Company name:

Created by:
Phone:

Date: 16/01/2025
Qty. Description
1 NK 50-160/167 AA1F2KESBQQENW1

Note! Product picture may differ from actual product

Product No.: On request

Non-self-priming, single-stage, centrifugal pump designed according to ISO 5199 with dimensions and rated
performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-1. The pump has an
axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the
motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.
The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common
base frame.
The product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the Commission Regulation (EU)
considered as an indicative benchmark for best-performing water pump available on the market as from 1 January
2013.
Pump and motor are mounted on a common steel base frame in accordance with ISO 3661. The back pull-out design
makes it possible to service the pump when the pump housing is still connected to the inlet and discharge pipes.

1) Remove the bolts in the bearing bracket support foot and motor foot.
2) Remove the bearing bracket and the motor from the pump housing.

Pump
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the spring and around the
bellows. Due to the bellows, the seal does not wear the shaft, and the axial movement is not prevented by deposits
on the shaft.

Seal faces:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing
offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft is made of stainless steel and has a diameter of 24 mm where the coupling is mounted.
The pump uses a standard coupling between the pump and motor shaft.

Printed from Grundfos Product Centre [2025.02.005] 1/13

 Company name:
Created by:
Phone:

Date: 16/01/2025
Qty. Description
1

The language on the pump nameplate is English.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. Electrical
tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The protection
reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset
cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local
regulations.

Further product details

Technical data

Controls:
Frequency converter: None
Pressure sensor: N

Liquid:
Pumped liquid: Water
Liquid temperature range: -25 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s

Technical:
Pump speed on which pump data are based: 2955 rpm
Actual calculated flow: 81.5 m³/h
Pump with motor (Yes/No): Y
Resulting head of the pump: 35 m
Actual impeller diameter: 167 mm
Nominal impeller diameter: 160
Code for shaft seal: BQQE
Mechanical seal type: Single
Curve tolerance: ISO9906:2012 3B
Bearing design: Standard

Materials:
Pump housing: Stainless steel
EN 1.4408
ASTM CF8M
Wear ring: Stainless steel
Impeller: Stainless steel
EN 1.4408
ASTM CF8M
Internal pump house coating: No coating
Shaft: Stainless steel

Printed from Grundfos Product Centre [2025.02.005] 2/13

 Company name:
Created by:
Phone:

Date: 16/01/2025
Qty. Description
1 EN 1.4401
AISI 316

Installation:
Maximum ambient temperature: 55 °C
Maximum operating pressure: 16 bar
Pipe connection standard: EN 1092-1
Type of inlet connection: DIN
Type of outlet connection: DIN
Size of inlet connection: DN 65
Size of outlet connection: DN 50
Pressure rating for connection: PN 16
Coupling type: Flexible w/o spacer
Base frame design: EN/ISO
Code for base frame: 6B ST
Grouting (Yes/No): N

Electrical data:
Motor type: INNOMOTICS_SIEMENS
Rated power - P2: 11 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 19.6/11.3 A
Starting current: 790 %
Cos phi - power factor: 0.89
Rated speed: 2955 rpm
IE efficiency: IE3 91,2%
IE Efficiency class: IE3
Motor efficiency at full load: 91.2 %
Motor efficiency at 3/4 load: 91.0 %
Motor efficiency at 1/2 load: 89.5 %
Number of poles: 2
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor No: 98943352
Bearing insulation type N-end: Steel Bearing

Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 203 kg
Gross weight: 218 kg
Shipping volume: 0.492 m³
Language on pump nameplate: GB

Printed from Grundfos Product Centre [2025.02.005] 3/13

 Company name:
Created by:
Phone:

Date: 16/01/2025

On request NK 50-160/167 AA1F2KESBQQENW1 50 Hz

H NK 50-160/167, 50Hz eta
[m] [%]

40 167 mm

35

30

25 100

20 80

15 60

10 40

5 20

0 0
0 10 20 30 40 50 60 70 80 90 100 Q [m³/h]
Q = 81.5 m³/h H = 35 m
Pumped liquid = Water Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³ Eta pump = 80.2 %
Eta pump+motor = 73.1 %
P NPSH
[kW] [m]

12 P1 30

P2
10 25

8 20

6 15

4 10

2 5

0 0
P1 = 10.74 kW
P2 = 9.789 kW
NPSH = 3.38 m

Printed from Grundfos Product Centre [2025.02.005] 4/13

 Company name:
Created by:
Phone:

Date: 16/01/2025
H NK 50-160/167, 50Hz eta
Description Value [m] [%]
General information:
Product name: NK 50-160/167 40 167 mm
AA1F2KESBQQENW1
Product No: On request 35

EAN number: On request 30

Technical:
Pump speed on which pump data 25 100
2955 rpm
are based:
20 80
Actual calculated flow: 81.5 m³/h
Pump with motor (Yes/No): Y 15 60
Resulting head of the pump: 35 m
10 40
Actual impeller diameter: 167 mm
Nominal impeller diameter: 160 5 20
Shaft diameter: 24 mm
0 0
Code for shaft seal: BQQE 0 20 40 60 80 Q [m³/h]
Mechanical seal type: Single Q = 81.5 m³/h H = 35 m
Pumped liquid = Water Density = 998.2 kg/m³
Curve tolerance: ISO9906:2012 3B
Eta pump = 80.2 % Eta pump+motor = 73.1 %
Pump version: A1 Liquid temperature during operation = 20 °C
Bearing design: Standard P NPSH
[kW] P1 [m]
Materials:
Pump housing: Stainless steel 10 P2 25

Pump housing: EN 1.4408 8 20

Pump housing: ASTM CF8M 6 15
Wear ring: Stainless steel
4 10
Impeller: Stainless steel
2 5
Impeller: EN 1.4408
0 0
Impeller: ASTM CF8M
P1 = 10.74 kW
Internal pump house coating: No coating P2 = 9.789 kW
Material code: K NPSH = 3.38 m
490
540

430

205 765
1175
245
80

4
x
24
60
180

482

65

4
x
19

4
x
19
50
100 1178.5

Code for rubber: E

Shaft: Stainless steel
1178.5
Shaft: EN 1.4401 100 100 50
4 x 19

Shaft: AISI 316

Installation: 4 x 19
180
65

Maximum ambient temperature: 55 °C

482

Maximum operating pressure: 16 bar

245
80

Pipe connection standard: EN 1092-1 60

Type of inlet connection: DIN 4 x 24

Type of outlet connection: DIN

Size of inlet connection: DN 65
430

490

540

Size of outlet connection: DN 50

Pressure rating for connection: PN 16 205 765 205

1175

Coupling type: Flexible w/o spacer

Base frame design: EN/ISO
Code for base frame: 6B ST
Grouting (Yes/No): N
Connect code: F
Liquid: +T +T +T

Pumped liquid: Water

Liquid temperature range: -25 .. 120 °C
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE

Selected liquid temperature: 20 °C TO AMPLIFIER

RELAY

Density: 998.2 kg/m³ L1 L2 L3

Kinematic viscosity: 1 mm2/s

THERMISTORS PTC ACCORDING TO DIN 44082

Electrical data:
+T +T +T
Motor type: INNOMOTICS_SIEMENS
Rated power - P2: 11 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V TO AMPLIFIER
RELAY
L1 L2 L3

Printed from Grundfos Product Centre [2025.02.005] 5/13

 Company name:
Created by:
Phone:

Date: 16/01/2025

Description Value
Rated current: 19.6/11.3 A
Starting current: 790 %
Cos phi - power factor: 0.89
Rated speed: 2955 rpm
IE efficiency: IE3 91,2%
IE Efficiency class: IE3
Motor efficiency at full load: 91.2 %
Motor efficiency at 3/4 load: 91.0 %
Motor efficiency at 1/2 load: 89.5 %
Number of poles: 2
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Built-in motor protection: PTC
Motor No: 98943352
Bearing insulation type N-end: Steel Bearing
Controls:
Frequency converter: None
Pressure sensor: N
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 203 kg
Gross weight: 218 kg
Shipping volume: 0.492 m³
Language on pump nameplate: GB

Printed from Grundfos Product Centre [2025.02.005] 6/13

 Company name:
Created by:
Phone:

Date: 16/01/2025

On request NK 50-160/167 AA1F2KESBQQENW1 50 Hz

180 245

80
19
4 x
50

19
x
4

540

482 490
100

205
24
x
4

1175
765
1178.5

60

205
100

430
65

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2025.02.005] 7/13

 Company name:
Created by:
Phone:

Date: 16/01/2025

On request NK 50-160/167 AA1F2KESBQQENW1 50 Hz

+T +T +T

CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY

IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
TO AMPLIFIER
RELAY
L1 L2 L3

THERMISTORS PTC ACCORDING TO DIN 44082

+T +T +T

TO AMPLIFIER
RELAY
L1 L2 L3

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2025.02.005] 8/13

 Company name:
Created by:
Phone:

Date: 16/01/2025

On request NK 50-160/167 AA1F2KESBQQENW1 50 Hz

Input Sizing result

Size by Pump family Type NK 50-160/167

Select pump family NK, NKE, NKE Series 2000, NK Bare Quantity 1
shaft Motor 11 kW
Journey Standard
Select product group NK
Lifecycle cost calculation Flow 81.5 m³/h
Load profile Standard profile Head 35.43 m
Heating season 285 days
Power P1 10.74 kW
Reduced night-time duty No
Control mode Prop. pressure Power P2 required in the duty point 9.789 kW
Decrease at low flow 50 % Eta pump 80.2 %
Energy price 0.32 EUR/kWh Eta pump+motor 73.1 % =Eta pump * Eta motor
Increase of energy price 6% Energy consumption 50979 kWh/year
CO2 emission intensity 0.57 kg/kWh
CO2 emission 29100 kg/Year
Calculation period 15 years
How detailed do you want your life Simple LCC analysis Price On request
cycle cost analysis? Life cycle cost 405706 EUR /15Years

Load Profile
H NK 50-160/167, 50Hz eta
1 2 3 4 [m] [%]
Q = 81.5 m³/h
Flow (%) 25 50 75 100 H = 35 m
Flow (m³/h) 20.25 40.5 60.75 81 Pumped liquid = Water
Liquid temperature during operation = 20 °C
Head (%) 114 114 110 102 40 167 mm Density = 998.2 kg/m³

Head (m) 39.84 39.87 38.46 35.53

P1 (kW) 6.204 7.703 9.233 10.71 35

Eta total (%) 35.4 57.0 68.8 73.1

Time (h/a) 3010 2394 1026 410 30

Energy consumption (kWh/Year) 18675 18441 9473 4391

25 100
Quantity 1 1 1 1

20 80

15 60

10 40

5 20
Eta pump = 80.2 %
Eta pump+motor = 73.1 %
0 0
0 10 20 30 40 50 60 70 80 90 Q [m³/h]

P NPSH
[kW] [m]
P1

10 P2 20

5 10

P1 = 10.74 kW
P2 = 9.789 kW
NPSH = 3.38 m
0 0

Printed from Grundfos Product Centre [2025.02.005] 9/13

 Company name:
Created by:
Phone:

Date: 16/01/2025
Installation and Input Sizing Results
Product number: On request
Type: NK 50-160/167
Quantity: 1
Motor: 11 kW
Flow: 81.5 m³/h
Head: 35.43 m
Power P1: 10.74 kW
Eta pump: 80.2 %
Eta pump+motor: 73.1 % =Eta pump * Eta motor
Energy consumption: 50979 kWh/year
CO2 emission: 29100 kg/Year
Price: On request

Load profile
1 2 3 4
Flow (%) 25 50 75 100
Flow (m³/h) 20.25 40.5 60.75 81
Head (%) 114 114 110 102
Head (m) 39.84 39.87 38.46 35.53
P1 (kW) 6.204 7.703 9.233 10.71
Eta total (%) 35.4 57.0 68.8 73.1
Time (h/a) 3010 2394 1026 410
Energy consumption (kWh/Year) 18675 18441 9473 4391
Quantity 1 1 1 1

Pump Curve Dimensional Drawing

H NK 50-160/167, 50Hz eta
[m] [%]
Q = 81.5 m³/h
H = 35 m
Pumped liquid = Water
Liquid temperature during operation = 20 °C
40 167 mm Density = 998.2 kg/m³

35

245
180

30 80
19
4 x

25 100

20 80
50

15 60
19
x
4

540
10 40
482 490
100

5 20
205

Eta pump = 80.2 %

Eta pump+motor = 73.1 %
0 0
0 10 20 30 40 50 60 70 80 90 Q [m³/h]
24

P NPSH
x

[kW] [m]
4

1175
765

P1
1178.5

10 P2 20
60

5 10
205
100

P1 = 10.74 kW 430
P2 = 9.789 kW 65

NPSH = 3.38 m
0 0

Printed from Grundfos Product Centre [2025.02.005] 10/13

 Company name:
Created by:
Phone:

Date: 16/01/2025

Life Cycle Costs - 15 years of operation

Life Cycle Costs [EUR]
550,000

500,000

450,000
NK 50-160/167 AA1F2KESBQQENW1
405706 EUR
100 %
400,000

350,000

300,000

250,000

96%
200,000

150,000

100,000

Energy cost
50,000
Initial cost
0
0

Payback Time
Life Cycle Costs [EUR]
400,000
380,000
360,000 NK 50-160/167 AA1F2KESBQQENW1

340,000
320,000
300,000
280,000
260,000
240,000
220,000
200,000
180,000
160,000
140,000
120,000
100,000
80,000
60,000
40,000
20,000
years of operation
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Printed from Grundfos Product Centre [2025.02.005] 12/13