STRUCTURAL DESIGN CALCULATION OF

TREE SCULPTURE

PROJECT COMPANY

DOCUMENT REFERENCE

REVISION DATE
CGC-USW-CAL-ST-0001
04 15-04-25
Response for the comments received on our previous submission (design submittal) ref :SAJ-
P0-CGC-CLC-ST-0048-03

Sl. No. Engineer's Comments USW Response

Refer to the remarks in the comments response sheet Noted.Wind Load revised as per
1
and inside the wind load calculation. comment

Comments marked on calculation

2 To be coordinated with architect and client Noted.

Correcting the mistakes in previous calculation cannot

be considered as the reason for variation. As per IFC,
no section sizes are shown and designing the
3 Noted. To be advised by CGC
structure as per codes and authority regulations is
specialist contractor's responsibility.Hence the
variation claim can't be accepted.

Foundation design and connection design are missing Noted.Foundation and Connection
4
in the document. design included

All flat bar sections revised to 70x15

only the main vertical items as per model (to label in staad as per section sizes available
5
accordingly) in staad and as per market availability
70x16 to be used

Relevant shop drawing and IFC reference to be Shop drawing and IFC reference
6
attached. included

Noted.Foundation and Connection

design revised as per comments on
Ensure Foundation and connection design are
7 previous design and shop drawing
included on these submittal
submittal and included in this
submission
Response for the comments received on our previous submission (design submittal) ref :SAJ-
P0-CGC-CLC-ST-0048-03

Sl. No. Engineer's Comments USW Response

With Cp = 2.0 the wind load increases

to 1.33 kN/m2. Considering the free
spaces between the flatbar sections
please advise we can consider 80%
Cp=2 for sharp edged objects; 1.2 is for circular
8 of the calculated wind load. We have
objects
included 2 options with Cp = 2.0 and
considering reduced wind load for the
open spaces.Kindly review and
advise

provide color coding STAAD model for proper

9 Noted
identification

All flat bar sections revised to 70x15

in staad as per section sizes available
10 only the main vertical items as per STAAD model
in staad and as per market availability
70x16 to be used
*
Design verification for Steel Tree Structure
 INDEX

Sl.No DESCRIPTION

1 DESIGN INFO

2 SHOP DRAWINGS

3 STAAD ANALYSIS FOR TREE SCULPTURE MODEL

4 IDEA STATICA VERIFICATION FOR BASE DETAILS

5 WELD CHECK FOR STEEL SECTIONS

6 FOUNDATION DESIGN
 DESIGN CHECK FOR STRUCTURAL STEEL SUPPORT FOR TREE STRUCTURE

ASSUMPTIONS & DATA

SCOPE

THIS DESIGN CALCULATION IS MADE FOR VERIFICATION OF SUPPORT STEEL FRAME

FOR TREE STRUCTURE

1 DESIGN CODE

Generally all the design has been carried out in accordance with a particular reference to
the following codes of practice.

a) BS 5950-Part 1:2000 - Structural use of steelwork in building

b) BS 6399- Part 1:1996 - Code of practise for dead & imposed loads

c) BS 6399- Part 2:1997 - Code of practise for wind loads

d) BS 8110 ,Part-1 :1997 -Structural use of Concrete

2 MATERIAL

a) Steel sections - Corten Steel - fy = 345N/mm2 ,BS EN S 275 JR(fy = 275N/mm2)

b) Anchor bolts- Fischer Post fixed Anchor bolt Grade 8.8

Elastic properties Modulus of Elasticity = 205000 N/mm 2

BS 5950: cl 3.13
3 STRUCTURE DETAILS

As per site layout details ref : 28-JID-TC-01-L2-D6 HARDSCAPE DETAILS,

design check performed for Tree Sculpture -1 : Size Dia 6300mm x H 4500mm
4 LOADING

Primary Loads acting on the beam:

a) Dead Load (DL)

Self-weight of the structure taken by STAAD

b) Live Load (LL)

Live Load considered in design (as per consultant comment considered = 0.89 kN
as a single point)

c) Wind Load BS 6399 Pt2

Cl 2.1.2
Basic Wind Speed (assuming,based on 3-sec gust wind) = 150.0 kmph
= 41.7 m/sec
Basic hourly wind speed = 41.7 Vb = 23.54 m/sec
(considering gust factor) 1.77
With factors,Sa,Sb,Sc,Sd= 1.0,
Site Wind Speed = Vb xSaxSbxScxSd Vs = 23.54 m/sec
Factor Sb (table 4)
Taking structure height @ 4.5m Sb = 1.40
Effective Wind Speed = Vs x Sb Ve = 32.96 m/sec
2 2
Dynamic Wind Pressure = 0.613Ve qs = 665.81 N/mm
= 0.666 kN/m2
As per cl 2.1.3.3.b , ps = qs Cp Ca

Taking Ca = 1.0 from fig 4 & Cp =2.0 as per cl 2.7, ps = 0.67 x 1.0 x 2.0 = 1.332 kN/m2
Since Tree Sculpture is having open spaces inbetween only 80% is taken
2
qs = 1.07 N/mm
Applying load as udl on exposed width 70mm, F = = 0.075 kN/m

c.i) Wind Load ASCE-07-10

Cl 30.8
Basic Wind Speed = 150.0 kmph
Design wind speed = 41.7 m/sec
Exposure Category = C Sec 26.7
Importance factor (category IV) = 1.00 Table 1.5-1
Velocity Pressure Exposure Coefficient Kz (@ 4.5m) = 0.85 Table 30.3-1
Directionality Factor Kd = 0.85 Table 26.6-1
Topographic factor Kzt = 1.00 Sec 26.8
2
Wind Pressure Equation : qz = 0.613 Kz Kzt Kd V I Cl 30.8-1,2
2 2
= 0.613 x 1.00 x 1.00 x 1.00 x 44.4 x 1 = 768.9106 N/m
= 0.769 kN/m2
As per 29.5-1, wind force is taken as F = qz G Cf Af
Gust Effect Factor G = 0.85 Sec 26.9
Force coeffecient Cf = 1.20 Fig 29.5-1

Applying load as udl on exposed width 70mm, F = = 0.055 kN/m

Considering both wind load calculations, an udl of 0.075 kN/m is applied on flat bar sections
TREE SCULPTURE - STAAD MODEL
STAAD ANALYSIS
*
* Staad Model
* Deflection check
* Design check for section
 Y
X
Z Load 4

Whole Structure

6.300m

3.181m

Y
X
Z Load 4

Whole Structure

Y
X (SHS 30x30x4)
Z
Load 1

Whole Structure
(As per market availability ,flat bar sections 70 x 16mm
provided)
Materials
Mat Name E  Density 
(kN/mm2) (kg/m3) (/°C)
1 STEEL 205.000 0.300 7.83E+3 12E -6
2 STAINLESSSTEEL 197.930 0.300 7.83E+3 18E -6
3 ALUMINUM 68.948 0.330 2.71E+3 23E -6
4 CONCRETE 21.718 0.170 2.4E+3 10E -6

Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
2 TUBE 4.160 4.798 4.798 7.030 STEEL
3 PS70X15 0.000 0.000 0.000 0.000 STEEL

Plate Thickness
Prop Node A Node B Node C Node D Material
(cm) (cm) (cm) (cm)
1 5.000 5.000 5.000 5.000 STEEL

Supports
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
1 Fixed Fixed Fixed Fixed Fixed Fixed
2 Fixed Fixed Fixed Fixed Fixed Fixed
3 Fixed Fixed Fixed Fixed Fixed Fixed
4 Fixed Fixed Fixed Fixed Fixed Fixed
5 Fixed Fixed Fixed Fixed Fixed Fixed
6 Fixed Fixed Fixed Fixed Fixed Fixed
7 Fixed Fixed Fixed Fixed Fixed Fixed
8 Fixed Fixed Fixed Fixed Fixed Fixed
9 Fixed Fixed Fixed Fixed Fixed Fixed
10 Fixed Fixed Fixed Fixed Fixed Fixed
11 Fixed Fixed Fixed Fixed Fixed Fixed
12 Fixed Fixed Fixed Fixed Fixed Fixed
13 Fixed Fixed Fixed Fixed Fixed Fixed
14 Fixed Fixed Fixed Fixed Fixed Fixed
15 Fixed Fixed Fixed Fixed Fixed Fixed
16 Fixed Fixed Fixed Fixed Fixed Fixed
17 Fixed Fixed Fixed Fixed Fixed Fixed
18 Fixed Fixed Fixed Fixed Fixed Fixed
19 Fixed Fixed Fixed Fixed Fixed Fixed
20 Fixed Fixed Fixed Fixed Fixed Fixed
21 Fixed Fixed Fixed Fixed Fixed Fixed
22 Fixed Fixed Fixed Fixed Fixed Fixed
23 Fixed Fixed Fixed Fixed Fixed Fixed
24 Fixed Fixed Fixed Fixed Fixed Fixed
25 Fixed Fixed Fixed Fixed Fixed Fixed
26 Fixed Fixed Fixed Fixed Fixed Fixed
27 Fixed Fixed Fixed Fixed Fixed Fixed
28 Fixed Fixed Fixed Fixed Fixed Fixed
29 Fixed Fixed Fixed Fixed Fixed Fixed
30 Fixed Fixed Fixed Fixed Fixed Fixed
Supports Cont...
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
31 Fixed Fixed Fixed Fixed Fixed Fixed
32 Fixed Fixed Fixed Fixed Fixed Fixed
33 Fixed Fixed Fixed Fixed Fixed Fixed
34 Fixed Fixed Fixed Fixed Fixed Fixed
35 Fixed Fixed Fixed Fixed Fixed Fixed
36 Fixed Fixed Fixed Fixed Fixed Fixed
37 Fixed Fixed Fixed Fixed Fixed Fixed
38 Fixed Fixed Fixed Fixed Fixed Fixed
39 Fixed Fixed Fixed Fixed Fixed Fixed
40 Fixed Fixed Fixed Fixed Fixed Fixed

(SHS 30x30x4)
Primary Load Cases
Number Name Type

1 SX Seismic
2 SZ Seismic
3 LOAD CASE 1 Dead
4 LOAD CASE 2 Live
5 LOAD CASE 3 Wind
6 LOAD CASE 3 Wind
7 LOAD CASE 5 Temperature
8 LOAD CASE 6 Temperature

Combination Load Cases

Comb. Combination L/C Name Primary Primary L/C Name Factor

11 GENERATED BRITISH BS 5950 1 3 LOAD CASE 1 1.40

7 LOAD CASE 5 1.20
12 GENERATED BRITISH BS 5950 1 3 LOAD CASE 1 1.40
8 LOAD CASE 6 1.20
13 GENERATED BRITISH BS 5950 1 3 LOAD CASE 1 1.40
4 LOAD CASE 2 1.60
7 LOAD CASE 5 1.20
14 GENERATED BRITISH BS 5950 1 3 LOAD CASE 1 1.40
4 LOAD CASE 2 1.60
8 LOAD CASE 6 1.20
15 GENERATED BRITISH BS 5950 2 3 LOAD CASE 1 1.40
5 LOAD CASE 3 1.40
16 GENERATED BRITISH BS 5950 2 3 LOAD CASE 1 0.90
6 LOAD CASE 3 1.40
17 GENERATED BRITISH BS 5950 3 3 LOAD CASE 1 1.20
4 LOAD CASE 2 1.20
5 LOAD CASE 3 1.20
18 GENERATED BRITISH BS 5950 3 3 LOAD CASE 1 1.20
4 LOAD CASE 2 1.20
6 LOAD CASE 3 1.20
19 GENERATED BRITISH BS 5950 2 3 LOAD CASE 1 0.90
1 SX 1.00
20 GENERATED BRITISH BS 5950 2 3 LOAD CASE 1 0.90
2 SZ 1.00
21 GENERATED BRITISH BS 5950 1 3 LOAD CASE 1 1.00
4 LOAD CASE 2 1.00
22 GENERATED BRITISH BS 5950 2 3 LOAD CASE 1 1.00
5 LOAD CASE 3 1.00
23 GENERATED BRITISH BS 5950 2 3 LOAD CASE 1 1.00
6 LOAD CASE 3 1.00
24 GENERATED BRITISH BS 5950 3 3 LOAD CASE 1 1.00
4 LOAD CASE 2 0.80
5 LOAD CASE 3 0.80
25 GENERATED BRITISH BS 5950 3 3 LOAD CASE 1 1.00
4 LOAD CASE 2 0.80
6 LOAD CASE 3 0.80
31 GENERATED BRITISH BS 5950 3 3 LOAD CASE 1 1.00
4 LOAD CASE 2 1.00
5 LOAD CASE 3 1.00
32 GENERATED BRITISH BS 5950 3 3 LOAD CASE 1 1.00
 0.01 kN
0.01 kN 0.01 kN 0.01 kN0.01 kN
0.01 0.01
kN kN 0.01 0.01
kN kN
0.01 kN 0.01 kN
0.01 kN 0.02 0.02
kN kN 0.02
0.02 kN 0.02
kN 0.02 kN 0.02
kN kN 0.01 kN
0.01 kN 0.020.02
kN kN 0.02 kN kN 0.01 kN
0.01 kN 0.02 kN 0.02
0.02 kN 0.03
0.03 0.03
kN kN kN
0.03
0.03kN kNkNkN 0.02 kN 0.01 kN
0.01 kN 0.02 kN 0.03 0.03
0.03 kNkN 0.03
0.03 0.02 kN 0.01 kN
0.03kNkN 0.03
0.03kNkN 0.02 kN
0.01 kN 0.02 kN 0.03 kN 0.03 kN 0.02 kN 0.01 kN
0.01 kN 0.02 kN 0.03
0.03 kNkN
kN 0.03 kN 0.02 kN 0.01 kN
0.02 kN 0.03 0.03
0.03 kN
kN
0.01 kN0.02 kN 0.03 kN 0.03kN 0.02 kN 0.01 kN
kN 0.02
0.01 kN0.02 kN0.03
0.03kNkN 0.03
0.03 kN 0.02 kN
kN 0.01 kN
0.01 kN0.02 kN0.03
0.03 kNkN
0.03 kNkNkN 0.03
0.03
0.03
0.03 kNkN 0.02 kN 0.01 kN
0.02
0.01 kN kN
0.02 kN 0.03
0.03
0.03 kN
0.030.03
kN kN kNkNkN
0.03 0.02 0.02
kN kN0.01 kN
kN0.02
0.01 0.01 kN
kN 0.02
0.02 kN 0.02 kN 0.02
kN 0.02
kN 0.02 kN kN 0.01 kN
0.01 kN0.01 kN 0.01 kN0.01 kN
0.01 kN 0.01 kN
0.03
0.03
0.03
0.03
0.03
0.03
0.03 0.03
0.03
0.03
0.030.03
kN
0.03
kN
0.03
kN
kN
0.03
kN
0.03
kN kN
kN
kNkN
kN
kN
kN
kN
kN
kN
0.03
0.03
0.03
0.03
0.03
0.03 0.03
kN
0.03
0.03
kN
0.03
kN
0.03
0.03
0.03
0.03
0.03 kN
0.03
kN
kN
kN kN
kN
kN
kN
kN kN
kN
kN
kN

0.01
0.01
0.01 0.01
0.01
0.01
0.01 0.01
0.010.01
kN
kN kN
kN kN
kN
0.01kN
kN
0.01kN
0.01kN
0.01
0.01kN
kN
kN
kN
kN
0.01
0.01
0.01 kN
kN
kN 0.01
0.01kN kN
kN
0.01
0.01
0.01
0.01
0.01kN
0.01kN
kN
kN 0.01
0.01
0.01
0.01
0.01
0.01
kN
kN kNkN
kN kN
kN
0.01
0.01
0.01
0.01 kN
kNkN
kN

Y 0.00
0.00
0.00 0.00
0.00kN kN
0.00
kN
0.00
kN kN
kN
0.00
0.00kN
kN
kN
0.00
0.00
0.00 kN
kN
kN 0.00
0.00
0.00kN
kN
X 0.00
0.00
0.00
kN
kN
kN 0.00kN
0.00
0.00
kN
kN
kN Load 1
Z 0.00
0.00
0.00kN
kNkN 0.00
0.00
0.00
0.00 kN
kN
kN
kN
0.00
0.00
0.00kN
0.00kN 0.00
0.00
0.00
kN
0.00
0.00 kN
kN kN
kN kN
kN

SEISMIC-X

0.01 kN0.01 kN 0.01 kN 0.01 kN

0.01 kN
0.01 kN
0.01 kN 0.01 0.01
kN kN
0.01 kN 0.02 kN 0.02
0.02 kN 0.02
kN 0.02 kN 0.02
kN kN 0.01 kN
0.01 kN 0.02 kN 0.01 kN
0.01 kN 0.020.02
kN kN 0.02 kN
0.02 kN 0.01 kN
0.01 kN 0.02 0.02 kN 0.03
0.03 0.03
kN 0.03
kN kN kN
0.03
0.03kN kNkNkN 0.02 kN
kN 0.03
0.03 kN kN 0.03
0.03 0.02 kN 0.01 kN
0.01 kN 0.02 kN 0.03 0.03kNkN 0.03
0.03kNkN 0.02 kN 0.01 kN
0.02 kN 0.03 kN
0.01 kN 0.02 0.03
0.03 kN
kN 0.02 kN
kN 0.03 kN
0.01 kN 0.02 kN 0.03
kN 0.03
0.03 kN
kN 0.02 kN 0.01 kN
0.03 kN
0.01 kN 0.02 kN 0.03 kN 0.03kN
0.03 kN 0.02 kN 0.01 kN
kN 0.03 kN 0.03 0.02 kN 0.01 kN
kN 0.02
0.01 kN0.02
0.02 kN
0.03
0.03kN
0.03kNkN 0.03
0.03
0.03 kN kNkN 0.02 kN
kN 0.01 kN
0.01 kN 0.02 kN 0.03 kN
0.03 kN
0.03 kN 0.03
0.03
kNkN kN
0.01 kN 0.020.02kN kN 0.030.03
kN
0.02 0.02
kN kN kN0.010.01
0.02
kN
kN
kN kN0.02
0.01 0.01 kN 0.02
0.02 kN 0.02kN 0.02
kN kN
0.01 kN0.010.03
kN 0.01 0.01
0.01 kN kN kN
0.01
0.03
0.03
0.03
0.03
0.03
0.030.03
0.030.03 kN
kN
kN
kN
0.03
kN 0.01
kN
kN
kN
kN kNkN
kN kN
0.03
0.03
0.03
0.03 kN
0.03
0.03
kN
kN
0.03
kN
0.03 kN
kN
kN
kN
0.03
0.03
0.03
0.03 0.03
kN
0.03
0.03
kN
0.03
0.03
0.03
0.03
0.03 kN
kN
kN
kN
kN kN
kN
kN
kN
kN

0.01
0.01
0.01 0.01
0.01
0.01
0.01 0.01
0.010.01
kN
kN kN
kN kN
0.01
kN kN
kN
0.01kN
0.01kN
0.01
0.01kN
kN
kN
kN
kN
0.01
0.01
0.01 kN
kN
kN 0.01
0.01kN kN
kN
0.01
0.01
0.01
0.01
0.01kN
0.01kN
kN
kN 0.01
0.01
0.01
0.01
0.01
0.01
kN
0.01
kN kN
kN kN
kN kN
kN
0.01
0.01
0.01 kN
kN
kN

Y 0.00
0.00
0.00 0.00
0.00
0.00
0.00kN
kN 0.00
kN
kN kN
kN
0.00kN
kN
0.00
0.00kN
0.00kN
kN
kN
0.00 kN 0.00
0.00 kN
X 0.00
0.00
0.00
0.00
kN
kN
kN
kN 0.00kN
0.00
0.00
kN
kN
kN Load 2
Z 0.00
0.00
0.00 kN
kNkN 0.00
0.00
0.00
0.00 kN
kN
kN
kN
0.00
0.00
0.00kN
0.00kN
kN 0.00
0.00
0.00
0.00
0.00 kN
kN kN
kN kN
kN

SEISMIC-Z

Y
X Load 3
Z

DEAD LOAD
 -0.89 kN

Y
X Load 4
Z

LIVE LOAD

-0.075 kN/m-0.075
-0.075-0.075 kN/m-0.075
kN/m-0.075 kN/m kN/m
-0.075 kN/mkN/m -0.075 kN/mkN/m
-0.075
-0.075 kN/m -0.075
-0.075 kN/m kN/m -0.075 kN/m
-0.075 kN/m -0.075-0.075
kN/mkN/m -0.075 kN/m
-0.075 kN/m
-0.075 kN/m -0.075 kN/m
-0.075 kN/m -0.075 -0.075 kN/m -0.075 kN/m
-0.075 kN/m
kN/m -0.075 kN/m -0.075 kN/m
-0.075 kN/m -0.075 kN/m -0.075 kN/m -0.075 kN/m
-0.075 kN/m -0.075 kN/m -0.075 kN/m-0.075 kN/m
-0.075 kN/m
-0.075 kN/m -0.075 kN/m -0.075 kN/m -0.075 kN/m
-0.075 kN/m -0.075 kN/m 0.075 0.075 0.075
0.075 0.075
kN/m
kN/m
kN/m kN/m
0.075kN/m
0.075kN/mkN/m -0.075 kN/m
-0.075 kN/m
-0.075 kN/m 0.075
0.075 kN/m
kN/m 0.075
0.075 kN/m
kN/m -0.075 kN/m
-0.075 kN/m -0.075 0.0750.075
kN/m kN/m
kN/m 0.075
0.075 kN/m
kN/m -0.075 kN/m -0.075 kN/m
-0.075 kN/m -0.0750.075
kN/m
0.075 kN/mkN/m
kN/m 0.075 kN/m -0.075 kN/m -0.075 kN/m
-0.075 kN/m-0.075
0.075 kN/m 0.075 kN/m
0.075 -0.075-0.075
kN/m kN/m
-0.075
0.075 kN/m
kN/m 0.075 kN/m kN/m -0.075 kN/m
-0.075 kN/m
0.075 -0.075
kN/m kN/m
-0.075 kN/m 0.075-0.075
-0.075 kN/m
kN/m kN/m-0.075 kN/m
0.075
-0.0750.075 kN/m
kN/mkN/m -0.075 kN/m
-0.075 kN/m
-0.075-0.075
kN/m 0.075
-0.075
kN/m
0.075 kN/mkN/m
kN/m -0.075 kN/m
-0.075
0.075 kN/m
kN/m
-0.075
0.075 kN/mkN/m 0.075
0.075 -0.075
kN/m
-0.075
kN/m kN/m kN/m
0.075
0.075-0.075
kN/m
kN/m
0.075 kN/m
-0.075
0.075
kN/m
0.075
0.075 kN/m -0.075
kN/m
0.075
kN/m kN/m
kN/m

0.075
0.075
0.075
0.075 0.075
0.075
0.075
0.075
0.075 0.075 kN/m
kN/m
0.075
kN/m kN/m
0.075
kN/m
kN/m kN/m
kN/m
kN/m
0.075
0.075kN/m
0.075kN/m
kN/m
kN/m
kN/m
kN/m
0.075
0.075 kN/m
kN/m 0.075 kN/m
0.075
0.075
0.075
0.075
0.075
0.075kN/m
kN/m
0.075kN/m00.075
.075
0.075
kN/m
0.075
0.075
kN/m
0.075
kN/m
0.075
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
0.075
0.075
0.075
0.075 kN/m
kN/m
kN/m
kN/m

0.075
0.075
0.075
0.075 0.075
0.075
0.075
0.075 kN/m
kN/m
kN/m kN/m
0.075kN/m
kN/m
kN/m
0.075
0.075kN/m
kN/m
0.075kN/m
0.075 kN/m
kN/m
kN/m
Y 0.075
0.075 kN/m
kN/m
0.075
0.075
0.075
0.075 0.075
kN/m
0.075
kN/m
0.0750.075
0.075
kN/m
kN/m
kN/m
kN/m
0.075
kN/mkN/m
kN/m
kN/m
0.075
0.075
0.075
0.075
0.075 kN/mkN/m
kN/m
kN/m 0.075
kN/m0.075 kN/m
0.075
0.075
0.075 kN/m
kN/m
kN/m
kN/m
X 0.075
0.075
0.075
0.075
0.075
0.075 kN/m
kN/m
kN/m
kN/mkN/m
kN/m 0.075
0.0750.075
0.075
0.075
0.075 kN/mkN/m
kN/m
kN/m
kN/m
kN/m
Z 0.0750.075
0.0750.075
0.075
kN/m
kN/m
kN/m
0.0750.075
kN/m
0.075
0.075kN/m
kN/mkN/m
kN/m
kN/m
0.075
0.075
0.075 kN/m
kN/m
kN/m
Load 5
0.075
0.075
0.075kN/m
0.075kN/m
0.075kN/m 0.075
0.075
0.075
kN/m
0.075
0.075
kN/m kN/m
kN/m
kN/m
kN/m
kN/m
0.075
0.075kN/m
0.075 kN/m kN/m

WIND LOAD-PRESSURE

kN/m0.075
0.0750.075 kN/m0.075
kN/m0.075 kN/m kN/m
0.0750.075
kN/mkN/m 0.0750.075
kN/mkN/m
0.075 kN/m 0.075 0.075 0.075
0.075
kN/m kN/m
kN/m
0.075
kN/m kN/m
0.075
0.0750.075
kN/mkN/m
0.075 kN/m
kN/m 0.075 kN/m
0.075 kN/m 0.075
0.075 kN/m
kN/m0.075
0.075 kN/mkN/m 0.075
0.075
0.075kN/m
kN/m
0.075 kN/m
kN/m
0.075 kN/m 0.075 kN/m
0.075 kN/m 0.075
0.075 kN/m
0.075
kN/m kN/m 0.075
0.075 kN/m
0.075
kN/m kN/m
0.0750.075
kN/m
0.075kN/m
kN/m
kN/m 0.075 kN/m0.075 kN/m 0.075 kN/m
0.075 kN/m0.075
0.075
0.075 kN/m
kN/m 0.075 kN/m 0.075 kN/m 0.075 kN/m
0.075 kN/m 0.075 kN/m 0.075 kN/m
0.075 kN/m 0.075 kN/m
0.075 kN/m
0.075 kN/m 0.075kN/m
kN/m 0.075 kN/m 0.075 kN/m
0.075 kN/m0.075 0.075
kN/m
0.075 kN/m 0.075 0.075 kN/m0.075 kN/m
0.075 kN/m0.075 kN/m0.075kN/m
kN/m 0.075
0.075 kN/m
kN/m 0.075 kN/m
0.075 kN/m0.075
0.075 kN/m
0.075kN/m
kN/m
0.075 kN/m
0.075 0.075
kN/m
0.075
0.075
0.075
0.075
kN/m
kN/m kN/m kN/m
kN/m 0.075 kN/m0.075 kN/m
0.075 kN/m 0.075 0.075 kN/m
kN/m
0.075 kN/m
0.075 kN/m 0.075 kN/m
0.075 kN/m
0.075 kN/m
0.075 kN/m 0.075 kN/m
0.075 kN/m
0.075
0.075 kN/m kN/m
0.075 kN/m 0.075 kN/m
0.0750.075 0.075
kN/m kN/m 0.075
0.075 kN/mkN/m0.075 kN/m
0.075 kN/m
0.075
kN/mkN/m kN/m
0.075 0.0750.075
kN/m kN/m kN/m 0.075 kN/m
0.075 0.075 kN/m
0.075 0.075 kN/m0.075
kN/m0.075 kN/m kN/m

0.075
0.075
0.075 0.075
0.075
0.075
0.075
0.075
0.075 0.075
0.075
kN/m
kN/m kN/m
kN/m
kN/m
0.075
kN/m
0.075
kN/m
kN/m kN/m
0.075
0.075kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
0.075
0.075 kN/m
kN/m 0.075 kN/m
0.075
0.075
0.075
0.075
0.075
0.075kN/m
kN/m 00.075
.075
0.075
0.075
kN/m
0.075
0.075
kN/m
0.075
kN/m
0.075
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
0.075
0.075
0.075 kN/m
kN/m
kN/m

Y
X 0.075
0.075
0.075 0.075
0.075
0.075
0.075
0.075 kN/m
0.075
kN/m
0.075
kN/m
kN/m
kN/m kN/m
kN/m
kN/m
0.075
0.075kN/m
kN/m
kN/m
kN/m
0.075
0.075
0.075 kN/m
kN/m
0.075
0.075
0.0750.075
kN/m 0.075
0.075
0.075
kN/m
kN/m
0.075 kN/m
kN/m
kN/mkN/m
kN/m
kN/m Load 6
Z 0.075
0.075
0.075
0.075
0.075 kN/m
kN/m
kN/m
kN/m 0.075
kN/m 0.075
0.075
0.075kN/m
kN/m
0.075
0.075 kN/m
kN/m
kN/m
kN/m
0.075
0.075
0.075
0.075
0.075kN/m
kN/m
kN/m
kN/m
kN/m 0.075
0.075
0.075
0.075
0.075
0.075 kN/m
kN/m
kN/m
kN/m
kN/m
kN/m
0.075
0.0750.075
kN/m
0.075
0.075 kN/m
0.075
0.075
0.075
kN/m 0.075
kN/m
0.075
kN/m
0.075kN/m kN/m
kN/m
kN/m
kN/m
kN/m
0.075 kN/m
0.075kN/m
kN/m
0.075
0.075
0.075
0.075kN/m
kN/m
kN/m
kN/m 0.075
0.075
0.075
0.075 kN/m
kN/m
kN/m
0.075
0.075
0.075kN/m
0.0750.075
kN/m
0.075
0.075kN/m
kN/m kN/m
kN/m
kN/m

WIND LOAD-SUCTION
 Y
X Load 7
Z

TEMP +30

Y
X Load 8
Z

TEMP -30
 Defelction Check
Node Displacement Summary
Node L/C X Y Z Resultant rX rY rZ
(mm) (mm) (mm) (mm) (rad) (rad) (rad)
Max X 161 23:GENERATED BRITISH -11.636
16.270BS 5950 2 -0.000 20.002 0.000 0.000 -0.005
Min X 173 21:GENERATED BRITISH -1.254
-0.696BS 5950 1 -0.007 1.434 -0.001 0.000 0.000
Max Y 181 16.240BS 5950
23:GENERATED BRITISH 2
11.482 -0.000 19.889 0.000 0.000 -0.004
Min Y 191 0.000BS 5950
22:GENERATED BRITISH 2
-14.121 16.586 21.783 0.006 0.000 0.000
Max Z 191 0.000BS 5950
22:GENERATED BRITISH -14.121
2 16.586 21.783 0.006 0.000 0.000
Min Z 163 -0.139BS 5950
21:GENERATED BRITISH -1.431
1 -0.551 1.540 -0.000 0.000 -0.001
Max rX 191 0.000BS 5950
22:GENERATED BRITISH -14.121
2 16.586 21.783 0.006 0.000 0.000
Min rX 41 -0.012BS 5950
22:GENERATED BRITISH -0.009
2 10.296 10.296 -0.005 -0.000 0.000
Max rY 263 -0.163BS 5950
21:GENERATED BRITISH -0.027
1 -0.059 0.175 -0.000 0.000 0.000
Min rY 257 -0.222BS 5950
21:GENERATED BRITISH -0.022
1 -0.075 0.236 0.000 -0.000 0.000
Max rZ 51 10.296BS 5950
23:GENERATED BRITISH -0.004
2 0.002 10.296 -0.000 -0.000 0.005
Min rZ 56 0.007BS 5950
22:GENERATED BRITISH -0.978
2 10.303 10.349 -0.000 0.000 -0.005
Max Rst 191 0.000BS 5950
22:GENERATED BRITISH -14.121
2 16.586 21.783 0.006 0.000 0.000

Beam Displacement Detail Summary

Displacements shown in italic indicate the presence of an offset
Beam L/C d X Y Z Resultant
(m) (mm) (mm) (mm) (mm)
Max X 341 0.000BS 5950
23:GENERATED BRITISH 2
16.270 -11.636 0.000 20.002
Min X 446 1.043BS 5950
24:GENERATED BRITISH 3
-0.865 -0.625 7.444 7.520
Max Y 321 0.000BS 5950
23:GENERATED BRITISH 16.240
2 11.482 0.000 19.889
Min Y 351 0.000BS 5950
22:GENERATED BRITISH 0.000
2 -14.122 16.586 21.783
Max Z 351 0.000BS 5950
22:GENERATED BRITISH 0.000
2 -14.122 16.586 21.783
Min Z 466 1.043BS 5950
23:GENERATED BRITISH 9.296
2 0.790 -0.855 9.368
Max Rst 351 0.000BS 5950
22:GENERATED BRITISH 0.000
2 -14.122 16.586 21.783

Allowable Deflection
*
Allowable cantilever deflection as per BS 6399 = L/180
= 3.18 x1000/180 = 17.67mm > 16.58mm. Hence Safe
*
*
 Strength Check
Utilization Ratio
Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
41 TUBE TUBE 0.396 1.000 0.396 ANNEX I.1 16 4.160 4.798 4.798 7.030
42 TUBE TUBE 0.411 1.000 0.411 ANNEX I.1 16 4.160 4.798 4.798 7.030
43 TUBE TUBE 0.416 1.000 0.416 ANNEX I.1 16 4.160 4.798 4.798 7.030
44 TUBE TUBE 0.411 1.000 0.411 ANNEX I.1 16 4.160 4.798 4.798 7.030
45 TUBE TUBE 0.395 1.000 0.395 ANNEX I.1 16 4.160 4.798 4.798 7.030
46 TUBE TUBE 0.399 1.000 0.399 ANNEX I.1 15 4.160 4.798 4.798 7.030
47 TUBE TUBE 0.415 1.000 0.415 ANNEX I.1 15 4.160 4.798 4.798 7.030
48 TUBE TUBE 0.420 1.000 0.420 ANNEX I.1 15 4.160 4.798 4.798 7.030
49 TUBE TUBE 0.415 1.000 0.415 ANNEX I.1 15 4.160 4.798 4.798 7.030
50 TUBE TUBE 0.400 1.000 0.400 ANNEX I.1 15 4.160 4.798 4.798 7.030
51 TUBE TUBE 0.400 1.000 0.400 ANNEX I.1 15 4.160 4.798 4.798 7.030
52 TUBE TUBE 0.415 1.000 0.415 ANNEX I.1 15 4.160 4.798 4.798 7.030
53 TUBE TUBE 0.420 1.000 0.420 ANNEX I.1 15 4.160 4.798 4.798 7.030
54 TUBE TUBE 0.415 1.000 0.415 ANNEX I.1 15 4.160 4.798 4.798 7.030
55 TUBE TUBE 0.399 1.000 0.399 ANNEX I.1 15 4.160 4.798 4.798 7.030
56 TUBE TUBE 0.394 1.000 0.394 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
57 TUBE TUBE 0.410 1.000 0.410 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
58 TUBE TUBE 0.415 1.000 0.415 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
59 TUBE TUBE 0.411 1.000 0.411 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
60 TUBE TUBE 0.399 1.000 0.399 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
61 TUBE TUBE 0.399 1.000 0.399 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
62 TUBE TUBE 0.411 1.000 0.411 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
63 TUBE TUBE 0.415 1.000 0.415 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
64 TUBE TUBE 0.410 1.000 0.410 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
65 TUBE TUBE 0.394 1.000 0.394 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
66 TUBE TUBE 0.388 1.000 0.388 ANNEX I.1 15 4.160 4.798 4.798 7.030
67 TUBE TUBE 0.403 1.000 0.403 ANNEX I.1 15 4.160 4.798 4.798 7.030
68 TUBE TUBE 0.408 1.000 0.408 ANNEX I.1 15 4.160 4.798 4.798 7.030
69 TUBE TUBE 0.404 1.000 0.404 ANNEX I.1 15 4.160 4.798 4.798 7.030
70 TUBE TUBE 0.389 1.000 0.389 ANNEX I.1 15 4.160 4.798 4.798 7.030
71 TUBE TUBE 0.389 1.000 0.389 ANNEX I.1 15 4.160 4.798 4.798 7.030
72 TUBE TUBE 0.404 1.000 0.404 ANNEX I.1 15 4.160 4.798 4.798 7.030
73 TUBE TUBE 0.408 1.000 0.408 ANNEX I.1 15 4.160 4.798 4.798 7.030
74 TUBE TUBE 0.403 1.000 0.403 ANNEX I.1 15 4.160 4.798 4.798 7.030
75 TUBE TUBE 0.388 1.000 0.388 ANNEX I.1 15 4.160 4.798 4.798 7.030
76 TUBE TUBE 0.395 1.000 0.395 ANNEX I.1 16 4.160 4.798 4.798 7.030
77 TUBE TUBE 0.411 1.000 0.411 ANNEX I.1 16 4.160 4.798 4.798 7.030
78 TUBE TUBE 0.416 1.000 0.416 ANNEX I.1 16 4.160 4.798 4.798 7.030
79 TUBE TUBE 0.411 1.000 0.411 ANNEX I.1 16 4.160 4.798 4.798 7.030
80 TUBE TUBE 0.396 1.000 0.396 ANNEX I.1 16 4.160 4.798 4.798 7.030
81 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
82 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
83 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
84 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
85 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
86 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
87 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
88 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
89 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
90 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
91 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
92 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
93 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
94 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 13 10.500 42.875 1.969 6.812
Utilization Ratio Cont...
Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
95 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
96 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
97 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
98 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
99 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
100 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
101 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
102 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
103 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
104 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
105 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
106 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
107 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
108 PS70X15 PS70X15 0.392 1.000 0.392 BS-4.7 (C) 11 10.500 42.875 1.969 6.812
109 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
110 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
111 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
112 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
113 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
114 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
115 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
116 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
117 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
118 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
119 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
120 PS70X15 PS70X15 0.399 1.000 0.399 BS-4.8.3.3.3 13 10.500 42.875 1.969 6.812
121 TUBE TUBE 0.027 1.000 0.027 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
122 TUBE TUBE 0.025 1.000 0.025 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
123 TUBE TUBE 0.023 1.000 0.023 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
124 TUBE TUBE 0.022 1.000 0.022 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
125 TUBE TUBE 0.023 1.000 0.023 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
126 TUBE TUBE 0.024 1.000 0.024 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
127 TUBE TUBE 0.025 1.000 0.025 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
128 TUBE TUBE 0.025 1.000 0.025 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
129 TUBE TUBE 0.025 1.000 0.025 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
130 TUBE TUBE 0.024 1.000 0.024 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
131 TUBE TUBE 0.026 1.000 0.026 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
132 TUBE TUBE 0.027 1.000 0.027 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
133 TUBE TUBE 0.028 1.000 0.028 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
134 TUBE TUBE 0.029 1.000 0.029 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
135 TUBE TUBE 0.028 1.000 0.028 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
136 TUBE TUBE 0.027 1.000 0.027 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
137 TUBE TUBE 0.026 1.000 0.026 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
138 TUBE TUBE 0.024 1.000 0.024 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
139 TUBE TUBE 0.025 1.000 0.025 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
140 TUBE TUBE 0.027 1.000 0.027 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
141 TUBE TUBE 0.028 1.000 0.028 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
142 TUBE TUBE 0.029 1.000 0.029 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
143 TUBE TUBE 0.029 1.000 0.029 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
144 TUBE TUBE 0.028 1.000 0.028 ANNEX I.1 15 4.160 4.798 4.798 7.030
145 TUBE TUBE 0.028 1.000 0.028 ANNEX I.1 15 4.160 4.798 4.798 7.030
146 TUBE TUBE 0.028 1.000 0.028 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
147 TUBE TUBE 0.029 1.000 0.029 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
148 TUBE TUBE 0.028 1.000 0.028 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
Utilization Ratio Cont...
Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
149 TUBE TUBE 0.027 1.000 0.027 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
150 TUBE TUBE 0.026 1.000 0.026 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
151 TUBE TUBE 0.024 1.000 0.024 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
152 TUBE TUBE 0.025 1.000 0.025 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
153 TUBE TUBE 0.025 1.000 0.025 BS-4.8.2.2 16 4.160 4.798 4.798 7.030
154 TUBE TUBE 0.025 1.000 0.025 ANNEX I.1 15 4.160 4.798 4.798 7.030
155 TUBE TUBE 0.027 1.000 0.027 ANNEX I.1 15 4.160 4.798 4.798 7.030
156 TUBE TUBE 0.028 1.000 0.028 ANNEX I.1 15 4.160 4.798 4.798 7.030
157 TUBE TUBE 0.028 1.000 0.028 ANNEX I.1 15 4.160 4.798 4.798 7.030
158 TUBE TUBE 0.029 1.000 0.029 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
159 TUBE TUBE 0.029 1.000 0.029 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
160 TUBE TUBE 0.028 1.000 0.028 BS-4.8.3.3.3 15 4.160 4.798 4.798 7.030
161 PS70X15 PS70X15 0.214 1.000 0.214 ANNEX I.1 15 10.500 42.875 1.969 6.812
162 PS70X15 PS70X15 0.213 1.000 0.213 ANNEX I.1 15 10.500 42.875 1.969 6.812
163 PS70X15 PS70X15 0.208 1.000 0.208 ANNEX I.1 15 10.500 42.875 1.969 6.812
164 PS70X15 PS70X15 0.200 1.000 0.200 ANNEX I.1 15 10.500 42.875 1.969 6.812
165 PS70X15 PS70X15 0.189 1.000 0.189 ANNEX I.1 15 10.500 42.875 1.969 6.812
166 PS70X15 PS70X15 0.175 1.000 0.175 ANNEX I.1 15 10.500 42.875 1.969 6.812
167 PS70X15 PS70X15 0.221 1.000 0.221 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
168 PS70X15 PS70X15 0.205 1.000 0.205 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
169 PS70X15 PS70X15 0.187 1.000 0.187 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
170 PS70X15 PS70X15 0.167 1.000 0.167 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
171 PS70X15 PS70X15 0.147 1.000 0.147 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
172 PS70X15 PS70X15 0.167 1.000 0.167 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
173 PS70X15 PS70X15 0.187 1.000 0.187 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
174 PS70X15 PS70X15 0.205 1.000 0.205 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
175 PS70X15 PS70X15 0.221 1.000 0.221 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
176 PS70X15 PS70X15 0.175 1.000 0.175 ANNEX I.1 15 10.500 42.875 1.969 6.812
177 PS70X15 PS70X15 0.189 1.000 0.189 ANNEX I.1 15 10.500 42.875 1.969 6.812
178 PS70X15 PS70X15 0.200 1.000 0.200 ANNEX I.1 15 10.500 42.875 1.969 6.812
179 PS70X15 PS70X15 0.208 1.000 0.208 ANNEX I.1 15 10.500 42.875 1.969 6.812
180 PS70X15 PS70X15 0.213 1.000 0.213 ANNEX I.1 15 10.500 42.875 1.969 6.812
181 PS70X15 PS70X15 0.214 1.000 0.214 ANNEX I.1 15 10.500 42.875 1.969 6.812
182 PS70X15 PS70X15 0.211 1.000 0.211 ANNEX I.1 15 10.500 42.875 1.969 6.812
183 PS70X15 PS70X15 0.205 1.000 0.205 ANNEX I.1 15 10.500 42.875 1.969 6.812
184 PS70X15 PS70X15 0.196 1.000 0.196 ANNEX I.1 15 10.500 42.875 1.969 6.812
185 PS70X15 PS70X15 0.183 1.000 0.183 ANNEX I.1 15 10.500 42.875 1.969 6.812
186 PS70X15 PS70X15 0.168 1.000 0.168 ANNEX I.1 15 10.500 42.875 1.969 6.812
187 PS70X15 PS70X15 0.151 1.000 0.151 ANNEX I.1 15 10.500 42.875 1.969 6.812
188 PS70X15 PS70X15 0.132 1.000 0.132 BS-4.9 16 10.500 42.875 1.969 6.812
189 PS70X15 PS70X15 0.137 1.000 0.137 ANNEX I.1 16 10.500 42.875 1.969 6.812
190 PS70X15 PS70X15 0.139 1.000 0.139 ANNEX I.1 16 10.500 42.875 1.969 6.812
191 PS70X15 PS70X15 0.139 1.000 0.139 ANNEX I.1 16 10.500 42.875 1.969 6.812
192 PS70X15 PS70X15 0.138 1.000 0.138 ANNEX I.1 16 10.500 42.875 1.969 6.812
193 PS70X15 PS70X15 0.133 1.000 0.133 ANNEX I.1 16 10.500 42.875 1.969 6.812
194 PS70X15 PS70X15 0.131 1.000 0.131 ANNEX I.1 15 10.500 42.875 1.969 6.812
195 PS70X15 PS70X15 0.151 1.000 0.151 ANNEX I.1 15 10.500 42.875 1.969 6.812
196 PS70X15 PS70X15 0.168 1.000 0.168 ANNEX I.1 15 10.500 42.875 1.969 6.812
197 PS70X15 PS70X15 0.183 1.000 0.183 ANNEX I.1 15 10.500 42.875 1.969 6.812
198 PS70X15 PS70X15 0.196 1.000 0.196 ANNEX I.1 15 10.500 42.875 1.969 6.812
199 PS70X15 PS70X15 0.205 1.000 0.205 ANNEX I.1 15 10.500 42.875 1.969 6.812
200 PS70X15 PS70X15 0.211 1.000 0.211 ANNEX I.1 15 10.500 42.875 1.969 6.812
201 TUBE TUBE 0.051 1.000 0.051 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
202 TUBE TUBE 0.050 1.000 0.050 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
Utilization Ratio Cont...
Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
203 TUBE TUBE 0.049 1.000 0.049 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
204 TUBE TUBE 0.048 1.000 0.048 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
205 TUBE TUBE 0.047 1.000 0.047 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
206 TUBE TUBE 0.047 1.000 0.047 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
207 TUBE TUBE 0.046 1.000 0.046 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
208 TUBE TUBE 0.045 1.000 0.045 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
209 TUBE TUBE 0.044 1.000 0.044 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
210 TUBE TUBE 0.044 1.000 0.044 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
211 TUBE TUBE 0.044 1.000 0.044 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
212 TUBE TUBE 0.044 1.000 0.044 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
213 TUBE TUBE 0.045 1.000 0.045 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
214 TUBE TUBE 0.046 1.000 0.046 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
215 TUBE TUBE 0.047 1.000 0.047 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
216 TUBE TUBE 0.047 1.000 0.047 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
217 TUBE TUBE 0.048 1.000 0.048 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
218 TUBE TUBE 0.049 1.000 0.049 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
219 TUBE TUBE 0.050 1.000 0.050 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
220 TUBE TUBE 0.051 1.000 0.051 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
221 TUBE TUBE 0.052 1.000 0.052 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
222 TUBE TUBE 0.052 1.000 0.052 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
223 TUBE TUBE 0.053 1.000 0.053 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
224 TUBE TUBE 0.053 1.000 0.053 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
225 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
226 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
227 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
228 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
229 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
230 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
231 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
232 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
233 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
234 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
235 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
236 TUBE TUBE 0.054 1.000 0.054 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
237 TUBE TUBE 0.053 1.000 0.053 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
238 TUBE TUBE 0.053 1.000 0.053 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
239 TUBE TUBE 0.052 1.000 0.052 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
240 TUBE TUBE 0.052 1.000 0.052 BS-4.8.2.2 15 4.160 4.798 4.798 7.030
241 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
242 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
243 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
244 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
245 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
246 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
247 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
248 PS70X15 PS70X15 0.059 1.000 0.059 ANNEX I.1 15 10.500 42.875 1.969 6.812
249 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
250 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
251 PS70X15 PS70X15 0.057 1.000 0.057 ANNEX I.1 15 10.500 42.875 1.969 6.812
252 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
253 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
254 PS70X15 PS70X15 0.059 1.000 0.059 ANNEX I.1 15 10.500 42.875 1.969 6.812
255 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
256 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
Utilization Ratio Cont...
Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
257 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
258 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
259 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
260 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
261 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
262 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
263 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
264 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
265 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
266 PS70X15 PS70X15 0.059 1.000 0.059 ANNEX I.1 15 10.500 42.875 1.969 6.812
267 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
268 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
269 PS70X15 PS70X15 0.057 1.000 0.057 ANNEX I.1 15 10.500 42.875 1.969 6.812
270 PS70X15 PS70X15 0.056 1.000 0.056 ANNEX I.1 15 10.500 42.875 1.969 6.812
271 PS70X15 PS70X15 0.055 1.000 0.055 ANNEX I.1 15 10.500 42.875 1.969 6.812
272 PS70X15 PS70X15 0.056 1.000 0.056 ANNEX I.1 15 10.500 42.875 1.969 6.812
273 PS70X15 PS70X15 0.057 1.000 0.057 ANNEX I.1 15 10.500 42.875 1.969 6.812
274 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
275 PS70X15 PS70X15 0.058 1.000 0.058 ANNEX I.1 15 10.500 42.875 1.969 6.812
276 PS70X15 PS70X15 0.059 1.000 0.059 ANNEX I.1 15 10.500 42.875 1.969 6.812
277 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
278 PS70X15 PS70X15 0.060 1.000 0.060 ANNEX I.1 15 10.500 42.875 1.969 6.812
279 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
280 PS70X15 PS70X15 0.061 1.000 0.061 ANNEX I.1 15 10.500 42.875 1.969 6.812
321 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
322 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
323 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
324 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
325 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
326 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
327 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
328 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
329 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
330 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
331 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
332 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
333 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
334 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
335 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
336 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
337 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
338 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
339 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
340 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
341 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
342 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
343 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
344 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
345 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
346 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
347 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
348 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
349 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
350 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
Utilization Ratio Cont...
Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
351 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
352 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
353 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
354 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
355 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
356 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
357 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
358 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
359 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
360 PS70X15 PS70X15 0.018 1.000 0.018 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
361 PS70X15 PS70X15 0.312 1.000 0.312 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
362 PS70X15 PS70X15 0.208 1.000 0.208 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
363 PS70X15 PS70X15 0.209 1.000 0.209 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
364 PS70X15 PS70X15 0.209 1.000 0.209 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
365 PS70X15 PS70X15 0.208 1.000 0.208 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
366 PS70X15 PS70X15 0.208 1.000 0.208 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
367 PS70X15 PS70X15 0.207 1.000 0.207 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
368 PS70X15 PS70X15 0.206 1.000 0.206 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
369 PS70X15 PS70X15 0.205 1.000 0.205 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
370 PS70X15 PS70X15 0.203 1.000 0.203 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
371 PS70X15 PS70X15 0.201 1.000 0.201 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
372 PS70X15 PS70X15 0.198 1.000 0.198 BS-4.8.3.3.1 13 10.500 42.875 1.969 6.812
373 PS70X15 PS70X15 0.251 1.000 0.251 BS-4.7 (C) 18 10.500 42.875 1.969 6.812
374 PS70X15 PS70X15 0.316 1.000 0.316 BS-4.7 (C) 18 10.500 42.875 1.969 6.812
375 PS70X15 PS70X15 0.381 1.000 0.381 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
376 PS70X15 PS70X15 0.444 1.000 0.444 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
377 PS70X15 PS70X15 0.498 1.000 0.498 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
378 PS70X15 PS70X15 0.541 1.000 0.541 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
379 PS70X15 PS70X15 0.573 1.000 0.573 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
380 PS70X15 PS70X15 0.592 1.000 0.592 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
381 PS70X15 PS70X15 0.599 1.000 0.599 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
382 PS70X15 PS70X15 0.592 1.000 0.592 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
383 PS70X15 PS70X15 0.573 1.000 0.573 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
384 PS70X15 PS70X15 0.541 1.000 0.541 BS-4.7 (C) 16 10.500 42.875 1.969 6.812
385 PS70X15 PS70X15 0.521 1.000 0.521 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
386 PS70X15 PS70X15 0.584 1.000 0.584 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
387 PS70X15 PS70X15 0.638 1.000 0.638 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
388 PS70X15 PS70X15 0.698 1.000 0.698 ANNEX I.1 15 10.500 42.875 1.969 6.812
389 PS70X15 PS70X15 0.748 1.000 0.748 ANNEX I.1 15 10.500 42.875 1.969 6.812
390 PS70X15 PS70X15 0.751 1.000 0.751 ANNEX I.1 15 10.500 42.875 1.969 6.812
391 PS70X15 PS70X15 0.739 1.000 0.739 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
392 PS70X15 PS70X15 0.751 1.000 0.751 ANNEX I.1 15 10.500 42.875 1.969 6.812
393 PS70X15 PS70X15 0.748 1.000 0.748 ANNEX I.1 15 10.500 42.875 1.969 6.812
394 PS70X15 PS70X15 0.698 1.000 0.698 ANNEX I.1 15 10.500 42.875 1.969 6.812
395 PS70X15 PS70X15 0.638 1.000 0.638 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
396 PS70X15 PS70X15 0.584 1.000 0.584 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
397 PS70X15 PS70X15 0.521 1.000 0.521 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
398 PS70X15 PS70X15 0.450 1.000 0.450 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
399 PS70X15 PS70X15 0.374 1.000 0.374 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
400 PS70X15 PS70X15 0.293 1.000 0.293 BS-4.7 (C) 15 10.500 42.875 1.969 6.812
441 PS70X15 PS70X15 0.371 1.000 0.371 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
442 PS70X15 PS70X15 0.308 1.000 0.308 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
443 PS70X15 PS70X15 0.242 1.000 0.242 BS-4.8.3.3.1 15 10.500 42.875 1.969 6.812
444 PS70X15 PS70X15 0.173 1.000 0.173 ANNEX I.1 15 10.500 42.875 1.969 6.812
VERIFICATION OF
CONNECTION DETAILS
*
* Idea Statica Model for baseplate &
anchor bolts
*
* Weld Check
*
*PROKON Model for Foundation
design
 Factored Load cases
Reaction Summary
Horizontal Vertical Horizontal Moment
Node L/C FX FY FZ MX MY MZ
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max FX 2 4.75BS 59500.04
13:GENERATED BRITISH 1 -0.15 -0.028 0.004 -0.286
Min FX 1 -5.15BS 59500.19
14:GENERATED BRITISH 1 -0.20 -0.010 0.028 0.201
Max FY 31 0.00BS 59504.15
15:GENERATED BRITISH 2 2.13 -0.154 -0.000 0.000
Min FY 21 2.47BS 5950-2.70
16:GENERATED BRITISH 2 -0.00 0.000 0.000 0.163
Max FZ 11 0.00BS 59500.88
12:GENERATED BRITISH 1 4.69 0.260 0.000 0.000
Min FZ 31 -0.00BS 59500.88
12:GENERATED BRITISH 1 -4.69 -0.260 0.000 -0.000
Max MX 31 0.00BS 59500.88
11:GENERATED BRITISH 1 4.28 0.271 -0.000 0.000
Min MX 11 -0.00BS 59500.88
11:GENERATED BRITISH 1 -4.28 -0.271 -0.000 -0.000
Max MY 1 -5.15BS 59500.19
14:GENERATED BRITISH 1 -0.20 -0.010 0.028 0.201
Min MY 3 3.70BS 59500.20
13:GENERATED BRITISH 1 -1.22 -0.081 -0.025 -0.321
Max MZ 21 -4.28BS 59500.88
11:GENERATED BRITISH 1 0.00 -0.000 -0.000 0.271
Min MZ 1 3.83BS 59500.19
13:GENERATED BRITISH 1 -0.20 -0.010 0.028 -0.330

Considering the criitcal load cases from reaction summary,

support reactions for all support joints are considered and
net forces (with net tension and compression as separate
load cases as per comments) are considered for verification
of base plate and anchor bolts
 Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm Mz kNm
1 11 GENERATED BRITISH
4.28 BS 5950
0.88 1 0 0 0 -0.271
2 11 GENERATED BRITISH
4.23 BS 5950
0.88 1 -0.67 -0.042 0 -0.268
3 11 GENERATED BRITISH
4.07 BS 5950
0.88 1 -1.32 -0.084 0 -0.258
4 11 GENERATED BRITISH
3.81 BS 5950
0.88 1 -1.94 -0.123 0 -0.242
5 11 GENERATED BRITISH
3.46 BS 5950
0.88 1 -2.52 -0.159 0 -0.219
6 11 GENERATED BRITISH
3.03 BS 5950
0.88 1 -3.03 -0.192 0 -0.192
7 11 GENERATED BRITISH
2.52 BS 5950
0.88 1 -3.46 -0.219 0 -0.159
8 11 GENERATED BRITISH
1.94 BS 5950
0.88 1 -3.81 -0.242 0 -0.123
9 11 GENERATED BRITISH
1.32 BS 5950
0.88 1 -4.07 -0.258 0 -0.084
10 11 GENERATED BRITISH
0.67 BS 5950
0.88 1 -4.23 -0.268 0 -0.042
11 11 GENERATED BRITISH
0 BS 5950
0.88 1 -4.28 -0.271 0 0
12 11 GENERATED BRITISH
-0.67 BS 5950
0.88 1 -4.23 -0.268 0 0.042
13 11 GENERATED BRITISH
-1.32 BS 5950
0.88 1 -4.07 -0.258 0 0.084
14 11 GENERATED BRITISH
-1.94 BS 5950
0.88 1 -3.81 -0.242 0 0.123
15 11 GENERATED BRITISH
-2.52 BS 5950
0.88 1 -3.46 -0.219 0 0.159
16 11 GENERATED BRITISH
-3.03 BS 5950
0.88 1 -3.03 -0.192 0 0.192
17 11 GENERATED BRITISH
-3.46 BS 5950
0.88 1 -2.52 -0.159 0 0.219
18 11 GENERATED BRITISH
-3.81 BS 5950
0.88 1 -1.94 -0.123 0 0.242
19 11 GENERATED BRITISH
-4.07 BS 5950
0.88 1 -1.32 -0.084 0 0.258
20 11 GENERATED BRITISH
-4.23 BS 5950
0.88 1 -0.67 -0.042 0 0.268
21 11 GENERATED BRITISH
-4.28 BS 5950
0.88 1 0 0 0 0.271
22 11 GENERATED BRITISH
-4.23 BS 5950
0.88 1 0.67 0.042 0 0.268
23 11 GENERATED BRITISH
-4.07 BS 5950
0.88 1 1.32 0.084 0 0.258
24 11 GENERATED BRITISH
-3.81 BS 5950
0.88 1 1.94 0.123 0 0.242
25 11 GENERATED BRITISH
-3.46 BS 5950
0.88 1 2.52 0.159 0 0.219
26 11 GENERATED BRITISH
-3.03 BS 5950
0.88 1 3.03 0.192 0 0.192
27 11 GENERATED BRITISH
-2.52 BS 5950
0.88 1 3.46 0.219 0 0.159
28 11 GENERATED BRITISH
-1.94 BS 5950
0.88 1 3.81 0.242 0 0.123
29 11 GENERATED BRITISH
-1.32 BS 5950
0.88 1 4.07 0.258 0 0.084
30 11 GENERATED BRITISH
-0.67 BS 5950
0.88 1 4.23 0.268 0 0.042
31 11 GENERATED BRITISH
0 BS 5950
0.88 1 4.28 0.271 0 0
32 11 GENERATED BRITISH
0.67 BS 5950
0.88 1 4.23 0.268 0 -0.042
33 11 GENERATED BRITISH
1.32 BS 5950
0.88 1 4.07 0.258 0 -0.084
34 11 GENERATED BRITISH
1.94 BS 5950
0.88 1 3.81 0.242 0 -0.123
35 11 GENERATED BRITISH
2.52 BS 5950
0.88 1 3.46 0.219 0 -0.159
36 11 GENERATED BRITISH
3.03 BS 5950
0.88 1 3.03 0.192 0 -0.192
37 11 GENERATED BRITISH
3.46 BS 5950
0.88 1 2.52 0.159 0 -0.219
38 11 GENERATED BRITISH
3.81 BS 5950
0.88 1 1.94 0.123 0 -0.242
39 11 GENERATED BRITISH
4.07 BS 5950
0.88 1 1.32 0.084 0 -0.258
40 11 GENERATED BRITISH
4.23 BS 5950
0.88 1 0.67 0.042 0 -0.268
0 35.2 -1E-15 2.57E-16 0 0

Horizontal Vertical Horizontal Moment

Node L/C Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm Mz kNm
1 13 GENERATED BRITISH
3.83 BS 5950
0.19 1 -0.2 -0.01 0.028 -0.33
 2 13 GENERATED BRITISH
4.75 BS 5950
0.04 1 -0.15 -0.028 0.004 -0.286
3 13 GENERATED BRITISH
3.7 BS 5950
0.2 1 -1.22 -0.081 -0.025 -0.321
4 13 GENERATED BRITISH
3.94 BS 5950
0.83 1 -1.35 -0.129 0.002 -0.28
5 13 GENERATED BRITISH
3.57 BS 5950
1.01 1 -1.8 -0.157 -0.002 -0.231
6 13 GENERATED BRITISH
3.24 BS 5950
1.04 1 -2.43 -0.186 -0.002 -0.196
7 13 GENERATED BRITISH
2.79 BS 5950
1.02 1 -3.05 -0.213 -0.002 -0.163
8 13 GENERATED BRITISH
2.23 BS 5950
0.99 1 -3.56 -0.235 -0.001 -0.127
9 13 GENERATED BRITISH
1.59 BS 5950
0.97 1 -3.94 -0.251 0 -0.088
10 13 GENERATED BRITISH
0.9 BS 5950
0.96 1 -4.19 -0.261 0 -0.047
11 13 GENERATED BRITISH
0.18 BS 5950
0.95 1 -4.32 -0.265 0.001 -0.005
12 13 GENERATED BRITISH
-0.54 BS 5950
0.95 1 -4.31 -0.262 0.001 0.037
13 13 GENERATED BRITISH
-1.25 BS 5950
0.94 1 -4.18 -0.252 0.001 0.078
14 13 GENERATED BRITISH
-1.92 BS 5950
0.94 1 -3.93 -0.237 0.001 0.117
15 13 GENERATED BRITISH
-2.54 BS 5950
0.94 1 -3.58 -0.215 0.001 0.153
16 13 GENERATED BRITISH
-3.09 BS 5950
0.93 1 -3.13 -0.189 0.001 0.185
17 13 GENERATED BRITISH
-3.55 BS 5950
0.93 1 -2.6 -0.157 0.001 0.213
18 13 GENERATED BRITISH
-3.92 BS 5950
0.93 1 -2 -0.122 0.001 0.235
19 13 GENERATED BRITISH
-4.19 BS 5950
0.93 1 -1.35 -0.083 0.001 0.252
20 13 GENERATED BRITISH
-4.35 BS 5950
0.93 1 -0.67 -0.043 0.001 0.262
21 13 GENERATED BRITISH
-4.4 BS 5950
0.93 1 0.02 -0.001 0.001 0.266
22 13 GENERATED BRITISH
-4.34 BS 5950
0.92 1 0.71 0.041 0.001 0.263
23 13 GENERATED BRITISH
-4.17 BS 5950
0.92 1 1.38 0.082 0.001 0.253
24 13 GENERATED BRITISH
-3.89 BS 5950
0.92 1 2.02 0.121 0 0.237
25 13 GENERATED BRITISH
-3.52 BS 5950
0.92 1 2.6 0.157 0 0.215
26 13 GENERATED BRITISH
-3.06 BS 5950
0.92 1 3.12 0.189 0 0.188
27 13 GENERATED BRITISH
-2.52 BS 5950
0.92 1 3.56 0.216 0 0.156
28 13 GENERATED BRITISH
-1.92 BS 5950
0.91 1 3.91 0.238 0 0.12
29 13 GENERATED BRITISH
-1.26 BS 5950
0.91 1 4.15 0.254 0 0.081
30 13 GENERATED BRITISH
-0.58 BS 5950
0.91 1 4.29 0.264 0 0.04
31 13 GENERATED BRITISH
0.12 BS 5950
0.91 1 4.31 0.267 0.001 -0.002
32 13 GENERATED BRITISH
0.82 BS 5950
0.92 1 4.21 0.264 0.001 -0.044
33 13 GENERATED BRITISH
1.49 BS 5950
0.92 1 3.99 0.255 0.001 -0.085
34 13 GENERATED BRITISH
2.12 BS 5950
0.92 1 3.66 0.239 0.001 -0.125
35 13 GENERATED BRITISH
2.68 BS 5950
0.93 1 3.22 0.217 0.002 -0.161
36 13 GENERATED BRITISH
3.16 BS 5950
0.95 1 2.68 0.189 0.002 -0.194
37 13 GENERATED BRITISH
3.53 BS 5950
0.99 1 2.04 0.157 0.003 -0.222
38 13 GENERATED BRITISH
3.77 BS 5950
1.03 1 1.34 0.121 0.003 -0.245
39 13 GENERATED BRITISH
3.89 BS 5950
1.04 1 0.65 0.082 0.003 -0.27
40 13 GENERATED BRITISH
4.11 BS 5950
0.89 1 0.1 0.041 -0.001 -0.308
1.4 35.3 -2.4E-15 0.017 0.031 -0.379

Horizontal Vertical Horizontal Moment

Node L/C Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm Mz kNm
1 15 GENERATED BRITISH
-0.26 BS 5950
1.06 2 -3.42 -0.11 0.001 -0.007
2 15 GENERATED BRITISH
-1.16 BS 5950
0.57 2 -3.24 -0.112 0.001 -0.015
3 15 GENERATED BRITISH
-1.96 BS 59500.1 2 -2.78 -0.117 0.001 -0.022
19 15 GENERATED BRITISH
1.96 BS 59500.1 2 -2.78 -0.117 -0.001 0.022
 20 15 GENERATED BRITISH
1.16 BS 5950
0.57 2 -3.24 -0.112 -0.001 0.015
21 15 GENERATED BRITISH
0.26 BS 5950
1.06 2 -3.42 -0.11 -0.001 0.007
22 15 GENERATED BRITISH
-0.64 BS 5950
1.54 2 -3.32 -0.11 -0.001 -0.001
23 15 GENERATED BRITISH
-1.46 BS 5950
2.01 2 -2.95 -0.113 -0.001 -0.008
24 15 GENERATED BRITISH
-2.12 BS 5950
2.46 2 -2.34 -0.117 -0.001 -0.014
25 15 GENERATED BRITISH
-2.55 BS 5950
2.87 2 -1.57 -0.123 -0.001 -0.018
26 15 GENERATED BRITISH
-2.72 BS 5950
3.24 2 -0.7 -0.13 -0.001 -0.02
27 15 GENERATED BRITISH
-2.61 BS 5950
3.56 2 0.17 -0.137 -0.001 -0.02
28 15 GENERATED BRITISH
-2.23 BS 5950
3.81 2 0.96 -0.144 0 -0.017
29 15 GENERATED BRITISH
-1.63 BS 5950
3.99 2 1.59 -0.149 0 -0.013
30 15 GENERATED BRITISH
-0.86 BS 5950
4.11 2 2 -0.152 0 -0.007
31 15 GENERATED BRITISH
0 BS 5950
4.15 2 2.13 -0.154 0 0
32 15 GENERATED BRITISH
0.86 BS 5950
4.11 2 1.99 -0.152 0 0.007
33 15 GENERATED BRITISH
1.63 BS 5950
3.99 2 1.59 -0.149 0 0.013
34 15 GENERATED BRITISH
2.23 BS 5950
3.81 2 0.96 -0.144 0 0.017
35 15 GENERATED BRITISH
2.61 BS 5950
3.56 2 0.17 -0.137 0 0.02
36 15 GENERATED BRITISH
2.72 BS 5950
3.24 2 -0.7 -0.13 0 0.02
37 15 GENERATED BRITISH
2.55 BS 5950
2.87 2 -1.57 -0.123 0.001 0.018
38 15 GENERATED BRITISH
2.12 BS 5950
2.46 2 -2.34 -0.117 0.001 0.014
39 15 GENERATED BRITISH
1.46 BS 5950
2.01 2 -2.95 -0.113 0.001 0.008
40 15 GENERATED BRITISH
0.64 BS 5950
1.54 2 -3.32 -0.11 0.001 0.001
-1.4E-15 62.79 -29.08 -3.182 -0.002 4.34E-18
4 15 GENERATED BRITISH
-2.59 BS -0.35
5950 2 -2.1 -0.124 0.001 -0.027
5 15 GENERATED BRITISH
-2.98 BS -0.76
5950 2 -1.26 -0.132 0.001 -0.03
6 15 GENERATED BRITISH
-3.1 BS -1.13
5950 2 -0.33 -0.141 0.001 -0.031
7 15 GENERATED BRITISH
-2.92 BS -1.44
5950 2 0.6 -0.149 0.001 -0.029
8 15 GENERATED BRITISH
-2.47 BS 5950
-1.7 2 1.43 -0.157 0 -0.024
9 15 GENERATED BRITISH
-1.79 BS -1.88
5950 2 2.09 -0.163 0 -0.017
10 15 GENERATED BRITISH
-0.94 BS -1.99
5950 2 2.51 -0.167 0 -0.009
11 15 GENERATED BRITISH
0 BS -2.03
5950 2 2.66 -0.168 0 0
12 15 GENERATED BRITISH
0.94 BS -1.99
5950 2 2.51 -0.167 0 0.009
13 15 GENERATED BRITISH
1.79 BS -1.88
5950 2 2.09 -0.163 0 0.017
14 15 GENERATED BRITISH
2.47 BS 5950
-1.7 2 1.43 -0.157 0 0.024
15 15 GENERATED BRITISH
2.92 BS -1.44
5950 2 0.6 -0.149 0 0.029
16 15 GENERATED BRITISH
3.1 BS -1.13
5950 2 -0.33 -0.141 0 0.031
17 15 GENERATED BRITISH
2.98 BS -0.76
5950 2 -1.26 -0.132 -0.001 0.03
18 15 GENERATED BRITISH
2.59 BS -0.35
5950 2 -2.1 -0.124 -0.001 0.027
0 -20.53 8.54 -2.234 0.002 3.12E-17

Horizontal Vertical Horizontal Moment

Node L/C Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm Mz kNm
1 16 GENERATED BRITISH
2.32 BS 5950
3.48 2 0 0 0 0.159
2 16 GENERATED BRITISH
2.18 BS 5950
3.44 2 -0.89 0.008 0 0.158
3 16 GENERATED BRITISH
1.77 BS 5950
3.33 2 -1.69 0.014 0 0.154
4 16 GENERATED BRITISH
1.13 BS 5950
3.14 2 -2.32 0.02 0 0.149
5 16 GENERATED BRITISH
0.33 BS 5950
2.89 2 -2.72 0.023 0 0.142
6 16 GENERATED BRITISH
-0.57 BS 5950
2.58 2 -2.86 0.024 0 0.134
 7 16 GENERATED BRITISH
-1.46 BS 5950
2.21 2 -2.71 0.023 0.001 0.127
8 16 GENERATED BRITISH
-2.26 BS 5950
1.79 2 -2.29 0.019 0.001 0.12
9 16 GENERATED BRITISH
-2.89 BS 5950
1.35 2 -1.64 0.013 0.001 0.114
10 16 GENERATED BRITISH
-3.29 BS 5950
0.88 2 -0.82 0.006 0.001 0.111
11 16 GENERATED BRITISH
-3.42 BS 5950
0.39 2 0.08 -0.002 0.001 0.11
31 16 GENERATED BRITISH
-3.42 BS 5950
0.39 2 -0.08 0.002 -0.001 0.11
32 16 GENERATED BRITISH
-3.29 BS 5950
0.88 2 0.82 -0.006 -0.001 0.111
33 16 GENERATED BRITISH
-2.89 BS 5950
1.35 2 1.64 -0.013 -0.001 0.114
34 16 GENERATED BRITISH
-2.26 BS 5950
1.79 2 2.29 -0.019 -0.001 0.12
35 16 GENERATED BRITISH
-1.46 BS 5950
2.21 2 2.71 -0.023 -0.001 0.127
36 16 GENERATED BRITISH
-0.57 BS 5950
2.58 2 2.86 -0.024 -0.001 0.134
37 16 GENERATED BRITISH
0.33 BS 5950
2.89 2 2.72 -0.023 -0.001 0.142
38 16 GENERATED BRITISH
1.13 BS 5950
3.14 2 2.32 -0.02 0 0.149
39 16 GENERATED BRITISH
1.77 BS 5950
3.33 2 1.69 -0.014 0 0.154
40 16 GENERATED BRITISH
2.18 BS 5950
3.44 2 0.89 -0.008 0 0.158
-14.64 47.48 0 -2.6E-17 -0.002 2.797
12 16 GENERATED BRITISH
-3.27 BS -0.09
5950 2 0.97 -0.01 0.001 0.112
13 16 GENERATED BRITISH
-2.84 BS -0.56
5950 2 1.78 -0.017 0.001 0.115
14 16 GENERATED BRITISH
-2.19 BS -1.01
5950 2 2.42 -0.022 0.001 0.121
15 16 GENERATED BRITISH
-1.37 BS -1.42
5950 2 2.83 -0.026 0.001 0.129
16 16 GENERATED BRITISH
-0.46 BS -1.79
5950 2 2.96 -0.027 0.001 0.137
17 16 GENERATED BRITISH
0.45 BS -2.11
5950 2 2.81 -0.025 0.001 0.145
18 16 GENERATED BRITISH
1.27 BS -2.36
5950 2 2.39 -0.021 0 0.152
19 16 GENERATED BRITISH
1.91 BS -2.55
5950 2 1.73 -0.016 0 0.158
20 16 GENERATED BRITISH
2.33 BS -2.66
5950 2 0.91 -0.008 0 0.162
21 16 GENERATED BRITISH
2.47 BS 5950
-2.7 2 0 0 0 0.163
22 16 GENERATED BRITISH
2.33 BS -2.66
5950 2 -0.91 0.008 0 0.162
23 16 GENERATED BRITISH
1.91 BS -2.55
5950 2 -1.73 0.016 0 0.158
24 16 GENERATED BRITISH
1.27 BS -2.36
5950 2 -2.39 0.022 0 0.152
25 16 GENERATED BRITISH
0.45 BS -2.11
5950 2 -2.81 0.025 0 0.145
26 16 GENERATED BRITISH
-0.46 BS -1.79
5950 2 -2.96 0.027 0 0.137
27 16 GENERATED BRITISH
-1.37 BS -1.42
5950 2 -2.83 0.026 -0.001 0.129
28 16 GENERATED BRITISH
-2.19 BS -1.01
5950 2 -2.42 0.022 -0.001 0.121
29 16 GENERATED BRITISH
-2.84 BS -0.56
5950 2 -1.78 0.017 -0.001 0.115
30 16 GENERATED BRITISH
-3.27 BS -0.09
5950 2 -0.97 0.01 -0.001 0.112
-5.87 -31.8 -8.9E-16 0.001 0.002 2.625
Project:
Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 2/27/2025
Code EN

Material
Steel S 355, S 275
Concrete C25/30, C35/45

Base plate and Anchor bolts modelled in Idea Statica

considering 50mm ring plate as profile(pipe section)
and net forces(critical load cases) from all support
forces as design forces

1/9
 Weld check for 70x10 flat bar to 50mm ring
Beam End Force Summary plate at base
The signs of the forces at end B of each beam have been reversed. For example: this means that the Min Fx entry gives the largest tension
value for an beam.
Axial Shear Torsion Bending
Beam Node L/C Fx Fy Fz Mx My Mz
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max Fx 84 18 78.07BS 59500.26
13:GENERATED BRITISH 1 0.00 -0.000 -0.000 0.057
Min Fx 100 220 -78.09BS 5950-0.47
14:GENERATED BRITISH 1 0.00 0.000 0.000 0.056
Max Fy 380 220 0.70BS 59500.62
14:GENERATED BRITISH 1 -0.06 -0.001 0.027 0.327
Min Fy 380 260 2.41BS 5950-0.95
18:GENERATED BRITISH 3 0.12 -0.001 0.042 0.091
Max Fz 461 261 0.76BS 5950-0.02
15:GENERATED BRITISH 2 0.30 -0.002 -0.169 -0.007
Min Fz 441 241 0.76BS 5950-0.02
15:GENERATED BRITISH 2 -0.30 0.002 0.169 -0.007
Max Mx 161 101 0.84BS 59500.23
15:GENERATED BRITISH 2 -0.00 0.027 -0.031 0.218
Min Mx 181 81 0.84BS 59500.23
15:GENERATED BRITISH 2 0.00 -0.027 0.031 0.218
Max My 441 241 0.76BS 5950-0.02
15:GENERATED BRITISH 2 -0.30 0.002 0.169 -0.007
Min My 461 261 0.76BS 5950-0.02
15:GENERATED BRITISH 2 0.30 -0.002 -0.169 -0.007
Max Mz 371 211 -1.41BS 59500.52
15:GENERATED BRITISH 2 0.00 0.000 -0.000 0.658
Min Mz 381 221 2.64BS 5950-0.49
16:GENERATED BRITISH 2 -0.00 -0.000 0.000 -0.652
Design check for 70x10mm bar to 50mm ring plate at base

Max joint forces: Max tension &shear Fx=78.1 kN,Fy =0.95 kN,Fz=0.30kN,My=0.20 kN-m,Mz=0.66 kN-m

Considering as line, weld length = 2 x 200 = 400 mm

2 2
Section modulus = 2 x d /6 = 2 x 200 = 13333 mm3
6
Load per mm of weld due to Fx = 78.10 = 0.195 kN/mm
400.0
Load per mm of weld due to Fy = 0.95 = 0.002 kN/mm
400.0
Load per mm of weld due to Fz = 0.30 = 0.001 kN/mm
400.0
3
Load /mm of weld due to Mz = 0.660 x 10 = 0.050 kN/mm
13333
3
Load /mm of weld due to My = 0.200 x 10 = 0.015 kN/mm
13333

Resultant load/mm of weld = √ 0.195 2+ 0.002 2

+ 0.001 2+ 0.050 2+ = 0.202 kN/mm
0.015 2
Provide 8 mm fillet weld , weld strength pw ` = 220.0 N/mm2

Resultant stress on weld = 0.202 x 103 = 36.07 N/mm2

0.7 x 8
< 220.0 N/mm2
Beam End Force Summary Weld check for 70x10 flat bar to SHS 30x30x4
The signs of the forces at end B of each beam have been reversed. For example: this means that the Min Fx entry gives the largest tension
value for an beam.
Axial Shear Torsion Bending
Beam Node L/C Fx Fy Fz Mx My Mz
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max Fx 70 70 7.26BS 5950-0.82
15:GENERATED BRITISH 2 -0.10 -0.024 0.006 0.509
Min Fx 230 150 -5.95BS 59500.01
15:GENERATED BRITISH 2 -0.00 -0.000 0.000 0.017
Max Fy 41 41 5.61BS 5950
15:GENERATED BRITISH 2
10.39 1.32 0.301 -0.025 0.145
Min Fy 60 61 5.61BS 5950
15:GENERATED BRITISH 2
-10.39 -1.32 -0.301 -0.025 0.145
Max Fz 41 41 5.61BS 5950
15:GENERATED BRITISH 10.39
2 1.32 0.301 -0.025 0.145
Min Fz 60 60 5.61BS 5950
15:GENERATED BRITISH -10.39
2 -1.32 -0.301 0.025 -0.246
Max Mx 41 41 5.61BS 5950
15:GENERATED BRITISH 10.39
2 1.32 0.301 -0.025 0.145
Min Mx 60 60 5.61BS 5950
15:GENERATED BRITISH -10.39
2 -1.32 -0.301 0.025 -0.246
Max My 80 41 4.99BS 59508.93
17:GENERATED BRITISH 3 1.11 0.259 0.025 -0.145
Min My 498 260 0.83BS 5950-0.31
13:GENERATED BRITISH 1 -0.52 0.035 -0.065 0.022
Max Mz 43 43 1.37BS 59503.99
16:GENERATED BRITISH 2 0.51 0.115 -0.006 0.573
Min Mz 48 49 4.31BS 59503.99
15:GENERATED BRITISH 2 0.51 0.115 0.006 -0.578
Design check for 70x10mm bar to SHS 30x30x4

Max joint forces: Max tension & shear Fx=7.3 kN,Fy =0.82 kN,Fz=0.1 kN,Mz=0.51 kN-m

Available weld length = 16 x 2+ 30 x 2 = 92 mm

Treating weld as a line,section modulus of weld, Zw = bd+d2/3 = 1260 mm3

b= 16 mm
d= 30 mm
Load per mm of weld due to Fx = 7.3 = 0.079 kN/mm
92
Load per mm of weld due to Fy = 0.82 = 0.01 kN/mm
92
Load per mm of weld due to Fz = 0.1 = 0.001 kN/mm
92
3
Load per mm of weld due to Mz = 0.51 x 10 = 0.40 kN/mm
1260

2 2 2
Resultant load /mmper bolt
of weld =√ 0.079 + 0.01 + 0.001 + = 0.412 kN/mm
2
0.40

2
Providing 4 mm Fillet weld with maximum permissible stress pw = 220.0 N/mm
BS 5950: cl 6.8.5,T-37

Capacity of 6mm fillet weld = 0.7 x 4 x 220.0 = 0.616 kN/mm

BS 5950: cl 6.8.7

> 0.412 kN/mm Hence safe

 UnFactored Load cases for
Reaction Summary Foundation design
Horizontal Vertical Horizontal Moment
Node L/C FX FY FZ MX MY MZ
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max FX 16 2.21BS 5950-0.81
22:GENERATED BRITISH 2 -0.23 -0.101 -0.000 0.022
Min FX 11 -2.44BS 59500.51
23:GENERATED BRITISH 2 0.11 -0.003 0.001 0.079
Max FY 31 0.08BS 59502.98
31:GENERATED BRITISH 3 1.54 -0.112 0.000 -0.001
Min FY 21 1.82BS 5950-1.70
23:GENERATED BRITISH 2 -0.00 0.000 0.000 0.118
Max FZ 16 -0.29BS 5950-1.06
23:GENERATED BRITISH 2 2.15 -0.020 0.000 0.099
Min FZ 40 0.38BS 59501.10
31:GENERATED BRITISH 3 -2.73 -0.080 0.000 -0.025
Max MX 26 -0.29BS 5950-1.06
23:GENERATED BRITISH 2 -2.15 0.020 -0.000 0.099
Min MX 11 0.00BS 5950-1.45
22:GENERATED BRITISH 2 1.90 -0.120 0.000 0.000
Max MY 1 -0.47BS 59500.32
31:GENERATED BRITISH 3 -2.57 -0.085 0.018 -0.042
Min MY 3 -0.37BS 59500.20
21:GENERATED BRITISH 1 0.11 0.001 -0.015 -0.043
Max MZ 21 1.82BS 5950-1.70
23:GENERATED BRITISH 2 -0.00 0.000 0.000 0.118
Min MZ 3 -1.63BS 5950-0.36
31:GENERATED BRITISH 3 -1.93 -0.082 -0.015 -0.055

Considering the criitcal load cases from reaction summary,

support reactions for all support joints are considered and
net forces (with net tension and compression as separate
load cases as per comments) are considered for verification
of base plate and anchor bolts
 Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm Mz kNm
1 31 GENERATED BRITISH
-0.47 BS 5950
0.32 3 -2.57 -0.085 0.018 -0.042
19 31 GENERATED BRITISH
1.33 BS 59500.1 3 -2.01 -0.083 0 0.012
20 31 GENERATED BRITISH
0.75 BS 5950
0.44 3 -2.32 -0.08 0 0.007
21 31 GENERATED BRITISH
0.12 BS 5950
0.78 3 -2.43 -0.079 0 0.002
22 31 GENERATED BRITISH
-0.52 BS 5950
1.13 3 -2.35 -0.079 0 -0.004
23 31 GENERATED BRITISH
-1.1 BS 5950
1.46 3 -2.07 -0.082 0 -0.009
24 31 GENERATED BRITISH
-1.56 BS 5950
1.78 3 -1.62 -0.085 0 -0.013
25 31 GENERATED BRITISH
-1.86 BS 5950
2.08 3 -1.06 -0.09 0 -0.016
26 31 GENERATED BRITISH
-1.97 BS 5950
2.34 3 -0.44 -0.095 0 -0.017
27 31 GENERATED BRITISH
-1.87 BS 5950
2.56 3 0.19 -0.1 0 -0.016
28 31 GENERATED BRITISH
-1.58 BS 5950
2.74 3 0.75 -0.105 0 -0.014
29 31 GENERATED BRITISH
-1.13 BS 5950
2.87 3 1.19 -0.109 0 -0.011
30 31 GENERATED BRITISH
-0.55 BS 5950
2.95 3 1.46 -0.111 0 -0.006
31 31 GENERATED BRITISH
0.08 BS 5950
2.98 3 1.54 -0.112 0 -0.001
32 31 GENERATED BRITISH
0.71 BS 5950
2.96 3 1.41 -0.111 0.001 0.004
33 31 GENERATED BRITISH
1.27 BS 5950
2.88 3 1.09 -0.109 0.001 0.008
34 31 GENERATED BRITISH
1.71 BS 5950
2.75 3 0.59 -0.105 0.001 0.011
35 31 GENERATED BRITISH
1.97 BS 5950
2.57 3 -0.03 -0.1 0.001 0.013
36 31 GENERATED BRITISH
2.03 BS 5950
2.36 3 -0.71 -0.095 0.002 0.013
37 31 GENERATED BRITISH
1.87 BS 5950
2.12 3 -1.41 -0.09 0.002 0.012
38 31 GENERATED BRITISH
1.48 BS 5950
1.85 3 -2.05 -0.085 0.003 0.008
39 31 GENERATED BRITISH
0.93 BS 5950
1.53 3 -2.53 -0.081 0.002 -0.002
40 31 GENERATED BRITISH
0.38 BS 59501.1 3 -2.73 -0.08 0 -0.025
2.02 44.65 -18.11 -2.151 0.031 -0.086
2 31 GENERATED BRITISH
-0.5 BS -0.11
5950 3 -1.99 -0.071 0.003 -0.022
3 31 GENERATED BRITISH
-1.63 BS -0.36
5950 3 -1.93 -0.082 -0.015 -0.055
4 31 GENERATED BRITISH
-1.77 BS -0.28
5950 3 -1.13 -0.092 0.002 -0.044
5 31 GENERATED BRITISH
-2.06 BS -0.46
5950 3 -0.45 -0.093 0 -0.029
6 31 GENERATED BRITISH
-2.08 BS -0.71
5950 3 0.14 -0.097 -0.001 -0.025
7 31 GENERATED BRITISH
-1.91 BS -0.95
5950 3 0.69 -0.103 -0.001 -0.023
8 31 GENERATED BRITISH
-1.59 BS -1.15
5950 3 1.18 -0.108 0 -0.019
9 31 GENERATED BRITISH
-1.11 BS -1.29
5950 3 1.58 -0.112 0 -0.015
10 31 GENERATED BRITISH
-0.53 BS -1.38
5950 3 1.82 -0.115 0 -0.009
11 31 GENERATED BRITISH
0.11 BS -1.41
5950 3 1.88 -0.116 0 -0.003
12 31 GENERATED BRITISH
0.75 BS -1.38
5950 3 1.75 -0.115 0.001 0.003
13 31 GENERATED BRITISH
1.32 BS -1.31
5950 3 1.43 -0.113 0.001 0.009
14 31 GENERATED BRITISH
1.78 BS -1.18
5950 3 0.95 -0.109 0.001 0.013
15 31 GENERATED BRITISH
2.07 BS 5950 -1 3 0.36 -0.104 0.001 0.016
16 31 GENERATED BRITISH
2.17 BS -0.77
5950 3 -0.29 -0.099 0 0.018
17 31 GENERATED BRITISH
2.07 BS -0.51
5950 3 -0.95 -0.093 0 0.017
18 31 GENERATED BRITISH
1.78 BS -0.22
5950 3 -1.54 -0.088 0 0.015
-1.13 -14.47 3.5 -1.71 -0.008 -0.153

Horizontal Vertical Horizontal Moment

Node L/C Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm Mz kNm
 1 23 GENERATED BRITISH
1.61 BS 5950
2.71 2 0 0 0 0.112
2 23 GENERATED BRITISH
1.5 BS 5950
2.68 2 -0.63 0.005 0 0.111
3 23 GENERATED BRITISH
1.21 BS 5950
2.6 2 -1.19 0.01 0 0.109
4 23 GENERATED BRITISH
0.76 BS 5950
2.47 2 -1.63 0.014 0 0.105
5 23 GENERATED BRITISH
0.19 BS 5950
2.29 2 -1.91 0.016 0 0.1
6 23 GENERATED BRITISH
-0.44 BS 5950
2.07 2 -2 0.016 0 0.095
7 23 GENERATED BRITISH
-1.07 BS 5950
1.8 2 -1.89 0.015 0 0.09
8 23 GENERATED BRITISH
-1.64 BS 5950
1.51 2 -1.59 0.012 0 0.085
9 23 GENERATED BRITISH
-2.08 BS 5950
1.19 2 -1.12 0.008 0.001 0.081
10 23 GENERATED BRITISH
-2.36 BS 5950
0.85 2 -0.54 0.003 0.001 0.079
11 23 GENERATED BRITISH
-2.44 BS 5950
0.51 2 0.11 -0.003 0.001 0.079
12 23 GENERATED BRITISH
-2.32 BS 5950
0.16 2 0.75 -0.008 0.001 0.08
30 23 GENERATED BRITISH
-2.32 BS 5950
0.16 2 -0.75 0.008 -0.001 0.08
31 23 GENERATED BRITISH
-2.44 BS 5950
0.51 2 -0.11 0.003 -0.001 0.079
32 23 GENERATED BRITISH
-2.36 BS 5950
0.85 2 0.54 -0.003 -0.001 0.079
33 23 GENERATED BRITISH
-2.08 BS 5950
1.19 2 1.12 -0.008 -0.001 0.081
34 23 GENERATED BRITISH
-1.64 BS 5950
1.51 2 1.59 -0.012 -0.001 0.085
35 23 GENERATED BRITISH
-1.07 BS 5950
1.8 2 1.89 -0.015 0 0.09
36 23 GENERATED BRITISH
-0.44 BS 5950
2.07 2 2 -0.016 0 0.095
37 23 GENERATED BRITISH
0.19 BS 5950
2.29 2 1.91 -0.016 0 0.1
38 23 GENERATED BRITISH
0.76 BS 5950
2.47 2 1.63 -0.013 0 0.105
39 23 GENERATED BRITISH
1.21 BS 5950
2.6 2 1.19 -0.01 0 0.109
40 23 GENERATED BRITISH
1.5 BS 5950
2.68 2 0.63 -0.005 0 0.111
-15.77 38.97 0 0.001 -0.001 2.14
13 23 GENERATED BRITISH
-2.01 BS -0.18
5950 2 1.32 -0.013 0.001 0.083
14 23 GENERATED BRITISH
-1.54 BS 5950
-0.5 2 1.78 -0.017 0.001 0.087
15 23 GENERATED BRITISH
-0.94 BS -0.79
5950 2 2.06 -0.02 0 0.093
16 23 GENERATED BRITISH
-0.29 BS -1.06
5950 2 2.15 -0.02 0 0.099
17 23 GENERATED BRITISH
0.36 BS -1.28
5950 2 2.04 -0.019 0 0.105
18 23 GENERATED BRITISH
0.95 BS -1.46
5950 2 1.73 -0.016 0 0.11
19 23 GENERATED BRITISH
1.42 BS -1.59
5950 2 1.25 -0.012 0 0.114
20 23 GENERATED BRITISH
1.72 BS -1.67
5950 2 0.66 -0.006 0 0.117
21 23 GENERATED BRITISH
1.82 BS 5950
-1.7 2 0 0 0 0.118
22 23 GENERATED BRITISH
1.72 BS -1.67
5950 2 -0.66 0.006 0 0.117
23 23 GENERATED BRITISH
1.42 BS -1.59
5950 2 -1.25 0.012 0 0.114
24 23 GENERATED BRITISH
0.95 BS -1.46
5950 2 -1.73 0.016 0 0.11
25 23 GENERATED BRITISH
0.36 BS -1.28
5950 2 -2.04 0.019 0 0.105
26 23 GENERATED BRITISH
-0.29 BS -1.06
5950 2 -2.15 0.02 0 0.099
27 23 GENERATED BRITISH
-0.94 BS -0.79
5950 2 -2.06 0.02 0 0.093
28 23 GENERATED BRITISH
-1.54 BS 5950
-0.5 2 -1.78 0.017 0 0.087
29 23 GENERATED BRITISH
-2.01 BS -0.18
5950 2 -1.32 0.013 -0.001 0.083
1.16 -18.76 1.78E-15 0 0.001 1.734
 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Column Base Design :

C15
Input Data

Base length A (m) 1.59 *

Base width B (m) 1.59
Foundation Size - Dia 2.25 x 0.6m
Columns Col 1 Col 2
C (m) 1
Grade - C40
D (m) 1 SBC - 200 kN/m2 ;(as per provided Soil
E (m) Report - relevant pages attached for
F (m)
reference)
Stub column height X (m) 0
Base depth Y (m) .6
*
Soil cover Z (m) 0 Reinforcement details :
Concrete density (kN/m3) 25
Soil density (kN/m3) 18
Foundation : Provide Y16 @ 200mm c/c
Soil friction angle (°) 10
Base friction constant 0.4 @ top & bottom both directions
Rebar depth top X (mm) 50
Rebar depth top Y (mm) 50
Rebar depth bottom X (mm) 50
Rebar depth bottom Y (mm) 50
ULS ovt LF: Self weight 1.0
ULS LF: Self weight 1.0
Max. SLS bearing pr. (kN/m2) 200
ULS SF Overturning 1.5
ULS SF Slip 1.5
fcu base (MPa) 19
fcu columns (MPa) 30.0
fy (MPa) 450

*
Due to program limitations, conservatively, a square section of
1,59m x 1.59m is verified with the max design forces
 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Loading Data Foundation modelled in Prokon considering net forces(critical

load cases) from all support forces as design forces
Unfactored loads

Column LF LF P Hx Hy Mx My
Load Case: Number ULS ULS (kN) (kN) (kN) (kNm) (kNm)
ovt

1 1 1 1 44.65 2 18 2.15 0
2 1 1 1 -14.5 1.2 3.5 2 .2
3 1 1 1 39 15.8 0 0 2.2
4 1 1 1 -18.8 1.2 0 0 1.8

Sketch of Base
BS8110 - 1997 Y

X
B

A
Y

Hx X
Z

Output for Load Case 1

Note: The calculated flexural reinforcement was used in the calculations.
 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Output for Load Case 1

Soil pressure (ULS) (kN/m2) 53.78
Soil pressure (SLS) (kN/m2) 53.78
SF overturning (ULS) 5.81
SF overturning (SLS) 5.81
Safety Factor slip (ULS) 2.27
Safety Factor slip (SLS) 2.27
Bottom
Design moment X (kNm/m) 0.96
Reinforcement X (mm2/m) 5
Design moment Y (kNm/m) 1.38
Reinforcement Y (mm2/m) 7
Top
Design moment X (kNm/m) 0.00
Reinforcement X (mm2/m) 0
Design moment Y (kNm/m) 0.00
Reinforcement Y (mm2/m) 0
Linear Shear X (MPa) 0.000
vc (MPa) 0.336
Linear Shear Y (MPa) 0.000
vc (MPa) 0.336
Linear Shear Other (MPa) 0.000
Punching Shear (MPa) N.A.
vc (MPa) N.A.
vcu (MPa) 3.49
v col face (MPa) 0.02
Cost 0.00

Load Case:1 Legend

Max M (+)
BS8110 - 1997 Y Y Max M (-)
Max Shear

X X
1.59

1.59

1.59 1.59
Y Y
0.00

0.00

Hx 0.00 Hx 0.00
0.60 0.60

53.78 kN/m^2 53.78 kN/m^2

Soil Pressures at SLS Soil Pressures at ULS

Reinforcement Calculation for X-direction:Positive Moments

Load Case: 1

Design moment:0.96 kNm/m

 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Calculation of the maximum steel strain:

fst
est =
Es
391.3
=
200000
= 0.0020

Balanced neutral axis

d
xb =
est
1+
ec
550
=
.00196
1+
.0035
= 352.564 mm

%redis
bb = 1 -
100
0
=1 -
100
= 1.0000

Maximum allowed neutral axis depth: 3.2.2.1

x = min(d/(1+est/ec) , (b b-0.4)*d) = 352.789 mm

Depth of rectangular stress block:

a = b. x
= .9 ×275
= 247.500 mm

Concrete moment capacity: 3.4.4.4

 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

a . . . . .
Mu = a . d - b a f fcu 1×10-6
2
247.5
= 247.5 × 550 - ×1000 ×.66667 ×.66667 ×19 ×1×10-6
2
= 890.871 kNm

Lever arm 3.4.4.4

M
z = d . 0.5 + 0.25 -
2 a f b . d 2 . fcu
. . .

959107
= 550 × 0.5 + 0.25 -
2 ×.66667 ×.66667 ×1000 ×550 2 ×19
= 549.897 mm

Lever arm limitation 3.4.4.4

z = min(549.897 , 0.95*550.000) = 522.500 mm

Tension steel 3.4.4.4

M
Ast =
fst . z
959107
=
391.3 ×522.5
= 4.691 mm2

Neutral axis depth 3.4.4.4

2 . (d - z)
NA =
b
2 ×(550 - 522.5 )
=
.9
= 61.111 mm

Reinforcement Calculation for Y-direction:Positive Moments

Load Case: 1

Design moment:1.38 kNm/m

Calculation of the maximum steel strain:

 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

fst
est =
Es
391.3
=
200000
= 0.0020

Balanced neutral axis

d
xb =
est
1+
ec
550
=
.00196
1+
.0035
= 352.564 mm

%redis
bb = 1 -
100
0
=1 -
100
= 1.0000

Maximum allowed neutral axis depth: 3.2.2.1

x = min(d/(1+est/ec) , (b b-0.4)*d) = 352.789 mm

Depth of rectangular stress block:

a = b. x
= .9 ×275
= 247.500 mm

Concrete moment capacity: 3.4.4.4

 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

a . . . . .
Mu = a . d - b a f fcu 1×10-6
2
247.5
= 247.5 × 550 - ×1000 ×.66667 ×.66667 ×19 ×1×10-6
2
= 890.871 kNm

Lever arm 3.4.4.4

M
z = d . 0.5 + 0.25 -
2 a f b . d 2 . fcu
. . .

1383×103
= 550 × 0.5 + 0.25 -
2 ×.66667 ×.66667 ×1000 ×550 2 ×19
= 549.851 mm

Lever arm limitation 3.4.4.4

z = min(549.851 , 0.95*550.000) = 522.500 mm

Tension steel 3.4.4.4

M
Ast =
fst . z
1383×103
=
391.3 ×522.5
= 6.764 mm2

Neutral axis depth 3.4.4.4

2 . (d - z)
NA =
b
2 ×(550 - 522.5 )
=
.9
= 61.111 mm

Punching Shear Stress/Reinforcement Calculation

Load Case: 1

Column number:1
 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Shear Stress/Reinforcement Calculation for Y-direction

Load Case: 1

Design shear force:0.00 kN

Based on flexural reinforcement of: 7 mm^2/m

Shear Calculations:
Area used for shear calculations:
3.4.5.4-6

Ash = bw . de - (bw - bf ) . bf
= 1000 ×550 - (1000 - 0 ) ×0
= 550.0×103 mm2

Reinforcement ratio 3.4.5.4-6

Ast
F1 =
Ash
6.7644
=
550000
= 12.299×10-6

3.4.5.4-6

f1 = f1i . 100
= .00001 ×100
= 0.0010

F1 = min(3 , F1) = 0.001

F1 = max(0.15 , F1) = 0.150 3.4.5.4-6

3.4.5.4-6

f2 = 1

3.4.5.4-6

0.79 . 0.33333 . 0.25

vc = F1 F2
1.25
0.79
= ×.15 0.33333 ×1 0.25
1.25
= 0.3358 MPa
 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

F3 = 1

vc = vc1 . F3
= .3358 ×1
= 0.3358 MPa

Maximum allowable shear stress

3.4.5.4-6

vcu = 0.8 . fcu

= 0.8 × 19
= 3.487 MPa

vcu = min(5 , vcu) = 3.487

Actual Shear stress:

V . 1×103
v=
Ash
0 ×1×103
=
550000
= 0.0000×100 MPa

Shear force capacity

Vco = vc . Ash . 1×10-3

= .3358 ×550000 ×1×10-3
= 184.690 kN

Shear reinforcement Table 3.16

(v - vc) . b
Asv/sv =
0.95 . fyv
(0 - .3358 ) ×1000
=
0.95 ×450
= -0.7855

Minimum links Table 3.16

 Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

0.40 . b
Asv/svn =
0.95 . fyv
0.40 ×1000
=
0.95 ×450
= 0.9357
 The allowable bearing pressure was determined using the bearing capacity equation of Meyerhof’s, utilizing the results of Standard Penetration Test
results (SPT) and Unconfined Compressive Strength test (UCS), and considered factor of safety of three (F.S. = 3.0) for soil and six (F.S. = 6.0) in rock
layer against shear failure. Accordingly, the allowable bearing pressure shown in Table 8 is recommended and should not be exceeded.

Table 8: Recommended Allowable Bearing Pressure

Allowable Bearing Modulus of Sub-
Settlement
Pressure grade Reaction
Ground Foundation Foundation Factor (kPa) (kPa/m) (mm)
Borehole Foundation Foundation
Location/ Level Depth Level of Dimension (m) Dimension (m) Dimension (m)
Number Ground Type
Structure Type (m) NADD (m) BEGL (m) NADD Safety Isolated/Strip Isolated/Strip Isolated/Strip
3.0 x 4.0 3.0 x 4.0 3.0 x 4.0
Calcareous Isolated/Strip
350 84000 20.38
SANDSTONE Footing
- BH 01 and BH 02 2.10 1.5 0.60 6.0
and
Raft 350 42000 46.44
CALCARENITE
BH 03, BH 04, BH-05, BH-06, BH- Calcareous Isolated/Strip
Souk Al Jubail- 350 84000 22.74
07, BH 08, BH-09, BH-11, BH-12, SANDSTONE Footing
Town Center 2.10 1.5 0.60 6.0
BH-20, BH-22, BH-23, BH-24 and and
(Block B) Raft 350 42000 46.97
BH-25 CALCARENITE
Calcareous Isolated/Strip
Souk Al Jubail- BH-13, BH-14, BH-15, BH-16, BH- 350 84000 21.11
SANDSTONE Footing
Town Center 17, BH 18, BH-19, BH-26, BH-27, 2.10 1.5 0.60 6.0
and
(Block A) BH-28, BH-29, BH-30 and BH-31 Raft 350 42000 47.50
CALCARENITE
Calcareous Isolated/Strip
350 84000 23.65
SANDSTONE Footing
2-CO-008 BH 32 2.46 1.5 0.96 6.0
and
Raft 350 42000 38.00
CALCARENITE
Isolated/Strip
300 36000 21.12
2-RE-001 BH-33, BH-34 and BH-35 2.10 1.5 0.60 SAND with silt Footing 3.0
Raft 300 18000 27.17
Isolated/Strip
130 15600 22.75
Footing
2-AP-005 BH-36, BH-37 and BH-38 2.10 1.5 0.60 SAND with silt 3.0
Raft 100 7200 42.29
Calcareous Isolated/Strip
BH-39, BH-40, BH-41, BH-42, BH- 350 84000 21.50
Boulevard SANDSTONE Footing
43, BH-45, BH-49, BH-50, BH-51 2.09 1.5 0.59 6.0
Retail Park and
and BH-52 Raft 330 39600 49.26
CALCARENITE
Isolated/Strip
220 26400 24.93
2-CO-005 BH 46, BH 47 and BH 48 2.10 1.5 0.60 SAND with silt Footing 3.0
Raft 220 13200 49.47
Isolated/Strip
180 21600 23.89
2-CO-006 BH 53 and BH 54 2.10 1.5 0.60 SAND with silt Footing 3.0
Raft 220 13200 48.24

Note (1) After excavation completion and prior to foundation installation, the ground should be proof rolled by a suitable compactor to
achieve dry density of not less than 95% as the maximum dry density obtained laboratory compaction.
(2) The adopted foundation settlement tolerance of 25mm in Isolated/Strip Footing and for 50mm for Raft Foundation.
(3) Assumed raft dimension 10.0m x 15.0m.

27 AUH.20.SI.09/1 Rev. (3)