25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology

New Delhi ✈ Bali (Denpasar)

India ✈ Ayodhya from Rs22,736

Search

India ✈ Dubai
from Rs4,560 from Rs14,905
Search

New Delhi ✈ Hyderabad

Search from Rs7,134

Search
*

Manufacturing Technology: Unit II: Turning Machines

solved anna university problems on

machining time
Turning Machines - Manufacturing Technology

Home | All Subjects | MECH Department | Manufacturing Technology

<< Previous Next >>

solved anna university problems on machining time: Turning Machines - Manufacturing

Technology

SOLVED ANNA UNIVERSITY PROBLEMS ON MACHINING TIME

AU Problem 2.2

A blank 180 mm long and 70 mm diameter is to be machined in a lathe to 175 mm long

and 60 mm diameter. The workpiece rotates at 450 rpm, the feed is 0.3 mm/rev and the
maximum depth of cut is 2 mm. For turning operation; the approach plus over-travel
distance is 6 mm. Assuming that the facing operation is done after the turning. Calculate
the machining time.

Similar to Problem 2.21 on Page 2.60.

[ Ans:- Turning‘time = 4.13 min; Facing time = 0.66 min and Total time, T = 4.79 min]

AU Problem 2.3

A hollow workpiece of 50 mm diameter and 200 mm long is to be turned over in 4 passes.

If the approach length is 20 mm over travel 10 mm, feed 0.8 mm/rev and cutting speed
30 m/min. Find the machining time.

Similar to Problem 2.19 on Page 2.59.

[Ans:- T = 6 min.]

AU Problem 2.4

https://mech.poriyaan.in/topic/solved-anna-university-problems-on-machining-time-31745/#google_vignette 1/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology

Calculate the change gears to cut a single start thread M16 of 2 mm pitch on a centre
lathe, having a lead screw of 6 mm pitch. (A typical set contains the following change
gears with number of teeth: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 and 70).

Solution:

The gear train consists of 20 teeth on the driver and 60 teeth on driven (lead screw gear)

to be used without intermediate gear. Ans.

AU Problem 2.5

India ✈︎Ayodhya

from Rs4,560 Search

*

A high-strength cast-iron bar 200 mm in diameter is being turned on a lathe at a depth

of cut d = 1.25 mm. The specific power required to machine cast iron is 3.3 W.s/mm3.
The lathe is equipped with a 12 kW electric motor and has a mechanical efficiency of
80%. The spindle speed is 500 rpm. Estimate the maximum feed that can be used before
the lathe begins to stall.

Given data:

D = 200 mm

d = 1.25 mm

Specific power, Ps = 3.3 W.s/mm3

India ✈ Malaysia
from Rs8,247

Search

P = 12 kW = 12000 W

η = 80%

N = 500 rpm

Solution:

https://mech.poriyaan.in/topic/solved-anna-university-problems-on-machining-time-31745/#google_vignette 2/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology

Actual power consumption of motor = P/η = 12/0.8 = 15 kW

AU Problem 2.6

Mumbai ✈ Kolkata
India ✈ Ayodhya from Rs8,805
Search

from Rs4,560 New Delhi ✈ Kolkata

from Rs9,145
Search
Search

India ✈ Dubai Zagreb ✈ New Delhi New Delhi ✈ Bali (Denpasar)

from Rs14,905 from Rs38,220 from Rs22,736

Search Search Search
*

A 150 mm long, 12.5 mm diameter 304 stainless steel rod is being reduced in diameter to
12.0 mm by turning on a lathe. The spindle rotates at N = 400 rpm, and the tool is
travelling at an axial speed of 200 mm/min. Calculate the cutting speed, material
removal rate, cutting time, power dissipated and cutting force.

Given data:

L = 150 mm

D1 = 12.5 mm

D2 = 12.0 mm

N = 400 rpm

Va = 200 mm/min

Solution:

https://mech.poriyaan.in/topic/solved-anna-university-problems-on-machining-time-31745/#google_vignette 3/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology

Specific power for stainless ranges from 2-5 Ws/mm3. It is assumed as 4Ws/mm3.

We know that

Power consumption,

P = Specific power × MRR = 4 × 1924.23/60 = 128.28 W

Manufacturing Technology: Unit II: Turning Machines : Tag: : Turning Machines -

Manufacturing Technology - solved anna university problems on machining time

https://mech.poriyaan.in/topic/solved-anna-university-problems-on-machining-time-31745/#google_vignette 4/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology

Home | All Subjects | MECH Department | UNIT: Manufacturing Technology

<< Previous Next >>

Related Topics

Turning Machines - general purpose machine tools

principle and operation centre of a centre lathe - Turning Machines - Manufacturing

Technology

constructional features of a centre lathe - Turning Machines - Manufacturing Technology

specification of a lathe - Turning Machines - Manufacturing Technology

Types of lathe - Turning Machines - Manufacturing Technology

Headstock mechanisms - Back Geared Headstock, All Geared Headstock

Feed Mechanism - Turning Machines - Manufacturing Technology

work holding devices - Turning Machines - Manufacturing Technology

lathe operations - Turning Machines - Manufacturing Technology

Taper turning methods - Turning Machines - Manufacturing Technology

solved problems on taper turning methods - Turning Machines - Manufacturing Technology

Thread cutting methods - Turning Machines - Manufacturing Technology

special attachments - Turning Machines - Manufacturing Technology

surface roughness in turning - Turning Machines - Manufacturing Technology

Machining time and power estimation - Turning Machines - Manufacturing Technology

Related Subjects

Manufacturing Technology

ME3493 4th semester Mechanical Dept | 2021

Regulation | 4th Semester Mechanical Dept
2021 Regulation

https://mech.poriyaan.in/topic/solved-anna-university-problems-on-machining-time-31745/#google_vignette 5/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology

We provide Notes, Study material pdf download, lecture notes, important questions and answers, University question paper pdf download,
Question bank for Engineering students in Tamilnadu under Anna University Affiliated colleges. EEE, ECE, MECH, CIVIL, CSE, IT are the major
departments covered by our website. [2021 Regulation, All 8 semester, All 4 years ]

About | Contact Us | Privacy Policy | Terms and Conditions | Disclaimer | DMCA Complaint | Upload Content | Send Content

© 2024 - 2025 Copyright: poriyaan.in

https://mech.poriyaan.in/topic/solved-anna-university-problems-on-machining-time-31745/#google_vignette 6/6