Alibaba.
com Verified Supplier
Assessment Report Presented to
Hebei Pin Ang International Trade Co., Ltd.
河北品昂国际贸易有限公司
Assessment Report
Report number 165590004_T Assessment Type Trade Assessment
Report date 2024-11-12 Assessor's Name Tony Zhang
The validity Period 2024-11-13 - 2026-11-12 Reviewed by Sam Wang
of Report
Report Verification https://auditedsupplier.sgsgroup.
com.cn
Address
Important Notes
SGS Disclaimer:
This report reflects our findings for the particularly concerned company on the date of our service
only. This report does not discharge or release the factory/sellers/suppliers from their commercial,
legal or contractual obligations with buyers in respect of products provided by the
factory/sellers/suppliers. Any reader other than the party for whom this report has been
specifically issued is hereby informed that the general conditions of service of SGS contain liability
limitation provisions.
Alibaba.com’s Disclaimer:
This report has been independently prepared by a third party verification agency. The report is
provided on an "AS IS" and “AS AVAILABLE” basis. The information contained in the report may
change without notice and no obligation is assumed to update the information after publication.
Alibaba (including its affiliates) is not involved in the preparation of the report. Publishing of the
report by no means means that Alibaba endorses or recommends the report. Therefore, Alibaba
cannot be held responsible for any inaccuracy or omission in the report. To the maximum extent
permitted by law, Alibaba expressly disclaims any warranty, expressed or implied, in regard to the
report, including any implied warranty of merchantability, fitness for a particular purpose or non-
infringement. Your use of or reliance on this report will be at your own discretion and risk. To the
maximum extent permitted by law, in no event shall Alibaba be liable for any party for any direct,
indirect, punitive, incidental, special or consequential damage costs, expenses, legal fees or losses
or any damages whatsoever arising out of or in any way connected with any use of the report even
if advised of the possibility of such damages.
Assessment Report
Company Name
河北品昂国际贸易有限公司
Company Name（English）
Hebei Pin Ang International Trade Co., Ltd.
Gold Supplier ＆ Assessed Company Relationship
Self Owned
Gold Supplier Member ID:
hebeipinang
Company address
F/13, Building 18, Liangjing Mingju, No. 688 Xinhua East Road, Taocheng District, Hengshui City, Hebei Province, Chi
na
Registered address
F/13, Building 18, Liangjing Mingju, No. 688 Xinhua East Road, Taocheng District, Hengshui City, Hebei Province, Chi
na
Business type
trading_company
Company website (URL)
http://hebeipinang.en.alibaba.com
Contact person
Ms. Tina Li
Telephone number
0086-13315819639
Email
[email protected]
certification authority
SGS
Consigner of Assessment
Alibaba
Report number
165590004_T
Report date
2024-11-12
The validity Period of Report
2024-11-13 - 2026-11-12
Assessor's Name
Tony Zhang
Reviewed by
Sam Wang
Report Verification Address
https://auditedsupplier.sgsgroup.com.cn
Company profile
Business License
Date of Incorporation
2018-07-13
The validity Period of Business License
2018-07-13
Company License expiration date
2048-07-12
Annual review conducted by the Industrial ＆ Commercial Bureau?
Yes
Registered capital
3000000 CNY
Business license number
91131102MA0CHGCC9T
Unified Social Credit Code
91131102MA0CHGCC9T
Customs registration No.
91131102MA0CHGCC9T
Corporate representative
Mr. Qunlei Liu
Is it a publicly listed company?
No
Type of site evidential material
Lease Agreement
Company Environment
Floor space (square meters)
750
Organizational structure
Employees distribution
Department Full-time employees Part-Time Employee(s) Total
GM 1 0 1
Financial Dept. 2 0 2
R&D Dept. 2 0 2
Sales Dept. 10 0 10
Logistic Dept. 1 0 1
Number of Full Time Employee
16
Number of part-time employees
Number of all employees
16
Main products
Main product categories
Category Product category
Health & Medical>>Health Care Products>>Health Care Sup
Walker, Underarm Crutch, Commode Chair, Wheelchair
plies>>Rehabilitation Therapy Supplies
Medical devices & Supplies Hospital Bed
Products sold in the last 12 months
Product category Quantity Revenue (USD)
Walker 80,000 Pcs Confidential
Underarm Crutch 100,000 Pairs Confidential
Commode Chair 100,000 Pcs Confidential
Wheelchair 50,000 Pcs Confidential
Hospital Bed 90,000 Pcs Confidential
Annual output (previous year)
Product category Production line capacity (monthly) Actual units produced (previous year)
Confidential Confidential Confidential
Total output (annually)
Confidential
Competitive Advantage of Product Line
Professional sales team provides best service and promotes reply for you
Number of product categories
Number of models
300
Foreign trade experience
Import and export license
Import and Export Enterprise Code
02618139
Export experience (years)
Industry experience (years)
Number of foreign trade employees
10
Trade employee work experience
Over 30 Years
21-30 Years
11-20 Years
6-10 Years
2-5 Years
Less than 2 years
Total revenue (previous year in USD)
Confidential
Total export revenue (previous year in USD)
Confidential
Number of foreign sales agents
N/A
Nearest port
Tianjin Port
Payment terms
FOB, CIF, EXW, CFR, FCA, FAS, CPT, CIP, DAF, DES
Payment methods
L/C, TT, Credit Card, Cash, West Union, MoneyGram, Paypal, Moneybookers
Average lead time (order confirmation to delivery)
Product Category Num Unit
Walker, Underarm Crutch, Commode Chair, Wheelchair 7 days
Hospital Bed 15 days
The Shortest Sample Time
Product Category Num Unit
Walker, Underarm Crutch, Commode Chair, Wheelchair 3 days
Hospital Bed 7 days
Market distribution
Revenue（US Total revenue
Market Product category(s)
D） (%)
Walker, Underarm Crutch, Commode Chair, Whe
North America Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
South America Confidential 30
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Eastern Europe Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Southeast Asia Confidential 25
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Africa Confidential 15
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Oceania Confidential 1
elchair, Hospital Bed
Revenue（US Total revenue
Market Product category(s)
D） (%)
Walker, Underarm Crutch, Commode Chair, Whe
Mid East Confidential 10
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Eastern Asia Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Western Europe Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Central America Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Northern Europe Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
Southern Europe Confidential 1
elchair, Hospital Bed
Walker, Underarm Crutch, Commode Chair, Whe
South Asia Confidential 12
elchair, Hospital Bed
Main clients
Clients name Product category(s) Total revenue(%)
Confidential Confidential Confidential
Main clients types
Brand business, Retailer, Wholesaler, For Private use
Supported languages
Language Listening & speaking Reading & writing
English yes yes
Korean yes yes
R&D capabilities
There is/are ___R＆D engineer(s) in the company.
R&D engineer education
Doctorate
Post-Graduate
Graduate
Junior college
Technical school
High school
R&D engineer work experience
Over 30 Years
21-30 Years
11-20 Years
6-10 Years
2-5 Years
Less than 2 years
Quantity of new products (yearly)
Product category Quantity
Confidential Confidential
Shortest time for new products to be launched
Product category Quantity Unit
Walker, Underarm Crutch, Commode Chair, Wheelchair, Hos
30 days
pital Bed
What design services are provided?
light customization, Customization based on sample, Customization based on graphic design, Customization
What simple customization services are provided?
LogoCustomization, LabelCustomization, PackagingCustomization, ColorCustomization, SizeCustomization, Graph
icCustomization, MaterialReplacement
Design Process
Description Image
What are the equipments that R ＆ D employees are using?
Please list the equipments below Image
Please list the main softwares that are used:
Auto CAD, SolidWorks
Have the designed products been tested by a third-party inspection body?
YES, Only part of designed products have been tested
Does the company has qualification requirements for designers?
YES, with written Job Description
Quality management
How many QA or QC inspectors in total?
Are all production lines have quality control?
Yes
How are finished products inspected?
Random inspection
Testing Machine
Machine Name Brand ＆ model No. Quantity Number of years used Condition Image
N/A
Quality Management Process
Process description Image
Are written instructions available for onsite material inspection/testing? Are the relevant records
maintained?
Yes, with written instructions but no records
Does the enterprise perform inspection on finished products and keep records
Yes
Does the company have any supplier assessment procedure and management?
Yes
Service capabilities
Collaboration with Fortune 500 list of companies
No
Self owned after-sales service countries
N/A
Provide expatriate engineer to provide after-sales service?
N/A
The content of overseas services provided
No
Is it possible to provide expatriate engineer services?
no
Do you have an overseas showroom?
N/A
Have you participated in offline trade shows?
Trade show name Date attended: Country/Region: Images taken at the Trade show
N/A N/A N/A N/A
Does the merchant have the ability to provide buyers with material packages？
Yes
Product category
Health & Medical>>Health Care Products>>Health Care Sup
plies>>Rehabilitation Therapy Supplies
Do you have Project capability ？
No
Do you have flexible customization capability？
Yes
Supply chain capabilities
Cooperation suppliers (total)
10
Suppliers (cooperations more than twice)
10
MOQ for each item
1-10
Small MOQ cases
Product category MOQ (in the last 12 months) Shortest lead time
Walker 1 Pc 3 Days
Do you have an overseas warehouse?
N/A
Large brand agent processing
Product category Big brand name
N/A N/A
Does the merchant support delivery to the buyer's designated Amazon warehouse?
No
After- Sales Guarantee
Do you have a complete after sales service capability?
Yes
Does the enterprise record and follow up customer complaints and feedback
Yes, with a standard feedback form and records
Are there any clear procedures to handle customer complaints?
Yes, with clear procedures and written records
Is there a closed-loop corrective action system in place?
No
Can finished/packaged products be traced by lot identification to the appropriate raw material?
Yes, main raw material can be traced
Is there a product alert and recall procedure?
No
Warranty period
Product category Average Guarantee Number Average warranty unit
Walker, Underarm Crutch, Commode Chair, Wheelchair, Hos
12 months
pital Bed
Industry capabilities
what are the main categories of suppliers in the alibaba international station?
Health & Medical
Is there quality assurance capability? (month)
12
Market sales
country Export volume (USD)
Iraq 90500
