Scribd
Upload
7 views

Mini Project_BMKU2323

The document outlines the terms of reference for a project in the BMKU 2323 course, which accounts for 30% of the total coursework. It includes objectives such as product design using CAD, enhancing SolidWorks skills, and fostering teamwork, with specific guidelines for project proposals and reports. The project requires the creation of an original product by combining three selected items, along with detailed technical drawings and specifications.

Uploaded by

wmzailimi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

Mini Project_BMKU2323

The document outlines the terms of reference for a project in the BMKU 2323 course, which accounts for 30% of the total coursework. It includes objectives such as product design using CAD, enhancing SolidWorks skills, and fostering teamwork, with specific guidelines for project proposals and reports. The project requires the creation of an original product by combining three selected items, along with detailed technical drawings and specifications.

Uploaded by

wmzailimi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

COMPUTER AIDED DESIGN AND MANUFACTURING

BMKU 2323 SEMESTER 2 SESSION 2024/2025

TERMS OF REFERENCE OF THE PROJECT


1.0 INTRODUCTION
This project is one of the passing requirements for BMKU 2323. The project worth 30% of
the total coursework which include 5% of project proposal and 25% of final report.

2.0 OBJECTIVES
2.1 Product design and development using Computer Aided Design (CAD).
2.2 Enhance students’ skills on SolidWorks software.
2.3 Develop teamwork among group members.

3.0 SCOPE OF PROJECT


3.1 Group members
• Each group consists of no more than 4 students.
• Tasks shall be divided evenly among group members.
• Members who are not performing their role effectively shall be penalized.

3.2 Product of the project


• The product must be original and must not be copied from other sources.
• The design must be realistic, ergonomic, and suitable for mass production.
• The final design and its function must come from combination of any three products; for
example: table fan, radio and study lamp (these are the three main products that have
been selected at the first stage). Second stage: By using your own creativity, combine
these entire three products become one product together with the functions. You need
to come out with your own idea and design for this final product. Figure 1 shows an
example of this particular statement.
• You have to come out with:
- Orthographic drawings together with dimensions for each of a single part of the final
product.
- Assembly drawings (in a form of orthographic views). No dimensions are needed for
assembly drawings.
- Exploded of an assembly drawing (only isometric view) come together with
“balloons” and also “Bill of Materials” table. No dimensions are needed for exploded
drawings.

First stage:

Table fan Radio Study lamp

Second stage: FINAL PRODUCT

Lamp/Light

Fan

Radio

Figure 1. Example of the final product based from the three selected products.
4.0 PROJECT PROPOSAL (5%)
4.1 Project proposal should be submitted for approval on week 5
4.2 The project proposal should be prepared in A4 size with not more than five (5) pages
including the front page.
4.3 The proposal should include a list of team members and their job scopes.
4.4 A brief abstract and project description should be clearly presented including
preliminary ideas, schematics, or related photographs/pictures/images.
4.5 A Gantt chart with milestones for overall project should be included.

5.0 PROJECT REPORT (25%)


5.1 A complete group project report must be submitted on week 14
5.2 The project report should be submitted in English, typed using Times New Roman font
with font size of 12, 1.5 spacing, justified paragraph alignment, and page numbers are
placed at the bottom right of every page.
5.3 The project report should be printed on A4 and A3 size papers with margin set at 2.54
cm at the top, bottom, left and right of every pages.
5.4 Both version of the report, hard copy and soft copy are required for submission (in
SolidWorks files).

5.5 Report format and marks.


No Items Marks Remarks
(%)
1 Front page 5 UTeM logo, title of the project, section and group
2 Table of contents
3 Abstract A brief review made in a single paragraph which
explain objective of the project, introduction to
the product, explanation on the how the product
works and a conclusion
4 Introduction and 15 -Objective of the project
design ideas -Team member job scope
-Brief explanation on the products design such as
overview of the products
- design ideas and historical development on the
product etc.
5 Product technical 20 Includes product background, product function
specifications and and working mechanism.
methodology -Description on step in SolidWorks command to
build the part modelling/assembly for only five
selected/complex part (print screen mode).
6 Discussion 10 -Discussion on how the product works
-Discussion on techniques/new techniques and
difficulties to design the product
-Ideas to improve the product
7 Technical Drawings 45 All technical drawing produced must consist:
- Orthographic views of parts including section
view, dimension and tolerances, etc for each
part.
- Isometric view of the product for each part
- Assembly view of the product; more than one
assembly view if necessary-for transformer
product)
- Exploded view of the product complete with
B.O.M. (more than one exploded view if
necessary- for transformer product)
8 Conclusion 5 Conclusion based on objectives of project
9 References any books, journals, or websites used for theory,
procedure, or discussion

You might also like