Equipment Portal

Automated Logic’s Equipment Portal (EQ-PRTL) sets a new standard for integrating other manufacturers’
equipment into WebCTRL®. EQ-PRTL is a powerful gateway to a single piece of equipment /device using
proprietary or open protocols such as Modbus and LonWorks. Support for BACnet® over ARCNET 156 kbps and
MS/TP communications are standard.

Key Features and Benefits

• Serves as an economical field gateway to a single piece of equipment/device utilizing an open or proprietary
protocol. (Note: Maximum of 100 integration points per EQ-PRTL.)
• Optional Lon Plug-in Card eliminates need for Lon SLTA when integrating to Lon devices.
• Graphically programmable via EIKON®, EQ-PRTL is able to execute complex integration control strategies at the
field level.
• Built-in support for Automated Logic’s line of backlit LCD display/keypad (BACview) provides the option of
installing a local user interface for monitoring and control.
• Built-in support for Automated Logic’s line of RS room sensors provides the flexibility of remote room
temperature sensing.
• Battery backed real-time clock ensures full continuity of operation in the
event of power failures and communications failures.
• Non-volatile, battery-backed RAM stores application programs, trends,
and other data if power is lost.
• Flash memory makes for easy field upgrades over network.
• 16 bit microprocessor combined with ARCNET 156 kbps 1150 Roberts Boulevard
Kennesaw, Georgia 30144
communications offers ample horsepower and speed for equipment 770/429-3000
integration requirements. Fax 770/429-3001
www.automatedlogic.com
 Equipment Portal
Specifications

BACnet Support: Conforms to the BACnet Application Controller (B-AAC) Standard Device as defined in BACnet
135-2001 Annex L. - Tested to Protocol Revision 9
Communication: The following ports are available:
- BMS Port: EIA-485 port jumper configurable as ARCNET 156 kbps or MS/TP
(9600 bps – 78.6 kbps)
- Equipment Port: EIA-232/EIA-485 software configurable
- Optional Lon Port for using LonWorks communications plug-in device
- Local Computer Access Port for startup and troubleshooting
- R-net Port for support of RS Sensors and BACview local interface
Microprocessor: High speed 16 bit microprocessor with two ARCNET communication co-processors.
Memory: 1M Byte non-volatile battery backed RAM, 1M Byte flash memory, 16 bit memory bus.
(Shelf life of battery is 10 years with 10,000 hours of continuous operation).
Real-time Clock: Battery-backed real-time clock.
Status Indicators: Visual (LED) status of power, network communication, running, and errors.
Module Addressing: Rotary dip switches.
Protection: Built-in surge and transient protection circuitry - internal solid state Polyswitches on the incoming
power and network connections.
Listings: FCC, UL, cUL, and CE.
Environmental Operating Range: -22° to 150°F (-30° to 65.5°C); 10 to 95% relative humidity, non-condensing.
Power Requirements: 24V-ac ± 15% (20.4V-ac to 27.6V-ac), 50 to 60Hz, 7.2VA power consumption (single Class 2
source only, 20VA or less)
Physical: Rugged GE C2950 Cycoloy plastic.
Weight: 9 oz.
Dimensions: 4” (width) by 5” (height) by 1.75”
(LON option card mounts in a separate 3.5” x 3.25” snap track).
102mm (width) by 127mm (height) by 45.5mm
(recommended panel depth, add 19mm for the option card).

Mounting: 2” (width) by 4.8” (height)

51mm (width) by 122 mm (height).
Automated Logic Corporation . 1150 Roberts Boulevard . Kennesaw, Georgia 30144 . 770/429-3000 . Fax 770/429-3001 . www.automatedlogic.com
© United Technologies Corporation 2013. All rights reserved. Copyright Policy
BACnet is a registered trademark of ASHRAE. All other trademarks are the property of their respective owners. Specifications are subject to change without prior notice.
Automated Logic is a part of UTC Climate, Controls & Security, a unit of United Technologies Corp
Made in the USA EQPRTL_CS_r2