Scribd
Upload
3 views

First pages of report (AutoRecovered) final

The document is a dissertation titled 'Material Characterization of Cold Formed Steel Section' submitted by a group of students for their Bachelor of Technology degree at MIT, Chh. Sambhajinagar. It includes sections on introduction, literature review, objectives, system development, test procedures, results, and conclusions. The work was supervised by Dr. Hashmi Syed Suhel and acknowledges contributions from various faculty members.

Uploaded by

181348omkarpopalghat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

First pages of report (AutoRecovered) final

The document is a dissertation titled 'Material Characterization of Cold Formed Steel Section' submitted by a group of students for their Bachelor of Technology degree at MIT, Chh. Sambhajinagar. It includes sections on introduction, literature review, objectives, system development, test procedures, results, and conclusions. The work was supervised by Dr. Hashmi Syed Suhel and acknowledges contributions from various faculty members.

Uploaded by

181348omkarpopalghat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

“Quest for Excellence”

MATERIAL CHARACTERIZATION OF COLD FORMED


STEEL SECTION

Submitted by
OMKAR U. POPALGHAT (T2121261191606)
OMKAR G. AKHARE (T2121261191571)
UMESH B. PAWDE (T2121261191581)
PRATIK M. BAGUL(T2121261191612)
SHAILESH CHAVAN (T2121261191565)

In partial fulfillment for the award of


Bachelor of Technology

DR. Hashmi Syed Suhel


Guide
Civil Engineering Department
MIT, Chh. Sambhajinagar
Affiliated to Dr. Babasaheb Ambedkar Technological University, Lonere District Raigad
Maharashtra State, India
(2023 - 2024)
CERTIFICATE

This is to certify that, the Dissertation entitled “MATERIAL CHARACTERIZATION


OF COLD FORMED STEEL SECTION” submitted by OMKAR U. POPALGHAT,
OMKAR G. AKHARE, UMESH B. PAWDE, PRATIK M. BAGUL, SHAILESH
CHAVAN is a bonafide work completed under my supervision and guidance in partial
fulfillment for the award of degree of Bachelor of Technology of Dr. Babasaheb
Ambedkar Technological University, Lonere (M.S, India).

Place: Chh. Sambhajinagar


Date:

Dr. Hashmi Syed Suhel


Guide Dr. P. R. Awsarmal
Civil Engineering Department, hced
Marathwada Institute of Technology Civil Engineering Department,
Chh. Sambhajinagar Marathwada Institute of Technology
Chh. Sambhajinagar

Dr. N. G. Patil
Director
MIT
Chh. Sambhajinagar
DECLARATION

We hereby declare that this written submission presents our ideas in our own word. We
have adequately referred the original sources. we also declare that we have adhered all
the principles of honesty and integrity and have not misprinted or fabricated or falsified
our idea/data/fact/source in our submission. We understand that any violation of the
above will be cause for disciplinary action by the institute
.

Place: Chh. Sambhajinagar Name of student/ PRN No :

OMKAR U. POPALGHAT (T2121261191606)


OMKAR G. AKHARE (T2121261191571)
UMESH B. PAWDE (T2121261191581)
PRATIK M. BAGUL(T2121261191612)
SHAILESH CHAVAN (T2121261191565)
ACKNOWLEDGEMENT

We would like to express our gratitude towards our guide Dr. Suhel Hashmi at every
step in the study of this work, contributed with his valuable guidance and provided with
perfect solution for every problem that arise. We would like to express our sincere and
hearty thanks to our respected Dr. P. R. Awsarmal, HCED and Dr. N.G. Patil, Director
of MIT Chh. Sambhajinagar for their insightful comments during the work. Our thanks
go to all staff members of Civil Engineering Department, MIT who helped us in
completion of this work.

Name of Student / PRN No :

OMKAR U. POPALGHAT (T2121261191606)


OMKAR G. AKHARE (T2121261191571)
UMESH B. PAWDE (T2121261191581)
PRATIK M. BAGUL(T2121261191612)
SHAILESH CHAVAN (T2121261191565)
INDEX
Sr Contents Page no
No
1 Introduction 1
2 Literature review 4
2.1 Objectives 7
2.2 Necessity 8
3 System developed 9
3.1 Preparation of test specimen 9
3.2 Universal testing machine 10
4 Test procedure 12
5 Results and Discussion 17
6 Conclusion 19

Sr Figure Page no
No
1 Metal Laser Cutting Machine 9
2 Cold formed channel section 10
3 Flat coupons 10
4 Universal Testing Machine 11
5 Test Conducting 12
6 Coupons Testing In UTM 13
7 Failed Flat Coupons 15
8 Failed Curved Coupon 15

Sr Table Page no
No
1 Co-ordinates of stress strain graph 14
2 Comparison between Flat and curved coupon 16

You might also like