PIPE BENDING MACHINE
SUPER 36" - 48"
Design Features
• Two-Stage Pump
• T1 Steel body construction for long life and extra strength
• Calibrated Indicator Rod for precise repeatable pipe bends
• Single operator control station for all functions
• PTFE sealing system in all cylinders
• Designed to bend all grades of API-5L pipe within its range
• Easily towed on the right of way by a suitable tractor
• Towing eye can be raised and lowered by actuating the Stiffback controls
• Hydraulic remote control valve system
• Bend pressure control at operator console
• Large extra capacity filter
• OSHA Gate on operator station
HYDRAULICS
BORE (IN) STROKE (IN) ROD (IN)
InBoard Cylinder 10 5 4.5
OutBoard Cylinder 14 18 9
Pin Up Cylinder 6 23 4
Clamp Cylinder
Pump Type Vane, Fix Volume
Pump Flow 110 gpm
Valve Type 5 Section
Filtration 3 Micron, Pressure Line
Hydraulic System Max Operating Pressure 2500 psig
Hydraulic Reservoir 290 gal 1096 L
Disclaimer:
Technical information provided for this equipment regarding performance, specifications, dimension and weights can vary depending on final
configuration of the equipment. Please contact DMI International for actual specifications at time of shipment.
DMI International does not accept responsibility for errors regarding the technical information, nor the consequences of any errors, nor the
consequences to changes in the specifications contained herein. DMI International reserves the right to modify the equipment performance
and specifications without notice.
15615 E. Pine St. • Tulsa, Oklahoma USA 74116 • Phone 918-483-2213 • Fax 918-438-2061
[email protected] • www.dmiinternational.com #4009812F
PIPE BENDING CAPACITY COMPRESSOR (optional)
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Dia (in) Manufacturer Quincy QR-390, Stand Alone
Minimum 36 Drive Type Deutz Engine
Maximum 48 Pressure 210 pisg
Flow 67.0 acfm @ 175 psig
SPECIFICATIONS WINCH
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Length 32'-3" 9,830 mm Manufacturer Ramsey
Width 12'-6" 3,810 mm Drive Type Hydraulic Motor
Height 10'-10" 3,302 mm Pulling Force 20,000 lbf
Weight (lbs/kg) 120,750 lbs 54,886 kg Cable Diameter .5625"
Track Size 50 Ton Free Wheeling Drum
* actual width may vary
OPTIONS AVAILABLE
ENGINES –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
• Cat C7.1 or Perkins 1206D, 250 hp, Tier 3 (Export Only)
Perkins, 1206F, Tier 4 250 hp
• Hydraulic Air Compressor
Operating Speed 2200 rpm
• Hydraulic Mandrel controls with five section valve & 3/4”
Fuel Tank 80 gal
quick disconnect couplings
• Working lights
• Cold weather operating kit (-40˚) available
NOMINAL MAXIMUM WALL THICKNESS BY GRADE RECOMMENDED BEND
PIPE O.D.
DEGREE PER RADIUS MAXIMUM 40 FOOT
IN/MM X52 X60 X65 X70 X80 X100
ARC FOOT FEET JOINT
48/1219 - - - 1.857 1.613 1.278 0.50 115 12.75
46/1168 - - - - 1.779 1.405 0.50 115 12.75
44/1118 - - - - 1.975 1.544 0.50 115 12.75
42/1067 - - - - - 1.731 0.50 115 12.75
40/1016 - - - - - 1.946 0.55 115 12.75
38/965 - - - - - - 0.58 115 12.75
36/914 - - - - - - 0.05 115 12.50
SPECIFICATIONS FOR SUPER 36" - 48" BENDING SETS
LENGTH WIDTH HEIGHT
in mm in mm in mm
Super 36 - 48 Stiffback 114 2896 53 1346 25 635
Pin Up 53 1346 53 1346 25 635
Die 81 2057 54.5 1384 25 635
Clamps 32 813 23 584 13 330
*Dimensions shown for bending sets are shipping dimensions
