TP540HG10TB[GLASS-TRANSPARENT BACK SHEET]
MONO PERC BIFACIAL HIGH EFFICIENCY SOLAR MODULE
PRODUCT SPECIAL FEATURES
144 Cells configuration with wattage ranging from Torsion and corrosion resistant with
500W to 555W anodized Aluminium frame
High fill factor for improved energy conversion Unique back sheet design for high resistance to moisture
efficiency ingress
Cell sorted by power and current to minimize mismatch Enhanced reliability through use of distinctive encapsulant
losses in the field and back sheet
Electroluminescence tested for micro cracks Ultra- soft interconnect with stress relief for enhanced
reliability
Highly reliable IP68 rated junction box with 3 no's of
low forward voltage Schottky Diodes Optimized edge clearance for high quality
rugged design
MC4/MC4 compatible cable connectors
CERTIFICATION
WARRANTY
Product warranty :10 years warranty on material and workmanship
Power warranty : 25 years linear power output warranty
Warranties are subject to the terms and conditions as per the TP solar warranty document. Certification may vary by module type
Thermography data shall not be considered to decide module quality unless it is tested and certified by TP solar.
500 505 510 515 520 525 530 535 540 545 550 555
Electrical parameters at standard test conditions (STC)*
Nominal power output (W)** 500 505 510 515 520 525 530 535 540 545 550 555
Power tolerance (W) 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 1 ~ +5
Module efficiency (ŋ%) 19.40 19.59 19.79 19.98 20.17 20.37 20.56 20.76 20.95 21.14 21.34 21.53
Voltage at Pmax VMPP (V) 41.10 41.25 41.40 41.55 41.70 42.00 42.20 42.35 42.45 42.55 42.62 42.69
Current at Pmax IMPP (A) 12.17 12.24 12.32 12.39 12.47 12.50 12.56 12.63 12.72 12.81 12.90 13.00
Open-circuit voltage VOC (V) 48.80 48.85 48.90 49.05 49.15 49.20 49.30 49.40 49.50 49.60 49.75 49.82
Short-circuit current ISC (A) 13.04 13.05 13.06 13.08 13.09 13.12 13.13 13.20 13.23 13.32 13.42 13.52
Electrical parameters at 10% solar Irradiance ratio-*C
Nominal power output @BSTC (W) 547 553 558 564 569 575 580 586 591 597 602 607
Voltage at Pmax VMPP (V) 42.57 42.68 42.79 42.88 42.98 43.08 43.18 43.28 43.38 43.48 43.58 43.68
Current at Pmax IMPP (A) 12.86 12.95 13.04 13.15 13.24 13.34 13.43 13.53 13.62 13.72 13.81 13.91
Open-circuit voltage VOC (V) 49.62 49.76 49.90 50.04 50.18 50.32 50.46 50.60 50.74 50.88 51.02 51.16
Short-circuit current ISC (A) 13.65 13.71 13.78 13.84 13.90 13.97 14.03 14.08 14.14 14.20 14.26 14.31
Electrical parameters at NOCT
Power output PMAX (W) 360 364 367 371 374 378 382 385 389 392 396 400
Voltage at PMAX VMPP (V) 36.2 36.3 36.4 36.6 36.7 37.0 37.1 37.3 37.4 37.4 37.5 37.6
Current at PMAX IMPP (A) 9.96 10.01 10.08 10.14 10.20 10.23 10.27 10.33 10.41 10.48 10.56 10.63
Open-circuit voltage VOC (V) 42.9 43.0 43.0 43.2 43.3 43.3 43.4 43.5 43.6 43.6 43.8 43.8
Short-circuit current ISC (A) 10.68 10.69 10.69 10.71 10.72 10.75 10.75 10.81 10.84 10.91 10.99 11.07
Temperature coefficient Characteristics TECHNICAL DIMENSIONS [In mm]
NOCT( ᵒ C) 45±1
Module efficiency (% / °C) -0.06 ± 0.01
Temperature Coefficient of Pmax (% / ᵒC) -0.36
Temperature coefficient of Voc (% / ᵒC) -0.28
Temperature coefficient of Isc (% / ᵒC) 0.05
Operating conditions
Maximum system voltage (V) 1500
Application class A
Maximum series fuse rating (A) 25
Limited reverse current (A) 25
Operating temperature range ( ᵒC) -40 to +85
Maximum static load (Wind/Snow) pa 2400/5400
Module general characteristics
Module dimensions L X W X H(mm)*** 2278 x1134 x 35
Module weight (approx.) (Kg) 29±1
No of cells &size 144 Nos/[182 x91]mm
Frame materials Anodized Aluminium
2278
Front Glass / Back 2mm glass / Clear sheet
Junction box IP68
Cable connector MC4/MC4 Compatible
Packaging details
No of modules per pallet 31
No of Boxes per 40ft Container 20
Box weight (Kg) 1000
Box dimensions L X W X H(mm)**** 2337 x1145x1290
Testing and tolerances
*Irradiance of 1000w/m²,Spectrum of AM 1.5 and Cell temperature of 25 ºC.
** Measurement tolerance on Pmax±3%.
*C-Bifcial power output depends on plant location and albedo
a] Tolerance for dimensions±3mm and Tolerance for cable length 0/+50mm.
b] Bifacial factor [70±10]%
c] Frame : Lock Type-30mm/35mm
d] Box dimensions are subject to
change
Listed specifications are subject to
change with out prior notice.
Rev0
