) UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
45 16/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY G2S PORT MEDIUM DN25 A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2001-024
A. GKINOSATIS TAG: G2S-M SCALE: 1 / 5 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 111
 6 5 4 3 2 1

D D
4

3 5

C 2 C

1
5 1 101-9005-013 NIPPLE HEXAGON 1/2
4 1 102-2003-003 FLANGED NECK DN15 PN10 63MM
3 1 101-6005-001 CHECK VALVE SPRING LOADED DN15 THREADED
BRASS
2 1 101-6001-004 GLOBE VALVE DN15 THREADED BRASS MANUAL
1 1 102-2001-009 TRO R SPOOL PN10
B ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
BILL OF
BILL OF MATERIAL
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
323/329
PROJECT DETAILS
RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION
17/7/2018 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRO RETURN PORT PN10 A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2001-010
A. GKINOSATIS TAG: TROR SCALE: 1:2 SHEET 1/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 112
 6 5 4 3 2 1
NOTES
1.CONNECTION STANDART
2.ALL GASKETS TO BE NON-ASBESTOS TYPE
D D

ISO PN10 DN15 79

71

341
63
INSTALLLATION DETAIL
C C
ISO PN10 DN50 FLANGED NECK
108 ISO PN10 DN50

BALLAST PIPING

FLOW DIRECTION
A

OD

B DESCRIPTION
BALLAST PIPE SIZE
COMMENTS
DIM A B
BILL OF DN80 - DN700 OD/2 + 61
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
( 95) VESSEL SHIPYARD
( 165) 323/329

( 125) PROJECT DETAILS

( 65) UNLESS OTHERWISE SPECIFIED RELEASE DATE THIS DRAWING CONTAINS PROPRIETARY
INFORMATION. SUCH INFORMATION SHALL
(DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
4X ( 14) 17/7/2018 WITHOUT WRITTEN PERMISSION FROM
THE ESSENTIAL BALLAST SOLUTION

ALL DIMENSIONS ARE IN MILLIMETERS ERMAFIRST. THIS DOCUMENT SHALL NOT

4X ( 18) DESIGNED BY BE DUPLICATED IN WHOLE OR IN PART.
45 DIMENSIONS IN BRACKETS ARE IN INCHES DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRO RETURN PORT PN10 A
FIRST ANGLE PROJECTION A.GKINOSATIS
SIZE DOCUMENT ID REV.
APPROVED BY A3 102-2001-010
A. GKINOSATIS TAG: TROR SCALE: 1:5 SHEET 2/2
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 113
 6 5 4 3 2 1
REVISION HISTORY
245 REV DESCRIPTION REVISED BY DATE APPROVED BY
610
2X 22 1 ADDITION OF THREADED END CAP AND NOTES A.PINTER 4/12/2019 A.GKINOSATIS

D THREADED CONNECTION [G1/2] FOR TRO2

THREADED CONNECTION [G1/2] FOR TRO1
D
THREADED CONNECTON [G1]
FOR VENT AS PER CLASS REQUIREMENT
LIFTING LUG
398
855 846 815
762
689
[G 1/2-14 - A]

291
225
5 165
C 2
C
402 105
504 504
599 THREADED CONNECTION [G1/2] FOR
367 DISCHARGING TGDT
192 1
82 THREADED END CAP 1/2 1
62 72 NOTE:
162 1. DISCHARGING CONNECTION OF TGDT AND THREADED END CAP 1/2
CAN BE REVERSE ACCORDINGLY
2. WEIGHT: 70KG
380 2 2 101-5008-001 FLOAT LEVEL SWITCH
1 1 102-2002-005 METALLIC RECTANGULAR TANK 150L
B 275
676
ITEM QTY PART NUMBER DESCRIPTION
DESCRIPTION COMMENTS
COMMENTS
B
461 BILL OF
OF MATERIAL
BILL
DRAWING STATUS PROJECT NR.
FOR APPROVAL 002-003247/002-003248
VESSEL SHIPYARD
670 323/329
PROJECT DETAILS
PAINTING SPECS THIS DRAWING CONTAINS PROPRIETARY
UNLESS OTHERWISE SPECIFIED RELEASE DATE INFORMATION. SUCH INFORMATION SHALL
PROCESS THICKNESS (DY-MO-YEAR) NOT BE PUBLISHED OR DISCLOSED TO
OTHERS OR USED FOR ANY PURPOSE ERMA FIRST
THE ESSENTIAL BALLAST SOLUTION

SURFACE PREPARATION SAND BLAST SA 2.5 23/1/2019 WITHOUT WRITTEN PERMISSION FROM
ERMAFIRST. THIS DOCUMENT SHALL NOT
ALL DIMENSIONS ARE IN MILLIMETERS BE DUPLICATED IN WHOLE OR IN PART.
DIMENSIONS IN BRACKETS ARE IN INCHES DESIGNED BY
COATING SYSTEM: DESCRIPTION
GENERAL TOLERANCES PER ISO2768-m-K A.PINTER
A 1 X COAT HEMPEL SHOP PRIMER E 15270 20PM DIMENSIONING AND TOLERANSING AS
PER ASME Y14.5M-2009 CHECKED BY TRO GRAVITY DRAIN TANK 150L A
1 X COAT HEMPADUR MASTIC 45880 120PM FIRST ANGLE PROJECTION S.LADENIS
SIZE DOCUMENT ID REV.
1 X COAT HEMPATHANE TOPCOAT 55610 80PM APPROVED BY A3 102-2002-007-1 1
TOTAL DFT 220PM A. GKINOSATIS TAG: TGDT SCALE: 1:10 SHEET 1/1
6 5 4 3 2 1
© ERMA FIRST ESK ENGINEERING SOLUTIONS SA All rights reserved | Confidential | Pages 114